Edge banding machine

BIMATIC Silence 5 Modell 1802.5

Condition: used, Year of construction: 2014, For inquiries: Zoltán Utasi +36 30 205 7380 • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation Guodpfex Huhcjx Aa Toi For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Chassis Guedpfjw Nih Iox Aa Tsi Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Guodpfxerz Irre Aa Tji Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Edgebanding, flush sawing, flush milling, chamfer milling, radius milling - Scraper, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection port: 140 mm Ø - Workpiece width: min. 60 mm - Feed speed: 11 m/min - 6 bar Guodswv Uq Ajpfx Aa Tsi - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for coil material - WITHOUT pre-milling unit - Pneumatic cylinder new Shipping possible at additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Gsdpsynpc Nsfx Aa Tjui Location: NRW Availability: Approx. December 2025

Condition: good (used), Year of construction: 1999, 0,4-5 mm Workingpiece thickness from to 6-45 mm Total length 4130 mm Feed speed 11 m/min. Gjdpfx Aaezafppo Tjui Weight 1250 kg

Condition: used, total height: 1,700 mm, total length: 6,100 mm, total width: 1,450 mm, Year of manufacture: 2009 Colour: Cream Weight: 2.500 kg - Machine available from: 2026-01-19 - Year: 2009 - CE marking present: Yes - Serial number: 26 - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - - Tools available: Yes - └ 4th unit type: Rough milling unit - - Tools available: Yes - └ 5th unit type: Corner rounding unit Godpex Aq Dpofx Aa Toui - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 39.5 - Fuse [A]: 50 - Transport dimensions: 6100mm x 1450mm x 1700mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, We offer for sale 2 units of MIWE roll-in e+ 6.08 rotary gas ovens (Model 2011). The ovens are in very good condition, fully functional, and have only been used 2 days a week. They are truly in excellent condition. The price for one oven is €12,000 net. In the case of purchasing both units, the price is negotiable. Baking trays and trolley systems are not included in the price. 30 trolley systems with baking trays are available. Technical specifications of the equipment (applicable to 1 unit): • Baking tray dimensions: 60 x 80 cm (600 x 800 mm) • Baking area capacity: 8.6 to 9.6 m² (depending on the number of trolley levels, 18–20) • External dimensions of the frame: 155 x 160 x 256 cm (Width x Depth x Height) • Minimum clear ceiling height: 285 cm (for exhaust, condensation, and service access) • Weight of the empty oven: approx. 1,350 kg • Heating medium: Natural gas (type H / G20), operating pressure 20 mbar • Heating power of the burner: 60 – 75 kW • Electrical connection: 3N~ 400 V / 50 Hz, power consumption of electronics and motors approx. 2.6 kW • Recommended fuse rating: 16 A • Water and drain connection: Water supply R 3/4" (cold, softened, 2-6 bar), temperature-resistant drain DN 50 Godpfo Aghxwex Aa Toui

Condition: used, Brilliant 1 1100 Cd coating line High-quality product from Switzerland CONSTANT TABLE MACHINE / automatic head positioning Wide-belt calibrating and fine-sanding machine Combined unit: contact roller and sanding pad unit with electronically controlled segmented sanding shoe, DIAGONAL / entire sanding unit adjustable by 10° Contact roller level adjustable continuously according to grit scale Power connection approx. 14 kW Working width 1100 mm Coating sanding package: oscillating belt abrasion continuously adjustable sanding belt speed Feed rate 3 - 15 m/min, continuously adjustable stable vacuum table with coating pad, fan integrated into the machine stand Thickness adjustment across the entire working width ENORMATIC quick adjustment with feed release (for long workpieces) Gjdpfjz R S Hhox Aa Tjui Touchscreen display for automation and management of all work programs additional, robust infeed and outfeed tables, foldable First delivery 2014 / from leasing return Machine is in VERY WELL-MAINTAINED condition available from stock in Lieboch

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, total width: 100 mm, total length: 180 mm, overall weight: 450 kg, König Mini Rex Futura 4000, 2-row small bread dough divider and rounder Guodez I Dnvopfx Aa Tji Drum and pistons SKG54-AKG70 Weight range: 25–140 grams Capacity adjustable from 1,500–4,000 pieces per hour Computer-controlled with 50 programs Year of manufacture: 2006 Machine is in good working condition, an operating video is available! For more information, please call or send a WhatsApp message.