Wide-belt sander

HOMAG SANDTEQ W-300

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Lsdpfx Aow Nx A Ijfwohk Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: good (used), Year of construction: 1994, 2-sided planing machine, top and bottom Constant table (always the same feed height) Lhodpfx Afjhuthyowok Max. planing width: 600 mm Max. planing height: 280 mm Planer shafts with strip knives Ready for immediate use.

Condition: used, Year of construction: 2020, Working width: 510 mm Planer head: Silent Power Lsdpfx Afezq Db Rjwjhk Infeed table length: 2250 mm Adjustable angle of the fence: yes, 45° to 90° Maximum feed thickness for thickness planer: 250 mm Thickness table height adjustment: electric Indication of the planing thickness: digital display Feed rate: 4 - 16 m/min, continuously variable Infeed roller: steel Outfeed roller: steel Pressure bar: articulated pressure bar Motor power: 7 kW Motor brake: yes, automatic Dust extraction connection: 150 mm Machine length: 2200 mm Machine width: 1050 mm Weight: 900 kg

Condition: excellent (used), Year of construction: 2021, Used HOMAG Drillteq V-200 - Year of manufacture: 2021 - Immediately available - Excellent condition Lhodozdvuvspfx Afwsk - Tools can be included for an additional charge. Please feel free to contact us if you have any questions.

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, Lhedpfeu R Szaox Afwsk power supply and compressed air connection. - new exhibition machine -

Condition: used, Year of construction: 2004, machine/vehicle number: 02919475, - Manufacturer Cefa - type. KLEENSPRAY - Year of construction 2004 - Operating side left - Working width 1.200 mm - Working height 900 mm + - 20 mm - Gun drive single version - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed 1.5 - 7 m/min - PLC control with touch screen - Number of spray guns installed 0 pcs. - Height-adjustable spray guns - Number of paint pumps 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length 4,450 mm - Width 3,360 mm + 1000 mm - Height 2,600 mm - Total connection ~ 7.1 kW / 28.6 A - Volt, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5 _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. Lhjdpfov N D Ewjx Afwok For further information, get in touch with us!

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle non-replaceable Ljdpjfpb Nmofx Afwjhk 30 mm Clamping height 140 mm Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Ljdsh Akm Topfx Afwshk

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3 Lsdpfxswu Ackj Afwshk

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr Lhodpowqdbmjfx Afwek