Used Blm-Group 3D Cnc-Wire Former for sale (16,909)

Condition: used, Year of construction: 2007, operating hours: 21,999 h, turning length: 170 mm, turning diameter: 140 mm, spindle speed (max.): 8,000 rpm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Turning diameter: 42 / 140 mm Turning length: 170 mm Spindle speed: 80–8,000 rpm C-axis: 0.001° Dsdpjz Ia Rgsfx Al Sewc Number of turrets: 2 Tool positions per turret: 12 Tool holder: VDI 20 Spindle speed for driven tools: 45–4,500 rpm Sub-spindle distance: 42 mm Spindle power: 1 kW Spindle speed: 60–6,000 rpm C-axis: 0.001° MACHINE DETAILS Control system: Mitsubishi Meldas Number of controlled axes: 8 Simultaneously machinable axes: 7 Collet chuck: 48 DIN 6343 Dimensions & Weight Footprint: approx. 2.4 × 1.6 × 2.2 m Machine weight: approx. 3.3 t Operating hours: 21,999 h EQUIPMENT Various tool holders, see images 5 axial driven tool holders Collet chuck for pressure collets, type 173E 15 pressure collets, type 173E Additional coolant cooler Chip conveyor Knoll, year of manufacture 2018 Simultaneous operation with 7 axes on main and sub-spindle Note: Complete battery replacement on 22.12.2025

Condition: used, machine/vehicle number: 008507, X axis working area: 5020 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Dwodezvwnbopfx Al Sec Number of controlled axes: 3 axes Total number of tool changer positions: 16

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 950 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 2 rpm, travel distance Z-axis: 4,000 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret Dwedpfx Aszzq Sqol Sec 2 x Fixed Steadies

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Dodpfxsx Aqi Es Al Sowc Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: used, Year of construction: 2002, I.MA.L. GROUP TYPE: 105/33 SHEET METAL LENGTH: 3300 mm CAPACITY: 105 tons Dwsdpfszky E Sjx Al Sec MADE IN ITALY

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 8046723D038, spindle motor power: 11,000 W, turning diameter over cross slide: 380 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,000 kg, type of input current: three-phase, total width: 1,800 mm, total length: 2,500 mm, total height: 1,800 mm, torque: 373 Nm, Equipment: documentation/manual, CNC LATHE STYLE 350 [850 dbc] - main spindle motor power 11kW - main spindle bore Ø54 mm, 3,000 rpm - manual universal with 3 jaws D200mm - VDI30 turret with 8 positions - Coolant gun, including high-pressure pump - Work area lighting (LED) - Cooling system Dsdjvvwblopfx Al Sswc - Automatic lubrication - Ball screw protection - Full fairing with sliding doors - Speed potentiometer - Coolant control button - Handwheel - Remote support on machine – allows remote diagnostics

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: N1A665853, tool weight: 30,000 g, input voltage: 400 V, Machining center Rumba -4 axes Dsdpfjwgm Ibsx Al Sowc Machining length 4000 mm Ppsbtxbqohywz So H Ijr CNC controlled machining center with vertical machining spindle, suitable for machining extruded aluminum profiles, light metals, PVC and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4Kw, 18000 rpm electrospindle, controlled by an inverter and a quick tool changer (tool changer) with an ISO30 spindle. Interpolation of the X, Y, Z and W axes controlled numerically. Brushless motors for positioning the X, Y, Z and W axes. Complete with 4 pneumatic double clamps, tool diameter correction by software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touch screen with simplified Windows-based graphics, Teamviewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to edit longer parts. Standard equipment: 4kw ISO30 electrospindle 4 pneumatic clamps (manually adjustable) Safety cover Automatic tool changer (10 tools) 4x ISO30 cone included with the tool 3x chip collection compartments air nozzle Technical data: X-axis stroke 3000 mm / 4000 mm Y-axis stroke 400 mm Z-axis stroke 300 mm Rapid traverse (X, Y, Z): 50 m/1' Acceleration (X, Y, Z): 1.5 m/s2 Electric spindle: 6.6 kW HSK63 Spindle cooling: Air, liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (blade) Working pressure: 7bar Weight: 2500kg

Condition: used, Year of construction: 2022, machine/vehicle number: 15084, functionality: fully functional, cutting width (max.): 420 mm, empty load weight: 3,100 kg, cutting length (max.): 200 mm, saw blade length: 5,500 mm, motor model: IE3, Equipment: documentation/manual, SECOND-HAND TS 400 THIN CUTTING HORIZONTAL BANDSAW CE RULES TECHNICAL DATA: SPECIAL DEVICE "OFFSET": DEVICE "DOUBLE SPEED": - Max. cutting capacity 420x200 mm - Distance from blade to conveyor 2-150mm - Min. cutting thickness from the top 0.75 mm - Saw wheel diam. 800 mm. - Saw wheel thickness 50 mm Dwedpfeyam U Tsx Al Sjc - Sawblade length 5500 mm. - Sawblade width 50 mm. - Sawblade speed 17-34 m/s - Conveyor belt size 400x4200mm - Oil mist cooling system - High accuracy hydraulic blade tension system (2500 kg) - Variable feed speed 0-25 m/min - Feed motor 2HP with inverter - Main motor 30 HP with inverter - Blade lift motor 2 HP - Dust hood outlet diam. 125 mm x 2 - Machine net weight Kg. 3100 - Air loaded pressure roller - Slow cutting start function - Spraying jets for blade lubrication - Motor IE3 INCLUDED - S/N 15084 - Year 2022

Condition: reconditioned (used), Year of construction: 2006, BACCIOTTINI Group Pit Stop AF Speed, year 2006: automatic creasing and perforating machine in excellent condition. The machine will be overhauled at Bacciottini Group srl's facilities. Robust construction and reliable performance. The machine is equipped with a NEW standard V-Shape creasing kit and a 100 cm extension. All other optional tools currently available can be added: digital creasing kit, standard perforating kit (2/1, 3/1, 4/1), or micro-perforation kit. Technical specifications: - Maximum format: 50 x 70 cm (50 x 100 cm with extension) - Minimum format: 8 x 15 cm - Paper weight: from 80 to 600 gsm - Minimum creasing distance: 0.1 mm - Programming: 200 programs with 100 creases per program Dwodpfx Aloyk Utxj Ssc - Power supply: 400 Volt three-phase 50 Hz - Power requirement: 3.5 kW This has been our best-selling model for years and continues to be appreciated worldwide for its quality and reliability. The attached photos are from our catalogue and do not specifically refer to the machine being offered.

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; Dwsdpfxottg S Us Al Sjc • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: new, GEOMET-2000 flow bench for calibrating a variable nozzle turbocharger without shaft rotation. This flow bench can calibrate the geometry of vacuum, air and electronically controlled turbochargers. The equipment is adapted to the needs of workshops for repairing turbochargers of trucks and cars. It is also designed to work with large-sized or non-standard turbocharger designs; Flowbench GEOMET-2000 will allow a regular workshop to provide professional turbine repair services, thus gaining more customers. HIGHLIGHTS Adjusting the end stop position of the air flow control mechanism (variable geometry) will eliminate the "overblowing" effect, which is detrimental to the engine. Adjusting the length of the actuator rod to adjust the actuation timing of the air flow control mechanism. Evaluating the spring elasticity of the actuator for in-depth diagnostics of vacuum and pneumatic actuators. Checking the operation of the N75 valve for turbines with vacuum valve, which is involved in controlling the turbocharger on the vehicle. Tuning of electronically driven turbos is done by connecting to an external tester ATP-1000. Vertical position of the turbocharger and free working area - comfortable and efficient work with all types of turbochargers. KEY FEATURES • More than 6200 turbo references database • Creation of a test plan for a new turbine from the manufacturer. • All measurements are done in real time. • Calibration of the test bench before starting work • Automatic atmospheric pressure and temperature compensation • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Turbo Test software. • Creation and printing of reports on the tuning process. • Quick turbine installation thanks to magnetic adapters • Self-diagnostics SPECIFICATIONS Maximum productivity of the vacuum pump 180 m3 Required pressure in the pneumatic system 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1190 х 520 х 1730 mm Dwodpjn E N E Ejfx Al Sec Weight 255 kg

Condition: new, DRIVESHAFT BALANCING MACHINE BVI-03-88 Balancing machine for professional repair of cardan shafts up to 200 kg. The hard-bearing machine is adapted for heavy cardan shafts of trucks and special machinery. The high sensitivity of the supports allows also high-quality balancing of cardan shafts of passenger cars. The machine is designed for balancing cardan shafts in the facilities of cardan repair workshops. The machine can be quickly reconfigured for balancing a large amount of single cardan shafts of various designs, as well as for the production of small batches of shafts. . . . TWO TIMES faster then your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . .. ... HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 5200mm, weight up to 200kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Hard-bearing type machine - safe balancing of shafts with large initial unbalance • Machine is operated by one worker • Sliding tailstock spindle - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 200 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 5200 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2500 rpm Parameters of the supply network 380V, 3 Ph, 50Hz Power consumption, minimum, 3 kW Djdpjn E Skwjfx Al Sjwc Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 1100 kg

Condition: new, VSR turbocharger high-speed balancing machine SBR-10 SBR-10 professional specialised equipment for high-speed balancing of assembled turbo cartridges. Equally useful for car and truck turbocharger. The machine was designed for entry level turbocharger repair workshop, including medium re-manufacturers. It solves a wide range of tasks that repair centres face on a daily basis. Dodpfenfvmhex Al Sswc The SBR-10 simulates the same testing and balancing conditions as the turbocharger on the vehicle, this allows the quality of the repair to be guaranteed. It also allows checking turbocharger for oil leakage. A well-balanced turbocharger has a long service life which reduces the return rate of turbochargers and helps to build up your reputation. HIGHLIGHTS Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos Includes adapters for installing turbochargers with lower oil inlet and reverse rotation turbines Oil system with oil heating allows to recreate similar conditions to the real one during balancing. The turbocharger rotation and measurement is automatic. The cycle includes acceleration to maximum speed, measurement during the cycle, and air shutdown. Emergency shutdown is provided in case of extreme vibration increase, which prevents cartridge destruction even in case of assembly errors Automatic cycle allows to carry out vibration measurement in a short and sufficient period of time. Vibration measurement of the turbocharger housing - up to a value of 10G, which 2 times better than other analogs. KEY FEATURES • car and truck turbocharger balancing • Any turbocharger installation • All type turbocharger adapters • Reverse rotation adapters • Balancing speed up to 300 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Automatic cycle turbocharger balancing • An industrial fanless touch screen pc control system • Access to self-editing of the data base • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum compressor wheel diameter 120 mm Maximum rotation speed 300 000 rpm Pneumatic system operating pressure 0,8 – 1,0 MPa Minimum air receiver volume 1000 L Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1274 mm Weight 285 kg We manufacture fuul range turbo repair equipment. Please contact us to get more info! 👇

Condition: new, New Technology Trapezoidal Sheet Roll Forming Machine consists of these parts; Hydraulic Roll Opening and Roll Loading Trolley, 10 T Polyethylene Protective Film Coating Unit, Metal Sheet Aligning Unit, Metal RollForm Generating Unit, 18 & 36 Stations According to Form Type, Flying Continuous Length Sizing Shear Unit, Automatic Stacking and Packaging Unit, Automatic Siemens Electric Control Unit. All of our machines have CE MARKING. Please contact us for additional information and technical documents. Dwedpfx Asf Nqghsl Soc

Condition: used, Control: FANUC 0i-TD YOM: 2014 B-axis Max: 830° X-axis Travel: 243 mm Y-axis Travel: 50 mm Z-axis Travel: 740 mm Chuck Dia 10” Dodpozy Iquofx Al Sewc Max. Workpiece Diameter: 350 mm Spindle Speed: 4000 RPM Max. Bar passage: Ø 64 mm Tool turret: 12 positions Tool attachment: bmt-65 Sub Spindle chuck Dia 6” Sub spindle speed: 6–6000 rpm Spindle nose: a2-8 Sub spindle nose: a2-5 Complete with swarf conveyor Machine Depth: 2080 mm Machine Weight: 9600 kg

Condition: used, Year of construction: 2013, A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine is equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Dedpfx Alezzwg Us Sswc Specification Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain. With following options fitted : - Pneumatic tool change ISO 30 - Drilling unit with ER25 collet. - Extended Y axis stroke 400mm - Increased clamping capacity 200mm. Year - 2013 CE Compliant Serial Number - 22170

Condition: excellent (used), Year of construction: 2020, swing 700mm, maximum turning diameter 480mm, bar capacity 80mm, maximum turning length 1240mm, Djdpfxjz Ebmws Al Sjwc spindle speed 3,250 rpm, , 12 station turret, spindle power 25.5Kw, siemens 840D Slimline control, tool setter, coolant, Swarf Conveyor.

Condition: good (used), Year of construction: 2007, swing over cross-slide 935mm, swing over cross-slide 738mm, Maximum cutting diameter 620mm, Maximum cutting length 2158mm, Bar capacity 130mm, Spindle speed 2,400rpm, Main spindle power 30 Kw, 12 station turret. Mori Control M730BM, swarf conveyor, 3 jaw chuck, fixed steady. Dodpfxez D H Nue Al Sjwc

Condition: excellent (used), Year of construction: 2021, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor. Dsdpfxsz Ha H Sj Al Sewc

Condition: excellent (used), Year of construction: 2012, Capacity Swing over bed 950mm Swing over carriage 630mm Max turning diameter 950mm Max turning length 4845mm Distance between centres 5000mm Max load between centres 5000kg Spindle Spindle speeds 2 - 630rpm 630 H Max 205 L Max Dwedpfjzhaqvox Al Sjc Spindle speed range step manual 2 Spindle nose type A2-15" Spindle bore 254mm Spindle centre taper MT6 Number of Tool positions 8

Condition: excellent (used), Year of construction: 2021, 2021 Morgan Rushworth XPE CNC 3100/100 CNC Pressbrake With ESA Bend CNC Touch Screen Controller Bending Power 100 Tonne. Bending Length 3,100mm. 'Y' Axis Approach Speed 75mm/sec. 'Y' Axis Bending Speed 10mm/sec. 'Y' Axis Return Speed 75mm/sec. 'X' Axis Travel 750mm. 'R' Axis Travel 160mm. Stroke 240mm. Daylight 505mm. Motor Power (2) 5.5kW. Nominal Power (Excluding Options) 21kW. With 2 Back Gauge Fingers, 2 Sheet Support Arms & Foot Switch. S/No. B28015 (2021). Dwodpfxsz H U Uko Al Ssc Overall Dimensions L4,350 x W2,040 x H2,515mm. Weight 5,900mm.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 6,000 rpm, bar passage: 65 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Tool turret Number of turrets: 3 Tool holder: VDI 25 W-gear Main and counter spindle Main and counter spindle speed: up to 6,000 rpm Bar diameter: 65 mm MACHINE DETAILS Coolant tank: 600 l Coolant pressure: 8 / 18 bar EQUIPMENT Gantry removal device Hainbuch HS Axzug / GS Axfix Dwsdpjz Ibf Ejfx Al Soc Chip conveyor Coolant tank with strainer basket Coolant pump Coolant cooling unit FMB Turbo 10-65, 3-meter bar feeder

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10367, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Dedoz Dudgepfx Al Sswc Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller manufacturer: Heidenhain TNC 426 PB, workpiece weight (max.): 750 kg, total height: 2,750 mm, total length: 4,000 mm, total width: 2,250 mm, table width: 490 mm, table length: 1,000 mm, table load: 750 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,200 kg, spindle motor power: 13,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, 3-axis CNC machine (VMC) BRIDGEPORT - VMC 800 XP MACH-ID 9835 Make: BRIDGEPORT Type: VMC 800 XP Control: Heidenhain TNC 426 PB X - Travel: 800mm Djdpez Nw Igsfx Al Sewc Y - Travel: 510mm Z - Travel: 600mm Table Length: 1000mm Table Width: 490mm Table load: 750 Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: Sk40ISO/Bt/Mk Power on spindle: 13kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 4000mm Width: 2250mm Height: 2750mm Weight: 4200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 5,000 rpm, controller model: INDEX C200-4, TECHNICAL DETAILS Main Spindle Spindle bore with collet clamping: 65 mm Spindle diameter in the front bearing: 100 mm Speed: max. 5,000 rpm Spindle nose according to ISO 702/1: Size 5 Torque at 100%: max. 62/95 Nm Power at 100%: max. 13/20 kW Turret 1 Number of tools: 8 Tool system according to DIN 69 880: 25 mm Indexing time for 1 station: 0.2 s Cross Slide 1 XZ Slide travel X-axis: 90 mm Slide travel Z-axis: 280 mm Feed force X-axis: 5,500 N Feed force Z-axis: 5,500 N Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Resolution X-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Turret 2 Number of tools: 6 Indexing time for 1 station: 0.25 s Cross Slide 2 XZ Slide travel X-axis: 81 mm Slide travel Z-axis: 80 mm Feed force X-axis: 8,300 N Feed force Z-axis: 5,500 N Rapid traverse X-axis: 16 m/min Rapid traverse Z-axis: 24 m/min Resolution X-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Driven Tools Speed: max. 6,000 rpm Torque: max. 8 Nm Tool holder bore: 25.4 mm MACHINE DETAILS Control system: INDEX C200-4 Correction accuracy: 0.001 mm Input accuracy: 0.001 mm Output accuracy: 0.001 mm Coolant system Pump capacity: 60 l/min at 5.5 bar Pump capacity: 20 l/min at 20 bar Filling volume: approx. 210 l Hydraulics Delivery rate: 19 l/min System pressure: 90 bar Filling volume: 50 l Dimensions & Weight Footprint: 3,708 (2,495) × 1,240 mm Height: 1,750 mm Floor space requirement without material handling: 3,708 (2,495) × 1,890 mm Dwsdpfx Alez Im Urj Ssc Weight: approx. 2,500 kg Three-phase connection: 400 V, 50/60 Hz Connected power: 20–45 kVA Protection of the mains supply line: 35–80 A EQUIPMENT