Used Rea Rea Jet Hr 2K G2 for sale (8,318)

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,096 h, TERRA-Jet DJ10 Drilling Rig, Horizontal Boring Machine, TERRA Mixing Station, TERRA Locating System Used, from business liquidation Technical data and information according to the manufacturer: TERRA-Jet DJ10 Drilling Rig, Year of manufacture 2021 Operating hours: 3,096 total hours 95 ltr/min (EU Stage 5) Controllable horizontal drilling rig (HDD) Nwedpfx Asz H Umgebusn Torque: 1,800 Nm, 180 rpm Drilling force: 41.5 kN (4.2 tons) Pull force: 41.5 kN (4.2 tons) Max. drill string speed 180 rpm Hatz diesel engine with 55 kW (75 hp) including particulate filter Emission stage EURO Stage 5 Engine speed only 1850 rpm FMC pump on board Max. flushing volume 95 ltr/min Max. flushing pressure 35 bar TERRA Mixing Station MS700, Year of manufacture 2021 For injecting bentonite into the flushing fluid via an injector (Venturi nozzle) Mixing capacity 700 ltr/min at max. 2.6 bar Fire hose, drill string, probe housing 70 Side loader (DJ10), control plate adapter (DJ10) 3-finger head, tow hitch TERRA Locating System FalconF2+, Year of manufacture 2021 Broadband locating system with FCD monitor Longlife battery ø25/L99 Falcon F2+/F5+ probe (FT2+) L= 381mm, ø32 mm Apart from signs of wear, the TERRA-Jet DJ10 is in a generally good condition, considering its age and use. We recommend an inspection. Information without guarantee. Data, information and technical specifications from the manufacturer. To avoid any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 am - 12:00 pm and 1:00 pm - 4:30 pm. During this time, inspections and collections are possible and desirable AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Condition: used, For sale is a guide vane stirrer from VEM Motors GmbH. It is the VDE 0530 T1/7.91 model. Stirrer specifications: RPM: 1475 V: 380 kW: 20 Nsdpsga D Ifefx Abuswn Shaft length: 800mm Shaft diameter: 95mm Overall length: 2030mm Impeller diameter: 450mm Connection: DN400

Condition: used, Two Ystral inline mixers are for sale. Mixer data: RPM: 1465 V: 230 / 400 kW: 11 Shaft length: 560 mm Overall length: 1220 mm Impeller diameter: 360 mm For more information, see the data sheet. Nwjdpfjga D I Ujx Abujn

Condition: used, Electric motor, three-phase motor Nwodpfsgzwxzsx Abujn -Manufacturer: Himmel, electric motor from saw-drill / milling machine Rapid DGL / BFA -Type: 2 HR 80 -Power: 1.3 kW -Speed: 2820 rpm -Shaft: Ø 19 x 40 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 270/200 / H250 mm -Weight: 11 kg

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Njdpeg N Nlvsfx Abuown Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, geared motor with brake -Type: SA57 DT90S4/BMG/HR/TF/IS -Speed: 48 rpm -Power: 1.1 kW / 1380 rpm -Hollow shaft: Ø 30 x 150 mm -Protection class: IP54 -Brake: 20 Nm -Dimensions: 550/197/H230 mm Njdpfxem Hd Sbe Abuswn -Weight: 37 kg

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: SEW-Eurodrive, spur geared motor with brake -Type: R42 DT90L2BMG/HR/TF/VS -Speed: 250 rpm -Power: 2.2 kW -Shaft: Ø 25 x 50 mm -Protection rating: IP54 -Brake: 20 Nm -Dimensions: 540/260/H200 mm -Weight: 34 kg Nwedpfxoqux N Tj Abuon

Condition: used, Year of construction: 2012, Overview The filler was built in 2012 by Italian manufacturer Framax. The filler comes with a Framax labelling machine. The machines have been regularly maintained and is already dismantled. Both machines can be viewed in person. Techn. Details Capacity: 1,800 bph (max. 2,200 bph) Processed format: 0,33 L Crown cap Filling monoblock | Framax | RFC‐09/08/1‐C 2K A/P | 2012 Rinser positions: 9 Filler positions: 8 Capper positions: 1 Suitable for natural beer Type of filling valve: EVO2 (15 mm) Max. diameter of bottle: 115 mm Min./ Max. height of bottle: 200 mm/ 350mm Dimensions: Length: 4,500 mm Width: 1,250 mm Height: 2,500 mm Nodjrlf Tqepfx Abujwn

Year of construction: 1977, condition: used, Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S Nwodpjtigw Njfx Abuon -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm -Weight: 200 kg

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,215 mm, overall weight: 620 kg, controller manufacturer: SIEMENS, controller model: Sinumerik ONE, number of slots in tool magazine: 40, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material: Nsdpfxex D E Hbo Abujwn

Condition: like new (used), TA Instruments Discovery HR-1 – Hybrid Rheometer with Temperature Chamber Technical description of the device Manufacturer: TA Instruments, USA Model: Discovery HR-1 Series: Discovery Hybrid Rheometer Device type: Rotational-oscillatory rheometer Temperature system: Two-wing heating chamber, possibly an ETC (Environmental Test Chamber) Technical characteristics The TA Instruments Discovery HR-1 is an advanced hybrid rheometer designed for the precise investigation of the rheological properties of liquids, semi-finished products, polymers, pastes, gels, and viscoelastic materials. The device enables measurements in controlled stress mode, controlled shear rate mode, and oscillatory testing. The rheometer's design utilizes a precise drive system, a torque measurement system, and a gap control system. Nodox E Sm Hjpfx Abuewn Technical parameters – Discovery HR-1 The following values are approximate catalog parameters for the HR-1 model and require confirmation for a specific device version. Parameter | Value ----- | ----- Type of measurement | Rotational and oscillatory Minimum oscillatory torque | approx. 0.5 nNm Minimum rotational torque | approx. 10 nNm Maximum torque | 150 mNm Angular speed range | up to 300 rad/s Oscillatory frequency range | up to 100 Hz Angular displacement resolution | approx. 10 nrad Gap control | Automatic Control modes | Stress, shear rate, oscillation Computer control | TA Instruments TRIOS software Temperature control system The device shown in the pictures is equipped with a two-part heating system that opens to the sides. The chamber enables rheological measurements to be carried out under controlled temperature conditions. System characteristics: * Two-wing design of the heating chamber. * Electric heating system. * Temperature control of the sample. * Possibility of conducting temperature studies. * Thermally insulated chamber elements. * Connections for the temperature control system. If the use of an ETC chamber is confirmed, the typical temperature range may be approximately -160°C to +600°C, depending on the configuration, cooling system, and accessories used. This range is not confirmed for the offered unit. Available research methods Rotational studies: * Viscosity measurement as a function of shear rate. * Determination of flow curves. * Study of the yield point. * Analysis of the behavior of non-Newtonian materials. Oscillatory studies: * Measurement of the storage modulus G'. * Measurement of the loss modulus G''. * Analysis of the loss tangent tan δ. * Frequency tests. * Amplitude tests. * Analysis of structural transitions of materials. Time and temperature studies: * Creep and recovery tests. * Stress relaxation. * Thermal stability studies. * Analysis of changes in rheological properties as a function of temperature and time. Configuration of the offered device Based on the photographic documentation, the set includes: 1. TA Instruments Discovery HR1 rheometer 2. Two-wing temperature chamber. 3. Accessories visible in the pictures 4. PC and software The device is a professional measurement platform designed for advanced rheological analyses in industrial and scientific laboratories.

Condition: new, machine/vehicle number: 20260102009, fuel type: diesel, motor manufacturer: Cummins 4BT3.9-G2, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 1.102 kg Functional Generator capacity: 45 kVA Dimensions of cargo space: 229 x 95 x 125 cm CE mark: yes Other information Fuel consumption: 5.2 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A42 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 55 l Production country: CN Nwedpfxeyxkvto Abuon Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, machine/vehicle number: 20260102011, fuel type: diesel, power: 50 kW (67.98 HP), motor manufacturer: Cummins 4BTA3.9-G2, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 1.176 kg Nsdsyy H T Rspfx Abujwn Functional Generator capacity: 55 kVA Dimensions of cargo space: 250 x 100 x 125 cm CE mark: yes Other information Fuel consumption: 10 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A42 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 87 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2020, machine/vehicle number: PST42, Used HRS pasteurizer cold-fill 8000 LPH - Year 2020Technical Specifications & Performance DataThis HRS cold fill pasteurizer unit is designed for thermal treatment within beverage production and industrial packaging processes. Built for cold-fill applications, it provides a controlled pasteurization stage before or during integration with a used bottling line. The unit has a stated processing capacity of 8000 LPH and was manufactured in 2020.Manufacturer: HRSEquipment: Cold Fill Pasteurizer Unit IICapacity: 8000 LPHYear: 2020Electrical supply: 420V / 50HzConfiguration: 1X8 - MI120 - 8916 - 8000 - 316/316Additional configuration lines: 1X12 - MI120 - 8916 - 8000 - 316/316; 1X1 - K50 (2P) - 219/16 - 750 - 304/316Construction materials indicated: 316/316 and 304/316 stainless steel gradesAdvanced Automation & Control SystemsThe pasteurizer is configured for a 420V, 50Hz electrical supply. In a beverage production environment, a pasteurization unit is typically connected to line controls and process instrumentation to maintain stable thermal treatment parameters and coordinate product flow with upstream and downstream bottling equipment.Control, monitoring and interlocking arrangements should be assessed during installation planning in relation to the intended production line layout and operating procedures.Production Line Integration CapabilitiesA cold fill pasteurizer is a process-stage machine suited to integration with industrial packaging and bottling equipment. It can support product preparation and thermal processing ahead of filling, or be incorporated into a wider beverage production system according to the required process flow.Its 8000 LPH capacity provides a clear basis for matching the unit with compatible filling, conveying, storage and downstream packaging machinery. Integration should consider product transfer piping, hygienic connections, buffer capacity and synchronization with the selected bottling line throughput.Machine Condition & Maintenance HistoryThe unit was manufactured in 2020. No run-hour meter is installed, and no operating-hour reading is available. The equipment includes visible stainless-steel process piping and vessel or tank components.As with any second hand pasteurization equipment, commissioning should include inspection of product-contact surfaces, seals, pumps, instrumentation, electrical connections and process circuits before production use.Operational Performance & VersatilityThis pasteurizer is intended for cold-fill thermal processing applications in beverage production. Pasteurization equipment of this type is used to support controlled treatment of liquid products while maintaining a hygienic process path through stainless-steel piping and process components.The indicated 316/316 and 304/316 material designations support its suitability for demanding hygienic process environments. Final product compatibility depends on the process recipe, required pasteurization profile and the complete line configuration.Installation Requirements & Site Preparation Njdpfxo Adtq Es Abuown

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Nsdpfx Abshby Riouewn Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: used, Year of construction: 2017, functionality: fully functional, Rotox FWS 381 Njdpezpygysfx Abujwn

Condition: good (used), Brand: Videojet Nwjdpfxsyt Hmpe Abusn Type: Inkjet Marking Machine Model: Excel 2000

Condition: ready for operation (used), Heidenhain HR 420 handwheel, part number 375 2639-01, serial number 19931995B, with connection cable. The cable has been repaired/insulated (see photos). Used, in good condition, 100% functional. Scope of delivery as shown in the photos. Njdpozkxhlefx Abuswn

Year of construction: 2014, operating hours: 4,000 h, condition: used, Operational machine with low hours! Nedpfx Abjy R Dc Doujwn Ask for additional information!

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2466718, load capacity: 280 kg, overall weight: 14,650 kg, transport length: 9,280 mm, transport width: 2,490 mm, transport height: 2,700 mm, fuel type: electric, color: green, Equipment: all wheel drive, Technical specifications: Year of manufacture: 2020 Engine: Electric, 48 kW Working height: 28.00 m Platform height: 26.00 m Platform width: 0.90 m Platform length: 2.40 m Reach: 19.00 m Overall dimensions (L x W x H): 9.28 m x 2.49 m x 2.70 m Nwsdpfoyxm Uxox Abujn Load capacity: 280 kg Gradeability: 40 % Travel speed: 4.70 km/h Total weight: 14,650 kg General signs of wear and tear, fully functional.

Condition: used, Type: HR 336 C . 285 378 - 21 Serial No. 8 117 256 B Including connection cable Nodpew Dgh Njfx Abuown

Condition: used, mileage: 1,001 km, first registration: 01/1995, color: orange, driver cabin: other, gearing type: other, loading space volume: 12 m³, loading space length: 5,350 mm, loading space width: 2,300 mm, loading space height: 1,020 mm, Year of construction: 1995, Vehicle location: Bovenden, steel superstructure, jet drop sides, flap Nedovhgy Ijpfx Abuown Body: Meiller body approx. 12.5cbm. Dismantling from vehicle DB ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Year of construction: 2006, Brand: GEMINIS Model: GHT4 G2 700x 2000 Cnc: FANUC 21 TB Distance between centers: 2000 mm Ø Swing over bed : 720 mm Ø Over carriage: 470 mm Nwjdpfx Aexdub Iobuen Spindle diameter : 104 mm Maximum piece weight between points : 2.560 kg Spindle nose: DIN 55027-11 Spindle speed: 0-1600 m/min Total power : 28 kw

Condition: new, empty load weight: 135 kg, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, permissible axle load (axle 1): 750 kg, loading space length: 3,600 mm, total length: 4,645 mm, total width: 1,754 mm, suspension: other, tire size: 155/70 R13, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Single-Axle Trailer 750 kg (Payload approx. 600 kg) For jet ski transport or boats up to 3.6 m in length Manufacturer: Thomas Trailers BT-750-JET Brand-new trailer, 2-year manufacturer's warranty First registration: 3 years TÜV 100 km/h road approval* Registration documents (COC certificate and 100 km/h manufacturer's certificate) Available immediately! Financing available! Delivery at an additional charge! Welded, hot-dip galvanized frame Paint finish in ANTHRACITE GREY KNOTT rubber suspension axle, adjustable position WPS version – waterproof and maintenance-free wheel hubs Tyres 155/70R13 on steel rims Padded support boards, 180 cm length, adjustable KNOTT strap winch, adjustable 4 lashing eyes, adjustable position Jockey wheel 13-pin electrical connection LED lights, side hinged, waterproof LED position lights white/red Plastic mudguards Technical data: Gross vehicle weight: 750 kg Unladen weight: approx. 135 kg Payload: up to 615 kg Drawbar load: 50 kg Total length: approx. 4645 mm Njdpfxsx Uq Die Abuewn Overall width: approx. 1754 mm Width between mudguards: approx. 1355 mm Frame width: approx. 1235 mm Aluminium rims + EUR 200.00. Trailer available immediately. Delivery possible for an extra charge! Trailer also available in other colours. Offer price incl. 19% VAT. Unbraked boat trailers with 500 kg and 750 kg available straight away. Braked trailers from 1,300 kg to 2,500 kg also available immediately. Offer and further information on request: Office Tel. +49 (0) 2254/83718-20 Specifications subject to change, errors and prior sale excepted. Pictures may show optional equipment at extra cost. *Please observe national legal requirements regarding weight and speed restrictions.

Condition: good (used), Double reel, reel, unwind reel, motorized reel for sheet metal processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, sheet metal unwinder Nwsdpfx Aehfavujbuen -Manufacturer: OBRU, height-adjustable reel with drive -Diameter/Width: adjustable, see photos -Dimensions: 750/730/H1130 mm -Weight: 114 kg