Wire EDM Machine

Mitsubishi MV2400S

Condition: excellent (used), Year of construction: 2015, operating hours: 9,014 h, functionality: fully functional, machine/vehicle number: MV2400S, overall weight: 3,500 kg, total length: 2,687 mm, total width: 3,030 mm, total height: 2,150 mm, input voltage: 400 V, input current: 50 A, type of input current: three-phase, input frequency: 50 Hz, Accessories: - ODS optical drive system - Tubular Direct Drives on X, Y axis - Scale on X, Y axis - Intelligent automatic wire feeding system (wire diameter 0.1 - 0.3 mm) Nsdpfxjvvt Afo Ah Uelk - (Can be used both dry and underwater) - Wire straightening system - Automatic wire cutter (for thicker wires) - Automatic hole search - MITSUBISHI M700 controller - 3D CAD/CAM control system - 5 controlled axes + prepared for additional axes - PFC precision finishing (Precise Finish Circuit) - LLS long life system - 10 kg wire coil holder (receiver) - U-shaped hardened segmented receiving table - Compressor dielectric (water) cooler equipment - Remote communication preparation (mcAnywhere) - CE version - H/W 30°/45° (30/45° cutting capability instead of 15° for 0.25 mm wire Controller: - MITSUBISHI ELECTRIC "ADVANCE Plus" control software. - MITSUBISHI M700 control with 3D CAD/CAM software. - 10 GB memory - 15" touch screen - Clear layout of the main functions on the screen. - Programming with ESPERADVANCE conversational system. - The controller is prepared to receive 3D files. - Graphical inspection: 3D, front view, side view, top view. - Hand-held control unit. - Ethernet TCP-IP and 2 USB connection options - Preparation for remote communication (mcAnywhere)

Condition: used, TECHNICAL DETAILS - Table dimensions : 700 x 480 [mm] - Dielectric capacity : 600 [l] TRAVELS - Travels on X/Y/Z axes : 350 x 250 x 250 [mm] - Travels on U/V axes : +/- 90 [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 900 x 680 x 250 [mm] Nsdpfsuhq Rlex Ah Ujlk - Max. part weight : 400 [kg] - Finishing quality : 0.125 [μm] WIRE GUIDE - Wire diameter : 0.15 - 0.30 [mm] - Coil weight : 5 - 8 [kg] - Speed : 30 - 270 [mm/sec] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2500 x 2500 [mm] - Machine height : 2200 [mm] - Machine weight : 2890 [kg] MACHINE HOURS - Number of working hours : 1266 [h] EQUIPMENT - CNC : Charmilles Pentium III CPU - Remote control - Cooling unit

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2758, TECHNICAL DETAILS Travel paths X / Y / Z: 600 / 400 / 300 mm Cutting capability: H/W 30°/45° (30/45° instead of 15° for 0.25 mm wire) Control unit: MITSUBISHI M700 Control software: MITSUBISHI ELECTRIC “ADVANCE Plus” Replacement of X and Y linear scales: November 2022 MACHINE DETAILS Total weight: 3,500 kg Overall length: 2,687 mm Overall width: 3,030 mm Overall height: 2,150 mm Input voltage: 400 V Input current: 50 A Type of current: Three-phase Input frequency: 50 Hz EQUIPMENT - ODS optical drive system - Direct drive motors for the X and Y axes - Linear scales on the X and Y axes - Intelligent automatic wire feeding system (wire diameter 0.1–0.3 mm) - Wire straightening unit - Automatic wire cutter (for thicker wires) - Automatic hole detection - 3D CAD/CAM control - 5 controlled axes + preparation for additional axes - PFC precision machining (Precise Finish Circuit) - LLS longevity system - 10 kg wire spool holder (reel) Nljdpfx Ahswr Acls Usk - U-shaped, hardened, segmented receiving table - Compressor dielectric (water cooling) - Preparation for remote communication (mcAnywhere) - CE version - Clear display of main functions on the screen - Programming with ESPERADVANCE interactive dialog system - Control unit prepared for receipt of 3D files - Graphical inspection: 3D, front view, side view, top view - Handheld control device - Ethernet TCP-IP and 2 USB connection options - Preparation for remote communication (mcAnywhere)

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition. Nlodpfxexcp Sls Ah Uok

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, GF MachiningSolutions CUT E350 Nledpfxexbzimj Ah Uok Year of manufacture: 2017 Control: AC CUT HMI Travel distances (X/Y/Z): 350 x 250 x 250 mm Travel distances (U/V): +/- 45 mm Taper: +/- 30° at 77 mm height Workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Collision protection on X/Y/Z axes Best surface finish on carbide/steel: 0.12/0.18 µm Maximum cutting speed: 300 mm²/min Overall dimensions: 1750 x 2470 x 2200 mm Total weight: 2525 kg The machine is cleaned, overhauled, and tested by us after receiving your order. We are happy to perform a test cut tailored to your needs. Optional services: - Commissioning and training - Transport - Warranty - Cooling unit

Condition: used, Year of construction: 1990, thickness of jaw 200 mm Nledpefgv Dfjfx Ah Usk 130 mm weight of the machine ca. 120 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: like new (used), Year of construction: 2019, Equipment: refrigerant dryer, Kaeser SM 13 Screw Compressor Manufacturer: Kaeser Model: SM 13 Year of manufacture: 2019 Max. operating pressure: 11.0 bar Rated power: 7.5 kW Includes TB 26 Refrigeration Dryer Year of manufacture: 2019 Nlsdpfx Aoxt Rhpeh Uok

Condition: new, overall weight: 340 kg, Atlas Copco G11FF screw compressor Specifications: Njdpsh Unupjfx Ah Uolk - condition - New - manufacturer - Atlas Copco - capacity - 1440 l/min - main engine power - 11,0 kW - tank - 500 l - maximum operating pressure - 10.00 atm - built-in refrigeration dryer - electronic setting of compressor operating parameters - soundproofed cabin (only 67 dB) - meets CE standards - weight - 340 kg Additional information: - possibility to obtain a manufacturer's warranty after commissioning by an authorized Atlas Copco service center - instruction manual in Polish and a set of documents for the Office of Technical Inspection - available immediately or within 7 working days

Condition: used, Year of construction: 2017, Technical details: travel -x axis: 600 mm travel -y axis: 400 mm travel -z axis: 310 mm max. size of workpiece LxWxH: 1.050 x 800 x 295 mm max. workpiece weight: 1.500 kg table-size: 840 x 640 mm U-axis: + / - 75 mm V-axis: + / - 75 mm conical grinding: 15° / 260mm rapid traverse: 1,3 m/min wire dia.: 0,1 - 0,3 mm wire-forward-feed: max. 23 m/min weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,7 x 3,1 x 2,2 m wire eroding machine, Nsdpfx Ajx Hp Nheh Uelk autom. wire threading (AWT), chiller, tank incl. ion-exchange resins, clamping devices, reference tooling, aligning tools for wire, documentation aüürox. 9.100 h "machine on", approx. 4.200 h "working hours" *

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 2520 mm Nlsdpfxex D Rcze Ah Ujk Measurements height 2290 mm Machine weight 4400 kg Main Drive Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 160 mm U-Axis Movement 160 mm Workpiece Workpiece weight 800 kg This 5-axis EXCETEK V 650 G was manufactured in 2013. It's a wire EDM machine capable of handling workpieces up to 1000 × 700 × 345 mm and 800 kg. Features include X, Y, Z travels of 650 mm, 400 mm, and 400 mm respectively, plus U/V-axis travel of 160 × 160 mm. It boasts a solid cast-iron construction and a stainless steel worktable for enhanced durability and precision. Contact us for more information about this machine. Application Types EDM