Used Heuft Empty Bottle Inspection Machine for sale (76,903)

Year of construction: 2018, condition: used, A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet. Additional title: single-ended machine for cleaning glass bottles Fodpfx Anszizyzeyegd Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs. Processing time: 14,14 min Heating / Cooling: 1.352.712 kJ/h Water: 7,92 m3/h Formats: 0,5 l NRW bottles Material: housing from stainless steel Position: in a cabinet on legs with an enlarged surface area Base construction: sinle-ended machine Features: pre-soaking and lye baths; spray nozzles; bottle conveyor with drives; pumps; top surface serving as a work platform with guardrails; housing; control cabinet; touchscreen display serving as an HMI panel

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Fgodpfszhw S Rsx Anyjd

Year of construction: 2007, condition: used, A single-ended machine for cleaning glass bottles, with labels removed via a chain. The cleaning solution is steam-heated. Additional title: Single-ended machine Capacity: 17000 bo/h Weight: 26400 kg Fgjdpfszg I Efex Anyjd Machine partitioning: chain division: 110 mm Operation / Control: Simatic S7

Year of construction: 1990, condition: ready for operation (used), A fabric inspection machine is offered. Working width: approx. 2000mm, display: digital length counter, inspection table: integrated backlight, control: conventional via control cabinet, function: winding, unwinding and inspecting fabric webs, control: conventional. Equipped with illuminated transmission screen, digital meter counter, control cabinet with push-button control, guide and winding rollers. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 2800mm/1600mm/1900mm. Inspection possible by arrangement. Fgsdszcfizepfx Anysd

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Fedpfx Ajkucxljnyogd Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Semi-automatic isobaric filling system for carbonated beverages (beer, cider, kombucha). It has a total of 18 stations and processes 6 bottles simultaneously. Production capacity up to 700 bottles/hour (0.5L). Equipped with an integrated vacuum pump for pre-evacuation of oxygen, automatic filling stop, and adjustable speed (1.0–1.7 L/min). Operating pressure up to 3 bar. Professional equipment ideal for craft breweries. Can be sold with a tank, small reservoir, hydraulic pump, and loading unit (sold separately, not included in the price). Fjdpfxozfwcke Anyegd

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 336.067, 3-head glass bottle capping machine Fedpfx Anew R Tvxoysgd

Condition: new, Year of construction: 2005, functionality: fully functional, Machine slides for washing jars and bottles Fgsdpfx Ansvtf R Neyod the machine is new, never used

Condition: used, Year of construction: 2003, Labelling machine Krones Prontomatic Type 12-6/6-4, year of manufacture 1994 - reconditioned. Capacity: 13500 bph Swing-top label Voltage: 400 V Frequency: 50 Hz Length: 2450 mm Width: 2000 mm Height: 2500 mm Fgjdpfx Aexbpggsnysd Formats: Crown cap returnables: 0,33l, 0,5l NRW; crown cap one-way: 0,33l; swing-top: 0,5l, 0,58l Machine partitioning: 180mm Running direction: Right - left Operation / Control: Simatic S7-300

Year of construction: 2016, condition: used, Bottle washer for 7000 bottles/h Additional title: Single-ended machine Nominal output: 7000 Bo/h Cycle time: 22 min. Heat up heat consumption: 1785400 kJ/h Fgsdpow Tam Nefx Anysd Heat consumption operation: 455000 kJ/h Power: 29,5 kW Current: 63 A Voltage: 230 / 400 V Frequency: 50 Hz Water: 3 bar, 2,5 m³/h Compressed air: 6 bar, 40 l/min. Length: 8,81 m Width: 3,46 m Height: 2,8 m Weight: 13000 kg Formats: 0,5 l Euro Operation / Control: PLC control, operating console Material: stainless steel Position: free standing Base construction: Self-supporting housing on adjustable feet Features: PLC control, gearbox, pumps, heat exchanger, label discharge, Layer patterns: 20 bottles/row, 132 rows

Condition: used, Year of construction: 1999, Single-end bottle washer. Factory overhauled in 2005. Additional title: one end machine Nominal capacity: 6700 bo/h Control range: 7370 bo/h Number of bottle cells: 1620 pcs. Fodoxbn Ivopfx Anysgd Number of bottle cells per row: 10 pcs. Length: 7790 mm Width: 3450 mm Height: 2950 mm Weight: 20000 kg Machine partitioning: Chain division 150 mm, cell division 110 mm Operation / Control: Siemens S 5 Material: Stainless steel Position: Free-standing on spherical feet Base construction: Housing in one-piece block design Features: Bottle insertion and removal finger system, chemical dosing stations with dosing pumps, format parts for inlet and outlet

Condition: used, Year of construction: 2009, Inspection system for neck, body and back labels as well as fill level and crown caps Manufacturer: Miho Model: Newton- EC 2001 Year of manufacture: 2009 Additional title: label control for bottles Capacity: 30000 Bottles/h Power: 50 W Current: 0,2 A Voltage: 230 V Frequency: 50/60 Hz Length: 3100 mm Fgsdpfx Anew Tazaeyed Width: 1600 mm Height: 1500 mm Formats: 0.5L NRW, 0.33L Vichy, 0.33L Euro, 0.35L Lemonade Running direction: right -> left Position: free standing Base construction: Electronics cabinet on tubular feet with spherical caps Features: Electronics cabinet, measuring devices, fault container rejection

Year of construction: 1993, condition: used, Bottle washing machine Nagema GM Arcade Year of construction 1993 Output 23,000 bph Additional title: Single-ended machine Fgedjvcqgzepfx Anysd Capacity: 21000 bo/h Bottles each row: 16 bo/row Length: 8,64 m Width: 4,47 m Height: 1,92 m Weight: 17900 kg Formats: 0,5 l NRW-Bottle Features: Heated by steam; smoke suction; insertion sieves; caustic settling tank Periphery: S5 controll (HMI Lauer)

Year of construction: 2001, condition: used, New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Depalletiser with lifting frame Capacity: 140 layer/h Power: 8,75 kW Voltage: 230/400 Volt Frequency: 50 Hz Compressed air: 5,0 bar; 8,0 Nm³/h Length: 4020 mm Width: 3400 mm Height: 5425 mm Weight: 3800 kg Formats: europalett (1200 x 800 x 140 mm) Operation / Control: control box / Siemens S7 Material: Painted mild steel Position: free standing Base construction: Square tube frame Features: Pallet infeed, -outfeed, -magazine; base frame with lift truck, shaft walls, layer pad gripper, clearing table, linear unit, push flap, centring, push-off plate, cardboard lifter, magazine, slip lid magazine, stairs/platforms, protective grille, control system Periphery: Bottle conveyor belts approx. 20 m, pneumatic transport approx. 50 m Fgsdpfxex T Ai Io Anysd

Condition: ready for operation (used), Suitable for: - Food: fluid and viscous products such as sauces, tomato sauces, pâtés, mayonnaise, ketchup, dressing Fgsdpfx Ansyxpqcoysd - Chemicals: pesticides, detergents, fertilizers, herbicides, paints, varnishes - Cosmetics: shampoos, creams, shower gels, oils, lotions Piston filler with 4 volumetric filling heads, with upward dispensing Manual cap placement by operator Automatic capping unit Incl. 80-liter heated tank with mixer Up to 2,000 bottles per hour

Year of construction: 2026, condition: new, functionality: fully functional, Flexor 440IS with EyeC ProofRunner Web 450 print image inspection system and REA-JET HR 4K printing system. Fgodswkt D Dspfx Anyed The Flexor 440IS is the ideal fully integrated 100% inspection solution. The 440IS machine allows the operator to inspect a web width of up to 440 mm and remove defects. The machine offers flexibility and high performance demanded by customers with the highest quality standards. High-speed inspection, low maintenance costs, and full integration of the 100% inspection camera provide converters with a package that exceeds all expectations. The offer price is exclusive of camera and inkjet unit. These can be selected according to customer requirements and preferences. Have we sparked your interest? We would be happy to assist you!

Condition: ready for operation (used), Diameter range: 50 mm - 135 mm Height range: 80 mm - 340 mm Heads: 10 Production capacity: 2,500 - 6,500 cans per hour Label length: 40 mm - 130 mm Fgjdpeyv Addjfx Anyod Two labelling stations (front and back labelling) Includes several tooling sets for different bottle types

Condition: used, Year of construction: 2010, Manufacturer : Serac Model : DMX R6V3/720 Year : 2010 Type: Monoblock filling and screwing   Current application: 250 mL bottle/vial - Ø38 mm screw cap Output: 3,300 bottles/hour Dosing: by weight Suction conveyor feed system ensuring bottle stability Heraeus UV tunnel: decontamination Feeding of caps via hopper and bucket conveyor and distributor Decontamination of bottle caps using Claranor pulsed light   Filling: 100L capacity hopper 6 nozzles on scales connected to the ejection of bottles at the machine outlet   Screwing: Tightening of caps using pneumatic jaws Fgjdpfx Anjyr Sxnoyod Adjustable clamping pressure

Condition: used, functionality: fully functional, SCH-BT/300S Bottle Washing, Filling and Capping Machine Fsdezb Rmvopfx Anyegd The SCH-BT/300S is a fully automated machine designed for washing, disinfecting, rinsing, filling, and capping 18.9-liter (5-gallon) water bottles. The system integrates a multi-stage cleaning process with automated bottle handling, filling, and cap application, ensuring high hygiene standards and reliable operation for bottled water production. Technical Specifications * Capacity: 200–300 bottles/hour (depending on washing cycle settings) * Washing Time: Adjustable from 40 to 120 seconds * Bottle Size: Standard 18.9 L (5-gallon) bottles * Power Supply: 400 V, 50 Hz * Installed Power: 9 kW * Compressed Air Requirement: 800 L/h, 6 bar, oil-free * Water Supply Requirement: 5,000 L/h, 1" connection, 2–4 bar pressure * Weight: Approx. 800–1000 kg * Minimum Installation Area: 7 m × 3 m The machine is suitable for small and medium-sized bottled water production facilities requiring efficient and hygienic bottle processing.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 100281518, total height: 2,260 mm, total width: 1,550 mm, total length: 1,685 mm, product height (max.): 310 mm, product width (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! The original price was over 100,000 EUR! The device is ready for loading & packed for transport! Loading can be handled by the seller. TECHNICAL DETAILS Maximum inspection width: 150 mm Maximum inspection height: 310 mm CONVEYOR SYSTEM Conveyor type: Turn table Speed: 12 – 45 m/min MACHINE DETAILS X-ray Generator Voltage: 30 – 75 kV Current: 1 – 8 mA Power: max. 300 W Dimensions (L x W x H): 1,685 x 1,550 x 2,260 mm Protection class: IP65 / IP66 Electrical data Fsdpey Ath Hsfx Anyegd Power supply: 200 – 240 V Frequency: 50 / 60 Hz EQUIPMENT Rotary table conveyor Hermetic air cooling X-ray inspection system

Condition: good (used), With top press-on rollers for levelling out staples Can be combined with a pallet brushing unit Infinitely adjustable test pressure Standard tests: Bottom boards and bottom crossboards, Lengthwise and crosswise mounted top boards Indirect wedge inspection Fodpfx Aed R Eqpenyegd Optional tests: Dimension check, fork arm or area-clear monitoring, separate bottom board inspection of loaded pallet, direct wedge inspection If you need more information, please don't hesitate to contact us on the contact form or call us.

Condition: good (used), Year of construction: 2006, Stork FIM NT12+ HD Final Inspection Machine Poultry Manufacturer: Stork Fgsdpfev Hx Nfsx Anyjd Model: FIM NT12+ HD Year: 2006 Number of units: 12 Capacity: 8000-9000 BPH Machine Dimensions LxWxH: 1.365x1.205x2.750 mm Machine Weight: 750 kg.

Condition: used, Year of construction: 1990, Bottle washing machine MAG Sirio 8 3,000–11,000 bottles/h Fodpfx Anjx N I Egjyegd Bottle size: 0.2 l – 1.0 l Year of manufacture: 1990 Fully operational, runs until March 2026.

Condition: used, Year of construction: 2021, Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless steel, chassis and supports in mild steel, painted Positronic control system for optimum adaptation to downstream filler Fgjdsmk I Dwepfx Anyod

Condition: used, Dinnissen Dima 1200 bag emptying machine bag cutting machine stainless steel Machine has been overhauled. Equipped with new running wheels, bearings, clamps, etc. Capacity: 1200 bags/hour Completely made of stainless steel Drum motor power: 2x 1.5kW 124rpm Cutting rotor motor power: 2x 5.5kW 211rpm Fodpfxjx D U Nle Anyjgd Cutting chamber with double rotor is mounted on top of the infeed hopper of the drum sieve See our other advertisements VMA Wekerom