Used Crimpone C1-25Se for sale (2,694)

Year of construction: 2020, condition: good (used), Well-maintained Leica DM IL LED Cellfactory inverted microscope, suitable for cell culture, phase contrast, and routine live-cell observation. Configuration: HI PLAN 4x/0.10 PH0 objective HI PLAN I 20x/0.30 PH1 objective Ibodpfx Agjzhia Hsgea HI PLAN I 20x/0.30 PH1 objective HI PLAN I 40x/0.50 PH2 objective S40/0.45 Leica condenser (521251) HC C-mount 0.50x Slider HC Plan 10x/20 eyepiece(s) Flexacam C1 with remote control Various accessories A robust setup for laboratories, biotechnology, research, and cell culture applications.

Condition: used, mileage: 1,333,000 km, first registration: 10/2012, fuel type: diesel, Year of construction: 2012, Mercedes-Benz Citaro O 530 C1 EEV 41 Seats + 44 Standing Places *Slight accident damage to the front left, but fully operational!! (The bus was driven 500 km to us under its own power without any issues)* *Well-maintained despite mileage!* Drive: ● Automatic ● ZF transmission ● 220 kW / 299 hp ● Intarder ● EURO 5 EEV ● ABS Ibsdpfx Aex Nc Ehoggja ● ASR / deactivatable Equipment: ● 41 comfort seats (including driver) ● 44 standing places ● Interior cameras ● Battery master switch ● Radio ● Double doors at the front ● Double doors at the rear ● Interior lighting ● Lifting and lowering device ● Bus stop brake ● Auxiliary heater ● Auxiliary ventilation ● Air conditioning ● Driver’s air conditioning - 1st owner - German bus, maintained at authorized workshop! - TÜV / General Inspection / Safety Inspection: New on request and at extra cost (windscreen replacement)! Errors and prior sale excepted! = Further Information = Please contact Joannis Arpantzanis or Kai Bühler for more information.

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) MC4 controll Clamping force: 500 t Screw diameter: 80 mm Type: Horizontal Drive: Hydraulic Clamping unit: Clamping force: 500 t Opening stroke: 1260 mm Iodpfxex H Au Rj Aggeba Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Electrical equipment: Voltage: 400 V / 50 Hz Sepro Linear robot available Accumulator English, French, Czech language available. Hours: 61000

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Ibjdpfx Agsxqx Avogea Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Year of construction: 1999, condition: excellent (used), INJECTION MOLDING MACHINE KRAUSS-MAFFAI 150-700 C1 Year of manufacture: 1999 Screw diameter: 55 mm In excellent condition, still in operation. Ibedoh S Dncopfx Aggoa

Condition: ready for operation (used), Electro Adda CF C1 80MT frequency inverter, serial number as shown in the photo, used, with normal signs of wear, 100% functional. PLEASE NOTE: Please request the costs for packaging and shipping separately! Ibsdpei D Hrqefx Aggoa

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 8,000 rpm, bar diameter (max.): 26 mm, number of axes: 7, This 7-axis Maier ML 26 C1 was manufactured in 2000. It features a maximum bar diameter of 26 mm and an impressive spindle speed of 8000 rpm. The machine includes 5 turning tools and 3 axial drilling tools, along with a bar feeder model Iemca Boss 322r-E. If you are looking to get high-quality turning capabilities, consider the Maier ML 26 C1 swiss type turning machine we have for sale. Contact us for further details. • Axis Head 1: • Axes: X, Y, Z, C • Z1 axis travel: 210 mm • Main spindle collet: 161E • Guide bushing: T227 • Tooling: 5 turning tools (16 mm), 3 axial drilling/boring tools, 3 ER16 live tools (up to 8000 rpm) • Axis Head 2: • Axes: X, Z, C • Sub-spindle speed: up to 8000 rpm • Sub-spindle collet: 161E • Back-working: 4 tools (currently set up with 1 turning tool and 3 ER16 live tools), plus 1 ER16 live tool axial with the sub-spindle • Maintenance (2025–2026): • Replaced all pneumatic lines with new, durable lines • Replaced position sensors in main spindle mechanical lock • Replaced position sensors in sub-spindle mechanical lock • Replaced position sensors in sub-spindle work ejector • Mechanical realignment and measurement of main spindle, guide bushing, and sub-spindle Ibsdpfozdr H Ijx Aggja • Realigned sub-spindle frame assembly and sub-spindle back-working tools • Replaced all spindle bearings in sub-spindle assembly • Replaced spindle bearings in sub-spindle axial milling tool • Refurbished live milling tools on sub-spindle side Additional equipment • Bar feeder: Iemca Boss 322r-E, model year 2007, 17 mm guide channels Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), functionality: fully functional, Tool holders, tool mountings - VDI40. The holders have been inspected and are in very good, almost like-new condition. The outstanding quality of well-known manufacturers guarantees high repeatability and very long service life: Order No.: 435_C1 → In stock: 2 units; Price: €56.00/unit Order No.: 430_C2 → In stock: 3 units; Price: €56.00/unit Order No.: 432_B4 → In stock: 2 units; Price: €56.00/unit Order No.: 433_B4 → In stock: 2 units; Price: €56.00/unit For orders of 4 units or more, the above prices include shipping within Germany (BRD). Single unit price: €65.00 net each, plus shipping costs. B3 with right-hand rotation; B4 with left-hand rotation; C1 with right-hand rotation; C2 with left-hand rotation. ----- Short reverse VDI radial tool holder. Tool holder for mounting external turning tools in the normal position, i.e., with carbide inserts facing upwards: C1 with right-hand rotation; C2 with left-hand rotation. Shipping costs: on request. ----- Dimensions: D = 83 mm d-2 = 83/40 mm (45.52) H = 32.5 mm L1 = 75 mm L2 = 22 mm l-4 = Ibedpjzf Hqdefx Aggoa ----- Further VDI40 holders available in our other listings, e.g., VDI40 Form E2 For drilling tools with cylindrical shank with internal and external coolant supply Surface hardened, blackened, and ground finish.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale: 4 x Tacchella PROFLEX C3 / PROFLEX 3 C1 LR/R-B CNC external/internal cylindrical grinding machines. All four machines are from the year 2023 and are equipped with Siemens SINUMERIK ONE CNC controls. They feature hydrostatic guides, a CNC B-axis, an LR/R-B grinding head configuration, Marposs measuring/process monitoring, AE gap crash monitoring, grinding wheel balancing system, workpiece spindle, tailstock, external and internal cylindrical grinding capabilities, and automatic workpiece handling. The machines are designed for medium to large-sized workpieces. According to the PROFLEX C3 parameters, the maximum grinding diameter is up to 600 mm, the maximum workpiece weight between centers is up to 400 kg, the distance between centers is 800 – 2,100 mm, and the maximum grinding length is 400 – 1,600 mm. Clean note in the offer: Isdpszdv S Iofx Aggeba

Condition: refurbished (used), Krauss Maffei injection molding machine 25 tons Ijdpfx Agordg Tpegoba Year: 2000 IPC not working (see map)

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control system: MC4 with color monitor, operator panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould open stroke: 820 mm Min. mould height: 330 mm Max. opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (high speed) Ibedjxak Ucopfx Aggsa 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions & Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 13,000 h, machine/vehicle number: MP2512C1, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,270 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item on time by 15/12/2025!  The machine has been regularly serviced by Amada. TECHNICAL DETAILS Punching working area X x Y: 2,500 x 1,270 mm Laser working area X x Y: 2,000 x 1,270 mm Ijdpfsxzf T Asx Aggeba Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Accuracy: ±0.07 mm Maximum material thickness: 6 mm Press force: 200 kN Max. strokes X-axis: 370 rpm Max. strokes Y-axis: 280 rpm MACHINE DETAILS Power consumption: 22 kVA Machine weight: 18,000 kg Operating hours Laser hours: 13,000 h Punching hours: 17,000 h Note: Information regarding the tools can be found in the attached images.

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements height 405 mm Ibsdpox D Ea Ijfx Aggja Dimensions Machine Length 405 mm Clamping Unit Clamping force 800 kN This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1999, operating hours: 57,830 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,047 cm³, Clamping force 3000 kN Mould opening force, max. 160 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Ijdey Nk Taepfx Aggsba Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1778 bar Stroke volume 1047 ccm Shot weight (PS) 953 gr. Injection rate 400 ccm/s Screw speed 218 1/min Plasticising rate max. 75 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 35 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 12500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads Additional Options: - 1 x Air valve - 3 x Core pulls - Robot interface according to Euromap 12

Condition: used, functionality: fully functional, power: 18.4 kW (25.02 HP), fuel type: diesel, color: yellow, overall weight: 3,650 kg, operation weight: 3,759 kg, number of seats: 1, Year of construction: 2022, machine/vehicle number: 2497348, Equipment: UVV, cabin, rubber tracks, standard shovel, Technical specifications Year of manufacture: 2022 Engine: 18.4 kW, 24.7 hp, diesel Weight: 3.7 t Dimensions (L x W x H): 4.80 m x 1.55 m x 2.48 m Track width: 300 mm Breakout force: 32 kN Displacement: 1.496 l Digging depth: 3.51 m Max. dumping height: 3.53 m Ijdpfxsyqyuzo Aggjba Gradeability: 30% 3 different buckets Fully functional, UVV certified

Condition: used, Year of construction: 1994, Krauss-Maffei KM 65-190 C1, Year of manufacture: 1994, Clamping force: 65 tons, Screw diameter: 35 Ibedpfjyh Rygex Aggja

Condition: ready for operation (used), Year of construction: 1995, Krauss-Maffei KM 125-620 C1 Clamping force 125 tons Year 1995 Screw diameter 50 mm Injection volume 377 cm³ 343 g Tie-bar distance 47x47 cm Iodpfx Agowyx Ruegeba

Condition: excellent (used), Year of construction: 1998, 6 axles Load capacity 120 kg Ijdpeqcwbtofx Aggjba

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design Iodpoqabiaefx Aggeba 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: reconditioned (used), Year of construction: 2015, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 Ijdpfxjnh Rnuo Aggjba - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, type of cooling: water, input voltage: 400 V, Equipment: cooling unit, type plate available, This single-stage absorption chiller is in perfect condition and ready for operation. It runs on hot water and uses Advaguard as the working fluid. Available in two configurations: with the installation container or without it. Power: 1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C Year of Manufacture: 2008 Frequency: 50 Hz Ibodpfsytyiwex Aggoa Voltage: 400 V Working Fluid: Advaguard

Condition: good (used), Year of construction: 1997, Krauss-Maffei KM 110-520 C1 Year: 1997 Screw diameter: 45 mm Clamping force: 110 tons Tie bar distance: 47x47 cm Shot weight: 234 g Ibjdpfeyh Rymox Aggoa

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. Iodsx Dbkcjpfx Aggoba ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Ibjdszudnropfx Aggoa

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 55 kW (74.78 HP), rotor diameter: 520 mm, rotor width: 1,000 mm, Genox GXC1000 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. Ibodpfxezudnfo Aggsa 75kW Drive Motor with outboard rotor bearings (90kW, 110kW & 132kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1000mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 50 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.