EMCO Hyperturn 65 Powermill G2
EMCO Hyperturn 65 Powermill G2

Name: EMCO Hyperturn 65 Powermill G2
Brand: EMCO
Availability: InStock

Year of construction

2022

Condition

Used

Location

Austria

EMCO Hyperturn 65 Powermill G2 EMCO Hyperturn 65 Powermill G2

Show map

Machine data

Machine type:: EMCO Hyperturn 65 Powermill G2

Manufacturer:: EMCO

Model:: Hyperturn 65 Powermill G2

Year of construction:: 2022

Condition:: ready for operation (used)

Price & Location

Location:: , Austria

Call

Technical details

Spindle motor power:: 29,000 W

Spindle speed (max.):: 5,000 rpm

Overall weight:: 620 kg

Number of axes:: 6

Details about the offer

Listing ID:: A20701985

Reference number:: AT-TUR-EMC-2022-00001

Update:: 22.01.2026

Description

This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information.

• Main spindle (direct drive):
• Max. torque: 250 Nm
• Subspindle (direct drive):
• Max. drive power: 29 kN (as provided)
• Max. torque: 250 Nm
• Speed range: 0–5000 rpm
• Milling spindle (direct drive):
• Max. drive power: 37 kW
• Max. torque: 30 Nm
• Speed range: 0–12000 rpm
• Tool turret (direct drive):
• Max. drive power: 10 kW
• Max. torque: 30 Nm
• Speed range: 0–12000 rpm
• Kinematics and axes:
• Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning
• Y-axis travel: +/- 120 mm
• B-axis with direct drive: +/- 120°, hydraulic clamping
• Tooling:
• 40-position tool magazine, HSK-T63
• 12-position radial turret with direct drive, BMT55P tool interface
• Spindles and clamping:
Lhsdox D E Hbepfx Ahzob
• High-clamping cylinder with draw tube for main spindle
• Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle
• Programmable clamping pressure for main and counter spindle
• External feed flushing on main and counter spindle
• Mechanical holding brake on main and counter spindle
• C-axis for main and counter spindle
• Control and HMI:
• SINUMERIK ONE / OPERATE, EMCONNECT app-based UI
• 22" multi-touch display
• IPC with 240 GB
• SHOPTURN dialog programming
• 3D simulation and Drawing
• Residual material detection
• Unblocking from external memory
• CAD reader (DXF import)
• TRANSMIT and TRACYL for C-axis programming
• USB interface, Network drive (Ethernet)
• PC keyboard incl. HMI hotkey
• LED status bar
• Fluids and utilities:
• 2 coolant lines at 25 bar
• 2 flushing pumps at 4.3 bar
• Control cabinet air conditioning unit
• Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive
• Hydraulic unit
• Machine light
• 8 leveling elements
• Feedback/measurement:
• Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl)

Additional equipment

• Chip management and filtration:
• Hinged belt chip conveyor, discharge height 1200 mm
• Belt filter system, 980 liters
• Dirty water pump
• Control/monitoring options:
• BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers)
• EMCO tool breakage and wear monitoring / B40D-SL
• Wireless probe / HSK drill breakage control BK-MICRO
• 4-axis turning / balance cutting (SINUMERIK option)
• Alternative-end spindle speed (SINUMERIK option)
• Turret as tailstock (SINUMERIK option)
• Counter spindle as tailstock (SINUMERIK option)
• Bar feeder (specifications as provided):
• Bar length: 300–1200 mm
• Bar diameter: 10–104 mm
• Material support surface (front view): 800 x 1250 mm
• Material capacity: 12 bars with 65 mm diameter
• Max. load capacity: 400 kg (max. 74 kg/bar)
• Rectangular material: min. edge length 6 mm; max. circumference 105 mm
• Hexagonal material: SW 5 to 85 mm
• Round material:

Seller

Last online: Yesterday

Registered since: 2017

1,377 listings online

Call

Send inquiry

Telephone & Fax

+49 631 7... show

These listings may also fit your interest.

Listing

CNC travelling column bed-type milling machine Soraluce FL 8000

Saterland

772 km

CNC travelling column bed-type milling machine
SoraluceFL 8000

Call

Condition: like new (used), Year of construction: 2014, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,200 mm, 1 as-new CNC travelling column bed milling machine Brand: Soraluce Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 2200 mm C-axis travel: 360 degrees Table clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Spindle speed up to: 4000 rpm Main drive: 43 kW Lhjdpfswzx Ntsx Ahzsb Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Tool magazine CNC-controlled universal milling head Chip conveyor Full enclosure Complete coolant system Electronic handwheel Internal coolant supply (IKZ) Indexing clamp Rotary carousel table D=1600 mm, 250 rpm Table area 6000 x 2000 mm Face slide, etc.

See details

Listing

Ciriè

1,372 km

Work center
ParpasXS63

Call

Listing

Germany

1,137 km

CNC Lathe
EMCOTurn 365/42

Call

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Lsdpju Ixwisfx Ahzshb Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

See details

Listing

Uttendorf

1,389 km

CNC lathe
DMG MORICLX 350

Call

Listing

CNC turning and milling center DMG MORI CLX 450 TC

Velbert

828 km

CNC turning and milling center
DMG MORICLX 450 TC

Call

Condition: excellent (used), Year of construction: 2023, CNC Milling and Turning Center Machine type: DMG Mori CLX 450 TC Control: Siemens 840 D sl Operate Slimline Year of manufacture: 2023 TECHNICAL DATA: Max. turning length: 1,100 mm Turning diameter: 400 mm Main spindle: ISM 65 Speed range: 5,000 rpm Drive power: 14 / 17 kW Torque: 275 / 345 Nm Spindle nose: A2-8 Bar capacity: 67 mm C-axis CNC spindle swiveling for milling and turning operations Lhodpfx Ahjx Ryw Rezjb Max. speed: 12,000 rpm Drive power: 8.8 / 10.5 kW Torque: 73 / 90 Nm Tool holder: HSK 63 Tool positions: 60 Counter spindle: ISM 65 Spindle nose: A2-8 Max. speed: 5,000 rpm Drive power: 14 / 17 kW Torque: 275 / 345 Nm C-axis X-axis: 750 mm Y-axis: +/- 100 mm Z-axis: 1,100 mm B-axis: +/- 120 mm Features: Chip conveyor Direct position measuring system Chip flushing gun 3-jaw chuck: SMW-Autoblok BBD 250/78 mm 3-jaw chuck: SMW BBD 250/78 mm Tailstock function on counter spindle High-pressure pumps: 8 bar / 20 bar Coolant tank: 600 l Oil mist extraction Probe: Renishaw RMP 40

See details

Listing

Szigetszentmiklós

1,788 km

CNC lathe
EMCO turnE45

Call

Condition: excellent (used), Year of construction: 2011, EMCOturn E45 CNC lathe with C-axis Year: 2011 turning diameter 220 mm turning length 310 mm control Siemens 828D turning diameter over bed 430 mm spindle bore 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Positions C-axis driven tools total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ab. ca. 3.300 kg Accessories/options: - C-axis and driven tools - driven tool holders axial and radial - static tool holders - documentations - backup - footpedal Lhjdexvcrxjpfx Ahzsb - tailstock - parts cather - 3-jaw hydraulic chuck - coolant tank Runned hours: 8173 Under power in our warehouse!

See details

Listing

Universal machining center DMG MORI DMU 60 evo

Trittau

913 km

Universal machining center
DMG MORIDMU 60 evo

Call

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Ljdpfx Asxgnz Tehzohb Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

See details

Listing

CNC turn-mill center DMG MORI CTX beta 1250 TC

Auw bei Prüm

866 km

CNC turn-mill center
DMG MORICTX beta 1250 TC

€135,000

ONO plus VAT

Call

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 500 mm, turning diameter: 390 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 1,300 mm, bar passage: 65 mm, total height: 2,700 mm, total length: 7,000 mm, total width: 3,000 mm, overall weight: 12,000 kg, Equipment: documentation/manual, Manufacturer: DMGMORI Type: CTXbeta1250TC Year of manufacture: 2008 (retrofit in 2022) Control: Siemens 840D Solutionline Number of axes: 5 axes Equipment: - automatic tool changer - swivel head as B-axis - belt filter system with internal cooling and chip conveyor - differential pressure clamping main/counter spindle - workpiece collection device - preparation for bar loader (optionally available) Technical data: Max. turning diameter 500 mm X-axis 450 mm Y-axis 100 mm Z-axis 1300 mm B axis 220 ° Spindle bore 65 mm Speed 5000 rpm Lhodpfxjubyv Re Ahzjb Spindle power 34 kW Counter spindle speed 6000 rpm Counter spindle passage 52 mm Counter spindle power 20 kW Tool changer 24 B-axis mount HSK 63 B-axis spindle speed 12000 rpm B-axis power 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant device: Yes Internal coolant supply: Yes Options: · Full cabin · NC swivel head as B-axis · Coolant device and chip conveyor · Documentation · Geometrically within the new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer's tolerance for new machines - All wear parts replaced Retrofit 2022: - Linear guides Z1 and Z2/3 replaced - Linear guide Y-axis replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) renewed - sliding plates overhauled - hoses and cables overhauled, drag chains revised - cabin doors repainted, viewing windows renewed - maintenance carried out according to manufacturer's specifications

See details

Listing

CNC Turning- and Milling Center Mazak Integrex 200 IV STx1500

Germany

1,034 km

CNC Turning- and Milling Center
MazakIntegrex 200 IV STx1500

Call

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Lhjdpfx Asx Ih Dgehzeb

See details

Listing

CNC turning and milling center EMCO MAXXTURN 65-G2 SMY

Jakling

1,590 km

CNC turning and milling center
EMCOMAXXTURN 65-G2 SMY

Call

Condition: like new (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: Lhjdpfxox E Dncj Ahzsb - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

See details

Advertise here