Used Panem Negative Conservator 600X800 for sale (357)

Condition: used, Centrifugal pumps for pumping liquids. The liquid enters the housing through the suction flange. The impeller creates a negative pressure in the centre of the suction pipe, as the medium is pressed to the edge of the casing by centrifugal force. Here, the liquid rises due to the higher pressure and leaves the casing via the pressure flange. Used centrifugal pumps from various manufacturers, with different key figures and equipment. Both mobile and stationary centrifugal pumps are available. Capacity: 15 - 1080 hl/h Delivery head: 5 - 140 m Power factor: cos ϕ Speed: 1435 rpm - 2930 rpm Power: kW Voltage: 22 V Current: 3 - 43 A Frequency: 5 Hz Capacity: 1080 hl/h Pumping head: 140 m Drive: 3520 rpm Performance factor: 0 cos ϕ Power: 0, - kW Current: 1,1 - 117 A Voltage: 22 V Frequency: 5 Hz Ncsdpjvcqyuofx Ahzet

Condition: used, Used Rinsing Machine Poggio for glass bottles 6000 bph Structural features of the used rinsing machine Poggio The Used Rinsing Machine Poggio for glass bottles 6000 bph operates with 24 grippers specifically designed to process 0.75-liter glass bottles. First of all, the machine follows a clockwise rotation and performs a single rinsing phase. Additionally, the rotating support interfaces directly with the grippers, which securely hold each bottle to ensure accurate positioning and tilting. As a result, the system optimizes the efficiency of the rinsing cycle. Moreover, engineers built the stainless steel frame to endure intensive production environments, while protective enclosures enhance safety in humid bottling areas. Treatment system and operating principles The machine performs a single rinsing cycle using only water, without relying on any chemical agents. Notably, the Used Rinsing Machine Poggio for glass bottles 6000 bph integrates a no bottle no spray system, which activates the spray only when it detects the presence of a bottle. In contrast, it disables the spray if no container is in position. Consequently, the machine avoids wasting water and conserves energy used for pumping. Furthermore, this feature—technically referred to as spray activation conditioned by bottle presence—protects the spray nozzles from premature wear. In fact, the control system operates through sensors or mechanical cams that allow spraying exclusively when the gripper locks the bottle in place. Therefore, the rinsing process remains efficient and sustainable throughout operation. Bottle format compatibility The Used Rinsing Machine Poggio for glass bottles 6000 bph supports two standard bottle formats: Bordeaux and Champagne. To clarify, the machine includes adjustable centering systems and interchangeable adapters to maintain bottle stability during tilting and rinsing. In addition, the design of the infeed star and bottle guides allows operators to change formats quickly. As a result, the machine maintains production continuity and minimizes downtime. Hence, manufacturers can easily integrate it into existing lines that require flexibility. Furthermore, its high positioning accuracy ensures smooth operation even in high-speed automated systems. Nsdpfxswcfz Ss Ahzoct Performance and production capacity This machine consistently delivers a nominal output of 6,000 bottles per hour. Thanks to its 24 grippers, the machine supports continuous operation while respecting the necessary rinsing time per unit. While variables such as water pressure, line stability, and feeding regularity may influence actual performance, the machine typically operates within standard tolerances. In other words, it remains reliable for medium-capacity bottling lines. Additionally, operators can optimize settings based on specific production requirements without compromising throughput. Industrial applications and usage contexts of the Used Rinsing Machine Poggio Industries in the wine and sparkling wine sectors commonly adopt the Used Rinsing Machine Poggio for glass bottles 6000 bph.

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Ncedpfjvvi Nzex Ahzst

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Ncedpsvvi Rfsfx Ahzjt

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Storage location: Nattheim Ncsdpjvxk Ansfx Ahzet

Condition: new, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,200 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Heben 7.30 s · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN · Wendelüfter Standard · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² Nedpfxsy E Ugpj Ahzoct · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: used, Year of construction: 2023, load capacity: 2,500 kg, lifting height: 5,850 mm, fork length: 1,200 mm, total length: 5,094 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB Nodpfey E Ugcjx Ahzoct ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 5,850 mm, fork length: 1,070 mm, total length: 5,120 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 Nsdsy E Ufxepfx Ahzect ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: used, Year of construction: 2022, load capacity: 25,000 kg, lifting height: 10,600 mm, total length: 8,650 mm, · Schüttwinkel 106 ° · Kippwinkel 10 ° · Wenderadius (über Räder) 5.50 m · Motornorm Stage V / Tier 4 · Anzahl der Zylinder / Tragfähigkeit der Zylinder: 4 - 4567 cm³ · Nennleistung Verbrennungsmotor / Leistung (kW) 157.34 kW / 155 kW · Max. Drehmoment / Motordrehzahl: 805 Nm@1500 rpm · Kühlsystem des Motors: Wassergekühlt · Anzahl Batterien 2 · Batterie / Batteriekapazität: 12 V / 120 Ah · Zugkraft: 20400 daN · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts): 2 / 2 · Max. travel speed: 25 km/h · Parkbremse: Automatische negative Parkbremse Njdpfx Aey E Uc Dohzect · Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen: 31.50 % / 57.70 % · Pumpenart: Verstellpumpe · Hydraulikfördermenge - Hydraulikdruck: 275 l/min - 350 bar · Motoröl 13 l · Hydrauliköl 290 l · Fassungsvermögen des Kraftstofftanks 315 l · Abgasnachbehandlung für Diesel (AdBlue®) 24 l · Geräuschpegel im Fahrerstand (LpA) 75 dB · Umgebungsgeräusch (LwA) 109 dB · Schwingungsbelastung Hand/Arm: < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 · Steuerungen: JSM · Anbaugeräte Erkennungssystem (E-Reco): Standard

Condition: used, Year of construction: 2023, load capacity: 4,500 kg, lifting height: 17,550 mm, total length: 7,400 mm, · Kippwinkel 10 ° · Schüttwinkel 107 ° · Lenkart: 2-rad Lenkung, 4-rad Lenkung, Crab Modus · Stützentyp: Flügeltyp · Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig Ncedpfxsy E Ucde Ahzot · Hersteller: Deutz · Motornorm: Stage V / Stufe 4 · Motor Modell: TCD 3.6 L4 · Nennleistung Verbrennungsmotor / Leistung (kW): 55.92 kW / 55.40 kW · Max. Drehmoment / Engine rotation (min): 405 Nm @ 1300 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder: 4 - 3620 cm³ · Kühlsystem des Motors: Wasserkühlung · Anzahl Batterien / Batterie / Batteriekapazität: 2 x 12 V / 120 Ah · Battery starting current: (EN)850 A · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 2 · Max. travel speed: 25 km/h · Zugkraft: 9400 daN · Parkbremse: Automatische negative Parkbremse · Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen: 44.50 % / 44.50 % · Pumpenart: Verstellpumpe · Hydraulikfördermenge: 116 l/min · Hydraulikdruck: 275 bar · Motoröl: 11 l · Hydrauliköl: 144 l · Fassungsvermögen des Kraftstofftanks: 130 l · Lärm und Vibrationen: Geräuschpegel im Fahrerstand (LpA): 68 dB · Außenschallpegel (LwA): 106 dB · Vibrationswert an Händen/Armen: < 2.50 m/s² · Diverse Lenkräder (vorne / hinten): 2 / 2 · Steuerungen: 2 Joysticks · Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) standard

Condition: good (used), Year of construction: 2015, Number of suction cups: 4 Maximum load capacity: 1500 kg Positive tilt angle: 8 Negative tilt angle: 8 Max. glass size: 3.21 m / Min. glass size: 2.20 m Max. glass width: 6.00 m / Min. glass width: 1.90 m Machine for installation Width: 2520 mm Height: 2400 mm Nsdpfx Aoy I Rwijhzjct Depth: 440 mm Weight: 472 kg Condition: good, second-hand

Condition: used, Year of construction: 2023, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,300 mm, - Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp: Dreifach-Teleskop - Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig - Motornorm: Stage V / Stufe 4 - Nennleistung Verbrennungsmotor / Leistung (kW) 211 Hp / 155 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ Ncsdpjy Ez Hiefx Ahzot - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with CVT - Getriebe Speedshift - Max. travel speed 40 km/h - Zugkraft 9300 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen: 29 % / 38.70 % - Pumpenart: Verstellpumpe - Hydraulikfördermenge: 185 l/min - Hydraulikdruck: 350 bar - Motoröl: 13 l - Hydrauliköl: 300 l - Fassungsvermögen des Kraftstofftanks: 320 l - Abgasnachbehandlung für Diesel (AdBlue®): 24 l - Geräuschpegel im Fahrerstand (LpA): 68 dB - Außenschallpegel (LwA): 109 dB - Vibrationswert an Händen/Armen: < 2.50 m/s² - Lenkräder (vorne / hinten): 2 / 2 - Steuerungen: 2 Joysticks - Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco): Standard

Condition: used, - Negative Refrigerator (Freezer) - Dimensions (WxDxH): 750x870x2210 mm -Serial No.: 23998 -Temperature:-20 °C -2 doors -Voltage: 230V -Refrigeration unit Nsdpfjwxynfox Ahzect -Refrigeration power: 0.59 kW -Refrigerant type: HFC Nsy Tdxuewxynfegsda Heating element -Heating power: 0.5 kW -Voltage: 230 V / 2.5 A -Weight: 230 kg -Year of manufacture: 1998

Condition: new, -Dimensions LxPxH: 1200x2200x1500mm -Vitrine de forme ovale avec un design sophistiqué -Finition en bois stratifié pour une esthétique raffinée et une intégration parfaite dans un environnement haut de gamme pieds en inox, assurant robustesse, durabilité et hygiène optimale *Système de Présentation : -Deux niveaux d’exposition : -Premier niveau (plateau réfrigéré) : 12 cloches en verre (Ø 23 cm) Nsdpjw Elr Aefx Ahzect Njyew Elr Ae Tdxugoda -Deuxième niveau (plateau supérieur ovale) : 4 cloches en verre (Ø 23cm) -Système breveté "No Fog", garantissant une transparence parfaite et sans condensation -Système d’élévation manuel des cloches, facilitant l’accès aux produits * Éclairage et Conservation : -Éclairage LED intégré, assurant une mise en valeur subtile et élégante des produits -Plateau réfrigéré intégré, garantissant une conservation optimale pour les produits frais -Hauteur totale :1500 mm (y compris les cloches) -Hauteur du premier plateau réfrigéré : 900mm (ergonomique et accessible) -Hauteur du deuxième plateau : 1200 mm -Hauteur des cloches en verre : 450 mm

Condition: excellent (used), -Dimensions: 1440x2700x2600 mm -Trolley: 600x800 -Model: E8/64 -Serial number: 9300038973 -Year: 04/2016 -Footprint: 2.71 m2 -Maximum temperature: 280°C Lroyjwxmf De Tdxuger Ncsdswxmf Dopfx Ahzet -Door clearance: 830 mm -Heating power: 57 kW -Voltage: 400 V -Weight: 1270 kg

Condition: excellent (used), -Dimensions: 1440x2700x2600mm -Chariot 600x800 -N°série:9300041424 -Modèle:E8.64 -Année:06/2016 Nodpswxmfwofx Ahzect -Surface au sol: 2,71 m2 -Température max: 280°C -Passage de porte: 830 mm -Puissance de chauffe: 57kW -Tension:400V

Condition: used, - Dimensions: 1440x2700x2600mm - Trolley 600x800 - Serial No.: 9300041424 - Model: E8.64 Nodpfx Aewtdd Tjhzect - Year: 06/2016 - Floor area: 2.71 m² - Max. temperature: 280°C - Doorway: 830 mm - Heating power: 57kW - Voltage: 400V - Weight: 1270 kg

Condition: excellent (used), - Brand: BONGARD - Model: 8.62E - External dimensions: 1430x1930x2220 mm - Tray size: 600x800 mm - Capacity: 150 baguettes - Electric - Power: 56 kW Nsdswxmgnjpfx Ahzect - Voltage: 400 V

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 3,500 kg, fuel type: diesel, empty load weight: 5,416 kg, total length: 4,540 mm, drive type: Diesel, Mast type: None Technical condition: New Front tires type: Air Front tires size: 16/70-20 Ncsdpfxevcf Umj Ahzet Rear tires Type: Air Rear tires Size: 12-16,5 CE certificate, STANDARD EQUIPMENT - Tiltable cab with tilt support - Safety belt with sensor monitoring - Audible reversing alarm - Emergency stop button - Rotating beacon - Hill holder - Hill start assist - Negative brake - Rear-view mirror - Steering wheel adjustable in inclination and depth - Joystick for overall control of all main functions - Armrest - Inching pedal - ECO Mode system - Digital display - Diesel filter with water separator FORKS - Fork 1.200 mm - Fork carriage plate 1,260 mm type FEM III - Integrated sideshift

Condition: excellent (used), - Brand: BONGARD - Model: 8.63E Ncedpfx Ahjwxmgbezet - External dimensions: 1430x1930x2220 mm - Tray dimensions: 600x800 mm - Capacity: 150 baguettes - Electric - Power: 56 kW - Voltage: Three-phase

Condition: excellent (used), - Brand: BONGARD - Type: 8.63E - External dimensions: 1430x1930x2220 mm Ncjdpfxswxmf Re Ahzst - Support dimensions: 600x800 mm - Capacity: 150 baguettes - Electric - Power: 56 kW - Voltage: Three-phas

Condition: used, Year of construction: 2022, load capacity: 7,000 kg, lifting height: 24,800 mm, total length: 8,870 mm, - Max. Tragkraft 7000 kg - höhe 24.80 m - Maximale seitliche Reichweite 20.50 m - Kippwinkel 12 ° - Schüttwinkel 110 ° - Drehung des Oberwagens 360 ° - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Motor Hersteller: Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FTT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 173 Hp / 127 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - 12V Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 - Max. travel speed 40 km/h - Zugkraft 9200 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 32.40 % / 41.40 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 300 l - Fassungsvermögen des Kraftstofftanks 320 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 67 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks Ncjdsy Eh Rhjpfx Ahzet - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: used, Year of construction: 2022, load capacity: 9,000 kg, lifting height: 6,840 mm, total length: 7,300 mm, · Feuerlöscher · Schüttwinkel 109 ° · Kippwinkel 15 ° · Wenderadius (über Räder) 4.72 m · Anzahl der Vorderräder / Hinterräder: 2 / 2 · Antriebsräder (vorne / hinten) 2 / 2 · Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang · Motornorm: Stage V / Stufe 4 · Anzahl der Zylinder / Tragfähigkeit der Zylinder: 4 - 4567 cm³ · Nennleistung Verbrennungsmotor / Leistung (kW): 143 Hp / 105 kW · Max. Drehmoment / Motordrehzahl: 602 Nm@1500 rpm · Kühlsystem des Motors: Wassergekühlt · Batterie 12 V · Zugkraft 10050 daN · Getriebetyp Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. travel speed 35 km/h · Parkbremse Automatische negative Parkbremse · Festellbremse: Ölbad Lamellenbremsen an den Vorder- undHinterachsen · Steigfähigkeit - beladen / unbeladen: 48.10 % / 37.40 % · Pumpenart: Verstellpumpe · Hydraulikfördermenge - Hydraulikdruck: 185 l/min - 270 bar · Motoröl: 13 l · Hydrauliköl: 151 l · Fassungsvermögen des Kraftstofftanks: 165 l · Abgasnachbehandlung für Diesel (AdBlue®) 20 l Ncjdpfsy Eh Rbex Ahzjt · Geräuschpegel im Fahrerstand (LpA) 75 dB · Umgebungsgeräusch (LwA) 107 dB · Schwingungsbelastung Hand/Arm: < 2.50 m/s² · Sicherheit Zulassung der Kabine: ROPS - FOPS Stufe 2 Kabine · Steuerungen: JSM

Condition: used, Year of construction: 1997, Suction nozzle diameter: 200 mm Maximum volumetric flow rate: 3,200 m³/h Nominal volumetric flow rate: 2,862 m³/h Volumetric flow monitoring: Differential pressure display Negative pressure: 2,336 Pa Filter surface area: 16.8 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: dB Chip bag volume: l Filter cleaning: Pneumatic Motor power: 4 kW Machine length: 2,300 mm Machine width: 900 mm Ncsdpfx Aex Edmvehzjt Machine height: 2,200 mm Weight: 350 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 30 kW (40.79 HP), filter area: 121.3 m², Extraction system Höcker Polytechnik Type: MultiStar JP5 Year: 2012 Capacity: 20,000 m³ Motor: 30 kW with briquetting press BrikStar c-3 18 Negative pressure system Filter surface area: 121.3 m² Filter bags: 100 pieces Bag length: 2,300 mm Bag diameter: 170 mm (outside, pressurized) Compressed air connection: 6.0 bar, 1" Operating pressure: 4.5 bar Compressed air consumption: approx. 216 Nl per bag row Footprint L x W: 2,540 x 2,420 mm Space required L x W: 3,500 x 3,380 mm Internal height: 4,430 mm Weight approx.: 1,960 kg Duct bend 90°, 2 mm, 900 x 800 mm, 1 pc Bolted design, galvanized steel sheet, 2 mm duct dimension 1: 900 x 800 mm, duct dimension 2: 900 x 650 mm, shape: asymmetric 460406 duct, 2 mm, 750 mm length, 900 x 800 mm - 2 pcs bolted, galvanized steel sheet, 2 mm 1 blank cover 2 mm, 900 x 800 mm 1 pc for MS xP on BrikStar Ncjdpoy Dukfefx Ahzst 1 pc 300 x 2,300 mm on existing briquetting press Manufacturer Gross (approx. 1,100 x 1,100 mm / press height: 1,260 mm)