Used Bianco 280 M Sa for sale (71,965)

Year of construction: 2008, condition: used, Asparagus peeling machine with eight stations The Hepro Schäl-Automat HSM-180/SAP peels asparagus automatically. Spears are loaded and carried past the peeling heads, which remove the skin evenly. The machine has eight stations that can be switched on or off individually; peeled spears come out onto the side table. The rating plate shows it was built in 2008 by Hepro GmbH in Delbrück (Germany), supply 400 V, 50 Hz, 3 phase, 0.5 kW. The machine stands on castors. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Asparagus peeler (Schäl-Automat) Stations: 8, each switchable Fsdpfxjz Nc Tys Al Sopn Power supply: 400 V, 50 Hz, 3 phase, 0.5 kW Construction: Stainless steel, on castors

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 28.22.0079, Year of construction: 2022, operating hours: 6,700 h, overall weight: 1,870 kg, laser power: 700 W, operating pressure: 8 bar, inner dimension height: 365 mm, inner dimension length: 280 mm, No minimum price – guaranteed sale to the highest bidder! The system has been serviced annually by SLM Solutions. Service reports and machine assessment are available upon request. The system includes the “SLM280 2.0 complete material change kit incl. PSM100” and a second set of filter housings, minimizing the effort required to switch between two materials. TECHNICAL DETAILS Laser power: up to 700 W Materials: suitable for all common materials in the SLM process Temperature range: 20–25 °C Relative humidity: max. 60 % Floor unevenness: max. 5 mm/m² Floor load capacity: min. 2,200 kN/m² Floor surface: antistatic, solvent-resistant, impermeable to liquids, smooth Processing area and process data Build volume (L x W x H): 280 x 280 x 365 mm Actual build rate: up to 113 cm³/h Variable layer thickness: 20–90 µm Minimum feature size: 150 µm Beam focus diameter: 80–115 µm Scanning speed: max. 10 m/s Laser type: IPG fiber laser Single laser 700 watts Media supply Operating pressure argon: 7–8 bar Operating pressure nitrogen: 7–8 bar Operating pressure compressed air: 7–8 bar Operating pressure cooling water: 4 bar Compressed air quality: ISO 8573-1:2010 [1:4:1] Volume flow rate primary circuit: 1.4 m³/h Cooling water inlet temperature min.: 18 °C Cooling water inlet temperature max.: 20 °C Cooling medium: Coolflux Fedey Rn A Iepfx Al Sepn MACHINE DETAILS Control system: SLM MCS Electrical connection values Connection: CEE 3/N/PE Voltage: 400 ±10 % V Frequency: 50/60 Hz Current draw: max. 40 A Connected load: 3.5–5.5 kW Heating power: 1,200 W Cooling power: 4.6 / 5.8 kW Largest motor: 7.5 kW Dimensions & weight Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm Shipping weight: 1,870 kg Operating hours: approx. 6,700 h EQUIPMENT Cooling is provided by “Cooling unit HRS050 L/W” Sieving station PSM100 V3 Handling device BPH280 and bottle lift (facilitates handling of powder containers and removal of substrate plates after printing) SLM280 2.0 complete material change kit incl. PSM100 Powder containers Substrate plates (1.2709 & AlSi10Mg) Additional filter housings Filter elements The system is currently still in operation and can be inspected by appointment. After the auction, the system will be disassembled by the machine manufacturer, loaded onto the company premises, and handed over to the buyer.

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Fjdpfxjzwgiqj Al Sspn

Condition: used, Year of construction: 1998, cutting diameter 280 mm saw band length . mm Fpsdeucgxzepfx Al Ssn cutting width . mm total power requirement . kW weight of the machine ca. 1 t dimensions of the machine ca. . m

Condition: used, Year of construction: 1990, saw blade diameter 400 mm cutting length 400 mm cutting diameter 130 mm speeds 9,5 - 48 U/min peripheral speed 12 - 60 m/min 130 mm 125 mm 400 x 125 mm 130 mm 110 mm rechts 200 x 125 mm links 280 x 125 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,2 x 2,0 x 1,7 m Fsdpfx Asuia Hrel Sspn

Condition: good (used), Year of construction: 1996, GALLUS Arsoma EM 280-8 Colour Flexo Printing Press Model: EM280 Year of manufacture: 1996 Configuration: • 8 flexo printing units • 8 hot air dryers • GEW UV curing system (1x) • Turn bar (web turning device) • Sheet delivery (stream delivery) • BST Powerscope 4000 web inspection system Technical Data (approx.): • Max. web width: 280 mm • Print width: approx. 260–270 mm • Repeat length: approx. 250 – 520 mm • Unwinder: max. roll diameter approx. 800–1000 mm • Rewinder: max. roll diameter approx. 800–1000 mm • Mechanical speed: up to approx. 120 m/min • Substrate range: self-adhesive labels, paper, film and flexible packaging materials The machine offers a robust and proven solution for label production, providing high flexibility due to the combination of conventional drying and UV curing systems. This enables the processing of a wide range of materials and applications. A key advantage of this press is the included tooling package, which significantly reduces the need for additional investment and allows for immediate production start-up. Scope of delivery includes: • Printing cylinders • Anilox rollers Fsdpfxey A Nhis Al Sepn • Magnetic cylinders This added value ensures high versatility and cost-efficiency for future production needs.

Year of construction: 2002, condition: used, We offer this used MAPLAN MTF 1500/280, year of manufacture 2002. Machine type: MTF 1500/280 Serial number: 1120157 Year of manufacture: 2002 Connected load: 66 kW Control type: B&R - CP260 Panel type: Maplan PC 4000 - DOS Year of manufacture: 2002 Condition: ready for operation (used) Operating hours: 86,018h Description: Clamping force: 2800kN Injection volume: 1500ccm Distance between tie bars (width): 600mm Fodpfx Asyf E Nael Sopn Distance between tie bars (length): 220mm Heater plate size (LxW): 630/500mm Daylight (distance between open plates): 500mm Connected load: 66kW Power supply: 3x 400V/50Hz Machine dimensions (LxWxH): approx. 3.30x3.30x3.20 m Machine weight: approx. 7000kg Input current type: standard industrial three-phase Equipment: documentation If you have any further questions or require more information, please send us a message or call us.

Condition: excellent (used), strip width: max. 1.560 Fpodpfx Alsu H U Eye Sen strip thickness: 1 - 7 mm blade shaft Ø: 280 mm speed: max. 120 m/min Overhauling: 2017

Condition: excellent (used), strip width: max. 1.560 strip thickness: 1 - 7 mm blade shaft Ø: 280 mm speed: max. 120 m/min Fedpfx Asu H U Hdol Sopn Overhauling: 2017

Condition: new, Year of construction: 2024, neu 2024 6254 prompt, Zwischenverkauf v Italien Fodowiqndepfx Al Sspn 15040 € 288.77 € 1 Doppelsäulenführung 3270x27x0,9 mm 40/80 m/min 300 mm 300 mm 350x260 mm rund 210 mm, quadrat 210 rund 110 mm, quadrat 110 830 mm 1.5 kW 1500 mm 1600 mm 1900 mm 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Manufacturer warranty until 31.12.2026 OPTIONS: Roller tables and band saw blades on request

Condition: ready for operation (used), Year of construction: 2022, clamping force: 900 kN, screw diameter: 36 mm, Hydraulic injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 900/280 A ECO features a clamping force of 900 kN and a maximum injection pressure of 2,340 Bar. It includes a screw diameter of 36 mm and a maximum injection volume of 121 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 900/280 A ECO machine we have for sale. Contact us for further details. • Space between columns (tie-bar spacing): 360 x 360 mm • Maximum mold height: 390 mm Fpodpoz Dk Tqofx Al Ssn • Minimum mold height: 150 mm • Maximum injection volume: 121 cm3 • Maximum injection pressure: 2,340 bar • Centering ring: 125 mm • Hot runners in the machine: 6 • Core puller: 2 • Pneumatic valve: 2

Condition: used, Year of construction: 2020, functionality: fully functional, - Milling spindle 2 x 3.5 kW - Upper and lower drilling heads - Dado saw - Barcode reader Used machining center Manufacturer: Masterwood Type: MasterDrill TF 600 SA Year of manufacture: 2020 With the TF 600 SA machining center, panels can be processed one after the other in various sizes without interruption from all 6 sides. The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatic measurement of the workpiece thickness. Max. feed rate of the grippers: 130 m/min. Minimum and maximum workpiece dimensions: - Workpiece thickness: 8 ~ 60 mm - Workpiece length: 400 ~ 2500 mm - Workpiece width: 400 ~ 950 mm Drilling heads: - The drilling heads are manufactured in one piece from an aluminum alloy. Two drilling heads process the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine with high drilling performance. Upper drilling heads: - Vertical drills in X direction: 7+7 - Vertical drills in Y direction: 5+5 - Horizontal drills in X direction: 2x2 + 2+2 - Horizontal drills in Y direction: 2+2 Lower drilling head: - Vertical drills: 3x3 Dado saw: - A dado saw mounted on the upper drilling head near the stop allows grooves to be cut in the X direction (maximum diameter of the saw blade = 125 mm). Grooves can be cut from a minimum of 55 mm and a maximum of 850 mm. Milling spindle 2 x 3.5 kW: Technical data: - Maximum power: 3.5 kW - Maximum speed: 18,000 rpm - Clockwise/counterclockwise rotation - Operation via inverter - Tool holder ER 25 Fpsdozux T Njpfx Al Ssn - Air cooling The positioning accuracy of the units is +/- 1/10 mm Automatic workpiece discharge: Motorized conveyor belt with sensor control. CNC and software: - The machine table is fully controlled by NC and guarantees continuous fixing of the panels in all working positions. All movements are designed to enable the widest possible support surface on the workpiece. Clamping devices are activated depending on the work unit. The table is equipped with an NC-controlled side alignment device, which ensures perfect alignment of the workpiece panel. Masterwork: - Masterwork enables the machine operator to quickly and easily program. The software can import the most important data formats such as DCF and XML. Master Drill: Human-machine interface for managing operational activities (maintenance/setup). Trepan: An interface that the operator uses for manual and setup operations. Barcode reader: - Motorized roller conveyor for feeding workpieces into the infeed. - CAM start software package for Masterwood TF 600 SA - Automatic barcode scanner at the infeed Note: The technical data and descriptions are transcripts from the original order confirmation. Data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2004, functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 280 mm, conveyor belt speed: 90 mm/s, total length: 3,300 mm, total width: 650 mm, total height: 2,500 mm, overall weight: 150 kg, discharge height: 2,360 mm, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: Panasonic, Equipment: type plate available, TAF item number: 1000005822 Manufacturer: Fimatech Year of manufacture: 2004 Overall dimensions (LxWxH) in mm: 3,300 x 650 x 2,500 Width incl. side panel in mm: 320 Width incl. drive in mm: 600 Side height in mm: 310 Conveyor length, total in mm: 4,000 Conveyor length, horizontal in mm: 1,000 Conveyor length, vertical in mm: 3,000 Conveyor width in mm: 280 Belt type: Plastic slats / link chain belt Fjdpfxjx R Dwue Al Sepn Belt width in mm: 290 Cleats (cleat height/cleat pitch) in mm: 25 / 460 Substructure: rollable / height-adjustable Sliding surface: steel Inlet height in mm: max: 340 min: 280 Outlet height in mm: max: 2,360 min: 2,300 Drive: head drive Motor type: gear motor Motor data: Panasonic 400V, 50 Hz, 0.5 A Conveyor speed in m/s: 0.09 Net weight in kg: 150 Special features: programmable cycle control Condition: used / fully functional Function test: OK

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm Fsdpfx Alsxvbvvs Sopn - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Year of construction: 2006, condition: ready for operation (used), A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible. Fjdpfoy I Ac Dsx Al Sopn

Condition: used, Year of construction: 2018, Headstock for front and rear attachment Hydraulic side shift / support roller Counter blade Special black paint finish Skid shoes PTO shaft / Fedpfx Aloual S Ue Sepn

Condition: used, Year of construction: 2007, operating hours: 40,933 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 8,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 280 C Operating hours: 40.933h Year of construction: 2007 Control unit: Siemens 840D PL Spindle: 8.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Tool magazine / places (Options): Rack / 234 (Operating panel at the tool loading station with terminal) Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 100 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: mechanical Fpedpfexwpmxox Al Sjn Additonal options: Receiver for measuring probe (RENISHAW); interface exhaust system; additional weight for pallets; drill fracture sensing; status lamp; interface exhaust system; integrated tool and collision monitoring; toolshaft cleaning; tool codechip; Interface handheld;

Condition: good (used), 1 used surface grinding machine Manufacturer: Geibel und Hotz Model: FS 50 Optimus SA Technical data Design: Hydraulic Maximum distance between table and spindle center: 400 mm Longitudinal travel (X-axis): 580 mm Cross travel (Y-axis): 250 mm Table speed: Infinitely variable from: 2 m/min up to: 28 m/min Automatic vertical feed: Grinding wheel speed: from: 2800 rpm Connection 50 Hz 3-phase: 400 Volt Grinding spindle motor: 2.2 kW Total power requirement: 7 kW Machine weight approx.: 2000 kg Fpedpfew Suyhjx Al Sjn Machine dimensions: Length: 1800 mm Width: 1200 mm Height: 2250 mm

Condition: new, functionality: fully functional, total height: 1,640 mm, total length: 1,400 mm, total width: 1,100 mm, overall weight: 267 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Extraction table, welding and grinding table. Extraction table with a 1.1 kW fan, filter cartridge, and wooden slats, as well as a rear wall with extraction and a ceiling and side walls without insulation. The extraction table with automatic compressed air cleaning filter and integrated fan for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Extraction capacity: 960 m³/h Dust class: M Working area W/D in mm: W 892 / D 765 Working height in mm: H 690 - 924 Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1400* / D 1100 / H 1640 (optional L = 1500/2000 mm available) Compressed air connection: Yes, min. 5.5 - max. 6.0 bar (for filter cleaning) Fan power: 1.1 kW Operating voltage: 3 x 400 V, 50 Hz, 2-pole Noise level*: 65 db(A) without cleaning / 85 db(A) without cleaning Pipe connection: D = 250 mm Color: RAL 7042/RAL 7011 Weight: 267 kg * With fan and nozzle Fodpfozdty Nox Al Sopn Application: The extraction table with a fan is used to separate dust and welding fumes from the process air. Suitable for work where vapors and dust are generated, such as welding, grinding, etc. Your advantages of the ISI-Flow Desk series: - 12 device variants available - Filtration with compressed air-cleaned filter cartridge according to dust class M - Automatic filter cleaning by pressing a button on the front - Differential pressure gauge for easy monitoring of the cleaning requirement - Integrated, energy-efficient fan 3x400V, 50 Hz, 2-pole; closed fan blades, backward-curved, self-cleaning impellers; ISO 14694 (BV3 G 6.3) balanced - Rear wall, side walls, and ceiling ensure effective extraction and holistic air flow - Height-adjustable work table - Wide range of mounting and connection accessories - Quality Made in Europe For safe, effective air flow from extraction to exhaust. The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.

Condition: used, Year of construction: 1990, functionality: fully functional, type of input current: AC, input voltage: 220 V, overall weight: 65 kg, total height: 65 mm, total length: 87 mm, total width: 58 mm, number of spindles: 2, 2-spindle paper drilling machine. Fedpfxezvc Ume Al Sopn

Condition: used, functionality: fully functional, Floating grabber excavator plant, complete with floating conveyor belt Manufacturer: Rohr Bagger GmbH Type: RS 8.0/280-G Base year of construction: 1992 Grabber capacity: 8 m³ Fjdpfxozkmmvj Al Sspn Crawler undercarriage with lifting mechanism and counterweights Hydraulic grabber Raking grate with oversized material slide Oscillating feeder Dewatering screen, Svedala, year of construction 1998, type H2PP 6000 x 2500 Excavator discharge conveyor, Bleichert Rohr, year of construction 1996, type TRV 9.1/1000 Transformer station Schneider, year of construction 1996, type TS 61440, 800 kVA Floating conveyor belt system Year of construction: 1992 Total length approx. 250 m, belt width 800 mm Barge / oversized material barge, year of construction 2005, 15 m x 5 m x 2.75 m, loading volume 40 m³, approx. 45 t.

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Semi-automatic compact glass storage system Fodpfx Alszdylxe Sopn 25 positions Maximum glass size: 3210 x 6000 mm Drawer load capacity: 6000 kg Total loading capacity: 150000 kg (150T) Total floor dimensions: L 6100 x W 9200 x H 3050 mm Loading width: 24 pcs. x 170 mm + 1 pc. x 410 mm. In very good and clean condition Good working order, tested As is See video

Condition: good (used), Year of construction: 1988, functionality: fully functional, Surface grinding machine Geibel&Hotz Type FS 40 Primus SA Condition: good Fsdsyh Hutepfx Al Sspn Fully functional

Condition: good (used), Year of construction: 2001, functionality: fully functional, TECHNICAL CONFIGURATION Printing and Drying • 6 flexographic printing units • UV drying system • Hot-air drying system • Combination of UV and water-based ink applications possible, depending on production requirements • Varnishing capability Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Adjustable turn bar system • Turn bar can be positioned flexibly between the individual printing units Converting Equipment • 2 rotary die-cutting stations • 1 die-cutting station equipped with a gap system • Slitting unit • Perforation unit • Inline finishing and converting capability Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration during production Included Accessories The machine is offered together with a selection of production accessories, including: • Magnetic cylinders • Printing cylinders • Anilox rollers A detailed accessory list can be provided upon request. _____ WHY THIS GALLUS EM 280?  Complete Inline Production Solution The machine combines printing, varnishing, die-cutting, perforating, and slitting in one production line. This allows finished labels to be produced in a single pass and reduces additional handling between production stages.  Flexible Six-Color Configuration The six flexographic printing units provide sufficient color capacity for a wide range of standard and premium label applications. The additional varnishing capability enables protective or decorative surface finishing.  UV and Hot-Air Drying The combination of UV and hot-air drying increases production flexibility and allows the machine to process different ink and coating systems.  Flexible Turn Bar System The adjustable turn bar can be positioned between different printing units. This offers additional flexibility for reverse-side printing, adhesive-side printing, and special multilayer label applications.  Two Rotary Die-Cutting Stations The two rotary die-cutting stations allow more complex converting operations to be carried out inline. One station is equipped with a gap system for improved adjustment and production accuracy.  Integrated Quality Inspection Fedjztqcmopfx Al Sopn The camera inspection system supports continuous quality control during production and helps minimize waste caused by printing or registration errors.  Proven Gallus Engineering The GALLUS EM 280 is known for its mechanical stability, long service life, and straightforward operation. It remains a reliable production platform for medium-sized label converters, specialist applications, and international export markets. Very Well-Maintained Condition The machine is located in Germany and has been maintained in very good overall condition. Based on the available information, we rate the machine at approximately: Condition: ★★★★★☆☆ 8 out of 10 stars.

Condition: used, Year of construction: 1992, operating hours: 10,150 h, This Eder mobile crane, model M 825 B, used in the sawmill, was manufactured in 1992 and has approximately 10,150 operating hours. The crane is equipped with a Hultdins SuperSaw tree grapple, including a saw, which can be used to move and shorten logs. Saw blade: 75 cm. Clamp: 58 cm. Rotor: 16,000 kg. If you have any questions or would like more information, please feel free to send us a message or call us. Fodpfxeyzpg Ao Al Sopn