Industrial trailer PA65-2 – 40 t payload

Multi-Trans PA65-2

Condition: like new (used), total length: 10,000 mm, total width: 3,000 mm, total height: 1,105 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved surfaces for internal plant transport. Tandem operation: The trailer components are not designed (without a coupling device) for tandem operation with multiple trailers. Payload: 60 t at 6 km/h with evenly distributed load (surface load) across the load area between the axles. Point or line loads are only permitted upon prior notification. Main frame: Robust welded construction made from profile steel. Loading area: Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, loading surface covered with softwood planks, all-round recessed edge protection. Steering: All-wheel steering on 4 oscillating axles; drawbar can be raised, removed, or repositioned from front to rear; coupling height at the towing vehicle approx. 650 mm (other coupling heights only permitted upon prior notification); towing eye according to DIN 74054, 40 mm diameter; track rods with adjustable ball joint heads; diagonal or tie rods adjustable and mounted with low-maintenance pivot bearings; drawbar drop protection according to accident prevention regulations (UVV). Chassis: 4 steered oscillating axles, 2 steered axle lines for even load distribution on all wheels; wheels with solid rubber elastic tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and permanent grease lubrication. Pgsdpfx Ahjxrr Uhs Asu Paintwork: Top coat RAL 5002 ultramarine blue Rental or sale EU-wide.

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Podouf Rw Topfx Ah Ajgu Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.