Press brake

Haco PPH 40160

Year of construction: 1979, condition: used, throat: 22/29 mm drive motor: bei 380 V ca. 0,55 kW space needed: 450 x 500 x 560 mm weight: ca. 6,5 kg Pedjzif Sopfx Ag Tjgn pressure power: 30 kN

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T Pgsdpfxewtmi Ee Ag Ten With mobile blade rack

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Year of construction 1990+ retrofit Stand width 2600 mm Pgodjw Hx Rzepfx Ag Ten Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Pgedpst I D U Ejfx Ag Tjn Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: refurbished (used), Year of construction: 1996, machine/vehicle number: 02/510/004, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 63 A, input frequency: 60 Hz, stroke length: 265 mm, table height: 800 mm, total length: 2,670 mm, total width: 4,100 mm, total height: 2,800 mm, overall weight: 22,000 kg, travel distance X-axis: 500 mm, controller manufacturer: Cybelec, controller model: Visitouch 19" 2D, working width: 4,100 mm, bending force (max.): 225 t, back gauge speed R-axis: 100 mm/s, control type: CNC control, degree of automation: automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, foot remote control, Pressbrake fully updated with a new numerical control 2D from Cybelec Switzerland Pgjdow I A Ncopfx Ag Tjn

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady Pgedpexwp Ebofx Ag Ton

Year of construction: 2015, condition: ready for operation (used), A coolable (isolated) Fabdec milk tank is available. Volume: 10000l, length: approx. 3000mm, diameter: approx. 2200mm. The tank is equipped with an integrated agitator and a spray system for CIP cleaning. A cooling unit is not included. Pgsdpot Hxdlefx Ag Ten

Condition: good (used), Year of construction: 2006, CNC Multitron PS 10 Control: Column-guided Material roller conveyor on both sides 4000 mm / 1000 mm Cutting speed 15 - 105 m / min Pgedpfxov I Rfuj Ag Tjn Technical details Cutting diameter 320 mm Saw blade length 3280 mm Cutting width 320 mm Total power requirement 3.8 kW Machine weight approx. 115

Condition: good (used), Year of construction: 2018, machine/vehicle number: 68892, Offer 26014 Hydraulic, Two-Column Guided Mitre Band Saw Automatic Machine Technical Data: - Automatic work cycle for cutting operation, hydraulic lifting / lowering of the saw frame, manual mitre adjustment with hydraulic clamping - Automatic material feed system, motorized mitre adjustment - Saw band dimensions: 4400 x 34 x 1.1 mm - Cutting speed, infinitely variable: 15 - 150 m/min - Cutting pressure regulation, infinitely variable: 10 - 15 bar - Lowering speed: 0 - 300 mm/min - Cutting range: - 30° to 90° - at 90° round: 335 mm - square-flat: 500 x 335 mm - at 45° round: 330 mm - square-upright: 320 x 335 mm - at 30° square-upright: 170 x 335 mm - Material feed automaton Psdpfeytn Dijx Ag Togn - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 6.5 kW - Required space (approx.): W 2300 x H 1750 x D 2200 mm - Weight (approx.): 1800 kg

Condition: good (used), Year of construction: 1989, machine/vehicle number: 51756, Offer 25200 Technical data: - Press force: 200 t - Working width: 3100 mm - Distance between uprights: 2600 mm - Table width: 180 mm - Throat depth: 300 mm - Installation height: 450 mm - Approach speed: 80 mm/sec - Working speed: 9 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustment range of fixed stops: 120 mm Pgjdpfjwvipgsx Ag Ton - Drive: 400 V / 18.7 kW - Space requirement approx.: W 3300 x H 2950 x D 1900 mm - Weight approx.: 10,500 kg - Equipped with: - Adjustment of press depth and pressing force - Motorized back gauge with handwheel for fine adjustment - 4-way universal die, pointed tool - Two-hand control panel, foot switch,