Used Durendus Assembly Press for sale (15,678)

Condition: new, pressure 1,5 kN stroke 40 mm throat 70 mm Working height from to 75 - 170 mm table surface area 115 x 70 mm weight of the machine ca. 11 Kg dimensions 115 x 175 x 290 mm Hand presses with rack HZ 150 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Hnedofv Av Djpfx Andou Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life Hodpfxofv Av Ss Andonu • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: excellent (used), Year of construction: 1996, Excentrical press: Capacity: 100 ton Clutch: airclutch Gooseneck depth: 340 mm Slide adjustment: 10 > 130 mm Command: 400 mm Max distance plate -- slider: 300 mm Dimensions of the table: 950 x 630 mm Dia of passage in the table: 200 mm Dimension sole of the coul. (L x W): 560 x 320 mm Hsdpfx Anehtiwhjdonu Variable stroke: 10 > 130 mm Motor power: 8.5kW Length G -- D: 1500 mm Width Front -- Rear: 2380 mm Height: 2800mm Weight: 9.5 ton

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (grain size < 18 mm) - Material must be pure, with an ash content of less than 1% ATRO Note regarding: sand, stones, and minerals - Material is compacted by means of compression tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Options available at an additional cost: Plant construction / mütek system technology: - mütek shredder MRZ crushing technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve airlock Hnodjfbb Arepfx Andou - Transport screws - Silos - Control system connections of all kinds - Semi-automatic packaging technology + 24-hour operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density of up to ≥ 1 kg/l possible *Details after testing Operating principle: The machine has a silo with an agitator. In each of the 4 corners of the storage silo, there is a vertical screw that compresses the material downwards into the compression chamber. The machine operates with two cylinders, each of which compresses in two directions (either while the cylinder moves forward or backward). This results in 4 briquette outlets, each with 6 individual briquettes. *ideal for the automatic feeding of the heating boiler Format Ø 30 mm Throughput of up to a maximum of 310 kg/h Motor power: approx. 29 kW (total); approx. 30% less in continuous operation Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format enables the firing of industrial furnaces by means of screw feed Fully automatic 24-hour operation possible High energy efficiency Briquettes/pellets with consistently high quality and density For automatic feeding into industrial furnaces Small to medium quantities of wood chips, which are produced in the processing industry of various materials (especially wood, biomass, etc.), can be optimally compressed. The small Ø 30mm format represents an attractive alternative. Unlike our conventional briquettes, these can be automatically fed into industrial furnaces. In addition to wood, various other materials can also be easily processed (various biomass and agar-based materials).

Year of construction: 2022, condition: new, Pressure: 400 t table length: 3000 mm table width: 2000 mm table load max .: 50 t distance between the work tables : min. 400 / max. 2800 mm Hnjdefn Efpepfx Andju top tool foldable: 180 degrees Dimensions L x W x H: 7600 × 5670 × 7850 mm Total weight (without operating materials): 85 t Motor power: 44 kW

Condition: excellent (used), Ice cream press, shaper, spaghetti ice cream press, ice cream press cup -made of stainless steel tube: Ø 79 mm -Shape: Spaghetti 42 pieces available -Holes: Ø 3 mm -Shape: wide pasta, tagliatelle, lasagne, 24 pieces available -Slot: 4 x 49 mm Hnedpjc H S D Iefx Andsu -Price per piece -External dimensions: 160/79/H78 mm -Weight: 0.45kg

Condition: ready for operation (used), Year of construction: 1982, machine/vehicle number: 10710, functionality: fully functional, HYDRAULIC PRESS BRAKE LVD PPN 300/30 Year of manufacture: 1982 Serial number: 16270 TECHNICAL SPECIFICATIONS Maximum capacity: 3000 kN Working length: 3000 mm Hodpjzzxgcsfx Andsnu Distance between uprights: 2550 mm Ram stroke: 250 mm Maximum distance between ram and table: 500 mm Gap: 300 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 8.8 mm/s Return speed: 96 mm/s Main engine: 22 kW Weight: 16000 kg NC controller: ELGO X-Y  Solid back gauge with range on X axis: 600 mm  2 fingers on back gauge  2 front supports of 1000 mm TOOLING: a. Multi-V M130, Length: 3050 mm b. Toolholder LVD Classic 15 to LVD Classic 15, Length: 3050 mm c. Straight top tool R15 H130 86°, Length: 3050 mm d. Gooseneck top tool D15 H130 86°, Length: 3050 mm e. Straight top tool R15 H130 26°, Length: 3050 mm

Condition: good (used), complete set of flat die tooling Type: 20.305 Hnodozg Urfspfx Andsu V12 - 26 degrees 3 x 835 mm 2 x 415 mm Total length: 3335 mm New price (gross): € 3,862,-

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool Hnodpfx Anjzulx Eodou

Condition: good (used), Year of construction: 1991, Used press brake from Safan Type CNCS 110 4300 Capacity 4300 x 110 tons Control system updated, ESA CNC control Y1, Y2 and X axes CNC controlled Equipped with a flat-bedding system / bending / hemming function Includes a set of tools Hnodpfxeza T Dbs Andju

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6366 1 x Zumex cold-press commercial juicer. Complete with juice bags, alternative blades and all the necessary accessories. Hnsdpfx Anoyh I Tkodeu Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products. Manufacturer - Zumex Food Engineering. Model - MASTERY. Date of manufacture - 2021. The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Production capacity - from 30 L/h up to 110 L/H. Deposit capacity - 3 litres. Touch Control Display - 4.3" Colour. Pression Power - 11,000 kg. Electrical requirements - 220-240 V / 50 hz / 1 phase.

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec Hnodeyfwxtjpfx Andeu speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: used, Year of construction: 1986, Gebruikte conventionele kantbank van 4 meter Type: PPH 40160 Capaciteit: 4100 x 160 ton Hsdpfx Aneyu Stdedsnu Elektrische achterasverstelling Elektrische diepteverstelling 1 set gereedschap

Condition: used, Year of construction: 1970, functionality: fully functional, pressing force: 100 t, overall weight: 4,000 kg, pressure 40 t stroke 150 mm serial number 100091 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t Hjdpfx Aovxltbjndsnu safety light frame ja bei beiden

Condition: used, Year of construction: 1993, Pressing area: 2200 x 1100 mm. Plates are gold-anodized and fitted with a safety retaining cord. Connection value: 6 kW. Nominal volume: 140 l. Permissible operating pressure: 6 bar. Nominal operating current: 15 amps. Permissible operating temperature: 100° C. Storage location: Nattheim. Hnodpfxoz Ng Sbj Andju

Condition: used, Year of construction: 2011, Pneumohydraulic press Manufacturer: TOX Type: EMB 075.001.A.001 Year of manufacture: 2011 Hnedpfx Aez H I I Rendou Pressing force: 750 kN (equivalent to approximately 75 tons of pressing force) Total stroke: 200 mm Working stroke: 10 mm Machine weight (without tooling): 4,150 kg 51026ä

Condition: ready for operation (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, No minimum price – guaranteed sale to the highest bidder! Hnodpfx Aez Iluqsndeu Submitting a bid obligates you to collect the item within the period of November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Closing force: 400 kN Table dimensions: 670 × 570 m MACHINE DETAILS Operating voltage: 380/260 V Frequency: 50 Hz Rated current: 25 A Power: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,900 x 3,200 mm Weight: 10,000 kg Recorded operating hours: 376 h External reference: Alesco - Lot 76

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_7, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Hedpoz H Txuefx Andsnu Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_20250010, functionality: fully functional, operating hours: 300 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Hnodpfsz H Tx Ijx Andeu Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: used, Year of construction: 2018, pressing force: 80 t, filling opening width: 1,040 mm, filling opening length: 1,110 mm, bale length: 1,200 mm, bale width: 1,120 mm, bale height: 1,120 mm, bale weight: 600 kg, total width: 1,830 mm, total height: 2,620 mm, total length: 4,200 mm, type of input current: three-phase, input voltage: 400 V, input current: 32 A, overall weight: 8,000 kg, input frequency: 50 Hz, DIXI 80 SLD Horizontal Baler – Year of Manufacture 2018 Used, fully functional DIXI 80 SLD horizontal baler for the economical compaction of cardboard, paper, and comparable recyclable materials. Hnodpfx Ajz Hqwbendsu Technical data: Manufacturer: DIXI Model: 80 SLD Year of manufacture: 2018 Pressing force: 80 t Drive power: 11 kW Connection: 400 V / 32 A Feed opening: approx. 1,040 x 1,110 mm Bale size: approx. 1,120 x 1,120 x 1,200 mm Bale weight: approx. 500–600 kg, depending on the material Press cycle: approx. 35 seconds Throughput: up to approx. 1,000 kg/h, depending on the material Machine weight: approx. 8,000 kg Machine dimensions: approx. 4,200 x 1,830 x 2,620 mm (L x W x H) The machine is in used, fully functional condition. All information is provided without warranty. Subject to prior sale.

Condition: used, Year of construction: 1970, colour units 1 max. printing speed sheets 4000 /h max. paper size 73x104 cm Hnedpfjz I Ubyjx Andou

Condition: good (used), Year of construction: 1991, machine/vehicle number: P 10106, Offer 26338 Technical data: - Max. working length: 3340 mm - Stand opening: 2600 mm - Max. pressing force: 100 t - Overhang: 400 mm - Max. stroke: 100 mm - Max. installation height: 370 mm - Table height (approx.): 960 mm - Approach speed / rapid traverse: 85 mm/s - Pressing speed: 10 mm/s Hnedez R Rkfopfx Andeu - Retraction speed: 80 mm/s - Drive power: 9.5 kW - Space requirement (approx.): W 3500 x H 2350 x D 1950 mm - Weight (approx.): 6.8 t - Including: - CNC control system DELEM DA 58 - Rear stop 0 - 600 mm

Condition: like new (used), Year of construction: 2019, Mossini Transfer Press PDM/4BLD Pressing force: 2,000 kN Table area: 6,000 x 2,500 mm Slide area: 6,000 x 2,500 mm Stroke height: 900 mm Strokes per minute: 10 - 25 1/min Slide adjustment: 400 mm Overall height: 1,270 mm TOTAL STROKES: 1,000,000 strokes NORDA Transfer X-axis travel: 0 - 1,200 mm Y-axis travel: 0 - 1,125 mm Z-axis travel: 350 mm Max. transport weight: 200 kg Hnsdpfsz Szrzjx Andeu Mill tool strip system Strip width max. up to 1,850 mm Strip thickness: 0.5 - 3.0 mm Coil load capacity: 24,000 kg

Condition: excellent (used), Year of construction: 2008, Mossini press Servo drive Pressing force 2,000 kN Hjdpfxjz Sz Sbe Andenu Stroke adjustment 20 - 100 mm Stroke rate 30 - 90 strokes/min Ram adjustment 100 mm Tool installation height 455 mm Year of manufacture 2008 Includes Kohler conveyor system.

Condition: good (used), Schuler PE4s 50/800 high-speed press Hnsdpfx Anegryc Nsdeu Manufacturer: Schuler Type: PE4s 50/800 61/21 600/3 Press force: 50 tons Stroke: 800 mm Strokes per minute: 125-300 Ram stroke: 40 mm Kohler unwinding reel 500.1 M More items – new and used – can be found in our shop! International shipping costs available upon request!