Used Csm Cnt-Scan Mm 4K for sale (72,372)

Condition: used, mileage: 500 km, power: 382 kW (519.37 HP), first registration: 04/2026, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle TG3 Municipal Truck MAN TGS 18.520 BL 4x4 all-wheel tipper with Meiller tipper body and Küpper-Weisser winter service equipment, 22,000 kg permissible gross weight for winter service, with retarder and 520 HP, 62,000 kg permissible gross combination weight Tech. Plus, air conditioning, auxiliary heater, day registration with MAN manufacturer's warranty starting from first registration, and much more. Equipment: - Mileage approx. 500 delivery kilometers - 18,000 kg permissible gross weight - 22,000 kg technically max. permissible gross weight for winter service - Front axle as externally planetary drive axle, rear axle HP-1352 - Increased load capacity on front axle to 10,000 kg for winter service up to max. 62 km/h - 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load - 9,500 kg front axle spring capacity, 13,000 kg rear axle spring capacity - Winter service hydraulics dual-circuit with screw couplings, by Küpper-Weisser - 2 hydraulic pumps on engine, 11 ccm and 22.5 ccm - Front mounting plate - Winter service lighting - Heated windshield - TGS NN medium-length cab with rear wall window - Wheelbase 3,900 mm - MAN diesel engine D2676 LFAX, 382 kW (520 HP) output with 2,650 Nm torque - Euro 6 e engine - 4x4 drive - Front axle as externally planetary axle, driven, selectable - High chassis design - Differential locks on front and rear axles - Meiller 3-way tipper approx. 4.80 m x 2.42 m x 0.60 m high - Front wall 0.80 m high - Side boards M-Jet, steel HB 450, 2.5 mm Nsdpfx Aey E D Hlsdtecr - Platform floor steel HB 400, 4 mm - Fully retractable lashing eyes in floor plate - Drop-down side panels on tipper body - Rear wall of tipper body pendulum action and partially foldable with manual claw lock - MAN TipMatic 12.28 OD with retarder 35 - Eco retarder - Transmission designed for increased drive torque - Gearbox function MAN Idle Speed Driving - Gearbox function rocking mode - Driving program MAN TipMatic Performance and Efficiency up to 70,000 kg - MAN TipMatic Offroad driving program up to 70,000 kg - MAN TipMatic Manoeuvre, shunting mode - Transfer case MAN G172 with on-road and off-road mode - Air conditioning, Climatronic - Auxiliary water heater, 6 kW - Trailer hitch Rockinger type 400 G 150A with Duomatic connection - 62,000 kg permissible gross combination weight Tech. Plus - 44,000 kg trailer load Tech. Plus - Tipper hydraulic connections at the rear - Front axle leaf-sprung, rear axle air-suspended - Front axle AP 9 t, rear axle AP 13 t - Axle ratio i=3.63 - Stabilizer for front and rear axles - MAN Comfort Steering - Electronic braking system EBS - Full brake assist - MAN EasyStart hill-hold assist - ABS ASR ESP - High-performance engine brake MAN EVBec, multi-stage - Cruise control - 310-liter aluminum fuel tank, right side - Refrigerator in driver's cab - Sun visor - 2 rotating beacons on cab roof - Work lights - Multifunction steering wheel - MAN EasyControl Engine control panel, 2 functions, operable from outside with door open - Electrically adjustable and heated exterior mirrors - Electric windows - MAN Media System 7-inch - MAN Advanced sound system - Driver comfort seat, air-suspended with lumbar support, shoulder adjustment and heating - Comfort grade seat upholstery - New vehicle with day registration and MAN manufacturer's warranty from first registration Price NET, plus 19% VAT. Attractive financing offers available upon request. All specifications without guarantee. Subject to errors and pri

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle: TG3 Municipal Truck MAN TGS 18.520 BL 4x4 all-wheel tipper with Meiller tipper body and Küpper-Weisser winter service equipment. 22,000 kg permissible gross weight for winter service, with retarder and 520 HP, 62,000 kg technically permissible gross combination weight (Tech. Plus), air conditioning, auxiliary heater, day registration with MAN manufacturer's warranty from the first registration date, and much more. Specification: - Mileage approx. 500 km (delivery mileage) - 18,000 kg permissible gross weight - 22,000 kg technically max. permissible gross weight for winter service - Front axle with hub reduction drive, rear axle HP-1352 - Increased front axle load capacity to 10,000 kg for winter service up to max. 62 km/h - 11,500 kg permissible rear axle load, 13,000 kg technical rear axle load - 9,500 kg spring load capacity front axle, 13,000 kg spring load capacity rear axle - Winter service hydraulics, dual circuit, with screw couplings, Küpper-Weisser - 2 hydraulic pumps on engine, 11 ccm and 22.5 ccm - Front mounting plate - Winter service lighting - Heated windscreen - TGS NN medium-length cab with rear window - Wheelbase: 3,900 mm - MAN diesel engine D2676 LFAX, 382 kW (520 HP), 2,650 Nm torque - Euro 6 e engine - 4x4 drive - Front axle with hub reduction, driven, engageable - High clearance design Nedpfxjy E D Eho Adtocr - Differential locks front and rear axle - Meiller 3-way tipper approx. 4.80 m x 2.42 m x 0.60 m high - Front wall 0.80 m high - M-Jet steel side panels, HB 450, 2.5 mm - Platform floor in steel HB 400, 4 mm - Tie-down rings fully recessed in floor plate - Folding side boards on tipper bed - Rear wall of tipper pendulum mounted and partially folding, with manual claw lock - MAN TipMatic 12.28 OD with retarder 35 - Eco retarder - Transmission for increased traction during operation - MAN Idle Speed Driving transmission function - Rock-free transmission function - MAN TipMatic Performance and Efficiency driving mode up to 70,000 kg - MAN TipMatic Offroad driving mode up to 70,000 kg - MAN TipMatic Manoeuvre Mode (shunting mode) - Transfer case MAN G172 with road and off-road gears - Air conditioning, Climatronic - Additional water heater, 6 kW - Rockinger trailer coupling type 400 G 150A with Duomatic connection - 62,000 kg technically permissible gross train weight (Tech. Plus) - 44,000 kg trailer load Tech. Plus - Tipping hydraulics connections at rear - Front axle leaf and rear axle air suspension - Front axle AP 9 t, rear axle AP 13 t - Axle ratio i=3.63 - Stabilizer for front and rear axle - MAN Comfort Steering - Electronic brake system (EBS) - Full-brake assistant - MAN EasyStart anti-rollback feature - ABS, ASR, ESP - High-performance engine brake MAN EVBec, multi-stage - Cruise control - 310-litre aluminium fuel tank on the right - Fridge in cab - Sun visor - 2 rotating beacons on cab roof - Work lights - Multifunction steering wheel - MAN EasyControl Engine control panel, 2 functions, operable from outside with door open - Electrically adjustable and heated exterior mirrors - Electric windows - MAN Media System 7-inch - MAN Advanced Sound System - Driver comfort seat, air-suspended, with lumbar support, adjustable shoulders and heating - Comfort-quality seat covers - New vehicle with day registration and MAN manufacturer's warranty from first registration Net price plus 19% VAT. Attractive financing options on request. All information supplied without guarantee; errors and prior sale excepted. Internal vehicl

Condition: excellent (used), Professional height gauge from the renowned Japanese manufacturer Mitutoyo. The device is designed for precise height measurement and scribing on surface plates. This model offers a measuring range up to 600 mm and is equipped with a dial indicator and fine micrometric adjustment, ensuring very precise dimensional control. The robust construction and high-quality workmanship characteristic of Mitutoyo guarantee repeatable and reliable measurements. — Ncsdpoy Dirqjfx Adtsr Technical data: • Manufacturer: Mitutoyo (Japan) • Measuring range: 600 mm • Mitutoyo dial indicator • Indicator scale division: 2.5 µm • Micrometric adjustment • Stable, heavy base • Clear measuring scale — Applications: • Measurement of component heights • Scribing on granite surface plates • Dimensional inspection • Workshops, tool rooms, quality control departments — Condition: Used, in good technical condition. Shows normal signs of use. Sold exactly as shown in the photos. — Scope of delivery: • Mitutoyo height gauge • Dial indicator • Micrometric adjustment mechanism

Condition: excellent (used), Bezel (28371) Center height 200mm diameter 65mm Nsdslrp Nqepfx Adtocr weight 9 kg more data, see picture

Condition: new, mileage: 500 km, power: 265 kW (360.30 HP), overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, Municipal New Vehicle MAN TGS 18.360 BL 4x4 All-Wheel Tipper Meiller with Küpper-Weisser Winter Service Equipment MAN manufacturer's warranty until 02.12.2026 Equipment: Mileage approx. 441 delivery kilometers 18,000 kg permissible gross weight 23,000 kg technically maximum permissible gross weight for winter service use 9,000 kg permissible front axle load 10,000 kg technically permissible front axle load for winter service operation up to max. 62 km/h 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load Winter service 2-circuit hydraulics with quick couplings, by Küpper-Weisser Front mounting plate Type F1/C as per DIN EN 15432-1 with hydraulic connections Winter service lighting Preparation for auxiliary lighting at vehicle rear Heated windscreen Preparation for 2 hydraulic pumps on the engine, 11 cm and 22.5 cm (for auxiliary equipment) Cab TGS NN medium length with rear window Wheelbase 3,900 mm Euro 6 e engine Drive 4x4 Front axle as planetary axle, driven, engageable Heavy-duty design Differential locks on front and rear axle Meiller three-way tipper approx. 4.80 m x 2.42 m x 0.60 m high Front panel 0.80 m high Side walls M-Jet, steel HB 450, 2.5 mm Tipper bed made of steel HB 400, 4 mm Flush-mounted lashing rings in floor plate Sidewalls of tipper body swinging and foldable, low-position locks Rear wall of tipper body swinging with automatic lock Transfer gearbox MAN G172 with road and off-road range MAN TipMatic 12.26 OD Transmission function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency, up to 70,000 kg Driving program MAN TipMatic Offroad, up to 70,000 kg Driving program MAN TipMatic Manoeuvre, shunting mode Air conditioning, Climatronic Additional water heater, 4 kW Tow hitch Maul Ringfeder Type RF40/G150A with pneumatic connections Tipping hydraulics connection at rear Front axle leaf-sprung and rear axle air-suspended Front axle 9 t (AP 9), rear axle 13 t (AP 13) Stabilizer for front and rear axle MAN Comfort Steering Anti-rollaway protection MAN EasyStart Full emergency brake assist Lane departure warning LDW EBS, ASR, ESP ABS Offroad with additional off-road logic Cruise control High-performance engine brake MAN EVBec, adjustable 390-liter aluminum fuel tank (right) Sun visor 2 rotating beacons and 2 work lights Toolbox in cab Reversing warning buzzer, acoustic, deactivatable when reverse gear engaged Reversing camera Multifunction steering wheel MAN EasyControl panel, 2 functions operable from outside with the door open Electrically adjustable and heated exterior mirrors Electric windows MAN Media System Advanced 7-inch MAN Sound System Smartphone integration Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and heating Comfort quality seat covers Ncodpfsyv Tt Aox Adtsr Municipal new vehicle with one-day registration on 02.12.2025 Archive images Net price plus 19% VAT. Attractive financing options available on request. All details without guarantee. Subject to errors and prior sale. Internal vehicle number: 2517

Condition: used, mileage: 441 km, power: 265 kW (360.30 HP), first registration: 12/2025, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, Municipal New Vehicle MAN TGS 18.360 BL 4x4 All-Wheel Drive Tipper Meiller with Küpper-Weisser Winter Service Equipment MAN manufacturer's warranty until 02.12.2026 Specifications: - Mileage approx. 441 delivery kilometers - 18,000 kg permissible gross vehicle weight - 23,000 kg technically permissible gross vehicle weight for winter service - 9,000 kg permissible front axle load - 10,000 kg technically permissible front axle load in winter service mode up to max. 62 km/h - 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load - Winter service hydraulic system, 2-circuit with quick couplers, by Küpper-Weisser - Front mounting plate, type F1/C, according to DIN EN 15432-1 with hydraulic connections - Winter service lighting - Preparation for additional lighting at the rear of the vehicle - Heated windshield - Preparation for 2 hydraulic pumps on the engine, 11 cm and 22.5 cm (for external equipment) - TGS NN medium-long cab with rear window - Wheelbase 3,900 mm - Euro 6 e engine - 4x4 drive - Front axle with planetary reduction, driven, engageable - High ground clearance design - Differential lock on front and rear axle - Meiller 3-way tipper approx. 4.80 m x 2.42 m x 0.60 m high - Front panel 0.80 m high - Drop sides M-Jet, steel HB 450, 2.5 mm - Floor of the platform made of HB 400 steel, 4 mm - Fully retractable lashing eyes in the platform floor - Side panels of tipping bridge swinging and foldable, deep latches - Rear tipping panel swinging with automatic lock - MAN G172 transfer case with road and off-road gear - MAN TipMatic 12.26 OD - MAN Idle Speed Driving transmission function - MAN TipMatic Efficiency program, up to 70,000 kg - MAN TipMatic Offroad program, up to 70,000 kg - MAN TipMatic Manoeuvre program, shunting mode - Air conditioning (Climatronic) - Additional water heater, 4 kW - Towing jaw Ringfeder type RF40/G150A with air connections - Tipper hydraulics connection at the rear - Front axle on parabolic spring, rear axle air-suspended - Front axle rated 9 t, rear axle rated 13 t - Stabilizer for front and rear axle - MAN Comfort Steering - MAN EasyStart hill-holder - Emergency brake assist - Lane Departure Warning (LDW) - EBS, ASR, ESP Nodpfx Asyv Tugedtocr - ABS Offroad with additional off-road logic - Cruise control - MAN EVBec high-performance engine brake, adjustable - 390 liter aluminium tank on the right side - Sun visor - 2 rotating beacons and 2 work lights - Tool box in the cab - Reverse warning alarm, acoustic, deactivatable in reverse gear - Rear view camera - Multifunction steering wheel - MAN EasyControl control panel; 2 functions can be controlled externally when door is open - Electrically adjustable and heated exterior mirrors - Electric windows - MAN Media System Advanced 7 inch - MAN Sound System - Smartphone integration - Air-suspended driver's comfort seat with lumbar support, shoulder adjustment, and heating - Comfort quality seat covers Municipal new vehicle with day registration on 02.12.2025 Archive images shown Net price plus 19% VAT. Attractive financing options available on request. All information provided without guarantee. Subject to errors and prior sale. Internal vehicle number: 2517

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Ncsdpfx Adomhhypjter - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Ncodpfsmhh Dhsx Adter The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Nodsmhh Dzopfx Adtocr - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Ncodpfx Ademhhx Ijtsr According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Njdpfjmhhyaex Adtocr We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) Ncsdpfx Adeh Ek Daetjr - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Ncjdpfsmhh Anjx Adtsr Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. Ncjdpfsmhhf Sjx Adter According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Nedpfx Ajmhhl Hedtocr 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: Ncsdpfemidyfjx Adtsr 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles Nedpfx Asmkixwedtocr - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Nedpfx Ajmhh Dtedtscr When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: Nedeymlt Iepfx Adtjcr 01x Pallet rack beam, used Material color: RAL 1007 Daffodil Yellow Box profile: 80 x 50 mm Beam type: AUF'B'H0488 Design: End beam Bracket: 4 HK (hooks) Clear width: 1,350 mm 02x Locking pins, used Finish: Fully galvanized For securing the cross beams To prevent unintentional lifting Note: Suitable for accommodating horizontal braces. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any transportation or shipping of the item is subject to additional costs, which can be requested from us separately depending on the place of delivery and/or scope of delivery.

Condition: new, For sale: high-quality compensation (flexible) hose by BOA, made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN65 Length: 2000 mm Operating pressure: PN16 Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Application: industrial installations water, gas, and steam systems compensation for vibrations and thermal expansion Ncsdoyzi Hvepfx Adtsr protection of pumps, valves, and pipelines 📦 Condition: New – old stock (NOS) Possible minor traces of storage (visible in the photos). Unused and in full working condition. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction vibration and noise reduction 📸 Included: Exactly what is shown in the photos.

Condition: new, For sale: high-quality BOA compensating (flexible) hose made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN50 Length: 1100 mm Working pressure: PN16 Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Applications: industrial installations water and gas systems heating and steam systems compensation of vibrations and thermal expansions protection of pumps and fittings 📦 Condition: New – old stock (NOS) Possible minor storage marks (visible in the photos). Ncodsyzixlepfx Adter Product fully functional, unused. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction reduction of vibration and noise in the installation 📸 Included in the offer: Exactly what is shown in the photos.

Condition: new, For sale: High-quality steel compensator (compensating hose / Ringwellschlauch) from the renowned brand BOA, designed for industrial applications. This component is used for: - compensation of thermal expansion - vibration and noise damping - reduction of stresses in piping systems Manufactured from stainless steel 1.4404 (INOX), it is perfectly suited for demanding operating conditions (water, gas, industrial, and process installations). Njdpfeyzirxsx Adtecr ⚙️ Technical Specifications Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure rating: PN16 Material: stainless steel 1.4404 (INOX) Type: compensating hose / steel compensator Connections: flanged Construction: corrugated hose with stainless steel braid Standards: ISO 10380 / DIN 📏 Dimensions Approx. internal diameter: 125 mm Total length: approx. 1500 mm ✅ Benefits ✔ reputable manufacturer BOA ✔ excellent corrosion resistance ✔ long service life ✔ vibration and stress damping ✔ flexible design ✔ fast installation (flanged) 📦 Scope of delivery 1x compensator DN125 (as shown in the photos)

Condition: good (used), Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: 01x pallet rack beam, used Material color: RAL 1007 daffodil yellow Box profile: 80 x 50 mm Beam type: AUF'B'H0488 Connector: 4-hook (claw) Clear width: 1,350 mm 02x safety pins, used Version: fully galvanized For securing the cross beams To prevent unintentional lifting Note: Suitable for accommodating bracing in a horizontal direction Your contacts in our company: Mr. Andre Evering Njdoymffqspfx Adtecr Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipment of this item is subject to additional costs, which can be provided separately depending on the place of delivery and scope of delivery.

Condition: good (used), Technical data for the pallet rack beam: Racking system manufacturer: Jungheinrich Type: MPB Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 1007 Daffodil Yellow Box profile: 80 x 50 mm Beam type: AUF'B'E0488 Connector: 4 HK (hooks) Clear span: 2,700 mm Maximum load per pair of beams: 1,600 kg, with evenly distributed load. 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams To prevent unintentional removal Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Ncedpfeymdaasx Adtor General information about the item: This item is offered for collection only. Should additional transport or shipping be required, this will incur extra costs, which can be provided separately depending on the delivery location and scope. Please contact us for a quote.

Condition: good (used), Technical Specifications for Pallet Rack Beam: Racking System: Jungheinrich Type: MPB Included in delivery: 01x Pallet rack beam, used Color: RAL 1007 Daffodil Yellow Box profile: 125 x 50 mm Beam type: AUF'B'E 0485|15 Connector: 4 HK (hooks) Clear width: 2,700 mm 02x Safety pins, new Design: fully galvanized For securing the crossbeams Protection against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Njdpfxoyl Tygj Adtecr Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Transportation or shipping of this item is possible at additional cost, which can be quoted separately depending on the delivery location and scope of delivery.