Auxiliary trolley EHK

Esterer EHK

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Dkjdpfexlcufsx Apbsu Technical documentation

Condition: reconditioned (used), Total length 550 mm including 2 hydraulic side pressure registers and 2 adjustment registers for frame posts 70 mm, max. tensioning force per saw blade 6.5 tonnes Dsdor Ezyxepfx Apbsku If required: Magnetic gauges with 3 tubes, 2 magnets and 1 hole for insert sheets are in stock for the following wood dimensions: 18/20/24/25.5/38/40/45/48/50/58/60 and 75 mm, as well as inserts with 12 mm Ø fixing bolts in various widths from 2 to 12 mm

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads Djdpfjpqxnxex Apbeku 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty .

Condition: used, Trimming saw Esterer DKE Passage width: 600 mm Passage height: 160 mm Dodpfx Aey Da Hfepbjku with 22 kW drive motor including spare saw blades including spare templates Location: Germany, near Chiemsee

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Dsdpfxeyam Exs Apboku Location: Austria, near Leoben

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, used automatic edging line Möhringer Autojet Dkjdpfow Tkt Hjx Apbsu S-singulator, infeed roller conveyor, through-feed cross-cutting automatic measuring table with infeed edging saw with double-lamella chip separator driven roller conveyor with pull-off device control system and electrical cabinet

Condition: good (used), CV saw grinder VOLLMER model CNE Dkjdpfx Apsvgdc Dsbeu

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates with fence Dedpfjqpdi Usx Apbeku immediately available Location: Austria, near Klagenfurt

Condition: used, Esterer DKV double edger Maximum pass-through height: 160 mm Maximum pass-through width: 800 mm Zero line on the right Left-hand machine (adjustable saw blade on the left) with 2 crosscut saws Dkjdpfxoy Da Iis Apbju with roller infeed with lath head with sliver separator with drive motor (45 kW) with control cabinet with saw blades Location: Germany, near Lake Chiemsee

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor Dkedpfx Apoyhduyebju - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz