Used Erhardt & Leimer Edge Guide for sale (8,070)

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with HF motor 0.35 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : Iedpfx Ansd R U Ags Nstk →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surf

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: Solomat, Solomat / Donati / Demag hall crane, portal crane, bridge crane including floor-mounted guide rails Dimensions of the steel structure: approximately 26 x 13m with 1x Demag bridge crane 2.5t - gauge 12.9m Useful load/lifting capacity: 2000KG - 2t Technical data of the system: Length of guide rails including power supply: approximately 26m Overall width, outer edge: approximately 13.1m Total crane height: approximately 3.9m Top of bridge: approximately 3.9m Bottom of bridge: approximately 3.6m Hook height: approximately 3m Gauge: 12.9m Crane girder: HEA340 Carriages: HEA180 The system will be delivered complete: - 1 bridge with a 2000kg Donati chain hoist with floor control including carriages and steel structure - Control system including Demag DRS 125 wheel blocks including drive - Guide rails and power supply The crane is dismantled and immediately available Inspection record and CE certification are available The location of the item is 75053 Gondelsheim Very good condition, see pictures. Hardly any operating hours! Shipping by freight forwarder or collection only by prior arrangement. Itodpezhik Esfx An Njk

Condition: not inspected (used), Year of construction: 2006, for coil and strip material from 0.4 - 15 mm max. panel thickness 60 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication idler roller for shortest workpiece sequence Ijdpfx Anoy Ici Re Netk safety/soundproof hoods central dust extraction connection, D = 160 mm, edge trimming units, D = 120 mm chip collection box, D = 100 mm equipped with: > Edge trimming units 1961 incl. DIA cutter > Memory-programmable screen control Edgecontrol > Automatic edge magazine 1901 for coil and strip material > Gluing station 1905 for cartridges + granules incl. sensing nozzle > Pressing unit 1926, motor-driven/pneumatic > Cutting unit 1819, motor-driven > Flush trimming unit 1962 > Multi-function trimming unit 1966 with various radii/chamfers > Multi-radius draw blade unit 1965 with various radii > Corner copying unit 1983, R = 2 mm incl. one interchangeable motor, R = 1 mm > Straight draw blade 1964, controlled by program > Deburring unit 1944, controlled by immersion > Spray device 1856 at the infeed and outfeed > Belt bridge > stepless feed rate up to 24 m/min > Shear arm > motor-driven bridge adjustment > infeed guide rail, motor-driven adjustable Length 8200 mm Width 1300 mm Height 2000 mm Weight 3300 kg

Condition: used, Power Control Pc 22 Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to mt / min 24 Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Side roller conveyor with idle wheels for panel support Grinding group Itedpfx Ajgiyn Ion Nsk Lamps to heat the edge of the panel 6-position reel holder magazine with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Overlapping trimming unit with 2 motors Gluing unit with 2 tilting motors electronically adjustable by C.N. Multifunction 4-motor rounding unit (gleaner + rounder) with numerical control adjustment in automatic Free space for the possible insertion of another work group Edge scraper group Oscillating brush group

Condition: ready for operation (used), functionality: fully functional, BEHR ST 150 / Vertical slotting machine with swiveling head - Stroke up to max. 175 mm - Head tilting in both directions, 5-8 degrees each - Table height / lower edge of ram guide: 260 mm - Rotary table diameter: 340 mm - Table longitudinal travel: 320 mm - 3 stroke speeds: 17-54-108 strokes per minute - Maximum slot width up to 26 mm - Feed in X/Y axes, speed adjustable - Rotary table adjustment manual - Three-jaw chuck Dimensions (LxWxH): 1.5x1.2x2 meters / Weight: 1600 kg Ijdpfx Ajy R S Rvon Nstk Errors and omissions excepted.

Year of construction: 2018, condition: used, functionality: unexamined, Sasso K500 CNC bridge saw (2018) 3 axis Isdjzc Rgrepfx An Njtk Also available from the same location - Bellani Modulo edge polisher (2010)

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Iedpoznucysfx An Netk Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, functionality: fully functional, Equipment: documentation/manual, 2021 Star SR32 JII Type A (15,000 hours) 4m FMB Turbo 3-36, Hydrajet UB20 High Pressure Coolant, LNS Swarf Conveyor, FireTrace Suppression, JBS Guide Bush System, Fully inspected & serviced, 30 Day Warranty # Star SR-32JII CNC Sliding Head Lathe Machine Hours: Approx. 15,000 hours Maximum Machining Diameter: Ø32 mm standard / Ø34 mm optional CNC Control: Fanuc 32i-B ## Machine Configuration * Twin-spindle CNC sliding head lathe * Main spindle and sub-spindle * Main and sub-spindle full C-axis control Isdozuxfrspfx An Notk * Gang-type tooling system * Cross-working driven tooling * Back-working tooling * X1, Y1, Z1, C1, X2, Z2 and C2 controlled axes * Type B configuration additionally incorporates Y2 control on the back-working unit ## Main Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 7.5 kW continuous / 11 kW short-time rating * Maximum headstock stroke: 320 mm * Full C-axis contouring capability ## Sub-Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 3.7 kW continuous / 5.5 kW short-time rating * Full C-axis contouring capability * Maximum chucking diameter: Ø32 mm / Ø34 mm optional ## Main Tooling * 6 × turning tool positions * Tool size: 16 mm square * 5-spindle sleeve holder * Maximum drilling capacity: Ø13 mm * Maximum tapping capacity: M12 × P1.75 ## Cross-Working / Driven Tooling Configuration options include: * 3 × ER20 cross-milling positions + 2 cartridge-type positions * Or 6 × ER16 cross-milling positions * Maximum milling capacity: Ø10 mm * Maximum driven tapping capacity: M8 × P1.25 * Cross-milling spindle speed: 6,000 rpm * Cartridge-type driven tooling speed: up to 8,000 rpm * Driven-tool motor: 2.2 kW continuous / 3.0 kW short-time rating ## Back-Working * Maximum chucking diameter: Ø32 mm / Ø34 mm optional * Maximum front ejection length: 125 mm * Maximum projecting component length: 45 mm * Back-working tool positions: * 6 positions – Type A * 8 positions – Type B * Stationary drilling capacity: Ø13 mm * Driven drilling capacity: Ø8 mm * Stationary tapping capacity: M10 × P1.5 * Driven tapping capacity: M6 × P1.0 * Maximum back-working driven-tool speed: 6,000 rpm ## Rapid Traverse * X1 / X2 / Y1 / Z1 / Z2: 35 m/min * Y2: 24 m/min on applicable Type B machines ## Ancillary Equipment Included * 4 metre FMB Turbo 3-36 Magazine Bar Feeder * Hydrajet UB20 High-Pressure Coolant System * LNS Swarf Conveyor * FireTrace Automatic Fire Suppression System * JBS Guide Bush System ## Machine Condition & Support * Approx. 15,000 operating hours * Fully inspected and serviced * Supplied ready for production * 30 Day Warranty * Warranty valid within the UK only ## General Specification * Coolant tank capacity: 255 litres * Approximate machine dimensions: 2,690 × 1,345 × 1,780 mm * Approximate machine weight: 4,100 kg * Power requirement: 8.8 kVA * Maximum sound pressure level: 77 dB

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Itjdpfevvkfdjx An Njk

Condition: used, Year of construction: 2010, functionality: fully functional, Single-sided edge banding machine in full configuration, incl. a total of 3 interchangeable glue application units, 1 of which for PUR adhesive Material dimensions: Roll material: - Paper and plastic edges: 0.3 - 3.0 mm - Veneer edges: 0.5 - 3.0 mm - Strips: 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine’s equipment: Infeed guide rail, automatic adjustment via program Release agent application Joint trimming unit with 2 motors, each 4 kW Blow-off nozzle for removing loose particles Gluing unit with 1.8 L glue application, with QUICK-LOCK Itsdpfxeybbays An Nok with single roll/strip magazine 1 main pressure roller and 3 follow-up pressure rollers Automatic pressure zone adjustment via program End trimming unit with 2 motors, 660 W, swiveling 0 to 8 degrees Corner rounding / copy milling unit with 2 motors, 180 W and 2 motors, 400 W Max. workpiece thickness 60 mm Max. feed speed 20 m/min Automatic adjustment via program Profile scraping unit Glue joint scraping unit Cleaning agent application Buffing unit with 2 motors, 180 W Control system ICOS open TS, PC-based

Condition: good (used), Code: 0015 Brand: FRAVOL - ITALY Model: RAPID RX 700 - CE Standard Automatic electronic edge bander for EVA - PUR - POLYURETHANE glue, with grinding unit for applying Pvc, Abs , melamine , veneer , solid strip and roll edges, for joinery workshops, custom furniture, naval furniture, doors, panels, kitchen furniture, bathroom furniture - CE Standard Panel thickness min/max mm 10/120 Panel length min mm 140 Panel width min mm 60 Edge thickness mm 0,4 - 16 Variable feed 10-20 mt/min Automatic presser lift Itjdpfx Anjvutm Ij Nek Composition: Touch Screen electronic control 10,7" colour Controlled axis infeed guide Group 2 incoming grinders for perfect panel grinding - Motors Kw 2,2 - Rpm 6000 - Diamond tools mm 100 x 120 x 30 Infrared lamp 0-600 degrees - Watt 600 Cooling anti-adhesive spray system Edge height mm 120 Automatic edge loader Universal gluing unit with pre-melting unit for polyurethane glue and EVA glue - Quick release glue pot - Controlled axis pressers Roll edge cutting 3 mm Pvc/Abs Glue pot cleaning table End cutting unit with 2 tilting motors each 0,50 kW - 12000 rpm Tilting trimming unit with controlled axis - Motors Kw 1,1 - Rpm 12000 Rounding unit with 2 motors with controlled axis - Motors Kw 0,22 - Rpm 12000 Scraping unit with controlled axis Glue scraping unit Brush unit - Motors 0,18 Kw - Rpm 1400 Dryer unit 0-600° - 4000 watt Soundproof booth Fixed panel support roller conveyor Suction n° 7 inlets diameter 80 - N° 1 inlet diameter 120 Installed power Kw 22 Compressed air 6 bar Overall dimensions mm 6730 x 1500 x 1910 h Weight kg 2400

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) KITOTEC CT-12000-D is universal high-precision measuring device for all cases: suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. Included is Rollomatic Concentricity Pro with adapter plate. - Zoom system 12x with adapter 0,67x with angled optical system - attachment lense 0,5x - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms - back light, parallel with holder movable Itedpovi Enajfx An Nok blue for automatic measuring functions - measuring software Metric MT 9.02 - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Isdpfjzfi A Aex An Njtk Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: used, mileage: 362,000 km, power: 44 kW (59.82 HP), fuel type: diesel, gearing type: mechanical, first registration: 07/1960, color: beige, number of seats: 9, Equipment: air conditioning, Mercedes 0 319 "Samba" 2 x available 1 x beige green / 1 x beige red - Driver's seat plus tour guide seat - First row of seats / original double seat - Club corner for 5 persons - Roof edge glazing - Folding sunroof - Rear luggage compartment - Air conditioning - Refrigerator Length 4820 mm width 2080 mm height 2370 mm Itodjzuvd Ejpfx An Nek Permissible gross weight 3500 kg or 3600 kg. Registration as a passenger car with 3500 kg gross vehicle weight possible. - Rental for your event possible. Delivery throughout Europe with our. Car transporters possible. Vehicles have been rebuilt from scratch. 1 x year of construction 1962 and 1 x year of construction 1960 Net export possible. Price per piece 159.990.00 Euro incl. 19 % VAT. = 134.445.00 Euro net. We make Shipment worldwide.

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 5 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal ,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Itodjvwfmlopfx An Nok

Condition: like new (used), functionality: fully functional, power: 11 kW (14.96 HP), cutting height (max.): 115 mm, cutting width (max.): 4,200 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, SCHEER PA 7012PK – 4200 x 4200 mm Like-new, high-performance panel dividing system with postforming unit, head cutting saws, and vacuum loading system. LIKE NEW - FROM THE MANUFACTURER - 1 year warranty For sale is a powerful and extensively equipped SCHEER PA 7012PK panel dividing system with a cutting capacity of 4200 x 4200 mm. The system has been professionally overhauled and is ideally suited for industrial furniture and interior design companies with high demands for precision, performance and automation. Technical data Cutting length: 4,200 mm Cutting height: 115 mm Saw blade overhang: 135 mm Main saw motor: 11 kW Scoring saw motor: 2.2 kW Automatic cutting height adjustment Residual cuts up to 5 mm possible Hardened guides Automatic forward and backward movement of the saw unit Main and scoring saws with integrated extraction Fully automatic angle pressing device Material feed HP 5107-4200 Servo-driven material pusher Feed speed up to 25 m/min Return speed up to 50 m/min 7 retractable clamping fingers Closed Pertinax surface in the stop area Air cushion system instead of rollers Control & Software with integrated industrial PC. Highlights: SSD hard drive Linux operating system Network-enabled (LAN/WLAN) Remote maintenance via TeamViewer / Remote Desktop Graphical cutting plan display Multilingual user interface 17" flat-screen monitor in swiveling control panel Virtually unlimited cutting plan management Optimization software OPTIMIN The integrated cutting plan optimization enables the direct creation and calculation of optimized cutting plans on the machine. Bills of materials are entered and automatically converted into economical cutting layouts. Postforming unit Integrated postforming unit Material height up to 80 mm Lift table TE 5085-4200 Four-spindle lift table Can be loaded from three sides Table size: 4,200 x 2,200 mm Itedoza Eazjpfx An Njk Stack height up to 650 mm Motor-driven roller conveyors on the right and left Fully automatic alignment systems Longitudinal alignment WP 5035-4200 Automatic positioning Working area 2,000 – 4,200 mm Transverse alignment WP 5034-4200 Three alignment fingers Working area 1,200 – 2,200 mm Front tables Angle stop table HP 5094-2406 3 workpiece support tables HP 5095-2406 Pertinax supports Air cushion system LK 5162 for all front tables Head cutting saws Main head cutting saw KS 5000-4200 Fully automatic positioning Adjustment range 300 – 2,100 mm Extended travel up to 3,100 mm Power 7.5 kW Integrated top and bottom extraction Additional head cutting saw Manually adjustable Positioning 0 – 50 mm from the stop edge Power 7.5 kW Vacuum loading system TE 5088-4200 Additional pusher with integrated short-stroke vacuum loading system. The panels are automatically transferred from the lift table to the pre-stacking table and fed into the processing process. This enables short cycle times and a high degree of automation. Conclusion An extremely rare and fully equipped industrial panel dividing system with extensive automation, postforming equipment, double head cutting system and vacuum loading. Ideal for the furniture industry, shop fitting, interior design, as well as larger carpentry and joinery businesses. Machine available immediately – 1 year warranty.

Condition: good (used), Code: 0435 Brand: FELDER - AUSTRIA Model: G 560 - CE Standard Automatic edge bander with grinding units for applying wooden, abs, pvc, veneer edges to joinery, furniture, custom-made furnirture, panels, doors, kitchens and other items – CE Standard Technical data: Edge thickness 0,4–5 mm Min/max panel height 10/60 mm Workpiece feed speed 9 mt/min Configuration: Adjustable infeed guide Set of 2 diamond infeed grinding units for perfect panel grinding Tool diameter 60 mm Bore 25 Tool height 60 mm N° 4 cutting edges Rotation speed 12000 rpm Motor power 1,1 Kw each Gluing unit Pvc shears End cutting unit: Blade diameter 100 mm Bore 20 – Blade inclination 0-5°– Blade rotation speed 12000 rpm End trimming unit: Tool diameter 77 mm Bore 20 – Rotation speed 12000 rpm Edge scraper unit Glue scraper unit to remove any glue residue Touchscreen control panel Support table for large panels Itodpfx Aezkhlgen Nsk Soundproof protection cabin Suction inlets: 1 Ø 120 mm – 2 Ø 80 mm Compressed air 6–7 atm Overall dimensions mm 3200 x 900 x 1500 mm Weight kg 900

Condition: used, Year of construction: 2007, General Information • Machine type: Modular flexographic printing and converting press • Maximum printing width: 510 mm Printing Units Number of printing units: 3 Drive system: Dual drive per printing unit Printing technology: Flexographic Plate cylinder pitch: 1/8" Plate Cylinders (1/8") • 3 × Z88 • 3 × Z92 • 3 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 3 × Z140 Die-Cutting Units Number of die-cutting stations: 3 Counter-pressure cylinders: 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) Magnetic Cylinders (1/8") • 2 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 4 × Z140 • 3 × Z176 • 3 × Z184 • 2 × Z192 • 1 × Z222 Anilox Rollers Total anilox rollers: 13 Volumes (cm³/m²): 4.1 / 5.04 / 6 / 6 / 6.3 / 6.09 / 8 / 8.25 / 9.58 / 13 / 13.51 / 16.57 / 30 • 2 new anilox rollers included Coating & Special Units • Sleeve holders for varnishing: - 3 × sleeve holders Z88 - Including mounting station • Screen printing unit • Laminating station Drying Systems UV systems: 3 × UV units Uviterno, 240 W/cm NIR drying: 2 × NIR modules for water-based systems (Lambda Technology) Web Handling & Rewinding Grid winders: 2 × rail-mounted grid winders (up/down) Rewinder: Double-spindle rewinder for roll-to-roll operation Delivery: Conveyor belt for single labels Web cleaning system Complete set of non-stick rollers Corona & Web Guiding Corona treater: 2 kW (SIT) Itodpfsx Ngfljx An Nok Web guiding system: • Erhardt+Leimer (E+L) • 2 × ultrasonic sensors • 1 × line sensor Inspection & Register Control Video inspection system: E+L Elscan Register control: • Sensotec • Register control for 5 stations (3 printing + 2 die-cutting) Inserter control for pre-printed rolls

Condition: used, Year of construction: 2018, Transnorm belt conveyor GF 4080-1310-1200 RA1862 Technical data: Conveying length (NL): 4080 mm Framework width (NB): 1310 mm belt width (GuB): 1200 mm height (BH): 120 mm Side guides height: 100 mm Itsdpfxovu Ihmo An Nsk Drive: SEW Motor Electrical data: 50Hz V380-500, kW 0,55 Side guides on both sides: includet Abrasion edge occurred during testing, see photos. Base layer intact. Optionally available: Supports Frequency Converter Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Double end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor -1x motor: 1/1.5 kW 2670/5710 rpm at 50/100 Hz -1x motor: 5.5/8 kW 2870/5880 rpm at 50/100 Hz -Motor: mounted on guides -Motors: swiveling -Mill: with inserts Ijdpfx Anjb Uhrze Notk -Dimensions: 900/1100/H1000 mm -Weight 274 kg

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Large radial saw for cross-cutting and edging boards. Quick conversion between double mitre cuts or cross-cutting. Robust swivel arm made of cast iron with replaceable hex guides. Saw unit tiltable to both sides up to 45°. Cutting height at 90° max 640x20/610x60 mm Cutting height at 45° max 380 x 100 mm Cutting height at -45° max 330 x 100 mm Itedpfew I Utyex An Njk Cutting depth with motor at 0°/45°: 100/50 mm Saw blade diameter/bore: 350/30 mm Saw blade speed: 2800 rpm Table (LxW): 1675x1060 mm Motor 3 kW/400 V Weight: 220 kg Availability: short-term Storage location: Hochheim

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg Itodpfx Aeb A Nypon Njk

Condition: used, Year of construction: 2012, Used machine Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting machining with wear plate Machining length 6250 mm (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, spindle head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, ball screw spindles Z-axis for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 - 20.6 Please refer to the corresponding data sheets. Machining dimensions: Max. workpiece size for edge machining X = 6250 mm Y = 2100 mm Max. travel distances X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height DYNESTIC table Z = 1st stage 318 mm / 2nd stage 418 mm from top edge of table (without tool, without chuck) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-Core processor Operating system Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transfer of control and program data. Data transfer takes place via high-speed internet connection Requirement: High-speed internet connection at the machine. DYNESTIC table Solid, continuous machining table with grid division, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop rails / stop Height 30 mm, pneumatically lowerable 2 stop rails in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Boring unit 7976, 24 spindles Drive power 3.0 kW 18 vertical spindles individually selectable Arrangement in L-shape, 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating right-hand / left-hand rotation n(max.) 1000 - 5710 min-1, steplessly adjustable Chuck: M 10 thread - clearance fit 11 mm without tool, without chuck 6 horizontal spindles Itedpsw I U Ecsfx An Njk 2 double boring spindles in X direction (32 mm distance between 1st and 2nd horizontal boring spindle) 1 double boring spindle in Y direction Chuck: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without chuck Free space 1 for: Optional double boring spindle in X direction or Vertical adapter with double feed force Free space 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 min-1, steplessly adjustable, two-stage feed stroke max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Itsdpfx Anowwtpyo Nek

Condition: used, Tenoning spindle 1 0 Number of milling agregates 2 St. Spindle diameter 40,50 mm Item 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profiles For sale on behalf of a customer ----- Manufacturer's Technical Description: Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine ----- Compact, heavy-duty automatic window machine featuring a cast-iron construction, consisting of: Top-mounted cross-cut saw with 12-position turret stop system; Positive-guided saw guard for accident prevention Tenoning spindle: 40 mm diameter x 252 mm length; 2-step stroke mechanism for 3 tool positions (stroke height: 83 mm); Motor: 7.5 kW Sliding table: Adjustable on both sides from 0 to 60 degrees Automatic feed system with various infinitely variable speed settings; dual pneumatic clamping system; Length stop (LAS) with 3-position system, 2300 mm capacity Automatic transfer unit to the profiling section Profiling spindle: 40 mm diameter x 252 mm length Pneumatic stroke: 112 mm (adjustable) for 2 tool positions Motor: 7.5 kW; Spindle horizontally adjustable relative to the tool cutting edge; Adjustable front milling fence jaw Glazing bead saw with 3 kW motor and 4-position turret head adjustment; Heavy-duty articulated feed system, infinitely variable from 0 to 25 m/min. adjustable, Roller groups pivotable inward and outward Counter-stop with 5-position turret head Frame milling unit ----- Item 2: OKOMA Automatic Rebating Machine, Model UF 2 EG ----- Power Specifications: - Operating voltage: 3-phase, 380 V, 50 Hz Itjdey T R Tbspfx An Nsk - Compressed air: Air requirement: 13 NL/min; Operating pressure: 8 bar Conditioned air: According to Pneurop 6611 1. Profiling Spindle 1: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Climb and conventional milling - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Vertical (U-axis) movement of the profiling spindle - Vertical positioning: Actuation: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Actuation: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Automatic plunge mechanism: Plunge speed adjustable to ensure tear-out-free rebating - Safety and dust extraction hood with 140 mm diameter connection port 2. Profiling Spindle 2: - Spindle arrangement: Right - Power: 11 kW - Speed: 7000 rpm - Direction of rotation: Counter-rotation - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - U-axis movement of the profiling spindle - Vertical positioning: Drive: Pneumatic cylinder; 90 mm stroke for 3 tool positions Position sensor: Limit switches - Horizontal positioning: Drive: Pneumatic cylinder (forward/backward) Position sensor: Limit switches - Safety and dust extraction hood with connection port (140 mm diameter) 3. Hardware Routing Unit EG: - Spindle arrangement: Right - Drive: 3 kW three-phase motor - Speed: 6000 rpm - Spindle diameter: 30 mm - Usable length: 47 mm - Vertical positioning: None - Horizontal p...