Used Ionization for sale (44)

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Employs a different APCI probe. The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Fgjdpfxsxhfc Ro Ahvef Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: used, This listing is for the This listing is for the Bruker microflex mass spectrometer The unit is in full working condition and is ready for immediate use Fgedpfx Ahsxhdxqevof The Bruker Microflex is a Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometer (MALDI-TOF MS), primarily used for rapid identification of microorganisms, biomolecules (like proteins and peptides), and polymers. It is part of Bruker’s MALDI Biotyper series Key Components: Laser Source: Nitrogen or solid-state laser (commonly 337 nm UV) Ion Source: Vacuum chamber with MALDI target plate Flight Tube: Measures time-of-flight of ions Detector: Converts ion arrival times into a mass spectrum MALDI Target Plate: Metal plate for spotting samples mixed with matrix How It Works (Simplified): Sample Prep: Mix analyte with a MALDI matrix (e.g., α-cyano-4-hydroxycinnamic acid). Laser Ionization: Laser hits the matrix, causing it to ionize the sample. Ion Acceleration: Ions accelerated into TOF analyzer. Detection: Time-of-flight is measured; smaller ions reach the detector faster. Spectrum: Mass/charge ratio (m/z) plotted vs intensity. Physical Specs (Approximate): Footprint: Desktop size (about 80 cm width) Weight: ~100–120 kg (varies by model/version) Power: Standard lab electrical supply Environment: Requires clean, stable temp/humidity condition

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, overall weight: 3,500 kg, number of axes: 5, This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine. Additional equipment • Cooling/Temperature Control: Cooling system with temperature regulation • Generator: Transistor pulse generator • Output Current: 50 A • Generator Size: 600 x 650 x 1765 mm • Generator Size: 600 x 650 x 1765 mm Machine Benefits Technical Machine Benefits • Maximum machining angles / height: 15° / 260 mm • Maximum workpiece size: 1050 x 820 x 305 mm • U-shaped table dimensions (w x d): 840 x 560 mm • M8 mounting holes: 52 • Wire diameter: 0. 1 – 0. 3 mm • Wire coil weight: 10 kg • Automatic wire threading and wire cutting: included • Tank capacity: 860 liters • Filter rating: 3 µm • Filter system: dual system // filter system weight: 350 kg Extra Information Controller Inputs: Keyboard, USB, Memory Stick, Ethernet Display: 15" TFT Touchscreen Positioning Accuracy: 0.1 µm Minimum Incremental Movement: 0.05 µm Maximum Programmable Size: ± 99999 mm Software: ADVANCE Plus with 3D CAD/CAM, 10 GB Memory, and Clear/Intuitive Layout Remote Communication Ready: mcAnywhere Graphical Views: 3D, Front, Side, Top Machine Benefits ODS Optical Drive System Tubular Direct Drives on X, Y Axes Linear Scales on X, Y Axes Intelligent Automatic Wire Threading System Dry and Underwater Operation Capable Wire Straightening System Automatic Hole Detection 3D CAD/CAM Control System 5 Controlled Axes + Prepared for Additional Axes Precise Finish Circuit (PFC) Machining Long Life System (LLS) Design U-Shaped Hardened Segmented Clamping Table Compressed Dielectric (Water) Cooling System Remote Communication Ready (mcAnywhere) CE Version 30°/45° Wire Cutting Capability Fgsdpfx Aex D Rqfjhvjf E.KO Ionizer 1501 Dimensions Machine Depth 2687 mm

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system Fgedpfjxt Dk Rsx Ahvef - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 110SIS, compressed air connection: 6 bar, working width: 1,100 mm, warranty duration: 12 months, operating speed: 1,000 mm/s, Komfi Laminator Sirius 110 with HotKnife, Rotary Knife and Automatic Stacker New, Manufactured 2025 Ideal for commercial printing and packaging industry! Max. production speed: 60 m/min (5091 B1 sheets landscape/h); 50 m/min with hot knife (4243 B1 sheets landscape/h) Max sheet size: 1100 x 1100 mm Paper weight: 115-600 g/m² Dimensions (incl. automatic stacker): 7.08 x 2.71 m Min. sheet dimensions: 300 x 297 mm Max. paper pile: 1350 mm including pallet Thickness of laminating film: 24-50 μm Kind of laminating film: OPP, PET, Nylon Time of laminating roll warm up: 5 min Sheet overlap accuracy: 1.5 mm Consumption of compressed air: max 80 l/min Max. pressing force: 43 kN Max. linear nip pressure: 39 N/mm Double capacity for sheets in the high-pile feeder and for laminating film = reduced machine downtimes, increased machine efficiency. Square shaped feeder for B1 sized sheets to increase the machine productivity. Easy pallet placement. Energy saving zone heating system with fastest heat up time. Feeder: 2-way accessible high pile pallet feeder with Komfi double action feeding head. Precise and constant sheet overlap achieved thanks to the sheet registration system using a mis-feed sensor, front lays, accelerating in-feed pulleys and guiding plates to prevent thin paper from wrinkling. Laser guided pallet driving system with quick adjustable lateral stops and air nozzles. Combined air / vacuum compressor. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: High-polished chrome laminating roll, with deep drilled sensors located close to the film surface. Dry, low inertia multi zone heating system using resistance heater, temperature detection by deep drilled sensor with the touch-less signal convertor. Fsdpfx Aozia S Nshvogf Laminating rolls are belt driven to achieve outstanding sheet surface quality for special metallic and holographic films. Pneumatic nip pressure applied by durable polyurethane coated pressure roll, with nip stoppers for thick sheets and windows lamination. „On-the-fly” side adjustable air expansion unwind shaft, with automatic film tensioning and capacity detection. Height adjustable film spread roll to smooth wrinkles on film. Zone heating of the laminating roller keeps roll temperature even and saves energy when laminating small formats. Separator & Delivery: Pneumatic pull roll with adjustable nip force to create tension for sheet decurling. Dual roll/bar decurling adjustable unit with position detection to have sheet registered for its separation. Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Automatic stacker. Options: Film slitter to cut film to the requested width. Additional On roll perforator. Effect foiling device (OTF). Pallet fine positioning tool. Hot knife with variable rotation speeds for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Air ionizer (behind the snapping roll) – helps smooth unloading of sheets on the unloading table without static charge. Windows lamination kit. Strip lamination kit.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, wire diameter (max.): 0.3 mm, overall weight: 5,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details. • Control: Mitsubishi CNC control • Machining type: wire erosion cutting (Wire EDM) • Dielectric system: water-based dielectric system • Cooling/filtration: integrated dielectric filtration system • Automatic wire threading: included • Wire type: brass wire (e.g. OBN 0.25 mm) • Wire diameter capability: approx. 0.1–0.3 mm • Wire diameter (standard range): 0.15–0.30 mm (standard 0.30 mm) • Application: precision cutting of conductive materials • Typical materials: hardened steel, tool steel, carbide, aluminum • Axis travels: U ±100 mm, V ±100 mm • Maximum workpiece dimensions: X 1250 mm, Y 1020 mm, Z 505 mm • Maximum workpiece weight: 3000 kg Fodpfxsy Egnxe Ahvogf • Tank weight (empty): 450 kg • Generator weight: 240 kg • Required door opening (W x H): 2587 x 2815 mm • Power supply: 3 phase 400 V AC ±10% 50/60 Hz • Minimum fuse protection: 32 A slow • Pneumatic pressure: 5–7 kgf/cm² (500–700 kPa) • Air consumption: minimum 42 l/min (more than 75 l/min for AT system with 0.1 mm wire) • Air connection: 3/8" • Machine footprint length: approx. 3299 mm • Minimum clearance around machine: 1 m • Recommended working platform height: minimum 500 mm • Handling requirement: forklift minimum 10 t capacity, fork length minimum 3.5 m Additional equipment • Power supply transformer: 20 kVA • Dimensions: 1.2 x 0.4 x 1.2 m • Weight: 300 kg • Ionizer unit: E.KO ionizer system (included)

Condition: like new (used), Year of construction: 2022, operating hours: 13,394 h, functionality: fully functional, Battery-powered high-performance sweeping/scrubbing machine Scrub and sweep in one pass: with the M17 battery-powered ride-on scrubber-dryer from Tennant® Without chemicals, but with ec-H2O™ technology and ionized water: This is how you clean floors economically and environmentally consciously with the Tennant® M17 ride-on scrubber-dryer. In addition to the environmentally friendly cleaning technology, you benefit from the ease of use of the cleaning machine - whether in use or during maintenance. Conveniently inspect suction feet, brushes and filters via tool-free access points. The double side sweeping brushes also enlarge the cleaning path and ensure highly productive sweeping and scrubbing. The Touch-n-Go™ control panel integrated in the steering wheel enables intuitive 1-hand operation. This allows the driver to keep both hands on the steering wheel and steer the industrial scrubber-drier safely. The chemical-free ec-H2O™ technology effectively removes dirt and leaves floors without chemical residue. This improves traction and prevents slipping accidents when cleaning with the Tennant® M17 ride-on scrubber-dryer. With 2,500 psi high-pressure cleaner for removing coarse dirt Area of application: Industry Voltage: 36 V Battery voltage: 36 V/per unit Charger: external Direction of travel: Reverse, forward Dirty water tank capacity: 346 l Working width: 1220 mm Brush speed: 500 rpm Brush motor power: 1125 W Automatic brush switch-off: yes Number of wheels: 3 Wheel width: 127 mm Operator cockpit: yes Suction foot width: 1245 mm Body color: green Width: 1370 mm Drive: Battery Brush material: Polypropylene (PP) Rim material: Iron Sweeping width side brushes: 785 mm Sweeping width without side brushes: 915 mm Sweeping capacity with 2 side brushes theoretical: 17560 m²/h Sweeper type: Ride-on sweeper Number of sweeping blades: 1 Power transmission: V-belt Steering wheel material: PU foam Length: 2850 mm Castors Material: Polypropylene (PP), nylon, polyester Dirt container volume: 45 l Side brushes foldable: yes UVP: 120.307 € Technical features Fgjdpfxjv Hqh Ho Ahvjf Sweeping rollers + side brushes Height-adjustable: depending on brush pressure Practical area coverage: 10,310 sqm incl. Ech2o Climbing ability: transport (empty) 20%, transport gross weight 13%, working mode 11% Consumption: Runtime 2.9 hours Operation: Battery Battery type: Lead-acid battery Battery capacity: 775 Ah/per unit Driving speed: 5 - 9 km/h Noise level in dB(A): 75 dB(A) Fresh water tank capacity: 285 l Theoretical area coverage: 17560 m²/h Brush diameter: 230 mm Brush contact pressure: 250 kg Tire material: Polyurethane (PU) Non-marking wheels: yes Wheel diameter: 381 mm Suction lip material: Linatex Suction motor power: 1200 W Frame color: grey Height: 1480 mm Own weight: 2165 kg Number of batteries: 1 Weight without battery: 1515 kg Filter area: 51000 cm² Sweeping width with 2 side brushes: 1700 mm Sweeping capacity with 2 side brushes practical: 10310 m²/h Sweeper filter cleaning: electric Sweeping principle: Direct sweeping system Body material: ABS plastic Running time: 6.5 h Number of swivel castors: 1 Reverse gear: yes Number of side brushes: 2 Seat material: Plastic Turning radius: 3003 mm Year of construction: 2022 Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: good (used), Year of construction: 1994, Technical data: - Manufacturer: Heesemann Bdjdmayow Dplws Tmbeh - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules seen in the direction of flow: Fodpfx Asxiy Htjhvjgf 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized - Seperat control panel with hight adjustment included ( see pictures )

Year of construction: 2025, condition: ready for operation (used), This Barberan WM-33 was manufactured in 2025. A profile wrapping machine designed for versatility, it handles various materials including PVC and aluminum. It supports a wide range of foil types and utilizes PUR hot melt adhesives. Key features include a max mechanical speed of 60 m/min, profile dimensions up to 300 mm wide and 120 mm high, and a total machine length of 6000 mm. Contact us for more information about this machine. Additional equipment • Machine bed, slot nozzle head, mounts for wrapping tools • Complete tool set for PVC/Aluminum profiles • Operator safety system and control cabinet • Set of nozzles for profile cleaning • Protective foil unwinder and hot air turbines • Infrared screen with lamps and tool cassette Machine Benefits Qualitative Machine Benefits • Machine entry section with heavy-duty steel frame • Transport rollers with motor-driven frequency converter • Integrated control cabinet • Emergency safety systems • Glue unit safety mesh • Operator control panel for adhesive management • Two 15 mm wide rollers per shaft, 240 mm diameter • Quick positioning in 5 mm steps • Air blowers & ionization for static and dust removal • Automatic primer station with precise application Technical Machine Benefits • The profile wrapping machine is designed to wrap profiles of various shapes, sizes, and materials using different foils with hot melt adhesives. • Operates as a standalone unit or part of a complete production line. • Capable of working with materials such as pvc, aluminum, and some composites. • Various foil types are compatible, special configurations may be needed for certain materials. • Profile dimensions: width 25–300 mm, length ≥600 mm, height 4–120 mm • Foil dimensions: width 25–330 mm, outer roll diameter ≤600 mm, inner roll diameter 76 mm • Max mechanical speed: 60 m/min • Working height: 900 mm • Voltage: 400v – 50hz • Compressed air: 6 bar Extra Information Machine still under power. 6 self-regulating heaters, expandable to 8. Slot Nozzle Head (330 mm) for adhesive application. Roll diameter up to 600 mm. Magnetic powder brake for tension control. Infrared screen for foil heating. Foil applied with shaped rubber rollers. Quick profile shape change system. For foil rolls up to 600 mm diameter. Fgedpfx Ahjyaa Utjvsf Height-adjustable for pressure control. The system is versatile with components designed to enhance processing efficiency and adaptability for various production needs. Dimensions Machine Depth 6000 mm

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. Fsdpfx Aheff Huwevogf • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Year of construction: 1997, condition: good (used), • Working width (mm): 1300 • CSD system • Cross-sanding unit Fgodpfsidi Ivjx Ahvof • Longitudinal sanding unit - shoe • Brushing unit • Ionization

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG Sandteq w-300 Technical Data: - Feed belt speed: 2.5 - 13 m/min - Working height: 900 mm - Working width: 1350 mm - Number of processing units: 2 - Workpiece thickness: 3 - 160 mm with automatic measurement - Machine dimensions (LxWxH): approx. 2115 x 2100 x 2415 mm - Machine weight: approx. 4000 kg Fgedjxczmzjpfx Ahvsf - Total electrical power: approx. 39 kW - Recommended main fuse: 80 A - Vacuum table - Q = Cross sanding unit Poly V-belt / 13.5 kW (2-16 m/s) - X = Combination unit with contact roller & pressure beam system / 18.5 kW (2-18 m/s) - Super-finish function: calibration, veneer & intermediate lacquer sanding, veneer & fine lacquer sanding - Brushing unit - Cleaning rotator with ionization - Powercontrol with Powertouch The machine is available immediately. Loading onto truck possible.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Automatic Desiccant Cap Dosing and Assembly Line – REBEL RV5959 (Year 2012) This fully automated line receives unprocessed plastic caps and converts them into functional caps with integrated desiccant for containers requiring controlled humidity. Designed for pharmaceutical, nutraceutical, cosmetic and food industry applications. The system integrates the following operations in a single line: • Cap feeding • Punching and insertion of cardboard barrier discs • Precise dosing of heated silica gel • Thermal and anti-static control • Insertion of inner plastic seal • 100% inspection by machine vision • Dynamic weighing and automatic rejection • Final accumulation on rotary carousel • Dual-lane production • Multi-station servo-driven rotary carousel The line is equipped with: • 2 stainless steel feeders + conveyor systems • Dual external support for cardboard reels • Industrial aspiration/extraction unit • Servo-driven rotary table • Complete VARPE V2000 checkweigher with rejection system Fedpfx Asx Hh R Rjhvjgf • Six-position outfeed carousel • 5 Basler cameras + Cognex VisionPro software • Heated silica dosing hopper • Anti-static ionizing unit • 24 high-precision volumetric dosing chambers • Electrical cabinet with PLC, HMI and industrial PC • Integrated dehumidification system

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Fodpfexq Exqsx Ahvjgf

Year of construction: 2022, condition: like new (used), New digital label printing machine Valloy Bizpress 13R. The equipment was only used for demonstration purposes. Toner-based LED printing technology Color configuration: CMYK Fgedpfjwwg N Tex Ahvof Printing speed: 7.3 m/min Printing resolution: 1200x1200 dpi Media width: 210 - 330 mm Printing width up to 304 mm Media thickness: 50 - 350 microns (30 - 350 gsm) Media type: paper, PP, PVC, PE Eye-mark sensor for pre-printed or cut media Unwinder & rewinder max. roll diameter 450 mm Size: 1400x850x1000 mm Features: Pneumatic expandable unwinder and rewinder Web guiding system with splice table Media cooling system High voltage anti-static ionizer Electric tension control via magnetic powder brake Machine inspection and testing are welcome. Installation and training can be provided for an additional fee.

Condition: used, Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 720 mm, table width: 710 mm, table length: 1,200 mm, Equipment: documentation/manual, Clamping table with M8 clamping holes Monitor 19" Electrode changer 18-fold Guide changer 3-fold Plastic protection at the front of the table NSD PC control unit Z-axis programming with switch-off Automatic zeroing of the Z-axis during drilling Automatic approach cycles Crash monitoring during positioning Latest generator technology with multi-pulse function Filter with filter pump Automatic intermediate guide Fgodpfx Astpa Adohvsf Z-axis for 700 mm electrodes W-axis force compensation Ionizing unit Filter & high pressure pump Work light Remote control unit Ionization control Various tools in toolbox

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 5211291, feed rate X-axis: 16 m/min, grinding width: 1,350 mm, power: 15 kW (20.39 HP), grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, TECHNICAL DETAILS Sanding width: 1,350 mm Abrasive belt length: 2,620 mm Workpiece thickness: 3 to 160 mm Feed speed range: 3 – 16 m/min (infinitely variable) MACHINE DETAILS Fodpfxsyx Et To Ahvogf Motor power: approx. 15 kW Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,500 x 2,500 mm Machine weight: approx. 4,300 kg EQUIPMENT Cross unit for intermediate lacquer sanding Combination unit (roller + sanding pad) Electronic segmented sanding pad for precise surface finishing Finishing brush for perfect end results Ionization device for dust neutralization Dust extraction with propeller fan for a clean working environment Touchscreen control for user-friendly operation Calibrating and fine sanding in a single pass High flexibility due to multiple units Robust construction for industrial use Ideal for processing lacquered, veneered, and solid wood panels Note: The above data is taken from the manufacturer’s brochure or documentation and may differ from actual values.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, working width: 1,350 mm, overall weight: 10,000 kg, input current: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base Conveyor unit with a single transport belt, adjustable feed speed from 3 to 15 m/min by frequency inverter, including transport belt cleaning device. Constant working height of 920 mm. Automatic adjustment for various workpiece thicknesses (3 - 80 mm) via motor-driven movement of the upper machine section. The lifting gear’s toothed belt is dust-protected, and its operation is monitored via the integrated control cabinet. 1. Cross Sanding Unit Belt dimensions: 5,400 x 150 mm Drive power: 13/17 kW Sanding belt with additional blast tube for belt cleaning, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning system, and belt alignment control. Includes a door with glass window. 2. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Drive power: 13/17 kW Belt with double cleaning nozzles, wear-resistant brake unit, automatic belt length compensation, sanding belt operation counter to feed direction, intermittent belt cleaning, and infrared belt control. The front roller (steel) has an eccentric bearing for light calibrating, controlled from the operator terminal. 3. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Belt speeds: 0.5 – 18 m/s Drive power: 17 kW with frequency inverter Continuously adjustable sanding belt speed, double cleaning nozzle setup, wear-resistant brake unit, automatic belt length compensation, counter-feed direction sanding, intermittent belt cleaning, and infrared belt control. Fgsdpfxsxp Hvne Ahvsf 4. Brush Roller Unit Centrally height adjustable, includes extraction hood and press-on roller. Roller diameter: 150 mm Drive power: 1.5 kW Bristles: fiber 5. Workpiece Suction Device Ensures safe transport of workpieces shorter than 500 mm in the feed direction, with integrated extractor fan. Voltage: 400 V, 50 Hz Belt exchange: left Operator terminal: left 6. Ionization Bar (from above) Removes static electricity, including high-voltage transformer. 7. Workpiece blow-off device with rotating compressed air nozzles inside the frame. The machine is ready for operation at your facility after mechanical and electrical overhaul by an authorized Heesemann service partner. Fitted with a new conveyor belt. Commissioning and training at your site may be arranged subject to negotiation. Transport costs negotiable – loading included in the price. If you have any questions, feel free to contact me. Paweł Szczepański +48 795 517 258

Condition: excellent (used), Year of construction: 2019, UV ink printer, year of manufacture and installation 2019 - production Japan Fedpfx Ahjmcw S Sovogf According to the attached counter capture - 1,551 operating hours and 37,000 sqm printed. Perfect working condition - equipment is in production and can be viewed / tested Working table and material dimensions: Fixed table with dimensions of 125 X 250 cm and payload of 34 KG; Maximum material thickness - 5,08 cm; High power vacuum system - 6 vacuum zones; 5 pneumatic guides. Minimum per support with guides 60X80 cm; Printing heads: 2 piezoelectric heads 636 nozzles per channel and variable drop between 6 and 42 picolitres; Maximum print area covered by the heads is 126 X 251 cm for edge to edge printing; Nozzle detection and compensation system; Automatic self-cleaning optional not mandatory. Number of colours : Digital Printer UV ink; 4 colours - CMYK (Cyan, Magenta, Yellow, Black) with the possibility to reactivate 6 colours white + transparent colourless lacquer. Resolution and Productivity : Maximum resolution 1440 dpi; Express speed - 58,7 mp/hour; Production speed - 35,7 mp/hour; Quality speed - 25,3 mp/hour; Quality speed 2 layers - 12,5 mp/hour; UV ink barrels - minimum 1 litre. Accuracy: Line thickness: Maximum error +/- 0.8 mm per 2.5 m side; Maximum error +/- 0.4 mm on 1.25 m side. Straightness: Maximum error +/- 0.7 mm on 2.5 m side; Maximum error +/- 0,5 mm on 1,25 m side. Diagonal error: Maximum error +/- 1,0 mm on 2,5 X 1,25 m. Other: Patented solution to achieve grey gradients; Stand/Working stand Ionizing bar (electrostatic discharge) Special bridge for loading and moving equipment. EXW - old price 49.000 euro - new price 35.000 (without VAT in EU)