Used Fam Edge Banding Machine for sale (66,179)

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues Dujdpfoy D A Swox Aixeu - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), Year of construction: 1989, Machine with full equipment Length approx. 9 m Edge gluing Edge sawing Pre-milling Rounding milling Corner copying Pull scraper Buffing Dsdpfef Ua R Hjx Aixeuu Corner copying

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Dujdpfx Aijgmn H Aexou

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE Dsdpfx Aiey A I Sgjxouu - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Dsdpfjy N Ukijx Aixouu

Condition: good (used), Year of construction: 1998, 0.4-5 mm Workingpiece thickness from to 10-50 mm Duedpfex Tu Rdox Aixju Total length 2730 mm Weight 720 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Dodpfx Aowlbxloixjuu Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado FÜ + PU SPS-compatible control with 7" TFT color touchscreen display CM-CombiMelt unit for EVA and PUR hot-melt adhesives Pre-milling unit – jointing Fully automatic roll magazine Fully automatic edge magazine Pneumatic flush trimming 0-3° Flush trimming – 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper blade Surface scraper blade Soundproof enclosure with space extraction Cleaning set with 4-way spray system, fine buffing unit, and sliding agent spray equipment First delivery in 2006 Machine has been WORKSHOP TESTED and is in TOP CONDITION The gluing unit was recently fully serviced and wearing parts replaced Technical data: Edge thickness: 0.4 – 8 mm Panel thickness: 8 – 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Duodov Sm Hcspfx Aixeu Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm End trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner copying unit Scraper blade Buffing unit 3-way spraying system Total connected load: 17.5 kW Dimensions: Length: 6,180 mm Width: 1,770 mm Weight: 3,100 kg - Available immediately -

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips/lippings max) mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 ca. Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 8 - 40 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 270 Dusdpfxofi Tkvs Aixju SIZING PART (for each side): Pre-Milling unit 75.30 (Kw 6,6 x 2) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1570 + 283.205 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Fine Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (Kw 0,66 x 2) max 25 m/min Corner Rounding unit (Contour Trimming) 08.465 (Kw 0,18 x 4) max 20 m/min Buffing unit 08.617-2 (Kw 0,18 x 2) Free space

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 3 Edges thickness in stips / lippings max mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 270 / mm 1300 Numerical Control /Software ICOS open Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) Dsdpjfi Tkgofx Aixjuu Top pressure system with rubber belt SIZING PART (for each side): Pre-milling Unit (vertical joint trimmers) 75.30 (Kw 6,6 x 1) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1569 + 283.205 Pressing roller (revolver) both for straight and shaped edges (softforming) mm 1.050 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Rough Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Fine Trimming unit 08.0582 (Kw 0,66 x 2) 0°-30° Glue scraping unit 08.50 Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Dujdeu Tg Uqopfx Aixeu Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Profile Scraping unit (Multi-profile, by N.C.) RB 30 Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Djdpfx Aijhvahhjxouu Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,65 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Milling grooving Unit 2 x FB 30 (Kw 5 x 2) 0 - 90° Profile Scraping unit (Multi-profile, by N.C.) RBK - 503 (2 POSITIONS) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 40 Working width (min/max) mm 225 / 2500 Numerical Control POWERCONTROL PC23 Power Touch /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 1000 Working line (work units support tables), manual adjustment mm 30 – 80 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Dusdpfx Aisv Rpdnjxju Hogging Units KD 11 (2 x Kw 6,6) + Free Space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + QA65 Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL PK30 (2 x kW 0,8), speed 30 m/min Rough Trimming unit BF20 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FF30 + FF32 (4 x kW 0,4) with FlexTrim Free Space Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 21. Spraying Unit (for polishing liquid) No. 3 Milling grooving unit SF20 (1 x Left + 2 x Right) (3 x kW 6,6) (N.C. adjustment)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) Dedpfx Aijp N D Ngjxsuu EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Dedpfohvi E Ijx Aixjuu Panels thickness (min/max) mm 12 / 40 Working width (min/max) mm 225 / 2500 Numerical Control NC 21 / HOMATIC Adjustable feeding speed (m/min) 15 - 50 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) LEFT SIDE: Jumping Milling Unit (for grooving) SF 20 (Kw 6,6 x 1) 0°-90° RIGHT SIDE: Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "A" (1 + 4 rollers) Snipping (end-cutting) unit HL 04 (2 x kW 0,18) Rough Trimming unit 2 x Kw 0,55 (0°-35°) Multi Function Unit (Profile contour Trimming unit) FK 11 - 2 x Kw 0,4 Profile edge scraping unit PN 20 Glue scraping unit (Pneu) Buffing unit (2 x Kw 0,25)

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Dujdpfx Aieu Rc Anexou Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), Double-side Sizing & Edge Banding - First Machine (1st in a line) Double side TWIN machine (1 Left Side single machine + 1 Right-side sigle machine) Dusdpfou Rc Hyjx Aixju Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Numerical Control PC base Windows /Software PC / SINTRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Free space EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt Glue + Quick Melt system) SP 30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) Edge coils supporting unit (No. 6 reels) Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (2 x Kw 1) 0°-25° No. 1 Milling grooving unit EB 60 (1 x Kw 5) 0°-90°, ISO 30 motor Profile Scraping unit (Multi-profile, by N.C.) RB 40 Glue scraping unit RC 20 Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Dusdpfxouhv R Ds Aixeu Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20/S2 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA glue/ PU glue) Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL 84 (2 x kW 0,22), speed 25 m/min Rough Trimming unit BF10 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK11 (2 x kW 0,4) Profile edge scraping unit (Multi-profile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11. Spraying Unit (for polishing liquid) No. 2 Milling grooving unit SF20 (2 x kW 6,6) Motorised panel infeed roller conveyor, with panel identification system "HOMAG" Mod. POWER TBL 100/20/25

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Dusdpfx Asd Nt Rqjixsu Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 Working width (min/max) mm 236 / 1300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 / 50 Djdpfx Aiedh Tfgsxeuu Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x 1 kW) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 6 Rough Trimming unit 08. 0555 (2 x 1 kW) max. 3° Fine Trimming unit 08. 055 (2 x 0,66 kW) 30° + 30 m/min Glue scraping unit 08.517 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0,18 kW) Free space

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 60 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40. Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) . Free space EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) QA 34 (FeMa-Tech) Pressure zone (N.C. adjustment) "A" Edge coils supporting unit (No. of reels) 6 Dedpfxjwxwyfe Aixsuu Snipping (end-cutting) unit HL84 (2 x Kw 0,22) 0°-30° Rough Trimming unit (2 x Kw 0,55) Multi-Profile Copying unit by N.C (fine and contour trimming) FK 13 (2 x Kw 0,4) revolver 8+8 Free space Profile Scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 OPTIONAL: Milling grooving unit UF11 (1 x Kw 4)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins Duodol Hydmopfx Aixou SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) No. 2 Milling units (2 x Kw 4 ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)

Condition: excellent (used), Double side - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 60 Working width (min/max) mm 195 / 1500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) QA 34 (FeMa-Tech) Pressure zone (N.C. adjustment) Type "A" Edge coils support (No. 6 reels) Milling-grooving units SF 20 (HSK63F - Kw 4,5) 0°-90° CN Horizontal Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit MF 21 (2 x kW 0,55) Profile Scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 Dujdpfowxwxbex Aixju

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 250 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (PUR. Glue + Quick Melt system + EVA Glue) VTG 3-24 + 283.201 + 283.19 + 283.203 Pressure zone Edge coils supporting unit (No. 24 reels) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Dodpfxsxggthe Aixouu Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Profile Scraping unit 08.515 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) No. 3 Grooving units 08.190 (2 x Left-hand + 1 x Right-hand) (Kw 4,5 x 3) swivelling 90°/180°/270°

Condition: refurbished (used), SINGLE-SIDE SIZING & EDGE BANDING MACHINE (Left side machine) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 1 ALU Panels thickness (min/max) mm 6 - 55 Numerical Control /Software IMATRONIC 121 /01 Adjustable feeding speed (m/min ) 6 - 30 SIZING PART : Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 4,5) 08.376 Spraying unit (Anti-sticking liquid) EDGE-BANDING PART : Lamps to heat the workpieces side + Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1569 Band Pressure zone mm 1000 + Edge coils supporting unit (N. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) working speed 25 m/min (swivelling 0-25°) Rough Trimming unit 08.0555 (2 x Kw 1) Fine Trimming unit 08.055 (2 x Kw 1) 30° + Spraying Unit (for sliding liquid) Multi-Profile Copying unit 08.348 (fine and contour trimming) adjustment by N.C (2 x Kw 0,66) Profile edge scraping unit (Multi-profile, adjustable by N.C.) 08.516 Glue scraping unit 08.517 (Pneumatic) Spraying Unit (for polishing liquid) Dsdpfx Aocr T N Djixjuu Buffing unit 08.614 (2 x Kw 0,25) Milling grooving unit 08.183 (1 x Kw 3) Smoothing unit with spheres 08.53 Chamfer Sanding Unit for straight edges WI (4 x Kw 0,75)