Suction device

AL-KO Mobil Jet 100

Condition: used, Year of construction: 2009, Sawblade tiltable 45 ° Length of the rolling table 1800 mm cutting width 250 mm Motor output 2,5 kW Cutting height 80 mm Cutting height at 45° 53 mm Saw blade diameter 250 mm Speed 3800 U/min. weight of the machine ca. 100 kg Equipment: - Extraction system Kdjdoxcp N Dopfx Ag Ujn - Saw blade - Parallel guide - Operating instructions

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: Ksdpfx Agoyk I U Aj Ujdn 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: new, Year of construction: 2025, TECHNICAL SPECIFICATIONS height of center 330 mm distance between centers Spindle bore 103 mm Swing over bed 660 mm Swing in the gap 840 mm Swing over Slider 420 Speed range 36 - 1600 rpm (12 steps) Spindle nose ISO 702 / II No. 8 Range of longitudinal feeds 0.063 - 2.52 mm / rev (65 steps) Range of feed rates 0.027 - 1.07 mm / rev (65 steps) Metric threads 1 - 14 mm (22 steps) Kdedpfxedzzw Uj Ag Usn Inch thread 28 - 2 speed / inch (25 steps) Module thread 0.5 - 7 mm (18 steps) Diametrical thread 56 - 4 DP (24 steps) Quill diameter 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 11 kW Weight 3.050,00 kg Dimensions 3135 x 1050 x 1450 mm

Condition: good (used), Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Kdjdpfsx A Hdxex Ag Ujn Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Windows XP operating system - color video - alphanumeric keyboard - USB port - interpolation Work table with 3 sliding clamps for locking workpieces Installed power 12 Kw Suction mouth diameter 120 mm Compressed air 7-8 bar Overall dimensions for transport mm 4100 x 1500 x 2100 h Machine weight 1400 kg Electrical panel 250 kg

Condition: new, Year of construction: 2025, heavy-duty construction with cast iron table smooth movements using hand lever and handwheel eccentric clamping device dowel drilling unit with 16-22-25-32 mm grid 2 spindle speeds: 1500/3000 rpm WESCOTT drill chuck 1 - 16 mm CE compliant Kodpfxjycg U Eo Ag Uodn Work table dimensions: 287 x 550 mm Longitudinal travel: 200 mm Vertical travel: 160 mm Cross travel: 125 mm Three-phase motor power: 1.8 kW, 400 V, 50 Hz

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 20,000 m³/h, filter area: 160 m², total height: 8,000 mm, total length: 2,400 mm, total width: 2,500 mm, Self-cleaning bag filter - NEW - Airflow capacity: 20,000 m³/h Dimensions: approx. 2500 x 2400 x H 9000 mm Total filter media surface: 160 m² Filter media type: antistatic Filter media cleaning by reverse air jet, control via sequencer unit - Screw conveyor, rotary valve for discharge of filtered material into big bag collection system Kdjdpfx Aexu Dh Sog Uon - Electrical control panel for the machine - Suction fan, power to be defined with end user - Discharge fan for filtered material, power to be defined with end user Machine supplied with CE declaration, operating and maintenance manual.

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used Kdodpfx Aoy A D Ecog Usn If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Kedpfx Aexn Tilsg Uodn Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2021, Technical data: ALKO clean air mobile extraction unit, Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Inlet diameter: Ø=120 mm, Sound insulated, Mobile separation drum: 135 l, Kdedpfx Ajw T U Uzjg Uen Manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust drum volume: 135 liters, Weight: 117 kg, Nominal airflow (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3030x360x660 mm Kdjdpfx Agjv A Hwvj Ujn Weight 220 kg Total power requirement 0 kw