Used Comet 14.6 Hq for sale (138)

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables Cedpoyug R Refx Al Ajhc setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-pressure cleaner PTC Easypower B, similar but not a Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo model. - Operating pressure: 500 or 700 bar - Flow rate: 21 or 15 l/min - Engine: Vanguard 31 HP Stage V gasoline engine, 31 PS/23 kW, 3400 rpm - Dimensions: 1,000 x 820 x 850 mm - Dry weight: approx. 190 kg - High-pressure pump: Comet TW 500 Premium three-piston pump with ceramic pistons - Gearbox with 1560 rpm pump Codpfjfdz Eyox Al Ashc - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance - Trolley with 4 industrial wheels, 350 mm - Electric starter - Operating hour counter - Continuously adjustable pressure valve made of stainless steel with EASY-START - Large water filter with easy-to-maintain filter cartridge - Includes: 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance, and flat jet nozzle 15° The following models are available: Easy Power B 21/500 | 21 l/min, 500 bar Easy Power B 15/700 | 15 l/min, 700 bar

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: Cedpfx Asdqkrwol Aehc - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: new, functionality: fully functional, mileage: 1 km, power: 14.7 kW (19.99 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 2,420 kg, empty load weight: 2,420 kg, operation weight: 2,420 kg, lifting height: 4,300 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, Equipment: additional headlights, adjustable chassis, air conditioning, cabin, hydraulics, Excavators GT3000 The GT3000 excavator is a modern tracked machine designed for earthmoving operations requiring excellent working range, high digging force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation works, installation tasks, municipal projects, and operations in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator features a 0.09 m³ bucket with a width of 460 mm. The bucket digging force of 17.6 kN allows for efficient excavation, even in tougher soils. The maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a wide working range without the need for frequent repositioning. A digging height of up to 4510 mm and a dumping height of 2760 mm enable easy loading of materials onto transport vehicles. Dimensions and Stability The overall machine dimensions are 4010 mm in length, 1540 mm in width, and 2360 mm in height to the top of the cab (1380 mm to the top of the boom). The track contact length of 1530 mm and a track width of 1510 mm ensure stability during operation. Track shoes with a width of 250 mm and a low ground pressure of 26.7 kPa allow safe working on less solid surfaces. Mobility and Maneuverability A tail swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and counterweight clearance of 485 mm, along with a minimum ground clearance of 255 mm, ensure smooth movement over uneven terrain. The robust undercarriage with a track length of 1895 mm provides excellent traction and safe operation. Technical Specifications Operating weight: 2420 kg Engine type: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.7 kW Rated engine speed: 2200 rpm Max. hydraulic system pressure: 18 MPa Max. gradeability: 30° Ground pressure: 35 kPa Max. travel speed: 2.5–3.5 km/h Max. tractive force: 16 kN Max. slewing speed: 11 rpm Max. digging force: 15 kN Max. digging height: 4300 mm Max. dumping height: 2530 mm Chodpeymtdnefx Al Asc Max. digging depth: 2550 mm Max. digging radius: 4150 mm Digging radius at max. height: 2700 mm Minimum radius: 1800 mm Boom length: 1950 mm Arm length: 950 mm Bucket width: 450 mm Overall length: 3950 mm Overall width: 1400 mm Overall height: 2300 mm Minimum turning radius: 790 mm Track length on ground: 1870 mm Track width: 250 mm Ground clearance: 250 mm Platform width: 1330 mm Engine hood height: 1350 mm Platform height above ground: 480 mm

Condition: good (used), Item: J-10505-Dairy Ice Cream plant Complete Ice Cream plant for diverse Ice Cream products, very nice condition. EU Capacity: - Tetra Pak Straight-line - Stick Bars. 5.000 pcs/h - Tetra Pak Comet, 5.000 pcs/h Plant consisting on: Pasteurization line Split system with capacity 1.000 l/h Tetra Pak Hoyer Frigus 600 Tekno Ice Frigus 600 - 3 pieces Ice Water pool Technofreeze CVT 30 Chjdpfxeiiyu Hj Al Aec Double Jacketed Tanks 1.000 L - 5 pieces Air Screw Compressor Gas Heating

Condition: new, functionality: fully functional, CHEREAU SEMI-TRAILER LATEST GENERATION THERMOKING FRIDGE UNIT A-400 BRAND NEW, READY FOR REGISTRATION Chodpsyk Ea Nefx Al Asc ALUMINIUM FLOOR PALLET STORAGE ALLOY WHEELS MICHELIN TYRES 1ST STEERABLE AXLE 3RD LIFT AXLE TAILORED FINANCING OR LEASING SOLUTIONS AVAILABLE ON SITE. FROM 24 UP TO 96 INSTALMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL – NAPLES HQ DOMENICO ESPOSITO S.P.A. – EBOLI (SA) HQ – AUTHORISED DEALER FOR MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACT: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30AM–7:00PM - SATURDAY 8:30AM–2:00PM Domenico Truck srl declines any responsibility for potential discrepancies regarding technical specifications, optional features or characteristics, which may differ in some cases from those indicated in this description. Please verify the details of the specific vehicle.

Year of construction: 2023, condition: used, Pump speed 2.924 U/min Nominal delivery flow 21 m³/h Rated head 95,1 m Capacity 11 kw In our assessment, the pumps are in good used condition. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Chodpfszbvgusx Al Ajc Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, PTC Torpedo hot water unit 140°C and steam unit 140°C/32 bar, skid-mounted, similar but without Dynajet, Oertzen, Falch, DIBO, etc. - Skid mounted on a hot-dip galvanized frame with forklift slots. The following hot water models are available: Torpedo 23/250 | 23 l/min. at 250 bar | Engine: Kohler KDW 1003 26 kW Torpedo 23/350 | 23 l/min. at 350 bar | Engine: Kohler KDW 1404 26 kW - Dimensions with 680 l water tank: 2,300 x 1,310 x 1,310 - Dimensions with 1000 l water tank: 2,300 x 1,310 x 1,630 Codpsfdvldsfx Al Ashc - Unladen weight: approx. 600 kg - High-pressure pump: Comet RW/TW Premium - High-pressure hose reel: manual or automatic with max. 30 m. 1/2" or 50 m. 3/8" hose (included) - Water supply hose reel: manual with 50 m. 3/4" hose - Diesel tank: 75 l - Anti-scaling pump with tank - 80/100 kW heating module - Options and accessories available upon request.

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), fuel type: gasoline, color: yellow, overall weight: 14,600 kg, chain condition: 100 %, Year of construction: 2026, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, head guard, onboard computer, rubber tracks, standard shovel, New at Bagger2Go – Shantui SE135 14.6-ton tracked excavator for professional use in civil engineering, landscaping, and demolition applications. Technical Specifications - 360-degree camera with detection signal - Verachtert CW20 quick coupler - Demolition protection - Refueling pump - Premium hydraulic connections Technical Data • Engine: Cummins QSF3.8T, 4-cylinder, water-cooled, turbocharged • Power: 90 kW at 2,200 rpm • Operating weight: 14,620 kg • Digging depth: up to 5,490 mm • Ground-level reach: up to 8,300 mm • Gradeability: 70% (35°) • Fuel tank: 265 liters Engine: Cummins QSF3.8T Power: 90 kW @ 2,200 rpm Operating weight: 14,620 kg Hydraulics and Drive - Kawasaki main pump - Kawasaki control valve - Kawasaki swing motor - Nabtesco travel motor Features - Hydraulic Verachtert quick coupler - Rubber pads on tracks - Dozer blade - Demolition guard - ROPS/FOPS protection cab - Comfort cab with air-suspended seat Chsdoyu Sp Espfx Al Aec Excavator in stock and immediately available. Inquire now.

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: S1AJM3HKC00022X, ID UC04 SAMSUNG ULTRAASOUND HS40 FOR MULTIPURPOSE ULTRASOUND IMAGING; S/N: S1AJM3HKC00022X; year of manufacture: Dec 2019 Attention: The ultrasound machine is sold with a single CF4-9 micro convex probe. The rest of the probes are missing but can be bought separately depending on the need. System Version: 1.03.01 - Scanning modes: 2D / M / PW / C / PD - Biometry Assist Chodpfog Twgmsx Al Aec - Active licenses: Multivision / DICOM / HQ Vision - Sony UP-X898MD Hybrid Graphic Printer 201SAMS0004 Samsung HS40 OB/GYN ultrasound, powered by CrystalLive Samsung HS40 Dimensions and Weight: • Height: 1,354 ~ 1,620 mm (with monitor) • Width: 520 mm • Depth: 730 mm • Weight with monitor: 54 kg ( 119lb.) Samsung HS40 Specifications: • Digital beam former • Displayed imaging depth: 0 – 38 cm (probe dependent) • Minimum depth of field: 0 – 2 cm (probe dependent) • Maximum depth of field: 0 – 38 cm (probe dependent) • Continuous dynamic receive focus/continuous dynamic receive aperture • Adjustable dynamic range from 30 to 256 dB Samsung HS40 Electrical power: • Voltage: 100 – 240 VAC • Frequency: 50/60 Hz • Power Consumption – 800 VA with Peripherals Price Euro 12.000 Euro + VAT, FCA: Bucharest/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2000, Boring machine Manufacturer: TOS Type: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Report available Travel distances: X/Y/Z: 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Chodpfx Aljx A Ayij Aoc Clamping area: 1,800 x 1,600 mm Table load: 12 tons Number of tool positions: 60 Spindle connection: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Handwheel Heidenhain Telescopic guard completely overhauled with new wiper. Dimensions: L x W x H approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 tons 51026ä

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 390 mm, total height: 2,580 mm, total width: 1,900 mm, overall weight: 2,100 kg, product length (max.): 2,700 mm, number of axes: 5, This 5-axis TOPEDM TSH-400T CNC EDM Spark Erosion Hole Drilling Machine machine was manufactured in 2012. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 390 mm. The machine includes a stainless steel table size of 480 × 458 mm and an automatic electrode changer with 21 positions. If you are looking to get high-quality spark erosion hole drilling capabilities, consider the TOPEDM TSH-400T Spark Erosion Hole Drilling Machine EDM we have for sale. Contact us for further details. • Machine head travel: 310 mm Chsdpfxey T Savs Al Asc • Stainless steel table size: 480 × 458 mm • Work tank size: 670 × 930 × 330 mm • Max. distance between guide unit and worktable: 315 mm • Electrode diameter: Ø0.15 – Ø6.0 mm • Submersible tank: Yes • Dielectric system: Pressure and deionization control • Max. machining current: 50 A • Max. power consumption: 5 kVA • Electrical data: 380 V, 50/60 Hz, 14.6 A Additional equipment • Automatic Electrode Changer (AEC), 21 positions • Automatic Guide Changer (AGC), 5 guides

Condition: good (used), Milling chuck, boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, face head, facing and boring heads -Manufacturer: Komet microbore twinbore, milling heads, facing and boring heads with countersinking tool Cedpeu S Tbhofx Al Aohc -Type: various designs, see photos -Comet: Type AB/VD 80 / AB/V 63x85 / AB/FZ 63 / AB/FZ 40 / AB/FZ 25 / FZ 32-100-3 / 2x AB/ISO 40x63x50 -Comet: Type AB/VD 63 / AB/VD 40 / AB/FZ 80 / AB/V 40x60 / AB/VD 50 / AB/V 25x60 / AB/VD 25 ... -twinbore: microbore MTP-75-1 / MTP-75-80 ... -Price/Fee: complete -Dimensions of transport case: 715/365/H210 mm -Total weight: 72 kg

Condition: excellent (used), Clamp holder make Comet FG IIII (28396) for Comet threaded steel FG IIII TR 12 Cjdsmk E Uijpfx Al Ashc

Condition: used, EMMEGI PHANTOMATIC 3-Axis CNC Machining Centre The EMMEGI PHANTOMATIC is a vertical 3-axis CNC machining centre designed for programmable machining operations on aluminium, PVC and steel profiles. Steel profiles can be processed up to a maximum thickness of 3 mm. The machine is suitable for milling, drilling, tapping and through-machining operations. It is equipped with a 5.5 kW electrospindle, reaching a maximum speed of 18,000 rpm, with an ISO 30 tool holder and manual tool change. The machine is operated through a CNC/PC control system with Cam-Editor-Drill software. It features four standard manually positioned clamps and two stops. Thanks to the workpiece repositioning function, it can process profiles with a maximum length of 4,800 or 6,800 mm, depending on the machine version. Main technical specifications: X-axis travel: 2,400 mm Y-axis travel: 240 mm Z-axis travel: 230 mm Maximum X- and Y-axis speed: 20 m/min Maximum Z-axis speed: 14.6 m/min X-, Y- and Z-axis acceleration: 1.66 m/s² Chodpfx Aez Aqmwel Aoc Tool change: manual Maximum milling tool diameter: 50 mm Maximum tapping capacity: M8 Standard clamps: 4 Stops: 2 Electrospindle power: 5.5 kW Maximum electrospindle speed: 18,000 rpm Tool holder: ISO 30 Installed electrical power: 7 kW Power supply: 380 V Operating pressure: 6–8 bar Air consumption: 50 Nl/min Maximum working length with repositioning: 4,800 mm Maximum working width: 240 mm Maximum working height: 230 mm Dimensions: 2,800 × 1,150 × 1,850 mm Weight: 600 kg

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-H hot water unit, 95°C, steam 140°C/32 bar, and high-pressure steam 150°C/200 bar (only for the 16 l/min and 350 bar version). Trailer similar but not a Dynajet, Oertzen, Falch, DIBO, etc. - Single-axle trailer with hot-dip galvanized frame, support legs with wheel, parking brake, automatic reverse gear, stand feet, rear lights, and reflectors, drawbar with 50 mm coupling, 13" tires, and ABS. The following hot water models are available: CTR-H 21/200 | 21 l/min at 200 bar | Engine: Kohler KDW702, 12.6 kW CTR-H 20/350 | 20 l/min at 350 bar | Engine: Kohler KDW1003, 19 kW CTR-H 16/350 | 16 l/min at 350 bar | Engine: Kohler KDW1003, 19 kW | High-pressure steam 150°C at 200 bar Chedpfxefdkako Al Ajc - Dimensions: 3,045 x 1,390 x 1,190 - Unladen weight: approx. 400 kg - High-pressure pump: Comet RW/TW Premium with integrated gearbox - HD hose reel: manual, max. 60 m 1/2" or 80 m 3/8" hose (included) - Water supply hose reel: manual, 35 m 3/4" hose - Water tank: 200 l - 75 kW heating module - Options such as warning light, automatic hose reel, and accessories available upon request

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in cleaning unit on hot-dip galvanized and painted high-quality steel frame with forklift attachments, suitable for installation in service vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Whale 30/250 | 30 l/min. at 250 bar | Engine: Honda GX630 14.7 kW Whale 36/210 | 36 l/min. at 210 bar | Engine: Honda GX630 14.7 kW Whale 43/180 | 43 l/min. at 180 bar | Engine: Honda GX630 14.7 kW Whale 55/160 | 55 l/min. at 160 bar | Engine: Honda GX690 17.7 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 650 x 1,000 x 1,030 mm Empty weight without water tank: approx. 250 kg Dimensions and empty weight with 300 l water tank: approx. 1,160 x 1,000 x 1,030 mm and approx. 280 kg Dimensions and empty weight with 500 l water tank: approx. 1,260 x 1,000 x 1,030 mm and approx. 300 kg HIGH-PRESSURE PUMP:  Manufacturer: COMET  Model: TW 13022S Premium ENGINE:  Manufacturer: Honda  Model: GX 690  Fuel: Gasoline  Cooling: Air  Cylinders: 2  Displacement: 688 cm³  Max. Power: 24 hp (17.7 kW)  Max. Engine Speed: 3,600 rpm TRANSMISSION: Gearbox housing CONTROL PANEL:  Ignition key  Operating hour counter  Electronic fuel gauge  LED indicator for low lubricating oil pressure  Emergency stop button INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shutdown function. SAFETY AND PRESSURE RELIEF VALVES:  The unit is equipped with a safety valve, a pressure relief valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 60 m ½“ high-pressure hose  Hose: 50 m ½“ high-pressure hose (Included) LOW-PRESSURE WATER FEED HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (Included) FUEL TANK:  Capacity: approx. 13 l Cedpfodqmttsx Al Ashc WATER FILTER:  With washable cartridge and drain valve  Filtration rating: 50 Mesh INCLUDED IN DELIVERY:  Multifunctional radio remote control IMET; - Engine on / off; - Bypass on / off; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  300, 400 or 500 l water tank made of polyethylene; OPTIONAL (UPON REQUEST):  60 m ½“ high-pressure hose;  Pulsation/booster pump;  2nd high-pressure hose reel  Electric high-pressure hose reel (connection to the vehicle battery required) ACCESSORIES (UPON REQUEST):  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat spray nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispensing kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories upon request

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 1 l, color: yellow, operation weight: 3,000 kg, maximum load weight: 3,000 kg, lifting height: 4,010 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, first registration: 01/2026, emission class: euro5, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: 1, Equipment: additional headlights, air conditioning, cabin, Excavators GT3000 The GT3000 excavator is a modern crawler machine designed for earthmoving operations that require an extensive working range, high breakout force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation work, installation jobs, municipal projects, and tasks in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator is fitted with a bucket offering a capacity of 0.09 m³ and a width of 460 mm. The bucket breakout force of 17.6 kN enables efficient digging, even in tougher soil conditions. A maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a large operational area, reducing the need for frequent repositioning. A maximum digging height of 4510 mm and a dumping height of 2760 mm allow easy loading of material onto transport vehicles. Dimensions and Stability The overall dimensions of the machine are 4010 mm in length, 1540 mm in width, and 2360 mm in height up to the top of the cab (1380 mm to the top of the boom). The track contact length with the ground of 1530 mm and a track gauge of 1510 mm ensure stability during operation. The 250 mm wide track shoes and low ground pressure of 26.7 kPa allow safe operation on less compacted surfaces. Mobility and Maneuverability A rear swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and a counterweight clearance of 485 mm, as well as a minimum ground clearance of 255 mm, enable smooth movement over uneven terrain. The sturdy undercarriage with a track length of 1895 mm guarantees good traction and safe operation. Technical specifications Operating weight: 3000 kg Engine: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.6 kW Bucket capacity: 0.09 m³ Bucket width: 460 mm Bucket breakout force: 17.6 kN Swing arm: Present Joystick: Present Swing speed: 13 rpm Max. digging height: 4510 mm Max. dumping height: 2760 mm Max. digging depth: 2810 mm Max. reach: 4375 mm Rear swing radius: 710 mm Track contact length with ground: 1530 mm Total track length: 1895 mm Track gauge: 1510 mm Track shoe width: 250 mm Swing frame width: 1350 mm Ground pressure: 26.7 kPa Total length: 4010 mm Total width: 1540 mm Total height (to top of boom): 1380 mm Codpsymtfxsfx Al Ajhc Total height (to top of cab): 2360 mm Counterweight clearance: 485 mm Minimum ground clearance: 255 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 25,769 h, machine/vehicle number: 159687, laser power: 2,500 W, travel distance X-axis: 3,335 mm, travel distance Y-axis: 1,545 mm, travel distance Z-axis: 420 mm, swivel angle A-axis (max.): 360 °, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 3335 mm Travel Y-axis: 1545 mm Travel Z-axis: 420 mm A-axis: ±360 ° B-axis: ±135 ° Maximum workpiece dimensions: 3050 x 1525 x 22 mm Maximum table load: 810 kgf MACHINE DETAILS Laser power: 2500 W Laser model: YB-L250A8M Csdpfx Aeymfmbol Ashc NC control: Mazak & Fanuc L-64 Dimensions & Weight Machine dimensions: 7,525 x 2,875 x 2,300 mm Chiller dimensions: 920 x 1,600 x 1,780 mm Extraction unit dimensions: 850 x 850 x 930 mm Machine weight: 14.6 t Operating hours: 25,769 h EQUIPMENT Chiller Extraction unit

Condition: excellent (used), functionality: fully functional, RADIAL DRILLING MACHINE COMETRA 1600 X 50 Codpfsz E Sl Rox Al Aohc MODEL P 50 CENTRALIZED LOCKING SYSTEM USED MACHINE

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multistage centrifugal pump with opposing suction and discharge connections (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal promises high reliability and ease of servicing. Power is transmitted via a rigid, split coupling. The pipe connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer Product Group: Vertical Centrifugal Pumps Manufacturer Product Group: Vertical Centrifugal Pumps CRN Centrifugal pump CRN Manufacturer article number: 96122358 Connection inlet side: Flange Connection outlet side: Flange Chedpfxjwbfigj Al Aec Connection standard inlet side: EN 1092-2 Nominal diameter, connection outlet side: DN 65 Design: Vertical Speed: 2924 min Motor output power: 11.0 kW Protection class: IP55 Max delivery head: 90.2 m Max working pressure: 16 bar Weight: 193.2 kg List price: 14,844.00 € Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items in other sizes - new and used - in our store! International shipping costs on request!

Condition: used, Stick electrodes 2.5 x 350 Csdpfod Emhgsx Al Aohc -Type: COMET J50N -Price: per package -Number: 4 packages available -Weight per package: 4.1 kg

Condition: new, Year of construction: 2022, functionality: fully functional, NEW Grundfos Pump CRN 10-12 A-FGJ-G-E-HQQE | Stainless Steel AISI 316 | 4 kW Condition: Brand new, never used. Model: CRN 10-12 A-FGJ-G-E-HQQE Manufacturer: Grundfos (Leading pump solutions provider) DEVICE DESCRIPTION The item for sale is a high-performance, vertical multistage centrifugal pump from the CRN series. This is a version made entirely from acid-resistant stainless steel (AISI 316), setting it apart from the standard cast iron models (CR). It is designed for operation in the most demanding industrial conditions, ensuring reliability when handling aggressive and demanding liquids. The pump is an ideal solution for businesses seeking a high-efficiency device, ready for immediate installation in water treatment systems, technological processes, or high-pressure setups. _____ KEY TECHNICAL DATA • Rated flow: 10 m3/h • Rated head: approx. 96.7 m (max up to 122 m) • Motor power: 4 kW • Power supply: 3-phase • Rotational speed: 2900 rpm • Maximum operating pressure: 25 bar • Liquid temperature range: -20°C to +120°C • Number of impellers: 12 • Year of manufacture: 2022 CONSTRUCTION AND MATERIALS • Material configuration (G): All liquid-contacting parts are made from stainless steel EN 1.4401 / AISI 316 (providing maximum corrosion resistance). • Shaft seal (HQQE): Durable cartridge mechanical seal made from silicon carbide (SiC/SiC) with EPDM elastomers. Guarantees longevity and leak-tight operation even with hot water. • Connection (FGJ): Universal flanged system (DIN/ANSI/JIS), allowing easy adaptation in existing installations. _____ APPLICATIONS Thanks to its acid-resistant construction, the CRN pump is suitable for: 1. Chemical and pharmaceutical industries (pumping acids, alkalis, aggressive media). 2. Filtration and water treatment systems (reverse osmosis, ultrafiltration). 3. Industrial washing systems and CIP/SIP cleaning setups. 4. Process water installations in brewing, dairy, and food industry. _____ WHY BUY THIS PUMP? Chedpfx Aox Im Ahel Aec • Premium product: The CRN series is the “Mercedes” among vertical pumps. • Time-saving: Device is available immediately (no long lead times from the manufacturer). • No usage marks: The pump is brand new, properly stored, and ready to operate at full capacity. Important: Please verify that the electrical and hydraulic parameters match your project requirements before purchase.

Year of construction: 2018, condition: excellent (used), DYCOMETAL CRT2VT-180 Ice Water Immersion Chamber / Thermal Shock Test Chamber Manufacturer: DYCOMETAL Equipos Control Calidad, S.L. Type: CRT2VT-180 Year of manufacture: 2018 Machine type: Thermal shock test chamber / Ice water immersion chamber Test volume / model class: approx. 180 liters For sale is a used DYCOMETAL CRT2VT-180 thermal shock test chamber with a combined hot air / water bath testing system. The system is used to perform rapid thermal shock tests. The test specimen is placed on a pneumatically movable test specimen carrier (cradle), heated in the upper hot air zone, and then immersed in the lower, temperature-controlled water bath. The rapid change between the hot air zone and the water bath subjects components, assemblies, and materials to significant thermal stress. The change can be carried out manually or via a programmed sequence; the immersion depth is adjustable. Technical data: Model: CRT2VT-180 Year of manufacture: 2018 Protection class: IP22 Temperature range: 0 °C to +200 °C Testing system: Hot air / water bath system Upper zone: Hot air testing area Lower zone: Temperature-controlled water / immersion bath Test specimen carrier: Pneumatic cradle Max. controlled travel: approx. 500 mm Operating modes: Manual / Automatic Water bath / cooling system: Temperature-controlled immersion bath Automatic water level monitoring Water inlet / water outlet Integrated water circuit with circulation pump Refrigerant: R134a / 3.4 kg Cedszzbwwspfx Al Aehc GWP: 1,430 CO₂ equivalent: 4.86 t Electrical data: Mains connection: 400 V / 3N~PE / 50 Hz Connected load: 5.32 kW Current consumption: 11.51 A Control / equipment: EUROTHERM 2604 program controller Manual / automatic test operation PLC control Ethernet communication Anybus Modbus gateway Eaton easy controller EUROTHERM iTools software Pneumatic test specimen carrier / cradle Adjustable immersion depth Stainless steel interior Circulation fans Observation window / test chamber lighting Emergency stop / alarm and safety system Documentation and software as shown in the pictures Application areas: Thermal shock and ice water immersion testing Thermal cyclic stress Electronics and automotive components Sensors and control units Material and component testing Quality assurance / research and development Reliability testing Dimensions / transport data: Internal dimensions (L × W × H): approx. 650 × 650 × 450 mm External dimensions (L × W × H): approx. 1,800 × 1,250 × 2,320 mm Additional height of pneumatic lifting cylinder: approx. 1,500 mm Total height including lifting cylinder: approx. 3,820 mm Weight: approx. 810 kg Transport by freight forwarder Condition / scope of delivery: Used – Year of manufacture 2018 Optical condition as shown in the pictures. DYCOMETAL CRT2VT-180 EUROTHERM 2604 controller Software and documentation as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: new, Year of construction: 2025, skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications The skylaser laser marking / engraving laser at a Glance: Processing Area : from 110 x 110 or 120x120 or 300x300 mm (depending F- Theta lenses / 3D option) Laser: IPG ( pulsed fiber laser , YTTERBIUM PULSED FIBER LASER ) SCANLAB galvanometer Csdpfx Alsbv Dayj Ashc Nominal laser power : 20W / 30W / 50W New: Software controlled variably adjustable working width ( X axis max 200mm depending on the design . ) Included! New: Software controlled variably adjustable working height ( Z axis max 400mm depending on the design . ) Included! Optionally, other work areas - Automatic Materialzufuehrung etc. Air cooling as low power consumption Labeling speed: up to 5000 mm / s ( SCANLAB dyn AXIS ® galvanometer to reach 10 SCAN ® cube marking speeds of up to 640 characters per second. ) Redundant safety system Laser Class 1 according to the configuration or Laser class: 2 ( optional pilot through laser ) piper -technology HQ mirrors and optics for perfect results , powered by Scanlab (R ) piper -technology industrial PC with the software pre-installed control New: including Laser Focus Finder New: including process air control Optional : laser positioning : an integrated diode laser for optimal positioning Including new F -theta lens 110 x 110 mm working area with protective glass! ( To extend the working range of optional (120, 180 , 350 mm) virtually maintenance-free Key Features Let yourself be inspired and please request our product video on your sample production ! Model Mark IPG laser engraving laser skylaser Work size 100 x 100 or 120 x 120 mm (F -theta 160mm ) other optional Laser power 20 / Option: 30/50 W ( air cooled) laser method YTTERBIUM PULSED FIBER LASER Engraving