Used Stamping Press (Servo) + Decoiling Line for sale (24,317)

Condition: used, Single-column – Eccentric press RICHTER Type PEKRS 80 Year of manufacture 1970 – Overhauled in 2024 Clamping force 80 tons Reach 350 mm Table size 900 x 650 mm Through-hole in the mounting table Ø 200 mm Ram area 700 x 500 mm Stroke rate 70 strokes/min Stroke adjustment 6 – 100 mm Ram adjustment 85 mm Installation height max. 400 mm Arbor hole Ø 50 mm Table height above floor 810 mm Motor power 8 kW Power connection 400 volts, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with shear plate in the ram Godpfoi Db Ibsx Al Asud - Grease central lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest safety standards with new electrical system Control system rebuilt in 05/2024 – suitable for manual feeding operations – in accordance with DGUV Information 209-030 Press Inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machinery - Presses - Part 1: General safety requirements EN ISO 16092-2: Machinery - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for quick fault localization - New electrical cabinet, mounted on the side of the machine - Completely based on SIEMENS, with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and interlocking - Electric foot switch - Cam mechanism with run-on monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure gauge - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand 3 = Single stroke, foot 4 = Continuous operation, foot 5 = Automatic continuous operation 6 = Reverse operation

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Gusdpsif Sg Sjfx Al Asd Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 125 t, Single-column press – Manufacturer: Durendus – 125 t servo press – Table 2200 × 750 mm For sale is a hydraulic C-frame servo press from Durendus with an adjustable pressing force of up to 125 t and integrated 50 t ejector. Thanks to modern servo-hydraulics, this machine offers up to 40% reduced energy consumption compared to conventional systems and is ideal for demanding assembly, forming, and production processes. ===== Technical data & information: Hydraulic servo press – C-frame – 125 t ==== General Specifications - Manufacturer: Durendus - Model: Single-column press / servo press - Design: C-frame press - Pressing force: 20 – 125 t (adjustable) - Machine weight: approx. 8,700 kg - Dimensions (W × D × H): approx. 2,400 × 2,000 × 3,300 mm - Table height: 870 mm - Installation height: max. 1,000 mm ==== Table & Ram - Table area: 2,200 × 750 mm - Ram area: 980 × 750 mm - Guidance: 4 guide columns Ø 100 mm - Tool centering: 50 mm receptacle - Preparation: Vibration damping plates (30 mm) - Preparation: Robot interface ==== Ejector - Ejector force: 50 t - Ejector stroke: 200 mm ==== Hydraulic Cylinder - Stroke: 0 – 700 mm (adjustable) - Working pressure: max. 245 bar - Return speed: 300 mm/s Godpfxjx Aqtqs Al Aoud - Idle speed: 300 mm/s - Pressing speed: - up to 25% load: 25 mm/s - up to 50% load: 14 mm/s - up to 80% load: 7 mm/s - up to 100% load: 6 mm/s ==== Hydraulic Unit - Servo hydraulic pump: Duplomatic, 143 l/min - Servo motor power: 15 kW - Pressure accuracy: ± 5 bar - Pre-fill valve: NG-160 ===== Assembly, forming technology, series production, automated manufacturing, toolmaking, energy-optimized pressing processes Servo press, single-column press, C-frame press, hydraulic press, industrial press, production press, energy-efficient press, die spotting press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for a custom quote. Our hydraulic presses are manufactured in accordance with both German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon those regulations. Our core expertise lies in special-purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. We primarily use components from leading European manufacturers for the press hydraulics.

Condition: new, pressing force: 280 t, 280 t servo double-column heated press with heating plates We can offer you this press at a particularly attractive price, as the machine is already under construction and the original customer has cancelled an order for two identical machines. This gives you the opportunity to purchase a high-quality servo-hydraulic double-column press with heating plates under favorable conditions and with comparatively short lead times. The photos shown depict similar, previously built machines from the factory and are for reference purposes only. Technical data & information: ==== General information Press force: 280 t Design: servo double-column heated press Main cylinder: 1 Auxiliary cylinders: 2 Guidance: 4-column guides Clear width between uprights: 1,250 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. damping plates and heating plate: 900 mm Overall height approx.: 3,500 mm Width incl. control cabinet approx.: 2,200 mm Depth approx.: 1,200 mm Weight approx.: 13,000 kg ==== Table & Ram Fixed lower table with T-slots: 1,250 × 800 mm Ram with T-slots: 700 × 800 mm Heating plate: 600 × 600 × 80 mm ==== Speeds Approach speed: 100 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec ==== Hydraulics & Drive/Electrics Hydraulic power unit: Duplomatic Hydraulic pump: Rexroth / Baumüller / Servo Pump capacity: 72 l/min Motor power: 10 kW Servo hydraulics: included Control: Siemens S7-1200 with Siemens MTP 1000 touchscreen display Programming: up to 50 programs Travel measurement: encoder Pressure measurement: data recording ==== Equipment Digital control for stroke, pressure, speed, and changeover positions Passive pressure-holding function for up to 15 minutes Electrically heated plates up to 250 °C Heating capacity: 24 kW Temperature monitoring and heating element control via monitor Piece counter Alarm management Downward accuracy: 0.1 mm Stroke limitation via Leuze measuring rod and monitor Two-hand operation Ram return via operating button Light curtain protection front and rear up to 2,500 mm height CE certificate and user manual included Control cabinet with Siemens components Guedpfx Aleyynalo Aod Safety systems by Sick / Pilz / Keyence / Datalogic ==== Additional included features 40 mm thick base plate with chamfered ramp 4 vibration damping plates Energy-saving servo hydraulics Applications: Heated presses, compression molding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical molded parts, lamination processes, industrial special applications Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, compression molding press, press with heating plates, industrial machine, special machine, tool adjustment press, tryout press, tool try out press.

Condition: new, pressing force: 1,100 t, 1100 t Servo Double-Column Heated Press with Heating Plates We can offer you this press at a particularly attractive price, as the machine is already under construction and the original customer has cancelled their order for two identical units. This provides an opportunity to purchase a high-quality servo-hydraulic double-column press with heating plates under attractive terms and with comparatively short delivery times. The photos shown display similar, already completed machines from the factory and are for reference purposes only. Technical Data & Information: Godoyyna Sopfx Al Asud ==== General Specifications Press force: 1,100 t Design: Servo Double-Column Heated Press Main cylinder: 1 Auxiliary cylinders: 2 Guidance: 4-column guides (Ø 150 mm) Clear opening between columns: 1,600 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. shock absorber and heating plate: 1,000 mm Overall height approx.: 4,600 mm Width incl. control cabinet approx.: 3,250 mm Depth approx.: 1,700 mm Weight approx.: 41,000 kg ==== Table & Ram Lower fixed table with T-slots: 1,600 × 1,100 mm Ram with T-slots: 1,500 × 1,100 mm Heating plate: 1,100 × 1,100 × 140 mm ==== Speeds Approach speed: 100 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec ==== Hydraulics & Drive/Electrics Hydraulic unit: Duplomatic Hydraulic pump: Bosch Rexroth / Baumüller / Servo Pump capacity: 240 l/min Motor power: 32 kW Servo hydraulics: included Control system: Siemens S7-1200 with Siemens MTP 1000 touchscreen display Programming: up to 50 programs Position measurement: encoder Pressure measurement: digital data acquisition ==== Equipment Digital control for stroke, pressure, speed, and changeover positions Passive pressure holding up to 15 minutes Electrically heated plates up to 250 °C Heating power: 60 kW Temperature monitoring and heating rod monitoring via monitor Piece counter Alarm management Downstroke accuracy: 0.1 mm Travel limitation via Leuze measurement rod and monitor Two-hand operation Ram return via control button Light curtain safety front and rear up to 1,900 mm height CE certificate and user manual included Control cabinet with Siemens components Safety systems from Sick / Pilz / Keyence / Datalogic ==== Additional Included Features 40 mm thick base plate with chamfered ramp 4 vibration damping pads Energy-saving servo hydraulics Applications: Heated presses, compression moulding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical moulded parts, lamination processes, industrial large-scale production, special purpose machinery manufacturing Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, compression moulding press, press with heating plates, industrial machinery, special-purpose machine, tool trial press, tryout press, tool try out press

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Godpfxevkbrqe Al Aoud Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Year of construction: 2002, condition: excellent (used), Machine used for disassembly in very good condition. Godpfx Aohq Dcyol Asud We can also offer a disassembly and assembly service as well as technical inspection.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram Gedpfx Aoxpqy Dol Aoud - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Gusdpfsx Ezkuox Al Ajd Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 6,000 sheets / hr Top EFF specification High speed MABEG suction feeder : 6 heating zones : 3 x electronic servo longitudinal foil feeds : 3 x transverse foil feeds : 3 line hologram capability : non stop delivery

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 TP150 Model Amada TP-150EX Weight 16 tons Accessories Sick Guards Hydraulic Overload Variable Speed Drive Hydraulic Tool Clamping Capacity 15o tons Supplied New July 2000 Stroke 175mm Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Ram Adjustment 100mm (motorised) Die Height 390mm Gedpjn Smg Tsfx Al Aeud Ideal for automotive or aerospace sheet metal press work New c and h frame presses also available.

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Godpfx Aetx E Rqol Asud Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. Gedsv Hqnaepfx Al Asud New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Gusdpfew Uc T Iox Al Asd Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700

Condition: new, Year of construction: 2026, functionality: fully functional, spindle motor power: 22,000 W, total length: 4,300 mm, total height: 2,960 mm, total width: 2,300 mm, overall weight: 10,600 kg, product height (max.): 370 mm, feed length X-axis: 600 mm, feed length Y-axis: 270 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, operating speed: 80 mm/s, # HYDRAULIC CNC SERVO PRESS BRAKE MTP 220×3200 | 220 T | MTP-3212 | 4 AXES X,Y1,Y2,R+V The brand-new MTP 220×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system, heavy-duty welded construction, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X-axis (back gauge) • Servo-driven Y-axis (ram control) • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ## Ergonomics & Safety Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity Gujdpfx Alozg Evhj Ajd • Operating manual ## Technical Specifications • Pressing force: 220 T • Maximum bending length: 3100 mm • Distance between columns: 2550 mm • Throat depth: 450 mm • Ram stroke: 270 mm • Maximum opening height: 370 mm • Table height: 920 mm • Controlled axes: X, Y, R + V • Main motor power: 22 kW • Hydraulic oil tank capacity: 200 L • Machine dimensions (L × W × H): 4300 × 2300 × 2960 mm • Machine weight: 10,600 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate operation.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle motor power: 11,000 W, total length: 3,870 mm, total height: 2,400 mm, total width: 1,550 mm, product height (max.): 455 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 200 m/min, workpiece weight (max.): 11,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, operating speed: 80 mm/s, # HYDRAULIC CNC SERVO PRESS BRAKE MTP 200×3200 | 200 T | MTP-3212 | 4 AXES X,Y1,Y2,R+V The brand-new MTP 200×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its heavy-duty welded frame, advanced CNC control system, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup for both single-part and high-volume manufacturing. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X-axis (back gauge) • Servo-driven Y-axis (ram control) • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system (Germany) • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ## Ergonomics & Safety Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity Guedpfx Alezg Ebws Asd • Operating manual ## Technical Specifications • Pressing force: 200 T • Maximum bending length: 3200 mm • Distance between columns: 2530 mm • Throat depth: 320 mm • Ram stroke: 200 mm • Maximum opening height: 455 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 11,000 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle motor power: 11,000 W, total length: 3,870 mm, total height: 2,400 mm, total width: 1,550 mm, overall weight: 7,400 kg, product height (max.): 390 mm, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, operating speed: 80 mm/s, # HYDRAULIC CNC SERVO PRESS BRAKE MTP 125×3200 | 125 T | MTP-3212 | 4 AXES X,Y1,Y2,R+V Guedpfszg Dk Djx Al Aod The brand-new MTP 125×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system and robust welded construction, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X and Y axes • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • LED working area illumination • Mobile control panel The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron safety components The machine is equipped with safety light curtains, side guards, a rear safety fence, emergency stop switches, a CE Declaration of Conformity, and an operating manual. ## Technical Specifications • Pressing force: 125 T • Maximum bending length: 3200 mm • Maximum sheet thickness: up to 6 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions: 3870 × 1550 × 2400 mm • Machine weight: 7400 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Year of construction: 2000, condition: used, 400 TON HYDROMEC HF4000 NON-FERROUS HOT FORGING PRESS LINE MANUFACTURER - HYDROMEC YEAR - 2000 SERIAL NUMBER - 660 MODEL - HF4000 C/D MATERIAL - NON-FERROUS TONNAGE - 400 TON (4000 KN) STROKE - 380MM STROKE PER MINUTE (CONTINUOUS) - 22-35 STROKE PER MINUTE (SINGLE STROKE) - 22-45 RAM ADJUSTMENT RANGE - 100MM CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) - 865MM SIZE OF TOOL MOUNTING PLATE - 1000MM X 1000MM MAIN PRESS MOTOR - 59 KW MAIN MOTOR RAM ADJUSTMENT - 2.2 KW CUSHION FORCE - 70 TON (700 KN) CUSHION STROKE - 40 - 110MM INCLUDES: AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS Guedozad Nhepfx Al Aod ELECTRICS PRESS CONTROLS

Condition: used, Year of construction: 2009, 1250 MT PRESEZZI BRASS ROD OIL HYDRAULIC EXTRUSION PRESS LINE W/ OCN HANDLING MANUFACTURER - PRESEZZI YEAR - 2009 SERIAL NUMBER - 2671-2009 PRESS TONNAGE - 1250 MT WORKING PRESSURE - 260 BAR BILLET DIAMETER - 145MM BILLET LENGTH MAX - 650MM MAIN CYLINDER (SINGLE ACTING) WORKING PRESSURE - 260 BAR RAM DIAMETER - 760MM POWER - 1149 MT SIDE CYLINDERS (DOUBLE ACTING) OPERATING PRESSURE - 260 BAR BORE - 160MM ROD DIAMETER - 100MM THRUST FORCE DURING EXTRUSION - 107 TON THRUST FORCE DURING RETURN - 65 TON TOTAL MAIN CYLINDER AND SIDE CYLINDER TRUST FORCE - 1256 TON CONTAINER MOVEMENT (DOUBLE ACTING) OEPRATING PRESSURE - 260 BAR BORE - 160MM ROD DIAMETER - 100MM SEALING FORCE AT 300 BAR - 107 TON OPENING FORCE AT 280 BAR - 65 TON SHEAR CYLINDER (DOUBLE ACTING) OPERATING PRESSURE - 260 BAR BORE - 100MM ROD DIAMETER - 70MM SHEARING FORCE - 20 TON ASCENDING FORCE - 10 TON HIGH PRESSURE REXROTH PUMP GROUP: MAIN PUMPS NUMBER OF PUMPS - 3 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A3VSO0500HSE/30R-PPH13N00 OPERATING PRESSURE - 260 BAR FLOW RATE - 500 CM3/ROTATION PER PUMP ROTATION SPEED - 1000 RPM PER PUMP POWER - 200 KW PER PUMP AUXILLARY PUMPS NUMBER OF PUMPS - 1 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A10VSO140DFR/31R-PPB-12NOO OPERATING PRESSURE - 160 BAR FLOW RATE - 140 CM3/ROTATION PER PUMP ROTATION SPEED - 1500 RPM PER PUMP POWER - 55 KW PER PUMP PILOT PUMP NUMBER OF PUMPS - 1 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A10VSO45 DFR/31-PPA12NOO OPERATING PRESSURE - 160 BAR FLOW RATE - 45 CM3/ROTATION PER PUMP ROTATION SPEED - 1500 RPM PER PUMP POWER - 18.5 KW PER PUMP CONTAINER PUMP NUMBER OF PUMPS - 1 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A11VO40DR/10R-NPC12NOO OPERATING PRESSURE - 300 BAR FLOW RATE - 40 CM3/ROTATION PER PUMP ROTATION SPEED - 1000 RPM PER PUMP POWER - 15 KW PER PUMP MAIN PRESS LINE COMPONENTS / FEATURES COIM AUTOMATED BILLET FURNACE WITH INFEED TABLE BILLET LOADING STATION Gedpszad Evjfx Al Aeud QUICK CHANGE DIE CHANGEOVER TABLE OCN SINGLE PULLER OCN WALKING BEAM COOLING TABLE OCN ENTRY FINISH SAW FEED TABLE OCN FINISH SAW OCN EXIT BUNDLING TABLE PRESEZZI OPERATORS DESK (LEFT HAND DIRECTION)

Condition: used, Hydraulic press line for deep drawing and forming processes, featuring multiple presses and automated parts handling. Manufacturer: Fritz Müller / Schuler Machine type: Hydraulic press line / transfer press Number of presses: 6 Guodpjy Ndz Rjfx Al Aed Press 1 Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 Press force: 12,000 kN Press 2 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 3 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 4 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 5 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 6 Type: ZE 800 – 40.3.1 Year of manufacture: 1993 Press force: 8,000 kN Max. workpiece size: 3,500 x 2,200 mm Max. tool weight: 32,000 kg Material thickness: 0.5 – 2.5 mm Max. drawing depth: 430 mm Documentation: No digital data available Drawings: Partially available as ink drawings, can be viewed onsite Packing lists: No packing lists with individual weights available Type plates: Not fully available, exact model designations only partially present Location: Radeberg

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm Guedpfxjlil Ewj Al Aod strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Year of construction: 1988, condition: used, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² Gujdpfx Aobicz Hjl Asd reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Condition: good (used), Code: 0377 Brand: COLOMBO R Model: PCA.S Guodjy I Sncjpfx Al Aed Automatic continuous-cycle hot-pressing line for the production of panels, furniture, doors, paneling, sandwich panels, and various Sturdy supporting structure Composition: 4-roll gluing machine OMMA- Width 1400 mm Disc transfer conveyor Preparation table Press COLOMBO 5500 x 1400 mm - n° 8 pistons - diameter 150 Solid steel platen Top-down pressing Pressure 4 kg/cm² Automatic unloading with photocell devices Work surface height 800 mm Closing times are reduced to 1–2 seconds and opening times to 2–3 seconds Overall dimensions press mm 5960 x 1900 x 2320 h Complete line length 22 mt Installation of the line does not require any foundation

Condition: used, Linear unit, linear axis, portal axis with servo drive, synchronous servomotor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO, type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical travel via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw drive Guide type: ball bearing guide, size 20 Payload: 60 kg Maximum speed of ball screw spindle: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Guodpfxsgf Ix Aj Al Aod Rated power: 1.912 kW Rated speed: 3500 rpm Current consumption: max. 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide slide - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition A virtually identical linear unit is available under storage number 59702.

Condition: new, Promess KA-EMF80 Servo Press 80 kN Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Condition: New Gusdjrgn Nnspfx Al Aed Calibrated: Yes Strain Gauge Amplifier: BA 624.u2 Financing through our bank is also available. komplett-konzept.leasingo.de Find more new and used servo presses in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 200 t, table width: 2,000 mm, table length: 1,000 mm, total length: 1,900 mm, total width: 3,400 mm, total height: 4,600 mm, overall weight: 26,000 kg, die cushion stroke: 300 mm, with 60-ton draw cushion Herblitz feed: Max. material width: 550 mm Max. material thickness: 6 mm Siemens control SPS7, 1500F Gusdsyv A Ipjpfx Al Ajd