Used Hidralmac 40 T Spottingpress Ph4C for sale (80,895)

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Dsdpfxeup T Uqj Aixeuu Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2022, condition: excellent (used), Dycometal Type: CCK -40/1500T Climate chamber water-cooled Volume liters 1500 Internal dimensions height 1000 mm width 1000 mmm depth 1500 mm External dimensions Height 2200 mm Width 1293 mmm Depth 3400 mm Thermal test Minimum temperature -40°C Maximum temperature +150°C Thermal gradient cooling 2.0 K/min. Thermal gradient during heating 3.5 K/min. Temperature stability ±0.1°C to ±0.3°C Temperature uniformity ±0.5°C to 1.5°C Climate test Temperature range +10°C to +90°C Dujdju N Uugspfx Aixsu Humidity range 10% to 98% %RH Dew point range +6.5°C to +86°C Humidity stability ±1%RH to ±3%RH Water-cooled condenser Nominal voltage 400 V 3N~PE 50 Hz Output 16.1 kW 27.5 A Refrigerant R-452A Weight: 1120 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2026, operating hours: 3 h, available immediately: Kaeser ASK 40 T - 11 bar screw compressor with integrated cold dryer Dedpfx Aisyw Nurjxouu with Controller SIGMA CONTROL 3 Year 2026 Operating hour: 3 h Pressure: 11 bar Nominal power: 22 kW Delivery rate: 3.50 m³ / min Sound level: 69 dB (A) Compressed air outlet: 1 1/4" Dimensions length x width x height: 800 x 1460 x 1530 mm Weight: 620 kg Visit our store. We always have a large selection of new and used compressors in stock!

Year of construction: 2023, condition: new, pressure 40 t throat 195 mm stroke 8-78 mm no. of strokes 76-190 Hub/min ram - range of adjustment 60 mm table surface area 650x380 mm Dsdpfxep Udupj Aixsuu table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 2,2 t dimensions of the machine ca. BxTxH 1450x1220x2110 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, This is a hydraulic tube forming press manufactured by EMS (now Numalliance). Designed for horizontal forming of tube bodies with a pressing force of 40 t. For simple and ergonomic tool changes, a crane is integrated into the machine (see photos). The forming press is fully functional and can be inspected on site. Dedpfx Aioygv Tlexjuu

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 20960 € 402.43 € 40 to 250 mm 200 x 20 mm 1100 x 620 mm 55 mm 4,7 - 9,1 mm/s 45 mm/s 45 l 3 kW 950 mm 1250 mm 900 mm 1000 mm 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Duedexh Rulspfx Aixju Version with CNC control

Condition: good (used), Year of construction: 2018, Voltage in Volt: 400 Frequency in Hz: 50 IP protection class: 55 Protection class: I Power consumption in kilowatts: 4 Air volume without hose in m³/h - l/min: 489 - 8150 Maximum negative pressure in kPa-mbar: 30 - 300 Noise level in dB(A): 72 Tank volume in liters: 100 Main filter type: Polyester Star Filter Main filter area in cm²: 19500 HEPA H14 in cm²: - Inlet in mm: 70 Dimensions L x W x H in mm: 1130x600x1530 Weight in kg: 139 Optional Longopac system: - 5-pole three-phase plug: Included Plug with phase inverter: Included Filter shaker (manual): Included Accessory container: Included Removable container: Included Chassis with brakes: Included Motor protection switch: Included Pressure gauge: Included Three-phase side channel blower: Included Hose and cable holder: Included Dsdpfx Ajr E Uwusixjuu Cyclone plate: Included Vacuum relief valve: Included

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: Dsdexrtluepfx Aixsuu All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x pallet rack beam, used Material color: yellow Djdpfxsynlraj Aixouu Box profile: 60 x 40 mm Beam type: TRV1-270-064-30 CE Clear span: 2,700 mm Bracket: 5 HK (hooks) 02x safety pins, used Design: fully galvanized For securing the cross beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is desired, additional costs will apply. These can be requested from us separately depending on the delivery location and scope of delivery.

Condition: good (used), Scope of delivery includes: 01x CS profile, used Material color: Sendzimir galvanized Total length: 5,550 mm Profile dimensions: CS 250 x 50 x 40 mm Weight per piece: approx. 45.00 kg Dsdpfox R Ambsx Aixsuu Material thickness: approx. 2.5 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Should you require transport or shipping, additional costs will apply. These can be quoted separately depending on the delivery location and scope of supply.

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Scope of delivery includes: 01x Locking bracket, used Material color: Sendzimir galvanized Leg "A": approx. 35 mm Leg "B": approx. 53 mm (support surface, see description) Incl. spacer block (grey) Internal dimension "C": approx. 22 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 0.120 kg Note: Thanks to the included spacer block, the Z-bracket can be used for various beam widths from 40 to 60 mm! Dusdpfjpgndgsx Aixsu Quick overview / Application area: - Without block for beam width 60 mm (e.g., for INP) - With block (small side inside) for beam width: 50 mm (INP or box profile) - With block (large side inside) for beam width: 40 mm (INP or box profile) General information about the item: This item is available for pickup only. Additional shipping or transport services are subject to extra charges, which can be provided upon request depending on the delivery location and quantity.

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x pallet racking beam, used Dedpfx Aetp Tb Toixjuu Material color: yellow Box profile: 115 x 40 mm Agraffe: 4 hooks Clear width: 1,100 mm 02x locking pins, used Version: completely galvanized For securing the side rails against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you a used pallet rack beam Nedcon manufacturer for sale to. Technical specifications of the pallet shelf traverse: Shelf system: Nedcon Type: NS Currently available: approx. 5,000 pieces included are included: 01 x pallet shelf beams, used Material color: RAL 2008 bright red orange Box profile: 90 x 40 mm Cage type: 4 hooks Clearance: 1,900 mm maximum load per pair of traverse 2,000 kg, at gleichm. distributed load 02 x locking pins, used Execution: compl. zinc-plated To secure the beam against unintentional lifting Our services at a glance: Djdpfod A Sm Tox Aixsuu (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: new, Year of construction: 2019, pressing force: 275 t, pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm Djdjfxyigspfx Aixjuu :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: as good as new (ex-display), Year of construction: 2015, pressing force: 63 t, pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm Dodoffamqjpfx Aixouu daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

Condition: used, Year of construction: 2015, machine/vehicle number: 4273, pressing force: 110 t, pressure:110 t table length:1200 mm table width:1000 mm stroke max.:1150 mm dimensions:4200 x 2400 x 4800 mm draw back pressure:11 t stroke max.:1150 mm weight:16 t stroke of the table:1200 mm swivable table::45 Grad table load:12 t table speed:25 mm/sec table speed:10 mm/sec power capacity:23 kW voltage:400 V control voltage:24 V DC frequency:50 Hz work speed:0 - 10 mm/sec. :130 mm/sec :195 mm/sec. Colour:Grau 7035 RAL Dusdpod Ap Ugsfx Aixou Colour:Orange 2009 RAL Colour:Dunkelgrau 7021 RAL Oil tank capacity:400 l Recommended oil:DIN HLP / ISO VG 46

Condition: as good as new (ex-display), Year of construction: 2015, machine/vehicle number: 4293, pressing force: 40 t, pressure:40 t table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working speed:0 - 10 / 10 - 155 mm/sec dimensions:4300 x 2700 x 4500 mm Duodpfjdxrqxox Aixju total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. Dedpfx Aiefxygwjxeuu The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch Dusdefxyiropfx Aixju :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: new, pressing force: 400 t, pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm Duodpfjfhcc Rjx Aixsu distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec :0-25 mm/sec.

Condition: as good as new (ex-display), Year of construction: 2025, pressing force: 15 t, Hidralmac single-column press – 15 t – assembly press – manual combination press A compact hydraulic single-column combination press from the manufacturer Hidralmac with a pressing force of 15 t is for sale. The machine is designed as a manual special-purpose solution and is particularly suitable for flexible assembly, straightening and pressing work in workshops and service environments. The worktop can be swivelled out to the left. The lower base plate can be inserted at 3 different heights. The press ram can be lowered manually via the rotary handle. Special features of this press: The operator can build up pressure very precisely from 0 to 1.5 t. This is very important, for example, when pressing in ball bearings. We have sold this type of press on numerous occasions to the aerospace industry. In this sector, precise and careful work is essential. Once the press has been precisely positioned, pressure of up to 15 tonnes can be built up using the hand pump. ##### Technical data + information: Assembly and disassembly press – 15 T – 270 × 600 mm ==== General specifications - Type: C-frame / manual hydraulic press - Manufacturer: DURENDUS - Pressing force: 0–15 T - Table size: 270 × 600 mm - Installation height: 650 / 800 mm - Table height from floor: 750 mm - Hole in table: Ø 60 mm - Distance from lower recess to table: 450 mm - Overall dimensions (WxDxH): 900 × 850 × 2,300 mm - Total weight: approx. 800 kg - Frame: welded steel frame - Table: swivelling - Under-table: height-adjustable (3 positions) ==== Hydraulic cylinder - Piston stroke: 150 mm - Piston rod diameter: Ø 80 mm - Cylinder diameter: Ø 100 mm - Max. working pressure: 250 bar ==== Hydraulics & Drive Dusdpfx Aiefhcc Isxsu - Drive: manual via hand lever and hand pump - Fine adjustment: 0–1.5 t via rotary knob - Hand pump: 0.5 l - Pressure gauge: manometer ==== Control - Operation: manual via hand lever and rotary knob - Pressure control: mechanically adjustable with fine sensitivity ==== Safety - Anti-rotation device - Sturdy frame construction ##### Applications: Pressing in, pressing out, assembly, disassembly, straightening work, bearing technology, workshop work, maintenance, precision assembly, service operations, small-batch production Hydraulic press, hydraulic press, assembly press, disassembly press, workshop press, 15-tonne press, 15-tonne press, manual hydraulic press, C-frame press, single-column press, C-press, hand press, press-fitting press, bearing press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a bespoke quote. Our hydraulic presses are manufactured in accordance with German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the Brazilian national safety directive NR 12, which is based on these standards. Our key strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. The hydraulic systems of our presses are predominantly fitted with components from leading European manufacturers.

Condition: used, Year of construction: 2021, machine/vehicle number: A2536805, pressing force: 40 t, pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. Dusdpfsfxyhfjx Aixsu :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

Year of construction: 2020, condition: reconditioned (used), pressing force: 400 t, machine/vehicle number: DF0317, pressure:400 t passage width:600 mm Djdpfx Aed E Irhoixjuu stroke:400 mm Weight of machine approx.:14 t dimensions:2380 x 1680 x 3580 mm Engine Output:36 kW Max Working height:750 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec column diameter:230 mm Return Capacity:40 t speed rapid traverse:25 mm/sec Travel:500 mm Oil Tank Capacity:600 l Oil Cooling:1,5 kW :6 m Monitor:WEG 12 Zoll :6800 ? :4200 ? Speed increase to 80 mm/sec.:19000 ? every additional meter conveyor belt:850 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Year of construction: 2020, condition: like new (used), pressing force: 150 t, pressure:150 t stroke:500 mm Weight of machine approx.:ca. 8,5 t Dodpfodxvfijx Aixsuu dimensions:1200x1800x3100 mm Engine Output:10 kW Max Working height:1000 mm Approaching Speed max. :9,9 mm/sec Pressure Speed:100t = 9,9 bis 0 mm/sec Table height above ground level (approx.):1000 mm :Schmiernippel column diameter:230 verchromt mm Return Speed:25 mm/sec :500 l demand for oil:ca 400 l Maintenance Balcony:5800 ? :3900 ? :2800 ? :4800 ? :29000 ? :8200 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Condition: new, Year of construction: 2017, pressing force: 150 t, machine/vehicle number: DF0149, pressure:2x 75 / 150 t passage width:2050 x 965 mm stroke:800 mm total power requirement:Hauptmotor 22 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:1500 x 1025 m Dodpfjd Aftpsx Aixouu :150 mm :150 mm :72 mm :2 kW :870 x 350 x 150 mm :1500 x 600 x 150 mm :1500 x 1025 x 75 mm :1500 x 1025 x 150 mm :120 mm :80 mm :350 l demand for oil:320 l :350 mm max. open height:1600 mm :15-0 mm/sec :100 mm/sec :2050 x 965 mm :6 mm :0,5 mm