Used Almig Alm-Ac 2900 for sale (11,505)

Condition: good (used), Year of construction: 2023, operating hours: 159 h, Used, oil-free, variable 55 kW screw compressor Immediately available! (Subject to prior sale!) ALMIG LENTO 55 WK (water-cooled) with Air Control Premium controller The compressor is in very good condition and has only run for 157 hours so far. Year of manufacture: 2023 Operating hours: 157 h Technical data Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min Gujdpfxsxud Eqj Ag Toh at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: new, Year of construction: 2025, operating hours: 1 h, Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) include dryer include time drain include 2 filters include 270 liter tank galvanized Year 2025 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 8 270 RD Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.00 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 63 dB (A) Length: 1320 mm Guodsx Rb D Sjpfx Ag Toh Width: 695 mm Height: 1898 mm Weight: 447 kg Compressed air connection: G 3/4 "

Condition: excellent (used), Year of construction: 2021, operating hours: 40,000 h, functionality: fully functional, Compressor in very good condition. In 2023, the compressor screw was replaced. The compressor is still operational and its functionality can be verified. The machine has been fully serviced by the supplier. Gsdpfx Aoy N Dv Uog Tjuh

Condition: good (used), Year of construction: 2018, ALMIG Variable 90 screw compressor, no. S0050145, year of manufacture 2018, 100 kW Gedjunwf Dspfx Ag Touh

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1131578, SPECIFICATION Trunnion table size 630mm x 500mm X axis traverse 762mm Y axis traverse 508mm Z axis traverse 508mm B axis tilt +110 deg -35 deg C axis rotation 360 degree Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate X, Y, Z axis 30.5/min Gedpezr Nf Dsfx Ag Tjuh Rapid feed rate B, C axis 150 degrees a second Toolchanger capacity 40 + 1 Tools Approx. weight 8900kg   MACHINE EQUIPPED WITH: - Haas CNC Control System Through Spindle Coolant, with Auxiliary Filtration Swarf Conveyor Renishaw Wireless Intuitive Probing System High Speed Machining Lighting Enclosed Guarding

Condition: new, Year of construction: 2023, machine/vehicle number: H2200058, power: 4 kW (5.44 HP), pressure (min.): 10 bar, new piston compressor available immediately: ALMIG HLA-10-10-270 (10 bar) with 270 liter compressed air tank with star delta connection Year: 2022 Hours: 0 h Gusdpfxozb E A Eo Ag Teh 3 cylinders Pressure: 10 bar Rated power: 7.5 kW Delivery quantity at 7 bar: 801 l / min Compressed air outlet: 3/4 " Dimensions length x width x height: 1580 x 1311 x 657 mm Weight: 324 kg Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: excellent (used), Year of construction: 2017, Hurco VMX30i vertical machining center Year: 2017 Technical details: X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table size 1020x510 mm Table load 1000 kg Spindle nose SK40 Spindle speed up to 12000 rpm Tool magazine 30 positions Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Rapid traverse rate in X/Y/Z : 35/35/30 m/min Weight 4800 kgs Accessories/options: - With linear scales on all axis, with higher accuracy standard - Through spindle coolant - Chip conveyor - Cooling System - Spindle Cooling - Software options as per on the pictures Gjdpfozf Rxfex Ag Touh Under power in our warehouse. Clamping units, vices, and dust extractor are not the scope of the delivery.

Condition: new, Year of construction: 2025, operating hours: 1 h, power: 132 kW (179.47 HP), pressure (max.): 13 bar, New variable screwcompressor ALMIG Variable XP 132 (air cooled) Controller: Aircontrol Premium Year 2025 Hours: 1 h new condition, available short.(4 weeks) Technical specifications: type: Variable XP 132 Possible operating pressures of the system: 5 to 13 bar Quantity delivered at 5 bar : 9.63 to 32.03 m³/min at 6 bar : 9.80 to 28.40  m³/min at 7 bar : 9.92 to 25.20 m³/min at 8 bar : 9.65 to 23.20 m³/min at 9 bar : 9.61 to 21.41 m³/min at 10 bar : 9.56 to 21.00 m³/min at 11 bar : 9.50 to 20.23 m³/min at 12 bar : 9.43 to 18.31 m³/min at 13 bar : 9.37 to 17.38 m³/min Installed power: 132 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Sound pressure level (DIN 45635 T13) : 75 dB (A) Gujdpfx Asy Tm Rveg Teh Compressed air connection: flange DN 80 Dimensions and weight Length : 2940 mm Width : 1710 mm Height : 1725 mm Weight : 3540 kg Visit our store. We´ve got a lot of compressors and dryers on stock.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 016-018828-450, SPECIFICATION Table 914mm x 500mm X axis traverse 830mm Gujdpjxzqq Tefx Ag Toh Y axis traverse 530mm Z axis traverse 580mm Spindle nose to table 115-695mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 22.4kW Rapid feed rate 30m/min Toolchanger capacity 30 tools Approximate weight 5800Kg   MACHINE EQUIPPED WITH: - Siemens 828D CNC Control Renishaw probe 15 0ff BT40 toolholders Coolant system Lighting Guarding

Condition: excellent (used), Year of construction: 2017, operating hours: 10,846 h, functionality: fully functional, power: 28 kW (38.07 HP), volume flow: 254.4 m³/h, pressure (max.): 13 bar, type of cooling: air, Screw compressor, Variable28 Inverter integrated. 28 kW 13 bar 4.24 m3/min Gusdpfx Ageznuf Uo Teh Year of manufacture: 2017 Operating hours: 41,635

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp Gjdpfx Agjzu Ni Uj Touh 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, Immediately available: new variable screw compressor ALMIG F-DRIVE 22 (5 to 13 bar) Cotroller: Aircontrol Premium Year of construction: 2024 Operating hours: 2 Bh Technical specifications Type: F-Drive 22 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.44 / 4.14 m³ / min at 6 bar (g): 0.43 / 4.12 m³ / min at 7 bar (g): 0.42 / 4.11 m³ / min at 8 bar (g): 0.50 / 3.89 m³ / min at 9 bar (g): 0.58 / 3.66 m³ / min at 10 bar (g): 0.67 / 3.47 m³ / min at 11 bar (g): 0.75 / 3.26 m³ / min at 12 bar (g): 0.85 / 3.02 m³ / min at 13 bar (g): 0.94 / 2.79 m³ / min Nominal power drive motor: 22 kW Degree of protection / insulation class drive motor: IP 55 / ISO F Operating voltage / frequency: 400/50/3 V / Hz / ~ Sound pressure level (DIN 45635 part 13): 70 dB(A) Compressed air connection: 1“ G Length: 790 mm Width: 800 mm Height: 1757 mm Weight: 356 kg Visit our store. Gujdpfx Agetpw I Hj Tsh We always have a large selection of new and used compressors in stock! Available immediately.

Condition: reconditioned (used), QUASER MV204 CNC Vertical Machining Centre Year 2016 Control FANUC 31i-B Gjdpfx Aszzymkeg Teuh Table size 700 x 1400 mm Table load 1800 kg Travels XYZ 1270 x 700 x 610 mm Spindle nose to table 150 - 750 mm Spindle speeds to 12000 rpm Spindle taper BT 40 Spindle motor TBC Number of tools 30 ATC Rapid traverse X, Y, Z 36 m/min Weight 10100 kg Supplied with: Swarf Conveyor, Spindle Chiller, Filtermist FX7002, Tooling Package. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27001 Machine Serial Number: 113L160588 Cost: £34,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2016, operating hours: 6,210 h, condition: like new (used), machine/vehicle number: MA0084_S0040858, used ALMIG FLEX 7 variable screw compressor with dryer Year: 2016 Hours: 6210 h (new service by 6210 hours) The compressor is on stock, available immediately. type: FLEX 7 effective volume flow min/max (acc. to ISO 1217 / Annex C) 5 bar: 0,55 - 1,32 m³/min 6 bar: 0,54 - 1,25 m³/min 8 bar: 0,53 - 1,11 m³/min Gjdsglz U Dopfx Ag Touh 10 bar: 0,52 - 0,97 m³/min 13 bar: 0,52 - 0,76 m³/min compressed air outlet: G 3/4" dimensions ( l x w x h ) 870 x 590 x 990 mm weight: 165 kg Visit our store ! We have a lot of new and used compressors on stock !

Condition: as good as new (ex-display), Year of construction: 2022, New speed controlled ALMIG LENTO 22 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control P Technical specifications Type: LENTO 22 LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 3,67 m³/min at 6 bar min/max : 1,00 to 3,46 m³/min at 7 bar min/max : 0,97 to 3,29 m³/min at 8 bar min/max : 0,93 to 3,06 m³/min at 9 bar min/max : 0,90 to 2,82 m³/min Gedpfxjh Unprs Ag Teuh at10 bar min/max : 0,87 to 2,58 m³/min elektric motor power: 22 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 67 dB (A) 100% load: 69 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 910 kg Compressed air connection: G 1 inch

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Gedpfx Aot Dmlfeg Touh Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Year of construction: 2020, operating hours: 14,099 h, condition: excellent (used), machine/vehicle number: S0055742, used ALMIG Belt XP 22 - (8 bar) oil-injected screw compressor with integrated heat recovery with Aircontrol Premium controller Operating hours: 14099 Bh Pressure: 8 bar Guedpfoix Aiyox Ag Tsh Rated power: 22 kW Delivery quantity: 3.70 m³ / min Sound level: 74 dB (A) Compressed air outlet: G 1 " Dimensions length x width x height: 1250 x 880 x 1515 mm Weight: 681 kg Visit our store we have a lot of used and new compressors on stock.

Condition: excellent (used), Hurco VMX50i (2014) 3-Axis Vertical Machining Centre Guedpfx Ageyx H Rte Tjh Control: Hurco WinMax Travels & Capacity X Axis Travel: 1270 mm Y Axis Travel: 660 mm Z Axis Travel: 610 mm Table Size: 1500 x 660 mm Max Table Load: 2000 kg

Condition: excellent (used), Year of construction: 2011, volume flow: 3.55 m³/h, operating pressure: 10 bar, pressure: 13 bar, ALMIG VARIABLE 20 screw compressor Variable speed (inverter-controlled) 20 kW motor Capacity: 3.55 m3/min Pressure: 13 bar Gjdpfsy Uwftex Ag Touh Year of manufacture: 2011

Year of construction: 2020, operating hours: 9,045 h, condition: excellent (used), machine/vehicle number: MA0157_S0058169, variable screw compressor ALMIG F-DRIVE 11 (5 to 13 bar) Cotroller: Aircontrol Premium Year of construction: 2022 Operating hours: 9045 Bh Technical specifications Type: F-Drive 11 Possible operating pressures of the system Gjdpfxsihf Epj Ag Touh (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.16 / 1.95 m³ / min at 6 bar (g): 0.20 / 1.94 m³ / min at 7 bar (g): 0.23 / 1.84 m³ / min at 8 bar (g): 0.25 / 1.75 m³ / min at 9 bar (g): 0.26 / 1.67 m³ / min at 10 bar (g): 0.29 / 1.57 m³ / min at 11 bar (g): 0.30 / 1.48 m³ / min at 12 bar (g): 0.32 / 1.38 m³ / min at 13 bar (g): 0.37 / 1.27 m³ / min Nominal power drive motor: 11 kW Degree of protection / insulation class drive motor: IP 55 / ISO F Operating voltage / frequency: 400/50/3 V / Hz / ~ Sound pressure level (DIN 45635 part 13): 70 dB(A) Compressed air connection: 3/4“ G Length: 660 mm Width: 690 mm Height: 1586 mm Weight: 356 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: excellent (used), Year of construction: 2009, operating hours: 3,262 h, functionality: fully functional, machine/vehicle number: 1072682, overall weight: 6,000 kg, HAAS VF-3SSHE CNC vertical machining center, manufactured in January 2009, available for sale. Condition: Excellent condition, fully operational, all inspections / services done. Guedpjz Ag Nusfx Ag Teh Visible features and equipment: • Inline direct-drive spindle • Maximum spindle speed: 12,000 rpm • High-speed tool changer • Through-spindle coolant (TSC) • Electrical supply: 360–480 V, three-phase, 50/60 Hz • HAAS CNC control Recorded operating hours: • Power On Time: 3,262 h 57 min • Cycle Start Time: 1,251 h 29 min • Feed Cutting Time: 1,103 h 02 min • M30 cycle count: 5,815 h The machine can be inspected in Baia Mare, Romania. Price: 38.500 EURO Price does not include tools and spare parts.

Condition: good (used), Year of construction: 2008, operating hours: 45,000 h, Used, oil-free, variable 55 kW screw compressor ALMIG LENTO 55 WK (water-cooled) The compressor is in good, neat condition. Year of construction: 2008 Operating hours: 45,000 operating hours Technical specifications Type: LENTO 55 WK Possible operating pressures of the system (continuously adjustable): 5 - 10 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C: at 5 bar min / max: 1.41 / 7.79 m³ / min at 6 bar min / max: 1.40 / 7.74 ​​m³ / min at 7 bar min / max: 1.39 / 7.69 m³ / min at 8 bar min / max: 1.38 / 7.64 m³ / min at 9 bar min / max: 1.37 / 7.59 m³ / min at 10 bar min / max: 1.35 / 7.29 m³ / min Rated power drive motor: 55 kW Degree of protection / insulation class of drive motor: IE 3 Protection / insulation class fan motor: IP 54 / H Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ Cooling water requirement at 100% load (with inlet + 15 ° / delta t = 15 K): 55 l / min Cooling water supply (min / max): 5/35 ° C Cooling water outlet (max): 45 ° C Cooling water pressure (min / max): 4/10 bar Cooling water volume (min / max): 140 l / min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point refrigeration dryer 50% load: 3 ° C 100% load: 3 ° C Sound pressure level (DIN 45635 part 13) soundproofed, at 50% load: 64 dB (A) 100% load: 73 dB (A) Length: 2,300 mm Width: 1,400 mm Gedpfxegkbfho Ag Touh Height: 1,560 mm Weight: 1,590 kg Compressed air connection: G 1 1/2 inches Visit our shop, we always have a large number of new and used compressors in stock.

Year of construction: 2005, condition: excellent (used), ALUP ALMIG 40Kw Wave Compressor!!! Screw compressor ALUP ALLEGRO 40 machine with inverter after service Technical data: capacity: 5.05 m3/min; Gusdpomx Rucjfx Ag Toh 40KW motor; pressure max. 13bar; year;2005 mileage;15061h; Compressor fully operational,warranty, net price: 17500zł gross price: 21525zł

Condition: excellent (used), Year of construction: 2011, SCREW COMPRESSOR ALUP ALMIG 115Kw INVERTER 11r Guedpjthdabofx Ag Tjh Screw compressor ALMIG VARIABLE 115 machine with inverter and heat exchanger after service Technical data: capacity: 3.67-19.48 m3/min; engine 115KW; max. pressure 13bar; year;2011 mileage;18624h; compressor fully functional, warranty,

Year of construction: 2022, operating hours: 11 h, condition: as good as new (ex-display), Screw compressor ALMIG BELT XP 6- 10 bar (air cooled) Controller: Aircontrol B Year 2022 / IMMEDIATELY AVAILABLE! Hours: 11 Technical specifications Type: BELT XP 6 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 0.68 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 5,5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 67 dB (A) Length: 750 mm Width: 600 mm Height: 955 mm Weight: 217 kg Gusdpfx Agog Tdv Aj Tjh Compressed air connection: G 1/2 "