Used Thk Hcr35A2Rr+60/800R for sale (21,193)

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Screw diameter: 60 mm, L/D = 30 Crjdjyrihgjpfx Aphod Grooved feed section Throughput: approx. 450 kg/h PE Motor (DC drive): 163 kW Screw speed: max. 221 rpm Tool zones: 5 pcs + 1 pc for adapter Melt pressure & temperature sensors included Control system: Cincinnati EXc Pro-NT Cylinder in bimetal design – condition: good Screw with wear-protection and hardened feed section – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Weight: 2,500 kg

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. Crjdpfjwc Afhjx Aphsd No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Csdpfjrfucfox Aphord Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer Cjdpfx Apoy H Aizohord • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Max. grinding width: 500 mm Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW Dimensions of magnetic clamping plates: 4 x 1,000 x 500 mm MACHINE DETAILS Weight: approx. 11 tons Crsdpfx Ajzd Rqljphod EQUIPMENT Including complete electrical system Permanent magnet plate Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, TECHNICAL DETAILS Number of upper units: 4 With NC positioning: yes Lateral horizontal units: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 With NC positioning: yes With NC "Z"-axis positioning: yes Codpfx Aszf Ibwephjrd Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With NC positioning: yes With NC "Z"-axis positioning: yes Spindles for horizontal drilling: 12 MACHINE DETAILS Control system: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Safety light barriers Automatic waste disposal system The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8649

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1,525 x 660 x 610mm, Table 1675 x 660mm, table load 2,000 kgs, Spindle speed 12,000 rpm, input 18Kw, Hurco Winmax 5Control, Spindle taper Din 40, 30 ATC, Coolant, Low volt light, Swarf Conveyor, spindle probe Crjdozh I Ebspfx Aphod

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: IC840722100 / IC200981, REF: MM6175 1 x Cattabriga Crem-O-Matic KEL 60 multifunctional batch pasteuriser. This machine produces dense, creamy, and smooth desserts batch after batch, ensuring optimal overrun and texture. It's built for durability and ease of cleaning. Typical products - custard, tempered chocolate, pastry creams, gelato mixes, etc. Technical specification ⚙️ ✅ Manufacturer - ICETEAM 1927 Cattabriga. ✅ Model - Crem-O-Matic KEL 60. ✅ Serial number - IC840722100 / IC200981. ✅ Year of manufacture - 2023. ✅ Batch size range - 26 litres to 52 litres. ✅ Average time per cycle - 120 minutes. ✅ Heating - Indirect. ✅ Power - 380-415 | V 5.5kW | 10A. ✅ Refrigerant - R-134A 1Kg. ✅ Dimensions - Width: 600 - 700 mm | Depth: 1000 - 1100 mm | Height: 1400 - 1500 mm ✅ Weight - 400 Kg (Appx). Typical applications 🍨 Codpfx Apow Hxhmjherd Artisan Gelaterias - The primary user, producing authentic Italian gelato with superior texture and flavour. High-End Restaurants & Hotels - For creating bespoke desserts and fresh ice creams in-house. Patisseries & Bakeries -  Expanding their dessert offerings with high-quality ice cream and sorbets. Specialty Food Producers - Manufacturing small to medium batches of premium ice cream or sorbet for retail or foodservice.

Condition: used, Year of construction: 2008, total length: 13,000 mm, total height: 2,100 mm, total width: 1,500 mm, Colour: Grey Empty weight: 1.000 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Serial number: 7240508 - Transport dimensions: 13000mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Credpfx Asypt Hbephed Tess van den Boom

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 08/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Credpfx Apsziw Tkehjd Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 8 mm Front right - 8 mm Middle left - 6 mm Middle right - 8 mm Rear left - 8 mm Rear right - 7 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,813 kg, axle configuration: 3 axles, first registration: 12/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Crodpfx Apoy Uc Dzjhsd Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 682 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 8 mm Front right - 8 mm Middle left - 9 mm Middle right - 9 mm Rear left - 11 mm Rear right - 12 mm

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: Csdpfjzizmuox Apherd - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) Crodpfxszizmns Aphjd For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone. Crsdpszizmbefx Aphed

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Cjdpjzizghsfx Aphord Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Cjdezizdyspfx Aphsrd Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), ABB IRB4600-60/2.05 Robot and IRC5 VELOPMENT OF GSG ROBOTICS Credpfx Asxq Tq Isphed GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2018, operating hours: 16,500 h, clamping force: 600 kN, screw diameter: 20 mm, displacement volume: 31 cm³, injection pressure: 1,470 bar, Injection molding machine ENGEL Victory 60-28 Tech Stock No.: 503700 Manufacturer: ENGEL Type: Victory 60-28 Tech Control system: CC300 Crsdpeziz Edsfx Aphsd Year of manufacture: 2018 Operating hours: 16500 h Technical data, clamping unit Clamping force: 280 kN Platen size h x v: 500 x 450 mm Minimum mold thickness: 150 mm Maximum mold thickness: 550 mm Opening stroke: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Mold weight: 450 kg Technical data, injection unit Screw diameter: 20 mm Injection volume: 31 ccm Injection pressure: 1470 bar Screw length: 24 l/d Screw stroke: 100 mm Screw speed: 360 rpm Free injection flow rate: 78 g/s PS Number of heating zones: 4 Nozzle stroke: 230 mm Dimensions & Weight Machine dimensions L x W x H: 3.4m x 1.3m x 1.8m Total weight: 2900 kg Equipment Screen display in German Screen display in English Screen display in Polish Hydraulic core pull, 1x Air valve, 1x Screw with high wear resistance and corrosion resistance Interface for color dosing system

Condition: used, Year of construction: 2022, Manufacturer: NOMA-Nowicki Model: Typhoon KN-60 Year: 2022 Condition: Used Serial Number: 52022220 Stock Number: 3374 Bowl: 60 litres Bowl speed: variable speed, 2 - 15 RPM Knives: variable speed, 200 - 6000 RPM Mixing: 2 reverse mixing speeds Power: 3 x 400V, 50Hz, 21kW Dimensions: 1100 x 1600 x 1200 mm Cedoy Th Uispfx Aphjrd Weight: 1325 kg

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Cjdpfxezimgas Apherd Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm Cjdpfxszima Hj Aphord External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Codpfxezii A Rs Aphord Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,798 h, load capacity: 4,000 kg, lifting height: 4,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 3,150 mm, battery capacity: 870 Ah, remaining battery capacity: 82 %, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 2,400 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following specifications: Lifting capacity: 4,000 kg Lifting height: 4,450 mm Overall height: 3,150 mm Year of manufacture: 2010 Operating hours: 8,798 STILL 4.0-ton electric forklift with full cabin and heating, battery at 82%, good tires (new rear tires), telescopic mast for clear visibility, side shift, 4th valve, lighting compliant with StVZO (German Road Traffic Regulations), fork length 2,400 mm (other fork lengths available upon request), charger. Additional attachments such as fork positioners, rotating devices, etc., available upon request. Crodpfx Apszivgcehsd Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial enterprises; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-bed trailer (transport costs upon request). You can find more information about us and other offers on our newly designed website!

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,856 h, load capacity: 5,000 kg, lifting height: 3,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 2,550 mm, battery capacity: 930 Ah, remaining battery capacity: 84 %, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-50 electric forklift with the following specifications: * Lifting capacity: 5,000 kg * Lifting height: 3,450 mm * Overall height: 2,550 mm * Year of manufacture: 2018 * Operating hours: 7,856 Still 5.0-ton electric forklift, very good battery, good tires (rear tires new), telescopic mast with clear view, side shifter, fork positioner, lighting compliant with StVZO regulations, fork length 1,200 mm, charger Crjdpfxszivfxe Aphed Price ex works, including 1,000 hours of service according to Still manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively using our own ramp-type low-bed trailer (transport costs on request). Further information and offers can be found on our newly designed website!

Condition: excellent (used), Zwick / Roell Zwick Indentec Hardness Tester Type: 4150DLC-A Technical Specifications: Available test forces: 60, 100, and 150 kgf Codpfozh D Rasx Apherd Power supply: 115 / 230 V (50 - 60 Hz) 2/1A 1L/N/PE + EO-4010C camera and ueye software Condition: used Weight: approx. 60 kg Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.