Used Ewd Esterer Gatterstelzen for sale (264)

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. Chedpfszgr Iqsx Al Ajc WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: used, Esterer Linck debarking machine, model ELC ER 72 N 12 SR. Suitable for trunk diameters of 10 to 75 cm. Feed rate up to 70 m/min. 12 infeed and outfeed rollers. Minimum wood length: 1.80 m. Chsdpfjz Dvdzex Al Aec Debarking rotor with 6 knives. Hydraulically pre-tensioned. Main motor: 55 kW. Feed motor: 7.5 kW with 2 speeds. Also ideal as a replacement machine, as many new parts have been installed in recent years.

Condition: used, functionality: fully functional, Well-maintained, inclined cross conveyor from Esterer, originating from a small sawmill. Drive via geared motor. 6 chain strands. Spacing: 2300 mm - 1500 mm - 1200 mm - 1000 mm - 1200 mm. Chodpfjzw Epcjx Al Aoc Conveyor length approx. 3000 mm. Chain pitch 80 mm.

Condition: excellent (used), functionality: fully functional, Low-profile roller conveyor system. Codpjzumy Rsfx Al Ajhc Length 12.20 m. Roller length 1.40 m. Equipped with support rollers and a lifting transfer conveyor with 4 chain strands. Incline conveyor belt for side products, to increase the drop height. Left-hand spiral roller conveyor with a counter roller.

Year of construction: 1995, condition: ready for operation (used), Manual edger DK 90 consisting of: 2 x under-table crosscut saws, line laser, edger, roller conveyor with slat separator, and tilting table. Naturally equipped with all associated control cabinets and hydraulic power unit. Additionally included are numerous templates and a fixed slat head. Inspection is possible upon prior and mandatory appointment. The price is exclusive of 20% VAT, ex works, excluding dismantling, loading, contract preparation, and customs clearance costs. Csdpfx Alsq U R Etj Ajhc

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Chsdpfx Ajz Ehfaol Aoc Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Year of construction: 1999, condition: excellent (used), functionality: fully functional, EWD gang saw line with edger and stacking system Complete cutting line from gang saw infeed to finished stacked lumber. The system includes automatic gang saw infeed, cutting with a high-performance EWD gang saw, material transfer, automatic edger, and a fully automatic stacking and packaging system. Technical specifications Cutting lengths: 2,500–6,000 mm Frame width: 710 mm Clearance height: 700 mm Saw stroke: 600 mm Gang saw speed: up to 320 rpm EWD H38 gang saw infeed EWD high-performance gang saw, type GDZ/GE 600 Chjdpfx Alezvyn Ds Aoc Main drive: 160 kW Hydraulic blade tensioning for up to 25 saw blades Heckel extraction and conveying technology Automatic edger, type FR 9 WD, with two movable sawing units Cross-cutting system as well as centering and feed system with pre-measuring Two fully automatic stacking and packaging systems Output up to 24 boards per minute per stacking system Automatic layer formation, spacer insertion, and package transfer

Condition: used, mileage: 1,001 km, first registration: 01/2000, color: white, driver cabin: other, gearing type: other, Year of construction: 2000, Vehicle location: Bovenden, storage box, 2 compartments Body: Esterer tank body for heating oil & diesel with 2 compartments approx. 13,350L (5,950L/7,400L) Dismantled from DAIMLER-BENZ Actros 1831 4x2 with 3,900mm wheelbase! Next leak and functional test in 03/2027! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! - . Codpfx Alswqn Rle Ajhc

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Chedpfx Aox Tpzdjl Aoc

Condition: used, Year of construction: 1952, Double-edge trimmer / circular saw for edge trimming Codpjzl N Tnofx Al Aohc Manufacturer: Esterer Type: DK600 Year of manufacture: 1952 Maximum feed width: 70 cm 0-line on the left Adjustable saw blade on the right Immediately available Location: Austria, near Ried im Innkreis

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system Chodow Dn S Aepfx Al Aec With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: excellent (used), functionality: fully functional, USM POWERSERT impact wrench with automatic screw feeding Chedsz Iyn Sopfx Al Ajc for fastening hardware General overhaul

Condition: used, Esterer DKV double edger Maximum pass-through height: 160 mm Maximum pass-through width: 800 mm Zero line on the right Left-hand machine (adjustable saw blade on the left) with 2 crosscut saws with roller infeed with lath head with sliver separator with drive motor (45 kW) with control cabinet with saw blades Location: Germany, near Lake Chiemsee Codpoy Da Iiefx Al Aehc

Condition: used, Trimming saw Esterer DKE Passage width: 600 mm Passage height: 160 mm with 22 kW drive motor including spare saw blades including spare templates Csdpfx Asy Da Hfel Aohc Location: Germany, near Chiemsee

Condition: repair required (used), with two-sided cutting width adjustment, as spare parts carrier, frame width 705 mm, stroke 600 mm Cjdpfx Alomqkr Dj Ashc

Condition: used, Esterer round timber intake, 4-strand with feed table with separator with inserter complete with chains and motors Total conveyor length: approx. 6.8 m Chjdpfx Asyxz U Tsl Aec Total width: approx. 7.5 m Already dismantled Location: Austria, near Graz (Internal number: 10br12)

Year of construction: 1993, condition: ready for operation (used), Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Chedpsyw Sv Esfx Al Ajc

Condition: used, This listing is for The Palltronic Flowstar XC Codpfeydqf Dex Al Aehc The unit is in full working condition and is ready for immediate use The Palltronic Flowstar XC is a filter integrity testing instrument used mainly in biopharmaceutical, lab, and industrial filtration environments. It’s part of the Flowstar family of integrity testers designed to assess the performance and integrity of filters by directly measuring flow, which helps ensure that filtration systems are operating correctly and safely

Condition: used, This listing is for the Palltronic Flowstar IV The unit is in full working condition and is ready for immediate use Palltronic Flowstar IV Filter Integrity Testing Instrument (and variants like Pall FFS04 S Palltronic Flowstar IV Filter Integrity Test Instrument / Pall Flowstar IV FFS04 Filter Integrity Tester) are precision filter integrity test instruments designed to check whether sterilising-grade membrane filters and associated assemblies have defects (like leaks or incomplete retention) before they are used in critical processes — particularly in pharmaceutical manufacturing and biotech Typical Uses These instruments are most commonly used in environments where sterility is critical: Final filtration before sterile drug product filling. Leak testing of single-use assemblies and filter housings. Codpfeyfhdmjx Al Aohc Quality control in vaccine production, biologics manufacturing, and related biotech workflows.

Year of construction: 2012, condition: like new (used), EWD roller conveyor with lateral extraction Length: 6500 mm Overall width: 2000 mm Roller covering length: 1200 mm Chjdpfx Aeglugyel Aoc

Condition: used, Year of construction: 1994, Esterer singulator 8-lane (8 conveyor chains) 2-stage singulator Length: approx. 5 meters Width: approx. 1.5 meters Cjdpfx Aeygfkgsl Ashc Height: approx. 1.6 meters Location: Austria, near Wiener Neustadt

Condition: used, Frame saw roller conveyor with 4 discharge arms with support rollers Length: 5.7 meters Total width: 4 meters Total width of discharge arms: 3.35 meters Roller width: 160 cm Roller conveyor width: 185 cm Codpfoyxz U Hsx Al Ajhc Already dismantled Location: Austria, near Graz (Internal number: 10br11)

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Cjdpfx Aleyhduyj Ajhc Location: Austria, near Graz

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width Chedpfx Ajw I Sg Djl Asc • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings • 55 kW saw motor • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: reconditioned (used), functionality: fully functional, 1 branded Esterer electric auxiliary trolley EHK from a small business Track gauge: 790 mm Height top edge of track to top edge of lower creel roller: 390 mm Block support with reversible overrun horn and roller transfer bevel, Liftable chain attachment for prism cutting Chjdporrwzbsfx Al Ajc Lateral movement by separate gear motor Operation from the clamping carriage Swivel rollers renewed and newly mounted Motor with new bearings Rubber buffer renewed