Used block heat and power plant for sale (18)

Condition: used, Year of construction: 2011, operating hours: 32,500 h, functionality: fully functional, power: 140 kW (190.35 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, overall weight: 3,500 kg, temperature: 25 °C, We are offering this used MAN E2876 combined heat and power unit, year of manufacture 2011. Year: 2011 Model: E2876 E312 Engine number: 298 3025 272 3007 Serial number: 3007 Cjdpfjylmbqox Aa Nogp Factory number: 5019615 Job number: Power output: 150 kW Speed: 1,500 rpm Temperature: 25 °C Installation altitude: 100 m If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Cgodexc Ni Rspfx Aa Nop

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Cgjdpfx Aotwqzrsa Njp

Condition: excellent (used), Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, Bosch CHP Complete System (1 Set) – CHP CE 140 N (Year 2016) including Cabero Heat Exchanger/Dry Cooler (Year 2017) Cjdpfx Aaeycl Abj Negp For sale is 1 complete, homogenous CHP unit consisting of 1× Bosch CHP Module CE 140 N (gas-powered CHP) including the corresponding peripherals as well as 1× Cabero heat exchanger/dry cooler. The unit is operational and in very good condition. Sale only as a complete package. 1) CHP / CHP Module Manufacturer: Bosch KWK Systeme GmbH Model: CHP CE 140 N Year of manufacture: 2016 Engine: MAN 2867 E 218 (gas-powered Otto engine) Performance data (CE 140 NA / typical as per datasheet series): Electrical output (nominal, 90/70°C): 70 – 140 kWel Thermal output (nominal, 90/70°C): 106 – 212 kWth Gas input: 192 – 384 kW Modulation range: 50 – 100 % Net efficiency: electrical 36.5 %, thermal 55.2 %, total 91.7 % Power supply: 400 V / 50 Hz, 3-phase Own energy consumption (electrical): 2,500 W Max. operating pressure (heating circuit): 6 bar Acoustics / emissions (CE series): Module noise level: 71 dB(A) NOx (dry, 5% O₂): ≤ 0.250 g/Nm³ CO (dry, 5% O₂): ≤ 0.300 g/Nm³ Dimensions (CE 140 NA – indicative values): Width W ≈ 1,160 mm Length L ≈ 3,850 mm Required room height min. ≈ 2,900 mm Wall clearance A > 900 mm 2) Cabero Heat Exchanger / Dry Cooler (1 unit) Manufacturer: Cabero Designation / Item No.: GCDD099MB-2X7-64-S D (EB) EC AXI A Version / Standard: PED / DIN EN 14276-2:2011 Year of manufacture: 2017 Heating surface: 2,742.65 m² Medium: Ethylene glycol 34% / Water 66% Fluid Group: 2 Max. allowable pressure (PS): 12 bar Test pressure (PT): 17.16 bar Permitted temperature range (TS): −40 / +60 °C Volume: 439.5 L Pressure test date: 03./04.07.2017

Condition: ready for operation (used), System includes (1) Two-Cylinder Motor HERFORD 2H 280, power: 150PS, rotational speed: 400/min, electric/ heating power: 83/ 140kWh, with Generator MARELLI MJB 250 LE4 (2) Three-Cylinder Motor HERFORD 3H 280, power: 225PS, rotational speed: 400/min, electric/ heating power: 125/ 212kWh, with Generator MARELLI MJB 250 MA4. Cgjdpsgg Stfjfx Aa Nep

Condition: excellent (used), Year of construction: 2014, operating hours: 31,347 h, functionality: fully functional, power: 800 kW (1,087.70 HP), Equipment: documentation/manual, MWM CHP plant for decentralized electricity and heat generation in electrically controlled, grid-connected operation Cjdpfoxfgxbox Aa Nsgp Controllability 50-100% Technical specifications: Electrical output in kW (electrical): 800 Efficiency: Electrical: 42.3% Thermal: 45.5% Total: 87.3% Emission values: NOx 500 mg/Nm³

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Codpfx Aaswd Nw To Nsgp Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each Cedju Nxatjpfx Aa Nogp - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, intermediate storage tank + fuel depot tanks 4,8 m³ *

Condition: like new (used), Year of construction: 2017, operating hours: 10,000 h, A Spanner RE2 Facelift wood gasifier in good condition is for sale. The unit can be inspected in Brixen / South Tyrol. Cgjdpfx Asxuqpvsa Nep

Condition: good (used), Year of construction: 2014, operating hours: 42,000 h, functionality: fully functional, 1 combined heat and power unit for natural gas (convertible to other gas types) Output: 800 KW electrical 800 KW thermal Manufacturer: G2 Engine: MWM, type TCG2016 V16C Operating hours: 42 000 Cgjdpfovgbdrsx Aa Njp Year of construction: 2014 Complete system in container (12 x 4.5 m) with all heat exchangers, switch cabinets, power supply All maintenance intervals carried out by the manufacturer. Ready for immediate use! Further details on request

Condition: good (used), functionality: fully functional, The machine consists of: 1. Loading conveyor belt for the sheet to be joined - Dimensions: 3200 x 2000 - Power: 2 kW 2. Lifting table - Dimensions: 3200 x 2000 - Capacity: 5000 kg - Power: 4 kW 3. Conveyor belt for loading empty pallets - Dimensions: 3200 x 2000 - Power: 2 kW 4. Empty loader for the sheet to be optimized VTSA 3800 - Length: 3200 - Feeding speed: 55 m/min - Power: 5 kW 5. Roller feeder VTSM 3800 - Length: 3200 - Power: 1.5 kW 6. Angle transmission with rollers and belts KS4 - 5400 - Length: 3200 - Width: 2000 - Power: 2+2 kW 7. Conveyor belt for aligning sheets on the side edge PKP - Length: 3000 - Power: 4 kW 8. Conveyor belt with chains for pinching the sheet - Length: 2000 - Power: 5.5 kW 9. Camera for reading the material to be optimized OK P - Analyzes the sheet and sends the cutting commands (head cut, tail cut, hole cut, etc., according to the parameters set by the operator) - Sheet thickness control unit 10. Pasta cutting unit - Hydraulic control 11. Group for selecting waste material (it is inserted in a belt below) 12. Splicing group with thermo-fuse wire - Number of splicing wires: 6 13. Cutter for cutting the joined sheets to size - Hydraulic control 14. Stacker for unloading the joined sheets - Length: 3200 - Width: 2000 Cgedpfovnri Iox Aa Nsp - Power: 3 kW 15. Lift table - Length: 3200 - Width: 2000 - Load: 5000 kg - Power: 4 kW 16. Conveyor belt for unloading pallets - Length: 3200 - Width: 2000 - Power: 2 kW 17. Conveyor belt for loading empty pallets - Length: 3200 - Width: 2000 - Power: 2 kW 18. Evacuation belt for cutting waste - Power: 4 kW 19. Mechanical cutter for shredding waste

Condition: used, Year of construction: 2008, For sale, we offer an MTU combined heat and power (CHP) plant with 1.2 MW electrical output. Technical details: Manufacturer: MTU Engine: MTU 12V4000L62 Generator: Stamford Year of manufacture: 2008 (completely overhauled in 2015) Operating hours: 63,000 Including control cabinets Including dry cooler Cgjdpfx Ajxcwlaoa Nsp

Condition: used, Year of construction: 2015, operating hours: 82,000 h, functionality: fully functional, type of input current: AC, power: 220 kW (299.12 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, empty load weight: 12,500 kg, For sale: Biogas CHP unit (BHKW) Fully functional CHP unit in container (dimensions: LxWxH = 7x3x3 meters, excluding the rooftop fan, weight: 12.5 tons) The unit will be decommissioned once the two new CHP units are operational, approximately summer 2026. The CHP was operated under a service contract with IWK. The last major overhaul (turbo, pistons, liners, heads, catalyst) was carried out in May 2025 at 77,500 operating hours. Service is performed every 2,000 hours. The unit can be inspected on site and in operation. The CHP is sold as-is, without warranty, ex location. Transport costs to be borne by the buyer. Cgodpfx Aasx A A Sfj Nep

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Cgedpfxeydqlqj Aa Nop Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours

Condition: excellent (used), Year of construction: 2020, operating hours: 5,065 h, functionality: fully functional, power: 901 kW (1,225.02 HP), total height: 2,990 mm, total length: 12,000 mm, total width: 2,990 mm, fuel: domestic gas H, Equipment: documentation/manual, For sale is a natural gas combined heat and power (CHP) plant in containerized design and a chimney with 3 flues: Short description: CONTAINER CHP 901 kWe / 928 kWth Natural gas engine: Jenbacher J 412 GS-B06 Generator: 400V / 50 Hz / STAMFORD PE 734C Further information: - Complete CHP package in a container (12x3x3 m), super silent, color RAL7004, including mixture cooling and emergency cooling as a table cooler, outdoor glycol protection system, oxidation catalyst (Oxikat), provision for SCR system, island operation capability, Profibus DP interface, etc. - Supplied as per technical drawings, documents, P&ID diagrams, and data sheets. Codsvuz Utspfx Aa Nogp - Genset has completed 5,056 operating hours (operating period: 01/2021 - 12/2021). - The entire CHP plant is in excellent condition, the genset was regularly serviced under a premium service contract, and is currently under the manufacturer’s care.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, input voltage: 400 V, rotational speed (min.): 1,500 rpm, warranty duration: 12 months, nominal power: 1,000 kW (1,359.62 HP), input frequency: 50 Hz, continuous power: 1,000 kW (1,359.62 HP), Gas generator or cogeneration 1000kW. 40ft container including cooling system. Engine MWM TCG 3016V16S, Generator LSA, MCB - ABB or Schneider, gas line Dungs, control system ComAp or Deiff. Delivery 30-90 days. Cedpfsvta A Hjx Aa Nogp

Condition: used, Year of construction: 2014, functionality: fully functional, power: 55 kW (74.78 HP), rotational speed (max.): 1,500 rpm, For sale: engine for cogeneration with generator. Cedpfjxuvamjx Aa Nsgp

Condition: like new (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, power: 45 kW (61.18 HP), input voltage: 400 V, For sale Spanner Biomass cogenerator station with 9 units. Model - BHKW45-8,0-V1.1 Year - 2015-2017 Cgodpfx Aevcbtroa Nsp Nominal power - 6x45KW, 3X50KW Voltage - 400V Frequency - 50HZ Current - 3 phase Engine - 8.0L Price shown per unit. 1 unit includes: Biomass gasifier, generator that converts the gas with engine to electricity, separate control cabinets for gasifier and generator. Price is discussable. Please see attached documents. Preferred text communication via e-mail or whatsapp.