Press line

Kallesoe LV7821

Condition: reconditioned (used), Totally renovated Log Haul Conveyor 8 Meters long Godjncft Ujpfx Abuebh

Condition: new, 3000 mm Working width 360 mm Wheel width 360 mm roll diameter 60 mm Gbjdpfx Asfv Attjbueh 900 kg height adjustment 650 - 1100 mm weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Gjdpjd H Sc Esfx Abuobh Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) Gjdpfx Ajrvh Tmsbusbh 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. We can also offer full electrical installation and assembly of line on site.

Condition: refurbished (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Godpfx Aon R Dihsbuebh Composition - LOADER - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Press platen dimensions 3000x1300 mm. Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. Gsdpfxjfg E Hlj Abusbh • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel Gjdpjcggy Ssfx Abusbh - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction Godpeh Ayyqofx Abuobh

Condition: good (used), Code: 0456 Brand: MEBER - ITALY Model: BEST 800 - CE Standard Industrial band saw with feeder for wood, semi-finished products, window frames , laminated timber, beams, boards, sawmills, carpentry and various - CE Standard Features: Sturdy construction Gbsdpfx Ajwn H Iwebueh Ergonomic position of the control panel board Integral blade guard Scrapers with brass blade for good cleaning of the flywheels Flywheel diameter mm 800 Table dimensions mm 1300 x 800 Cutting capacity: height x width mm 380 x 750 Blade width mm 80 Flywheel revolutions min 700 Blade length mm 5090 Motor power Hp 20 Feeder R1 : Fitted with a toothed drive roller and a support fence with idle rollers which can be positioned manually - Roller position is adjustable - Feed speed variator Roller height mm 235 Roller diameter mm 215 Max roller-blade distance mm 290 Max distance fence-blade mm 200 Fence dimensions: mm 490 x 290 x 260 Machine dimensions with mounted resaw mm 1200 x 1900 x 2500 h Total weight kg 1580

Condition: used, Holtec package cross-cut saw - hydraulic lowering of the saw blade - length measurement - hydraulic package ejection Gbsdpexzr Efofx Abuoh