Used Dumeta D-Chgk-20-Dpu for sale (65,107)

Condition: new, clamping range of chuck 120 - 380 mm height 95 mm daylight 170 mm external diameter Futter 400 mm external diameter Spannhebel 600 mm weight 26 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. Bsdsfv Awtjpfx Am Tjlk • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck.

Condition: new, clamping range of chuck 200 - 500 mm height 110 mm daylight 240 mm external diameter Futter 320 mm external diameter Spannhebel 700 mm weight 56 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. Bedpofv Awwefx Am Telk

Condition: new, weight max. 10 t workpiece diameter 320 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min Bedpfx Aofv A Dcjm Tjlk total power requirement 1,1 kW

Condition: new, weight max. 60 t workpiece diameter 750 - 5000 mm drum diameter 480 x 180 mm feed 100 - 1000 mm/min Bjdefv A Dnjpfx Am Tjlk total power requirement 2 x 2,2 kW

Condition: new, weight max. 100 t workpiece diameter 1000 - 6300 mm drum diameter 500 x 240 mm feed 100 - 1000 mm/min Bedpfxefv A Dvj Am Tslk total power requirement 2 x 3 kW

Condition: new, weight max. 10 t workpiece diameter 320 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min Blsdpfx Aefv A D Ism Tsk total power requirement 1,1 kW

Condition: new, weight max. 40 t workpiece diameter 600 - 4500 mm drum diameter 400 x 160 mm Blodpfofv A Eaox Am Tsk feed 100 - 1000 mm/min total power requirement 3 kW

Condition: new, weight max. 80 t Bljdpfxefv A Ehe Am Tok workpiece diameter 850 - 5500 mm drum diameter 450 x 240 mm feed 100 - 1000 mm/min total power requirement 7,5 kW

Condition: new, weight max. 100 t workpiece diameter 1000 - 6300 mm drum diameter 500 x 240 mm feed 100 - 1000 mm/min total power requirement 7,5 kW Bljdofv A Elepfx Am Tok

Condition: new, weight max. 80 t workpiece diameter 850 - 5500 mm drum diameter 450 x 240 mm Bodefv A Dropfx Am Tslk feed 100 - 1000 mm/min total power requirement 2 x 3 kW

Condition: new, weight max. 150 t Blodjfv A Dyepfx Am Tok workpiece diameter 1000 - 6300 mm drum diameter 500 x 300 mm feed 100 - 1000 mm/min total power requirement 8 kW

Condition: new, weight max. 40 t workpiece diameter 600 - 4500 mm drum diameter 400 x 160 mm feed 100 - 1000 mm/min total power requirement 3 kW Bodpfx Amsfv A Dkj Tjlk

Condition: new, weight max. 5 t workpiece diameter 250 - 2500 mm drum diameter 250 x 100 mm feed 100 - 1000 mm/min Bledpfx Aofv A D Dsm Tsk total power requirement 0,75 kW

Condition: new, weight max. 60 t workpiece diameter 750 - 5000 mm drum diameter 450 x 180 mm Bodpfx Asfv A Edsm Tjlk feed 100 - 1000 mm/min total power requirement 5 kW

Condition: new, clamping range of chuck 80 - 280 mm height 67,5 mm daylight 100 mm external diameter Futter 300 mm external diameter Spannhebel 480 mm Bsdpfx Aofv Awpjm Tjlk weight 13 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,239 h, load capacity: 2,000 kg, lifting height: 4,600 mm, free lift: 1,600 mm, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! Includes a new safety inspection! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,600 mm Free lift: 1,600 mm Load center: 500 mm Fork length: 1,200 mm MACHINE DETAILS Fuel type: Diesel Mast type: Triplex mast with full free lift Transmission: Automatic Additional hydraulics: 1 additional hydraulic circuit (ZH2) with quick coupling Controls: Dual pedal control Front tires: Superelastic tires, black, new Rear tires: Superelastic tires, black, new Overall height: 2,150 mm Total height: 2,100 mm Unladen weight: 3,800 kg Operating hours: 7,239 h Water pump: replaced at 7,237 h Bedpezmumisfx Am Tolk Timing belt: replaced at 7,237 h Battery: serviced EQUIPMENT Cabin with heater Seat heating Grammer seat Side shifter Additional hydraulics with quick coupling Pallet forks Trailer hitch Lighting Work lights front and rear Front protection guard Overhead guard Clamp

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: Greif, double grinding wheel type D 20/4 -Grinding discs: max. Ø 250 mm -Motor power: 0.37 kW -Speed: 1400 rpm -Operating voltage: 220/380 volts Bodjv Hawqepfx Am Tslk -Dimensions: 500/310/H315 mm -Weight: 40 kg

Condition: used, Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg Bljdjdkf I Tjpfx Am Tok

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer Bljdpfxefitfle Am Tjk -Three phase transformer -Type: D 32/20 50/60 Hz 6000 VA -Primary: 3x 400 V -Secondary I: 1x 110 V 6 A -Secondary II: 1x 230 V 6 A -Secondary III: 3x 18 V 10 A -Secondary IV: 3x 66 V 30 A -Dimensions: 420/175/H430 mm -Weight: 80 kg

Condition: excellent (used), Double grinding wheel stand with coolant hoses and coolant collection basin Maximum grinding wheel diameter: 200 mm Rotational speed: 3,000 rpm Bodezfii Ajpfx Am Tslk Drive power: 0.55 kW Coolant tank, pump and hoses are missing. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, Emcomat Emco EM20D lathe with guide and draw spindle, manufactured in 1993. Year of manufacture: 1993 Center height: 200 mm Turning length: 1000 mm The machine is in working order. Bsdpszivhmjfx Am Tjlk If you are interested, we would be happy to provide you with information about other machines we have in stock. You are welcome to inspect the machine at our premises after prior arrangement.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 9,330 h, load capacity: 2,000 kg, lifting height: 3,750 mm, fuel type: diesel, mast type: telescopic, construction height: 2,470 mm, fork length: 1,600 mm, drive type: Diesel, Diesel forklift Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Normal Front tire type: Pneumatic Bedpfx Amjziq Twe Tjlk Rear tire type: Pneumatic Side shifter, fork positioner 3rd valve, 4th valve

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Bjdpfxehx Elfs Am Tjlk Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: used, Ferwood Code: RU0001121 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Blodeu U D N Ujpfx Am Tok

Condition: reconditioned (used), Product information "Guide and lead screw lathe Kern D 20 A" Guide and lead screw lathe Kern Type / Model D 20 A Condition: Reconditioned Technical data: Distance between centers: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (12): 31.5 - 1400 rpm Motor power: 4 kW Quill stroke: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: Bsdpfx Amoy H Iqwo Tslk - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Rotating center