Used Blow moulding machinery for sale (32)

Condition: ready for operation (used), Year of construction: 2015, Control Unit Model Blow Control Injection Unit Screw diameter 120 mm Clamping Unit Clamping force 1400 kN Opening stroke 1000 mm Dq8Zyl Max open daylight 1800 mm Mould height min 2x 400 mm This EXTRAPLAST 140to Blow Moulding machine was manufactured in the year 2015. It is equipped with a it-AUTEC Blow Control. The machine has a clamping force of 1400 kN. See tech specs details in attached PDF (German). Application Types Blow Moulding

Year of construction: 1994, Condition: excellent (used), WITH BOOTLE TESTING ANY MANY PERIPHERALS Dlpflh

Condition: ready for operation (used), Year of construction: 2008, A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible. Dpei8V

Condition: good (used), Year of construction: 1990, Battenfeld-Fischer VK 1-1 Blower Number of heads: 2 Center distance: 100 mm Maximum container volume: 0.5 l Number of stations: 1 Continuous Extrusion Number of extruders: 1 Screw diameter: 60 mm L/D ratio: 20 Parison thickness control: PROFILOG 32 points Center distance: 100 mm Hot knife Automatic coring Voltage: 380 V Triphase Frequency: 50 Hz Blower: Dimensions (L x W x H): 4.60 m x 1.50 m x 2.60 m Weight: 5000 kg Cabinet: 0Iu3Wthwo Dimensions (L x W x H): 0.85 m x 1.10 m x 2.40 m Weight: 400 kg

Condition: good (used), Year of construction: 2017, Functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP Bijabhqrmbo 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. High Pressure compressor - KAESER Booster N 753 - G 13 bar / 40 bar" 4. Air Dryer 5. Receiver tank - Low pressure - MAX 16Bar 6. Receiver tank - High pressure - MAX 45Bar

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 Year of manufacture 1998 Capacity: up to 19,000 bph for 0.5 L bottles and 16,000 for 1.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit E2Psyh3 Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. B3C0Mhhhg Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1987, Condition: excellent (used), DOUBLE POSTE 2 HEAD 3 LAYER SYSTEME TEST BOTTLE 2 CONVOYOR MOOG 64 POINTS AND PERIPHERALS Dlpfmf

Condition: like new (used), Functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Lp8Berc Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Year of construction: 2011, Condition: excellent (used), INJECTION MACHINE - PROCREA BLOWING Bfwjib2V8Vz TYPE Rev 300 This PROCREA REV 300 injection blow molding machine can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 50 cc. at 15 liters and weight of 20 gr. at 700 gr. This machine is predisposed to work with molds of 1 to 8 cavities and the production is very high thanks to the revolver system which carries out all the operations of injection, blowing and ejection of the finished part in a single stage. The construction of molds for the Rev 300 is very simple thanks to the automatic extraction system applied to the revolver.

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: P241102063, screw diameter: 80 mm, overall weight: 7,000 kg, total width: 4,170 mm, total length: 2,250 mm, total height: 2,900 mm, power: 75 kW (101.97 HP), TONGDA HTS 12L Plastic Blow Molding Machine 9Nxlpmdc8 Brand new TONGDA extrusion blow molding machine, only tested with the 2 molds and adjusted.

Condition: excellent (used), Year of construction: 2003, Bottle blowing machine "PET" Manufacturer: KRONES Dqo2Qr Model: CONTIFORM K781 Capacity: 12,000 bph Year of production: 2003 Technical documentation Very good condition

Condition: good (used), Year of construction: 2015, Press for the production of plastic bottles up to 0.5 L by blowing Made in Germany in 2015 machine is not under power, is in stock Injection Unit - electric srew drive \- Injection unit accrding to EUROMAP 260 \- Screw dia 40 mm \- Injection pressure 1500 bar \- L/D ratio of screw 25 \- Cylindar head Bkz3Iy2Mqin volume 176 cm3 \- Max shot weight in HDPE 140 g \- Injection speed 201 cm3/s Clamping Unit \- clamping force injection station 400 KN \- Clamping force blow station 60 kN \- Mould opening force 100 kN \- Mould opening stroke 280 mm \- Minimum mould height 254 mm \- Stroke of rotary table 80 mm \- Max rotary dia 890 mm \- Core rod holder lenght 400 mm \- Push bar lenght 370 mm \- Daylight between columns 571x571 mm \- Area of optimum clamping pressure 200x200 mm General data \- Installed electric total rating 37 kW \- Electric consuption total 6,6 kW/hour \- Weight 9500 kg (Machine 8900 kg + compressor and airman) \- Control Phoenix Contact General purpose srew suitable for proceccing PET, PP, PE, PC, PS, SAN

Condition: good (used), Year of construction: 1990, Functionality: fully functional, screw diameter: 100 mm, clamping force: 80 kN, power: 0.1 kW (0.14 HP), Year 1990 retrofitted in 2006 Shelf dimensions: 1800 x 1200 mm Distance between columns: 1400 x 800 mm Power: 100 KW Closing force : 80Tonnes Mold height: min: 500 - max: 1100 mm Mold width: max. 950 mm Bolskby2Ghs Mould thickness: min: 800 - max: 1200 mm Tray opening: 2000 mm Die diameter: min. 150 mm - max. 350 mm Hydraulic servo-control: 6 spool valves Pneumatic drive: 17 spool valves Extruder screw diameter: 100 mm - 23D Material throughput: 360 kg/hour Gob regulation: Moog Number of points: 400 Blow rods: low position Accumulation weight: 8 kg HDPE

Condition: reconditioned (used), Year of construction: 2012, SB 3000.5E linear blow molding machine, including: New modular heating system, Preform feeder, easy and quick mold change system, electric stretching system, touch screen panel, smooth performance adjustment, cracked bottle elimination function Dpkyu7 Single-nest machine prepared for blowing 5-liter bottles. The machine after a major renovation at Dynaplast, all operating components were replaced and the drive of the bottle ejection basket was changed, instead of the angular gear, a belt transmission with a servo drive was used, which allows for smoother operation of the component. The preform is also stretched using a belt transmission and driven by a servo drive, which allows for smooth speed adjustment from the operator panel, (we can smoothly adjust the speed of the stretching rods) The price given is for the machine without the mold visible in the photos, it is possible to resell the visible 5L mold

Condition: good (used), Year of construction: 1994, PET Blow Moulding Machine - MAG PLASTIC The ideal blowing solution for PET bottles Year : 1994 Type : SSB 40 Input voltage : three-phase 400 V Frequency : 50 or 60 Hz ± 5% Total installed power : 86 kW (Option 102 kW) Weight: Approximately 5000 kg Number of molds: 4 Clamping force : 250 KN Total opening stroke : 120 mm Gpvo3Ncu2

Condition: excellent (used), Year of construction: 2013, operating hours: 600 h, Functionality: fully functional, screw diameter: 65 mm, overall weight: 9,000 kg, clamping force: 785 kN, total width: 1,800 mm, total length: 4,500 mm, total height: 3,000 mm, power: 0.045 kW (0.06 HP), We offer for sale slightly used Injection Blow molding machine with perfect condition. Q2Xicqxgev It was designed for PMMA or PC resins to produce lamp shades and canisters for liquids.

Condition: used, Semi-automatic PET bottle blowing machine Cxe0Wkmxy3 Manufacturer: FERENC Type: F-1400 Manufacture date: 2006 Capacity: about 800 pcs / h Number of molds in the machine: 2 Furnace dimensions: - length: 900 mm - width: 900 mm - height: 1200 mm Blower dimensions: - length: 1800 mm - width: 750 mm - height: 2000 mm Weight of the set: 1200 kg Technical condition: used machine

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 114, For sale new, two-nest blower. PP28-PP32 100ml -2L bottle size. 1000-2000 pcs/hour. Guaranteed. Pg2Cgcmq09

Condition: good (used), Functionality: fully functional, Year of construction: 1999, BLOW MOLDING ST TA 180 Tonnage: 180T Screw diameter: 120 mm L/D ratio: 28 Max PE extrudable weight: 19000gr Max. injectable volume: 25 liters Bojc8E3Hjtk Number of goblets: 100 Die diameter min/max: 190/450 Platen dimensions 1020 x 1600 mm Max. mold height: 2000 mm Min. mold thickness: 840 mm Max. mold opening stroke: 895 mm

Condition: reconditioned (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: SB 8015, SB 8000 linear blow molding machine, serial number 8015, year of production 2006 with a nominal capacity of 7200 bph (approx. 6000 bph with a 2.0l bottle), Machine after general renovation, in very good technical condition, all operating components replaced. The machine set includes: Dpkw2N Preform feeder, easy and quick mold change system, electric stretching system, mechanical lifting system, powered by electric motors for a closing system with pressure compensation, 6-inch touch panel, smooth regulation of capacity in the range of 5000-7400 bph, function of eliminating deformed molds and cracked bottles. The machine is adapted to the PCO 1810 preform, it is possible to retool the machine for another preform. The machine is sold without blow molds, we can make molds according to the customer's design adapted to our machine.

Condition: excellent (used), operating hours: 34,000 h, KAUTEX BLOW MOLDING MACHINE reference KCC30 in good condition Year of manufacture : 2011 Working hours : 34 000 hours Type Single-station machine Type of raw material : HDPE, PP Robot KAUTEX Clamping force : 300 KN Screw diameter 90 mm Cgxrihofss Accumulator head capacity (HDPE) : 4 kg Clamping plate : width 530 mm Clamping plate : length 700 mm Distance between plates : 1000 mm Tool width max : 710 mm Tool thickness max : 2 x 250 mm Tool height max : 700 mm Tool weight max : 2 x 700 kg Dimensions of largest tool used in production : 870 x 650 x 765 mm Control system : Blow command Extruder type : E 90 Extrusion head Vertical hose head of a hydraulic accumulator Bottle volume Max : 30 L Diameter of die-a tool min-max : 90-220 mm Diameter of die-a tools currently used in production : 90, 150, 170, 190, 220 mm Max working pressure of the machine :220 bar Air consumption : 95 m3/h Air pressure : 6-10 bar Installed heating power : 20 kW Number of temperature zones : 5

Condition: excellent (used), Year of construction: 2012, operating hours: 33,000 h, KAUTEX BLOW MOLDING MACHINE reference KCC30 in good condition Year of manufacture : 2012 Working hours : 33000 hours Type Single-station machine Type of raw material : HDPE, PP Robot KAUTEX Clamping force : 300 KN Screw diameter 90 mm Accumulator head capacity (HDPE) : 4 kg Clamping plate : width 530 mm Clamping plate : length 700 mm 98X7Nah Distance between plates : 1000 mm Tool width max : 710 mm Tool thickness max : 2 x 250 mm Tool height max : 700 mm Tool weight max : 2 x 700 kg Dimensions of largest tool used in production : 870 x 650 x 765 mm Control system : Blow command Extruder type : E 90 Extrusion head Vertical hose head of a hydraulic accumulator Bottle volume Max : 30 L Diameter of die-a tool min-max : 90-220 mm Diameter of die-a tools currently used in production : 90, 150, 170, 190, 220 mm Max working pressure of the machine :220 bar Air consumption : 95 m3/h Air pressure : 6-10 bar Installed heating power : 20 kW Number of temperature zones : 5

Year of construction: 1998, Condition: excellent (used), ST blow molding machine – Reference TA60 Year 1998 Tonnage: 60 tons Platen dimension: 960 x 800 mm Mini / maxi tray opening: 600 x 1300 mm Max mold opening stroke: 700 mm Platform vertical travel: 300 Screw diameter: 120 mm with mixer tip L/D ratio: 24 Maximum extrusion capacity in PE: 350 kg/h Accumulation capacity: 8 liters 99U2G2Spma Maximum accumulation weight: 6.1 kg Machine dimensions: 8400mm x 5100mm x 6000mm Extruder motor retrofit done in 2023 High pressure pump replacement in 2021 Replacement pump variation done in 2020 Closing and synchronization reconditioned in 2018 Machine in very good general condition sold with an additional 12 liter head

Year of construction: 1990, Condition: good (used), Souffleuse Battenfeld-Fischer VK 1-1 2 head Entraxe :100 mm Volume max of the bottle : 0,5 l Number of post: 1 Extrusion continuous Nombre d'extrudeuses: 1 Screw diameter : 60 mm Rapport L/D: 20 Cwhjpnvkzf Parison thickness control : PROFILOG 32 point Heating knife Décarottage automatique Voltage : 380 V Triphase Frequency : 50 Hz Blow mouding machine Dimensions (L x W x H): 4.60m x 1.50m x 2.60m Weight: 5000 kg Cabinet Dimensions (L x W x H): 0.85m x 1.10m x 2.40m Weight: 400kg