Used J+P Kvkf 400 for sale (56,126)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of Hydraulic Cores (FS/MS): 1 fixed side and 2 moving side • Number of Hydraulic Cascades: 0 Djdpfsx Nr Ryox Al Sjku • Number of Hot Runner Control Points: 8 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Dkjdoyuuzdjpfx Al Seu Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: good (used), Year of construction: 2007, operating hours: 6,522 h, functionality: fully functional, machine/vehicle number: WSVS4D1P274010219, mileage: 32,731 km, overall weight: 4,080 kg, fuel type: diesel, color: white, axle configuration: 4x2, driver cabin: day cab, gearing type: automatic, suspension: parabolic leaf (spring), Equipment: air conditioning, *Schmidt Compact 400 Dkedpfxozz Ap Uo Al Sju *Year of manufacture: 2007 *Sweeper/vacuum machine *32,731 km *2,726 sweeping hours *6,522 engine hours *Tipping function *Air conditioning *Right-hand drive

Condition: used, Year of construction: 2008, control Siemens 840D Hobbing Machines for Large Gears Flexible and Versatile Gear Hobbing Gleason’s large hobbing machines offer maximum productivity for roughing and finishing operations on cylindrical gears for many industries: wind turbines, industrial gearboxes, mining, and shipbuilding, gear machining, and many more. The guideways are wide and feature hydraulically preloaded guides, which are used in combination with a separate linear guide and backlash- free Dodpfowzypnjx Al Sjku rollers. This ensures precise slide movements with every feed. The design of the worktable ensures optimal conditions for absorbing and transferring cutting forces to the machine base. The use hydrostatic table bearings, combined with the proven backlash-free double-worm gear, guarantees precise table movements and the highest flatness and concentricity accuracies of the worktable. This holds true regardless of significant fluctuations in workpiece weight and/or high machining forces. The motorized gear hobbing heads for external and internal gear cutting are designed to meet the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal gear hobbing heads. The power range of the drive takes future tool developments into account. Naturally, the gear hobbing head drive is also backlash-free. These machines are particularly well-suited for use with state-of-the-art cutting materials. >> dry only, 1 chip conveyor, table diameter 1,870 mm

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 235 mm, spindle bore: 52 mm, turning diameter: 400 mm, center height: 200 mm, turning length: 1,000 mm, Lathes Series PREMIUM CU 400 RD-Vario Our universal lathes and lathes with stepless speed control from the PREMIUM CU series feature a wide range of features and accessories for customers across various industries. The PREMIUM CU series allows precise adjustment of cutting speed to suit material and turning diameter – especially advantageous for non-ferrous metals, plastics, and for achieving perfect surface finishes on precision parts and fits. A notable highlight is the integrated R/L control units mounted on the tool slides, enabling simple switching between clockwise and counterclockwise spindle rotation. These replace the conventional shift rods typically found on universal lathes. The machine is equipped with electromechanical spindle brakes for extremely fast spindle stops, ensuring efficient handling. The leadscrews are fitted with overload protection. Performance Data and Specifications: Center distance: 1000 mm Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: 235 mm Swing without bridge: 550 mm Bed width: 320 mm Cross slide travel: 235 mm Top slide travel: 110 mm Maximum turning tool cross-section: 25x25 mm Chuck mounting: DIN 55027 No. 6 Spindle (main spindle) taper: MK 6 mm Spindle bore: 52 mm Speed Range 1, stepless: 18 – 98 rpm Speed Range 2, stepless: 48 – 265 rpm Speed Range 3, stepless: 144 – 790 / 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Metric thread pitch (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Inch threads, TPI (40): 120 – 4 TPI Inch module threads, TPI (40): 480 – 16 TPI Tailstock quill taper: MK 4 Tailstock quill diameter: 50 mm Tailstock quill stroke: 100 mm Motor power: 7500 W Power supply: 400/50 V/Hz Total length: 2350 mm Total height: 1330 mm Weight: 1590 kg Standard Equipment: Dedpfx Alsy Hlxfj Sjku - RÖHM 3-jaw chuck - 5-piece quick-change toolholder set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool slide with splash guard - Machine base / chip tray / splash wall - Tool set / operating manual / CE PREMIUM CU Series Standards: - Heavy-duty grey cast iron machine bed, excellent vibration damping - Removable bridge - Prismatic guideways - Hardened and precision-ground main spindle, high concentricity, adjustable precision bearings - Smooth-running main spindle and feed gearbox in oil bath - Gears made of case-hardened chromium-nickel steel, hardened and precision ground - Feed reverse function - Covered trapezoidal thread leadscrew, hardened, precision ground - Tool slide with locking nut - Precisely adjustable slideways - Solid tailstock with offset - Machining accuracy according to DIN standards Including 3-axis digital position display This machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For information on equipment, please contact us.

Condition: good (used), Year of construction: 2010, operating hours: 13,231 h, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,650 mm, Linde H25D-01 Duplo 400 Sideshift / 4th Function, VW Diesel, 2010 A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. Dsdpfx Aljz Eiu Aj Ssku All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can arrange a viewing and/or test drive without any obligation. Please call beforehand to make an appointment, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, mileage: 228,400 km, power: 130 kW (176.75 HP), first registration: 11/2006, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, color: orange, gearing type: semi-automatic, emission class: euro4, Equipment: air conditioning, all wheel drive, * Mercedes Unimog U400 4x4 * 3-way tipper * All-wheel drive Dkedpfx Aloqcriuo Seu * Dual-range gearbox * Dual PTO (high and low) * Rear hydraulic system * Snow plow preparation * Front PTO * Semi-automatic transmission * VIN: WDB4051031V211726 * Engine type: 900916 * kW: 130 * Euro 4 * Displacement: 4249 cc * Unladen weight: 6540 kg * Gross weight: 12500 kg * Fifth wheel load: 1000 kg * Towing capacity: 18700 kg * Wheelbase: 3080 mm * Tipper length: 2.40 m * Tipper width: 2.15 m * Vehicle length: 5150 mm * Vehicle width: 2330 mm * Vehicle height: 3070 mm * Tires: 385 / 65 R 22.5 * Net price * All information without guarantee Tel./WhatsApp:

Condition: used, Year of construction: 2014, operating hours: 1 h, machine/vehicle number: 0300192931, color: other, GVW: 6.547 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 1 cm CE mark: yes Machines for Sale! Djdpozcp H Djfx Al Seku Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime.  All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: used, mileage: 603,000 km, first registration: 09/2026, fuel type: diesel, fuel: diesel, color: other, gearing type: automatic, Year of construction: 2013, Axle 1: left 14 mm right 14 mm Axle 2: left 7-7mm right 7-7 mm Dkedpfxjzzi Rre Al Seu Axle 3: left mm right mm

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS07, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: Dkodpfoz Inbyjx Al Sju 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: used, belt width 400 mm all stainless steel adjustable speed with lower and upper belt adjustable upper belt with outfeed belt Dkedpfx Alozz H Rve Sou with air knife dimensions (l x w x h) : ± 2.500 x 900 x 1.400 mm mobile 4,45 kW

Condition: used, all stainless steel belt width 400 mm mobile adjustable speed filling capacity 27 L weight: 390 kg dimensions (l x w x h): ± 2.860 x 750 x 1.450 mm With adjustable take-over outfeed conveyor Dkodpez Ait Nofx Al Seu

Condition: used, -Semi-automatic round or square dough dividers from €1,490 - Semi-automatic dough divider with square bowl, 20 divisions; price: €1,490 - Semi-automatic round dough divider, 20 divisions, brand: Lambert; price: €1,990 - Semi-automatic round dough divider, 20 divisions; price: €1,990 - Semi-automatic dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,490 - Semi-automatic square dough divider, 20 divisions, brand: PANIRECORD; price: €2,490 Dksdpfx Asxvyymjl Ssu - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,500 - Semi-automatic round bowl dough divider, 20 divisions, brand: PANIRECORD; price: €2,500 - Semi-automatic hydraulic square dough divider JAC DIV 20, used, brand: JAC; price: €2,600 - Dough divider, 20 divisions, square DIVITRAD, brand: Bertrand Puma; price: €3,900

Condition: good (used), Year of construction: 2014, operating hours: 12,300 h, Still RX70-40 Triplo 400 Freelift / Sideshift / Fork Adjuster Container Truck Deutz Diesel 2014 A video can be sent via WhatsApp. We have a continuous supply; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a viewing and/or test drive without obligation. Please call beforehand, as we are not always on-site. Dedpfxezypuns Al Seku Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2015, fuel type: electric, Mast: articulated arm Lifting capacity: 230 kg Dkodpfxszymd To Al Sju Please contact Gebrauchtgeräte Center for more information

Condition: used, mileage: 655,805 km, power: 291 kW (395.65 HP), first registration: 09/2014, fuel type: diesel, tire size: 355/50 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, total length: 5,920 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2014, Equipment: ABS, air conditioning, electric window regulation, parking heater, power mirror, Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Front axle: Tyre size: 355/50 R22.5; Max. axle load: 8000 kg Rear axle: Tyre size: 295/80; Max. axle load: 11500 kg Weights Empty weight: 7.267 kg Carrying capacity: 12.233 kg GVW: 19.500 kg Max. towing weight: 50.000 kg Dkodpfxjz Nlzhs Al Ssu Interior Number of seats: 2 Maintenance APK (MOT): tested until 06/2027 Identification Registration number: 93-BFD-3

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 4,893 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 150 mm, fuel type: electric, mast type: duplex, construction height: 2,960 mm, fork length: 1,200 mm, drive type: Elektro, Electric side loader Mast type: Duplex Condition: Limited operational readiness Technical condition: normal Battery voltage: 80V Dkedpfx Alszwau Te Ssu Battery capacity: 1085Ah Battery condition: 20 - 40% Description: If required, an identical machine is available for spare parts.

Condition: used, Year of construction: 2007, max. workpiece diameter 2800 mm workpiece diameter nominal 2400 mm max. module 30 mm control Siemens Sinumerik 840 D Minimal workpiece - internal diameter 630 mm Maximum workpiece outer diameter 3800 mm Maximum workpiece tooth width 600 mm max. rim strength 50 mm Maximum permissible head circle diameter 440 mm Hob/disc cutters – Maximum length 90 mm Milling arbour diameter 80 mm milling head -swivable +15/-15 Grad workpiece table outer diameter 2500 mm Workpiece table bore 800 mm Djdpfjw Rf S Sox Al Soku Workpiece table – Maximum permissible load 400 kN Rapid traverse on the X and Y axes 3000 mm/min rapid travel z-axis 4000 mm/min Workpiece table speed 0-4 U/min Tools speed 18-180 U/min Cutter arbor cone HSK-B160 weight of the machine ca. 57 t dimensions of the machine ca. 10,7 x 8,1 x 4,85 m total connected load 100 kVA Equipment/Accessories: - IFK2 internal milling head - Milling spindle with spacer discs - Chip conveyor - Oil mist extraction - Wet and dry machining possible - 2 chip conveyors - Technical documentation

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 9,900 kg, maximum load weight: 14,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction Turntable with robust ball bearing, storage box recessed Turntable extension Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear across the entire width Extendable wideners to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-loader type 3 pairs of tie-down points, each rated at 10 tons, integrated in the front of the floor 6 pairs of tie-down anchor plates, top and side in the outer frame, each rated at 10 tons 1 x in the neck area the rest distributed in between with a maximum distance of 1200 mm 1 x rear slope 5 pairs of pocket slots recessed in the outer frame, inside 70 x 40 mm, (can be converted to 5-ton ring tie-down eyes, not included in the scope of supply) Towing device, turntable trailer Tow bar with tested 40 mm towing eye Note! With a 40 mm towing eye, the permissible total weight of the truck must not exceed 18000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Axle / chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization in the front and rear (rocker equalization) Wheels & Tires 235 / 75 R 17.5, according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Dkjdpsi Ri I Esfx Al Sou ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (beacon can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area: steel floor followed by 70 mm softwood floor, steel / diamond plate in the wheel arch area Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2800 mm long, 750 mm wide, laterally movable covered with wood with gas spring support Operating Instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle / support and saddle loads. Country of Registration / Signs Country of Registration: Germany 1 with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame: RAL 3002 Carmine Red 10-year warranty against rust-through Tow bar: galv

Year of construction: 1994, condition: like new (used), Used high quality URSVIKEN 400ton x 5metre cnc Press Brake for sale Very clean 5metre cnc pressbrake for sale – European / Swedish made machine Model = Optima 400 5.1/4.37 Bed Length 5000mm / 5metre 8axis – 6axis back gauge Y1, Y2, X1,X2,R1,R2,Z1,Z2 CNC Hydraulic Press 400 Tonne Capacity Swiss made Cybelec Controller – Presscad 900 – the same control as Bystronic and Edwards Pearson pressbrakes Multiple Forming Tools 8m x 4m (26ft x 13ft) Footprint (inc. Tool Trolley and Controller 26.5 tonne Machine Weight Year / new 1994 Dkodjhikggepfx Al Ssu Refurbished in 2016 Full Working Order Stop time 55ms Max working pressure 31.8MPa Guard distance 90mm Complete with a good selection of tooling – we can quote for brand new top and bottom tooling to bend your steel on this machine The full services of delivery, installation and training can covered.

Condition: used, Tepla Tepla 400 SC 230 Volt, 13A, 50/60Hz Pressure: 4-6 bar Scope of delivery: (See images) We are happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax. Dsdpfxszh Drqe Al Ssku

Condition: used, mileage: 119,391 km, power: 175 kW (237.93 HP), first registration: 11/2010, overall weight: 12,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 10/2026, gearing type: semi-automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), Mercedes-Benz Unimog U 400 4x4 | Jotha CombiCon | Schmidt Snowplow | Flatbed VIN: V225352 CHASSIS / COMPONENTS * 4x4 * Coil spring suspension * Wheelbase: 3,080 mm * ABS * Differential locks * Ringfeder trailer coupling * 2-line compressed air connection for air-braked trailers * Front mounting plate * Municipal hydraulic system, front and rear * Electrical connections at the rear * Snow chains * Work lights * Rotating beacons * 1 aluminum diesel tank * 1 AdBlue tank BODY * Jotha CombiCon 4520 U quick-change system * Body construction year: 2010 * Loading, unloading, tilting, and high-dumping function * Separate operation of the CombiCon system * Flatbed included * Schmidt snowplow KL-V 32 * Snowplow construction year: 2006 EXCHANGEABLE FLATBED * Separate exchangeable flatbed for the Jotha CombiCon system * Steel flatbed with aluminum side boards * Rear and side gates * Removable front grille, can be mounted on the front of the loading area * Lashing points in the loading area floor * Support legs with rollers * Internal dimensions approx.: * Length: 2,427 mm * Width: 2,078 mm * Side board height: 402 mm * Volume: approx. 2.03 m³ TIRES Dkjdpfxozq Iv Ss Al Seu * Axle 1: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % * Axle 2: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % ENGINE / TRANSMISSION * 175 kW (238 hp) * 6,374 cm³ displacement * 11,658 operating hours * Euro 5 * Telligent transmission, 3-pedal * Permanent all-wheel drive * Engine brake * Cruise control CABIN / DRIVER'S CAB * Air conditioning * Heated windshield * Rear view camera with monitor * CD radio * AUX and Bluetooth * Digital tachograph WEIGHTS * Permissible total weight: 12,500 kg * Unladen weight: 6,640 kg * Payload: 5,860 kg OTHER * Mileage: 119,391 km * MOT: 10/2026 * Inspection: New MOT/inspection as well as weight adjustments (reduction or increase) are possible upon request. We will not leave you alone even after the purchase: We will help you with obtaining export or short-term registration plates. A transport of your vehicle within Germany is also possible. Just contact us - we will be happy to help you! We speak German, English and Russian. All information is without guarantee. Subject to changes, errors, printing and spelling errors as well as prior sale. About us: Leible Nutzfahrzeuge is a family-run company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of preparation and sale of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, it is not only the vehicle that counts, but also the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. See for yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term registration plates We will help you obtain export or short-term registration plates. Customs formalities We will also support you with customs matters. Vehicle transport If required, we will organize a transport.

Condition: used, mileage: 119,391 km, power: 175 kW (237.93 HP), first registration: 11/2010, overall weight: 12,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 10/2026, gearing type: semi-automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), Mercedes-Benz Unimog U 400 4x4 | Jotha CombiCon | Schmidt Snowplow | Flatbed VIN: V225352 CHASSIS / COMPONENTS * 4x4 * Coil spring suspension * Wheelbase: 3,080 mm * ABS * Differential locks * Ringfeder trailer coupling * 2-line compressed air connection for air-braked trailers * Front mounting plate * Municipal hydraulic system, front and rear * Electrical connections at the rear * Snow chains * Work lights * Rotating beacons * 1 aluminum diesel tank * 1 AdBlue tank BODY * Jotha CombiCon 4520 U quick-change system * Body construction year: 2010 * Loading, unloading, tilting, and high-dumping function * Separate operation of the CombiCon system * Flatbed included * Schmidt snowplow KL-V 32 * Snowplow construction year: 2006 EXCHANGEABLE FLATBED * Separate exchangeable flatbed for the Jotha CombiCon system * Steel flatbed with aluminum side boards * Rear and side gates * Removable front grille, can be mounted on the front of the loading area * Lashing points in the loading area floor * Support legs with rollers Dsdpfozq Ivrox Al Ssku * Internal dimensions approx.: * Length: 2,427 mm * Width: 2,078 mm * Side board height: 402 mm * Volume: approx. 2.03 m³ TIRES * Axle 1: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % * Axle 2: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % ENGINE / TRANSMISSION * 175 kW (238 hp) * 6,374 cm³ displacement * 11,658 operating hours * Euro 5 * Telligent transmission, 3-pedal * Permanent all-wheel drive * Engine brake * Cruise control CABIN / DRIVER'S CAB * Air conditioning * Heated windshield * Rear view camera with monitor * CD radio * AUX and Bluetooth * Digital tachograph WEIGHTS * Permissible total weight: 12,500 kg * Unladen weight: 6,640 kg * Payload: 5,860 kg OTHER * Mileage: 119,391 km * MOT: 10/2026 * Inspection: New MOT/inspection as well as weight adjustments (reduction or increase) are possible upon request. We will not leave you alone even after the purchase: We will help you with obtaining export or short-term registration plates. A transport of your vehicle within Germany is also possible. Just contact us - we will be happy to help you! We speak German, English and Russian. All information is without guarantee. Subject to changes, errors, printing and spelling errors as well as prior sale. About us: Leible Nutzfahrzeuge is a family-run company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of preparation and sale of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, it is not only the vehicle that counts, but also the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. See for yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term registration plates We will help you obtain export or short-term registration plates. Customs formalities We will also support you with customs matters. Vehicle transport If required, we will organize a transport.

Condition: used, mileage: 119,391 km, power: 175 kW (237.93 HP), first registration: 11/2010, overall weight: 12,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 10/2026, gearing type: semi-automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), Mercedes-Benz Unimog U 400 4x4 | Jotha CombiCon | Schmidt Snowplow | Flatbed VIN: V225352 CHASSIS / COMPONENTS * 4x4 * Coil spring suspension * Wheelbase: 3,080 mm * ABS * Differential locks * Ringfeder trailer coupling * 2-line compressed air connection for air-braked trailers * Front mounting plate * Municipal hydraulic system, front and rear * Electrical connections at the rear * Snow chains * Work lights * Rotating beacons * 1 aluminum diesel tank * 1 AdBlue tank BODY * Jotha CombiCon 4520 U quick-change system * Body construction year: 2010 * Loading, unloading, tilting, and high-dumping function * Separate operation of the CombiCon system * Flatbed included * Schmidt snowplow KL-V 32 * Snowplow construction year: 2006 Dedpfxozq Iv Ej Al Soku EXCHANGEABLE FLATBED * Separate exchangeable flatbed for the Jotha CombiCon system * Steel flatbed with aluminum side boards * Rear and side gates * Removable front grille, can be mounted on the front of the loading area * Lashing points in the loading area floor * Support legs with rollers * Internal dimensions approx.: * Length: 2,427 mm * Width: 2,078 mm * Side board height: 402 mm * Volume: approx. 2.03 m³ TIRES * Axle 1: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % * Axle 2: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % ENGINE / TRANSMISSION * 175 kW (238 hp) * 6,374 cm³ displacement * 11,658 operating hours * Euro 5 * Telligent transmission, 3-pedal * Permanent all-wheel drive * Engine brake * Cruise control CABIN / DRIVER'S CAB * Air conditioning * Heated windshield * Rear view camera with monitor * CD radio * AUX and Bluetooth * Digital tachograph WEIGHTS * Permissible total weight: 12,500 kg * Unladen weight: 6,640 kg * Payload: 5,860 kg OTHER * Mileage: 119,391 km * MOT: 10/2026 * Inspection: New MOT/inspection as well as weight adjustments (reduction or increase) are possible upon request. We will not leave you alone even after the purchase: We will help you with obtaining export or short-term registration plates. A transport of your vehicle within Germany is also possible. Just contact us - we will be happy to help you! We speak German, English and Russian. All information is without guarantee. Subject to changes, errors, printing and spelling errors as well as prior sale. About us: Leible Nutzfahrzeuge is a family-run company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of preparation and sale of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, it is not only the vehicle that counts, but also the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. See for yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term registration plates We will help you obtain export or short-term registration plates. Customs formalities We will also support you with customs matters. Vehicle transport If required, we will organize a transport.

Condition: used, mileage: 119,391 km, power: 175 kW (237.93 HP), first registration: 11/2010, overall weight: 12,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 10/2026, gearing type: semi-automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), Mercedes-Benz Unimog U 400 4x4 | Jotha CombiCon | Schmidt Snowplow | Flatbed VIN: V225352 CHASSIS / COMPONENTS * 4x4 Dkedpfozq Ivxsx Al Ssu * Coil spring suspension * Wheelbase: 3,080 mm * ABS * Differential locks * Ringfeder trailer coupling * 2-line compressed air connection for air-braked trailers * Front mounting plate * Municipal hydraulics, front and rear * Electrical connections at the rear * Snow chains * Work lights * Rotating beacon lights * 1 aluminum diesel tank * 1 AdBlue tank BODY * Jotha CombiCon 4520 U quick-change system * Body year of manufacture: 2010 * Lifting, lowering, tilting, and high-dumping function * Separate operation of the CombiCon system * Flatbed included * Schmidt Snowplow KL-V 32 * Snowplow year of manufacture: 2006 INTERCHANGEABLE FLATBED * Separate interchangeable flatbed for the Jotha CombiCon system * Steel flatbed with aluminum side walls * Rear and side gates * Removable front grille, can be mounted at the front of the loading area * Lashing points in the loading area floor * Support legs with rollers * Internal dimensions approx.: * Length: 2,427 mm * Width: 2,078 mm * Gate height: 402 mm * Volume: approx. 2.03 m³ TIRES * Axle 1: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % * Axle 2: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % ENGINE / GEARBOX * 175 kW (238 hp) * 6,374 cm³ displacement * 11,658 operating hours * Euro 5 * Telligent gearbox, 3-pedal * Permanent all-wheel drive * Engine brake * Cruise control CABIN / DRIVER'S CAB * Air conditioning * Heated windshield * Rear view camera with monitor * CD radio * AUX and Bluetooth * Digital tachograph WEIGHTS * Permissible total weight: 12,500 kg * Unladen weight: 6,640 kg * Payload: 5,860 kg OTHER * Mileage: 119,391 km * MOT: 10/2026 * Inspection: New MOT/inspection as well as weight reductions or increases are available upon request. We will not leave you alone even after the purchase: We will help you with obtaining export or short-term license plates. A delivery of your vehicle within Germany is also possible. Just contact us - we will be happy to help you! We speak German, English and Russian. All information without guarantee. Subject to change, errors, printing and typing errors as well as prior sale. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of preparation and distribution of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, not only the vehicle counts, but also the service behind it. Fairness, seriousness and customer satisfaction are our top priorities. Therefore, we support you personally and reliably - from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you with loading your purchased vehicles. Special transports We will support you in the organization of special transports. Export and short-term license plates We will help you with obtaining export license plates or short-term license plates. Customs formalities We will also support you with customs matters. Vehicle delivery On request, we organize a delivery.