Injection molding machine

KraussMaffei KM 250-1900 C1

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Maximum mould opening force: 160 kN Moving platen force – opening: 86 kN Moving platen force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie-bar clearance (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Iiodpfxjw A N Hfs Am Eea Ejector stroke (hydraulic): 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Maximum plasticizing rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Hydraulic oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and additional equipment: - Oil tank - Anti-vibration pads - 3 × core pullers - 8 × hot runner control zones - 2 × air valves - Robot interface according to Euromap 67 Additional information: - Machine located in Poland - Immediately available - Loading, transport, installation, and commissioning can be organized

Condition: like new (used), Year of construction: 2005, functionality: fully functional, turning length: 450 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 65 mm, Siemens 840 D CNC Working area Max. swing diameter on bed 505 mm Swing diameter on X-slide 375 mm Chuck diameter 210 mm Bar capacity 65 mm Transverse travel (X) 213 mm Longitudinal travel (Z) 450 mm Feed rates X/Z-axis rapid traverse 24/30 m/min Main spindle Spindle nose (flat flange) 140 h 5 mm Internal diameter of front bearing 100 mm Spindle motor power (40/100% DC) 16/12 kW Torque (40/100% DC) 153/115 Nm Spindle speed 25 - 6.000 rpm Tool turret Number of tool stations 12 Of which motorized 12 Shank diameter (according to DIN 69880) 30 mm Motor power (40% DC) 9 kW Maximum torque (40% DC) 20 Nm Maximum speed 4.500 min-1 Tailstock Tailstock stroke, automatic 450 mm Center point attachment 4 CM Tailstock thrust, max 400 daN Machine equipment: • Chip conveyor • Provision for fume extractor Iijdpfxsw Adhws Am Eea • 2 axial motorized modules • 4 radial motorized modules • Fixed tool holders

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm Iiodpfx Aovvl Uaem Eoa The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 850 x 410 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] Iedpfx Amsx Tvizo Esia WEIGHT & DIMENSIONS - Machine floor space : 2165 X 2087 [mm] - Machine height : 2345 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of working hours : 3207 [h] EQUIPMENT - CNC : Fanuc 31i model B5 - 3 colors status lamp DIVIDING UNIT * manufacturer : Häberle * model : DTTiB * travel 4th axis : 360 [°] * indexing precision 4th axis : 0.001 [°] * travel 5th axis : -7/+100 [°] * indexing precision 5th axis : 0.001 [°] * tightening type : Pneumatique - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : Renishaw - Workpiece probe : Renishaw - Electric transformer - Milling vice - Tool-holders

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm Isdpfx Ameifn N Nj Eoia - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 21,000 rpm, number of axes: 4, This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Iiodpfsx D N Ntox Am Eja Machine Benefits Technical Machine Benefits • 4 cnc axes, with chick horizontal axis dividing head and support bearing. • 21 tools • X =m 500 mm / y = 400 mm / z = 330 mm • Central coolant system with pump and filtration • Oil tank.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A04B-0105-B133#BBH, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 54 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 54 m/min, table width: 850 mm, table length: 410 mm, table load: 300 kg, overall weight: 2,200 kg, spindle speed (max.): 10,000 rpm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2x FANUC Robodrill α-D21MiB5 Plus Iodpexwiglofx Am Esia

Condition: new, Year of construction: 2025, machine/vehicle number: SH-250, functionality: fully functional, pressing force: 250 t, stroke length: 450 mm, operating speed: 4 mm/s, reverse speed: 8 mm/s, total length: 3,000 mm, total width: 2,000 mm, total height: 1,700 mm, Equipment: documentation/manual, MODEL: SH-250 STANDARD DESCRIPTION: Our SH series horizontal hydraulic ram press is engineered with a range of three different capacities, from 100 to 250 tons. These horizontal hydraulic presses are specifically designed for straightening and bending profiles, bars, and beams. The horizontal configuration enables easy handling of large-size beams and profiles. The latest-generation HS series offers versatile utility, with the possibility to fit a wide variety of tooling. They operate at a hydraulic pressure below 350 BAR to ensure greater durability of the entire hydraulic system. STRUCTURE AND TABLES The SH series horizontal straightening hydraulic presses feature an electro-welded "C"-frame structure made exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. Design and calculation are carried out using finite element software, thus maintaining our high standards of robustness, accuracy, and quality. They come equipped with a main anti-rotation push cylinder and a rear support table, both made from high-strength steel and machined with DIN 650 T-slots. Standard equipment includes C45E steel support blocks. Two adjustable side rollers are also included as standard, one on each side. CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with honed sleeve, chrome-plated piston, and maintenance-free anti-wear guides. Cylinder is operated by a lever hydraulic distributor. It is fitted with a removable block to prevent piston damage. Single speed motor-driven hydraulic power unit. ELECTRICAL INSTALLATION AND SAFETY Iedpfowk Hkqex Am Eeia Electrical system includes a motor protection switch and emergency stop. Supplied with a glycerine-filled pressure gauge (tonnage readout) and hydraulic oil. Fully complies with all essential CE safety and health regulations. Supplied with an operation manual. OPTIONAL ACCESSORIES • Basic feed rails from 3,000 mm up to 12,000 mm, height adjustable. • Motorized feed rails from 3,000 mm up to 12,000 mm. • Hydraulic elevation and tilting of feed rails. • 415 mm folding device. PROMECAM clamping system. • Additional single-speed manual pump, allowing both manual and powered operation. • Low-voltage electric foot pedal control. • Precision limit switches with cylinder anti-rotation system and low-voltage electric foot pedal control. • Two-speed hydraulic power unit. • Geometry customized to your requirements.

Condition: like new (used), Year of construction: 2011, operating hours: 48,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 45 mm, Engel Victory 750/300 Tech Horizontal injection moulding machine from Engel, model Victory 750/300 Tech, featuring a 300-tonne clamping force and CC300 control system. Manufactured at the end of 2011, with 46,000 hours of automatic operation. Extras (Full Production Cell): Engel Viper 20 robot (2011), safety guarding, and conveyor belt. The injection moulding machine is delivered RE-conditioned by our expert technical team and in excellent working condition. We can also offer your company commissioning service with a functionality guarantee upon installation completion. Technical Details OPENING STROKE: 907 mm YEAR OF MANUFACTURE: 2011 OPERATING HOURS: 48,000 PLATEN DIMENSIONS: 1100x1000 mm INJECTION VOLUME: 318 cm³ SCREW DIAMETER: 45 mm Ijdpfx Aow Hwppsm Ejia INJECTION PRESSURE: 1762 bar (2357 bar increased) CLAMPING FORCE: 3000 kN

Condition: good (used), Year of construction: 2018, 1 used CNC wire EDM machine Make: Sodick Iiodpfxoyknpge Am Eja Model: AQ 750 L, year 2002, overhauled by Sodick in 2018 4000 operating hours since overhaul Control: MARK 30 LN 1 W Wire threading: 97 Pipe AWT