Used Kapelou Last Mile Miniload Solution for sale (6,829)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Nodpfxjvf E Avo Ahzewg Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Nwedpfjviwdmox Ahzeg Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: ZMS 100-010, travel distance X-axis: 100 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 135 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 75,000 rpm, total height: 2,040 mm, total width: 770 mm, total length: 1,100 mm, table width: 300 mm, table length: 300 mm, table height: 1,360 mm, type of input current: three-phase, overall weight: 1,250 kg, input voltage: 400 V, input current: 16 A, Equipment: documentation/manual, The “micro one” is a professional micro-machining center that can be adapted to a wide range of requirements with exceptional flexibility. It is characterized not only by its extremely compact design and high-quality construction but also by its interchangeable modules. Modularity in the smallest of spaces. A maximum of 0.9 square meters of valuable floor space is all you need to invest in a fully functional 3-axis machining center. Plug & Play not only describes the product technology used but also applies to transport: the micro one easily fits through any standard door. The machine was only used for processing acrylate. Nwodpfsy Urgfex Ahzjg

Condition: good (used), approx. 5,500 pieces, folding crate, Euro stacking container, Bekuplast, 600 x 400 x 285 mm, gray - used - : Price per unit ex location (net): Minimum purchase 3 pallets (min. 384 crates): only 6.-€ (net)! for purchase of 9 pallets a (min. 1,152 pieces): only € 5 (net) for complete purchase: only € 4.50 (net)! Manufacturer: Bekuplast Type: Clever-Retail-Box 56 ltr. 63843 Niedernberg Year of manufacture: unknown Nwodpfxjvff H Uo Ahzjg External dimensions: 600 x 400 x 285 mm (folded 65 mm high) Internal dimensions: 565 x 365 x 275 mm Sides and base closed Roughly ribbed sandwich base with welded plate in gray Color: grey 401 Base: sandwich base Sides: closed Handles: open Material: PP-C (polypropylene copolymer) Suitable for industrial use: Yes Weight: 2,955 kg 1 pallet packed approx. 2m high = approx. 128 crates, 1 pallet approx. 2.40 m high packed: approx. 156 boxes Condition: good, with embossed Weltbild logo Available: immediately, partial quantities later Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: used, Year of construction: 2007, functionality: fully functional, input current: 73 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this used Glaston Bavelloni MTS64 glass cutting desk, year of construction 2007. Voltage: 400 V Phase: 3 Frequency: 50 Hz Power: 29 kW Current: 73 A If you have any questions or need more information, feel free to send us a message or give us a call. Nwsdoyzxf Uopfx Ahzsg

Condition: used, Year of construction: 2017, operating hours: 32,536 h, functionality: fully functional, machine/vehicle number: B1377, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,860 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 250 kg, pressure: 1,860 bar, power: 3 kW (4.08 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, cylinder diameter: 12 mm, load hours: 32,536 h, opening width: 110 mm, Equipment: documentation/manual, For sale is a very well-maintained Babyplast 6/10P injection molding machine from 2017. This machine has only been operated by a professional molder, has been regularly serviced, and is in excellent condition. With only 32,536 operating hours, it is among the less-used machines in its performance class and is ready for immediate operation. Thanks to its extensive additional equipment, this unit offers optimal conditions for efficient, precise, and stable production processes. Save on dealer commissions by purchasing directly from the machine owner. Multiple machines available for immediate delivery. All machines are identically equipped, operating hours may vary but are in a similar range. If interested, please contact us – we can also offer you an attractive bundle price. Nsdpfxoyuuh Dj Ahzjwg Equipment & Highlights ✔ Selective chute – clean separation and optimized parts handling ✔ Ceramic heating beads – allow higher processing temperatures and energy-efficient heating ✔ Electric mold heating unit – ensures precise mold temperature control ✔ Robust machine frame – ideal for operation and maintenance ✔ Air-blast unit – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Technical Data – Babyplast 6/10PT Plasticizing unit - Plunger diameter: 12 mm - Stroke volume: 6 cm³ - Specific injection pressure: 1830 bar Clamping unit - Clamping force: 62.5 kN - Opening force: 4 kN - Opening stroke: 30–110 mm - Ejector force: 5 kN - Ejector stroke: 45 mm Dimensions: - Weight incl. frame: approx. 250 kg Shipping dimensions: L: 116 cm W: 70 cm H: 195 cm This is a private sale. Warranty and liability for material defects are excluded.

Condition: good (used), Year of construction: 1997, Adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, compensating traverse -Manufacturer: LHS load handling equipment, compensating spreader beam for transporting different loads -Type: TIV 10-6 -Loading capacity: 10 t Nwsdpfxey D Hk Rs Ahzeg -Transport dimensions: 6030/410/H930 mm -Empty weight: 720 kg

Condition: like new (used), Heavy-duty pallet: Nwjdpey Tt Inofx Ahzsg Internal dimensions: 55 cm x 66 cm Quantity available: 11 Price per unit: €650.00 Heavy-duty pallets: Internal dimensions: 90 cm x 68 cm Quantity available: 2 Price per unit: €750.00 Quantity | Unit | Price per unit (€) ----- | ----- | ----- 1 | Piece | 8,650.00 Total (€) | | 8,650.00 For the purchase of all 13 pallets: €7,900.00

Condition: new, Year of construction: 2026, We offer: Pellet machines from the WALW-Solutions brand, featuring unique quality, honest workmanship, and at a fair price. Honest Work: We manufacture our systems ourselves directly in Poland. Only components such as gearboxes and motors are sourced from reputable manufacturers. All other parts are designed and built in-house, allowing us to meet every requirement individually. Fair Price: We produce in Poland and are transparent about it. Other competitors who label their product as 'Made in Germany' typically only assemble the machines in Germany and source most components from Lithuania. We let you benefit from the lower production costs, which allows our offer prices to often be 40% below those of competitors. Nwsdpfxslt Ugtj Ahzsg These machines for pellet production are completely new to the market in this price/performance segment and are unique in Europe! WALW-Solutions machines are available exclusively through us! From systems for processing your own wood chips from firewood operations or joineries, to professional industrial pellet production from wood chips, straw, miscanthus, etc.—as well as manufacturing hay or straw cobs—we can provide the ideal solution for your needs. Our plants have capacities ranging from 150 kg/hour up to 5 t/hour and come equipped with all necessary components for a fully automated system. We offer tailored solutions for any input material and can integrate automation into existing systems as well. All machines and control units are equipped with components from Siemens, ABB, Schneider Electric, or similar leading brands. Please note: If you have a valid VAT ID, net purchases are possible! We look forward to your inquiry! For more information or direct interest, please contact me on my mobile at:

Condition: used, Year of construction: 2016, functionality: fully functional, Nominal thermal output: 150 kW Firing thermal output: 45-150 kW Boiler water volume: 370 liters Boiler class: 3 Maximum operating pressure: 3.0 bar Maximum operating temperature: 90°C Nwsdpfx Ahox At Nbszsg Must be disassembled and transported by the buyer.

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Nsdsy Sl Uqopfx Ahzewg Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The MECA S4000 traysealer is an automatic packaging machine designed to ensure hermetic tray closure. Thanks to its high-performance sealing system, it effectively protects food products from air, moisture, and contaminants, while extending their shelf life. Indeed, this machine helps maintain food freshness and quality, making it an ideal choice for companies looking to improve their packaging processes. Furthermore, the MECA S4000 traysealer is designed for easy integration into various production lines. Furthermore, its versatility and quick tool changeover allow it to adapt to several tray formats, thus optimizing productivity. Furthermore, its ergonomic design and ease of use make it accessible to everyone, even less experienced operators. With easy maintenance and complete cleanability, this machine ensures high hygiene standards. Nwodpfxeu Nv Nro Ahzsg In summary, the MECA S4000 is a robust and efficient solution for companies looking to improve their packaging processes while ensuring optimal product preservation. Technical specifications: Manufacturer: MECAPLASTIC Type: S4000 Year of manufacture: 2010 Speed (cycles/min): up to 6 Automatic Used machine. Pros: Sealing machine, easy to use. Quick tool change. Ergonomic operation. Complete cleanability. p3dpF1Eu

Year of construction: 1994, condition: used, - Year: 1994 - Documentation available: Yes - CE certificate present: No - Serial number: 40640000 - Control: Conventional Financial information Nedpfx Aownhl Rohzswg VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2010, condition: used, For sale is a used vertical centrifugal pump from Emile Egger Pumpe & Co. AG from the year 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Number: T 200708 Njdpfxegbflus Ahzowg Year of construction: 2010 L/s: 2,77 1/min: 1800 m: 14,7 Connections: DN50 and DN65 length: 182cm quantity: 1 Motor data: Manufacturer: VEM motors GmbH Type: K21R 132 S 4T FDS TPM140 /0543 Number: 0883082001004H kW: 5,5 V: 400 / 690 A: 11,8 / 6,85 rpm: 1425 For further data see type plate

Year of construction: 2010, condition: used, For sale is a used vertical centrifugal pump from Emile Egger Pumpe & Co. AG from the year 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V2 LB3B-2 Nedpfx Aegbflmehzjwg Number: T 202000 Year of manufacture: 2010 L/s: 2,77 1/min: 2390 m: 26,5 Connections: DN50 and DN65 length: 192cm Quantity: 1 Motor: Manufacturer: VEM motors GmbH Year of construction: 07/2010 Type: K21R 160M 2 FD TWS HW Number: 178086/0001 H kW: 11 HP: 15 V: 400 A: 20 1/min: 2900 For further data see type plate

Condition: used, functionality: fully functional, TECHNICAL DATA: Condition: Used Model: Roller Conveyor Segment length: approx. 2,500 mm Overall width: approx. 950 mm Roller width: approx. 855 mm Roller diameter: approx. 60 mm Roller pitch: approx. 150 mm Brake rollers: Yes Material: Steel STOCK AVAILABLE: 130 units Net price per segment: €105.00 Gross price per segment: €124.95 Tiered pricing possible YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping can be arranged at an additional charge. Extra costs depend on the delivery location and shipment size, and can be provided upon request. PAYMENT TERMS Payment terms to be agreed upon in the event of an order. Prices are per unit/net price or as specified in the product description (plus VAT). You will, of course, receive an invoice stating the VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products from the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for trade, industry, and handicraft. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, feel free to contact us. Njdpjxwpglefx Ahzswg Four wins – The building blocks of DLK’s success – Storage technology | Levelmaker® | Logistics | Solutions

Condition: used, TECHNICAL DATA: Condition: Used Model: Roller Conveyor Segment length: approx. 2,400 mm Overall width: approx. 1,150 mm Roller width: approx. 1,050 mm Roller diameter: approx. 60 mm Braked rollers: yes Material: Steel Nwodpfx Aoxfb T Tjhzeg INVENTORY: 150 units PRICING: Net price per segment: €84.00 Gross price per segment: €99.96 YOUR CONTACT PERSONS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION: We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional charge. The extra costs depend on the delivery location and the size of the shipment and can be individually requested from us. PAYMENT TERMS: Payment terms are to be agreed upon in the event of an order. The price is understood as a unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice stating the VAT separately. ABOUT US: DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanines, textile warehouses, as well as machinery for trade, industry, and the skilled trades. We continuously offer interesting used equipment from various manufacturers/brands at attractive terms. If you have any questions, please feel free to contact us. Four in a row – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Professional milling machine / shot blaster for floor preparation from the renowned Swiss manufacturer Blastrac / Früh. This machine is designed for milling, removal of coatings, adhesives, paint, epoxy resins, and for preparing concrete surfaces prior to further processing. The device is in good technical and visual condition. It features a robust industrial-grade build, equipped with a powerful ABB motor and a milling drum. It is ideal for both renovation and industrial tasks. Technical Data: • Manufacturer: Früh / Blastrac • Model: RT-2000 EL • Machine type: concrete scarifier / milling machine • Power supply: 230 V • Frequency: 50 Hz • Machine power: 1.85 kW • Motor: ABB Motors • Motor speed: 2800 rpm • Working capacitor: 50 µF / 400 V • Protection rating: IP55 • Machine number: 4122 000007 Applications: • Removal of coatings and paint • Concrete milling • Floor preparation Nodpfxjy R Ergo Ahzswg • Removal of adhesives and resins • Renovation of industrial surfaces Condition: used, fully complete. The machine shows normal signs of wear consistent with use.

Condition: new, functionality: fully functional, Year of construction: 2026, RSS 600 series Mono Rotor Shredder new model 2026 18.5kw Screen size in consultation Motor cover, pusherbox guide strips, PLC controlled. Conveyor and/or discharge screw is optional available. suitable for various types of plastic/wood/or other material Delivery in consultation Larger or smaller models also available. Nwsdpfsirt H Aex Ahzeg Intrested ?, reactions with your name, company name and telephone number.

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Njdst Iwt Uspfx Ahzowg reactions or questions ? please with full name, company name and phone number.

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver the machines where you want them, install them if you wish by mutual agreement. Optional: stainless steel drain element, stainless steel storage silo, blower, pipes approx 3 meters. Grinder 800 series 22 kW or 37 kW 3 x 2 blade set configuration. Bwj3E79Mpn 2 x stators screen deck your request With Variablele Frequency controller, Optional Product discharge and storage in various options in combination extra favorably priced Motor power adaptable. Other adjustments can be discussed such as a rotor adjustment, more blades e.g. 5 rows of blades or heavy duty version. Delivery / time in consultation. Call or email us for consultation or if you have questions, please respond with your name, company name, and correct phone number. Without these correct details RSS Recycling Shredders and Solutions (Netherlands) cannot respond. Nwsdpfx Ajt Iw Huohzsg

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver machines at any place, install when you whish and support you along the way, at any time. Grinder 1000 series 45kW 3 x 2 knife set 2 x stators screen your request Nedpog Ainqsfx Ahzswg Product discharge and storage in various options. Other adjustments negotiable. Delivery in consultation. Call or email us for consultation or if you have any questions, important! name company name and telephone number.

Condition: new, Year of construction: 2026, functionality: fully functional, RSS HD 4 Shaft Shredders in any size, Adjustments to e.g. knives, motors, sieve, frame possible. Supply and discharge belts, storage, metal separation possible. Larger or smaller models also available. optional fast hydraulical screen cleaning or changesystem Njdpfx Ahsh N Dmnozewg for advise or information do not wait, contact us. Delivery in consultation.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 4 h, power: 45 kW (61.18 HP), Rotor length: 1000 mm, motor power: 45 + 2.2 kW. Nsdpfx Ahskzg U Djzowg Hopper size: 1400 x 1000 mm, screen size available on request. Optional conveyor belt available. Delivery upon request. For more information: RSS Recycling Shredders & Solutions Please include company name for inquiries or questions. IMPORTANT! Provide name, company, and telephone number.

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Nwjdpfx Ajy Smgzshzsg Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request