Used S.a.g. T-4 for sale (97,344)

Condition: excellent (used), Year of construction: 1980, spool width: max. 1.600 mm spool ID: 150/250/400 mm coil weight: max. 4 t Bsdpowzuwtefx Al Iolg coil OD: max. 1.250 mm year: approx. 1980

Condition: new, Year of construction: 2012, strip width: max. 600 mm strip thickness: max. 3 mm coil weight: max. 4 t coil OD: max. 1.500 mm mandrel Ø: 508 mm year: 2012 (never used) Bjdpfx Aowzu E Del Ielg

Condition: new, Year of construction: 2012, strip width: max. 600 mm Bledpswzu Edofx Al Ieg strip thickness: max. 3 mm coil weight: max. 4 t coil OD: max. 1.500 mm mandrel Ø: 508 mm year: 2012 (never used)

Condition: good (used), Year of construction: 1973, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, Hydraulic 4-column press, manufacturer FIBRO, year of manufacture 1973, pressing force 315 t. Dimensions approx. 3.0 m × 1.6 m × 4.5 m. Table size: 2.5 m × 1.5 m. Separate hydraulic unit and control panel. Maximum working area 883 mm (ram fully retracted). Bedpjx Nhakjfx Al Iolg Powered, can be inspected on site. All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Year of construction: 1979, condition: not inspected (used), Hahn & Kolb Variomatic 12 station indexing table automat -WKG 443- Bjdpfxehg Nkro Al Iolg Offered here is an automatic indexing plate machine from the company Hahn&Kolb. Technical data: Manufacturer: Hahn&Kolb Type: Variomatic T 4-12 Year of manufacture: 1979 Table: Ø 630mm Units: 1x spindle unit, 1x slide unit, 8x quill units Chuck outer diameter: 135mm Max. Workpiece clamping width: 80mm Max. Drilling capacity in steel: 16mm

Condition: excellent (used), Parallel-guided, water-cooled table spot welding machine Manufacturer: DALEX, Model: PMS 10-4 T With single-acting cylinder Throat depth: 350 mm Rated power at 50% duty cycle: 32 kVA Secondary short-circuit current: 38.3 kA Secondary open-circuit voltage: 2.3 - 4.6 V Electrode force: 65-390 daN 8-step selector switch Foot pedal Machine table with CrNi stainless steel shelf External controller MPS 200 Bledpfx Aloxxaz Nj Ijg Operating manual in German

Year of construction: 1993, condition: used, machine/vehicle number: 101793 , Palletfeeder PD 78-T 4 Buckles (manual) 3 Folding Knives Up to 32 pages folding Horizontal Stack Delivery SBP46 Bodpfok Izq Eex Al Ielg

Year of construction: 1999, condition: used, Palletfeeder PD 78-T 4 Pockets 4 Pockets (BUH 56) 2008 6 Pockets (MAD-66/6-T) 2001 Pressdelivery SBP 46 Stahl SAK 78.S Stream Delivery Stahl VFZ 52.2 Mobile Knife ( 1996) Bjdpfx Aljk Izq Nj Ielg

Condition: used, Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table width: 1,000 mm, table length: 510 mm, spindle speed (max.): 15,000 rpm, Hurco VMX 30 T CNC machining center with additional 4th CNC rotary axis Year of manufacture 2011 Serial No. M34216027081EHC Frame No. H-30688 Hurco Winmax control system Table size 1,000 x 510 mm 3 axes, X/Y/Z travel 750 x 510 x 510 + 4th rotary axis Max. table load 1,350 kg Max. spindle speed 15,000 rpm Tool holder SK 40, 24-station tool changer, coolant system, chip conveyor Bledpfswgbfujx Al Ijg

Condition: excellent (used), 24 running meters of pallet rack SSI Schaefer Palflex incl. insertion grid second hand, good condition, see pictures height 4 m depth 105 cm beam length 2,95 m Load / compartment 2400 kg Frame galvanized, beam red Negotiable price: € 2.890,-- net ex stock Offer consists of: + 9 pcs. frames pre-assembled, 12t field load, depth 105 cm, height 4 m + 32 pcs. beams, length 2,95 m, 2400 kg payload/slot + 64 pcs. suspension locks + 18 pcs. concrete anchors + 48 pcs. insertion grids / depth supports for 16 levels à 2,95m Load plate Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast - flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo! Bljdpfeiauh Tjx Al Ijg

Year of construction: 2026, condition: new, Bosporas Machinery | AYIKA is a manufacturer of coil processing lines, roll forming lines and press feeding systems, offering high-quality and customized industrial solutions. High-performance heavy-duty cut to length line designed for precise sheet cutting with advanced configurations and up to 20-ton coil capacity. TECHNICAL DETAILS Sheet Thickness: 0.5 – 3 mm / up to 4 mm (heavy-duty configuration) Coil Width: up to 1500 mm Coil Weight: up to 20 tons Cutting / Shear Type: Gear Driven Guillotine Shear, Pneumatic Clutch Eccentric Shear, Hydraulic Shear, Rotary Shear Line Speed: up to 40 m/min (depending on configuration) Leveling System: Multi-Rollers Fine Straightener, Precision Straightener (Leveler) Stacking System: Automatic stacker (single or double stack option) Material Type: CR, HR, Galvanized, Stainless Steel, Aluminium, Hot Rolled Steel, Cold Rolled Steel This heavy-duty cut to length line is designed for precise and efficient processing of steel coils with widths up to 1500 mm and coil weights up to 20 tons. The system ensures high accuracy, stable operation and long-term reliability in industrial production environments. The line consists of integrated units including hydraulic decoiler, coil loading system, leveling unit, feeding system, cutting unit, conveyor system and automatic stacking unit. CONFIGURATION & FLEXIBILITY The system can be configured based on production requirements and material specifications: 0.5 – 3 mm standard duty configuration up to 4 mm heavy-duty configuration Different cutting technologies can be applied depending on production speed, accuracy and material type: Gear Driven Guillotine Shear Pneumatic Clutch Eccentric Shear Hydraulic Shear Rotary Shear The line can also be designed with single or double loop pit systems to optimize line speed, material flow and plant layout. Blodpfx Aloyy R Rmo Ijg KEY FEATURES Heavy-duty design for 20-ton coils High precision sheet cutting Advanced leveling system for flatness control Cutting options Automatic stacking and conveyor systems Robust mechanical structure for long service life ENGINEERING & PERFORMANCE The machine is built with a robust mechanical structure and high-quality components to ensure long-term operation under heavy-duty conditions. The precision leveling system eliminates internal stresses and improves flatness, enabling accurate and repeatable cutting results. Advanced automation and control systems provide stable operation, reduced operator dependency and efficient production management. OPERATIONAL ADVANTAGES Short lead time compared to European manufacturers High production efficiency and continuous operation Low maintenance requirements Flexible and customizable design Reliable performance in demanding industrial conditions APPLICATION AREAS Steel service centers Automotive and metal component production Construction and infrastructure materials General sheet metal processing OPTIONAL EQUIPMENT Double stacker system Vacuum stacking system Coil handling and transfer systems Advanced automation solutions *Images included in this listing show reference installations of similar cut to length lines (3 mm and 4 mm thickness ranges) successfully manufactured and commissioned in recent years across different countries. These references demonstrate our proven engineering capability, reliable manufacturing quality and international project experience.

Year of construction: 2026, condition: new, Bosporas Machinery | AYIKA is a manufacturer of coil processing lines, roll forming lines and press feeding systems, offering high-quality and customized industrial solutions. Heavy-duty coil slitting line designed for high precision cutting of steel coils with customizable thickness configurations up to 4 mm. TECHNICAL DETAILS Coil Thickness: 0.3 – 3 mm / up to 4 mm Coil Width: 300 – 1500 mm Coil Weight: up to 20 tons Slitting Speed: up to 100 m/min Slitting Accuracy: ±0.1 mm Minimum Slitting Width: min. 50 mm Material Type: CR, HR, Galvanized, Stainless Steel, PPGI, Cold Rolled Steel, Aluminum This coil slitting line is designed for high-precision slitting of steel coils with heavy-duty capacity and reliable performance. It is suitable for processing materials 3-4 mm thickness, up to 1500 mm width and coil weights up to 20 tons. Available with single or double loop pit configuration to optimize material flow, line speed and production efficiency. The system consists of fully integrated units including hydraulic decoiler, coil loading car, entry peeler, leveler, slitting head, scrap recoiler, tension system and hydraulic recoiler, ensuring continuous and stable production. Bljdpfjyy Ru Ejx Al Isg The line is available in different configurations depending on production requirements: This flexible structure allows the system to be optimized based on material type, thickness and production needs. KEY FEATURES Heavy-duty design for 20-ton coils High precision slitting (±0.1 mm) Advanced slitting head with precise adjustment system Hydraulic and automated operation systems High-speed production (up to 100 m/min) Robust mechanical structure for long-term operation ADVANTAGES Short lead time compared to European manufacturers High efficiency and continuous production Reduced downtime Customizable configurations Reliable and user-friendly automation system APPLICATIONS Steel service centers Automotive industry Construction sector Metal processing facilities OPTIONAL EQUIPMENT Rotary turnstile system Coil handling and transfer systems Advanced automation solutions Custom-designed configurations *Images shown in this listing include reference installations of similar coil slitting lines (3 mm and 4 mm thickness ranges) successfully manufactured, delivered and commissioned in different countries. These projects demonstrate our proven experience in delivering reliable and high-performance slitting lines worldwide.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 270 h, workpiece length (max.): 3,715 mm, workpiece width (max.): 1,320 mm, workpiece height (max.): 180 mm, overall weight: 6,060 kg, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, The machine has 270 operating hours, almost like new; features laser positioning. Technical data: Brand: Busellato JET Master T 4 Technical specifications: - Machining area: 3715x1320 mm (X,Y) - Workpiece height: 180 mm - Motor power: 9.5 kW - Max spindle speed: 24,000 rpm - C axis: available - Drilling unit: 19 spindles - 1 sawing unit - 16-position plate tool magazine - 3-part safety mat - Automatic central lubrication Vacuum pump capacity (m3/h): 244/286 Payment in euros or forints, price is net. Machine new price: €125,675. Sale price: €47,500 +36-30-9198-716 Blsdpfexawlbjx Al Ieg

Condition: new, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 680 l, color: white, gearing type: mechanical, number of gears: 16, Year of construction: 2025, Equipment: air conditioning, cruise control, fog lights, trailer coupling, = Additional options and accessories = - Immobiliser - Spare wheel - Sun visor = Remarks = Model description: IVECO T-WAY Tractor 6×4 AT720T47TH GVW 26-38 Ton HP 470 R20Tyre MY25 Tractor Head Code Diesel Type: AT720T47TH GVW: 26-38 TON Fifth Wheel: Jost fifth wheel Rear Axle: HR-TP Tyres: 20497 - Tyres 12.00R20 Drive Hand: LH Drive engine power: C13-470 CV Headlamps Protection Roof Rotating LED lights 7+7 Pin Trailer plug Fuel Tank 680 LT Pneum. Horn-Chassis PTO pre - equipment Curtains on door windows 2 lowered bunks w/o prot net Heated Electric rear mirrors rear dampers Front multileaf susp Loads 7500-13000kgs Drive T. 12.00R20 EBS+BAS Safety Hor. Filter cartridge Horizontal air filter 630cc air compressor Standard airtank plating Bedpfow Dukxjx Al Islg Steel air tank 90A alternator Standard Gear mode 08329 APU free discharge Horizontal batt side fram Manuals EMEA APAC STD Cab insulation Standard grey plastic part Mechanical cab suspension Manual Cab Tilt At lowroof cab Roof in Standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on cc Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 Mounting Plate H=16MM Rear anti roll bar Filter HP TR/No heat ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhand 785mm Bulb rear lights Electronic Battery cut off Emission Euro III Fabric Sta. 2 way Adj Pass Engine Plate Radiator Guard Provision Radio and CB Rear suspension no spacer Rear Axle ratio 4.23 Rear cross member Rear Multileaf Susp Rever Monotone buzzer Steel wheels Grey IC444 chassis Standard Cab Trim MPH/KPH speedometer Speed limiter 90KM/H Soft touch foam steering wheel With stickers 79240 Aux. Chassis for 5th wheel Pre heater Trattam Prot STD Towing version Trye inflation hose Vin Code check digit Warning Triangle Radice VIN WJM STD Setting C11/C13 Tryes 12.00R20 5th wheel 3 1/2" + moun. Plate Steel front bumper Front Anti Roll Bar

Condition: used, Model: D Serial No: 20829 Capacities: Maximum Swing Over Bed: 508mm Maximum Distance Between Centres: 4572mm Wheel Dimensions: 660x 75mm Work Head Speeds: (8) 22 – 129rpm Wheel Head Speeds: 735rpm Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 960rpm Work Head: 4HP 1440rpm Table Motor: 3HP 950rpm Complete With: 4 No 2 Point Open Steadies Complete 3 No 2 Point Steadies Incomplete Blodpfx Alsyx Hw Tj Iog Table Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 13,000 x 2500 x 1800mm Approximate Weight: 19,000kg

Condition: good (used), Motor protection switch, star-delta switch, reversing switch -Type: MDPPehb -Setting range in amperes: 4.9/5.5 -Number: 16x switches available -Price: per piece -Weight: 2 kg Bedpfeb A Sc Ejx Al Ijlg

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, Bedpfx Aeu R S Nwjl Iolg GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. Bljdpjy Hiq Sefx Al Iog - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Bjdexy Tlwopfx Al Iolg

Condition: used, Year of construction: 2016, Used Machine Year of manufacture: 2016 Equipment and technical data: - Electrical system 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle, 12 kW (S6), HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with stepless, height-adjustable extraction hood – motor-driven control - Full rated power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotation direction: clockwise/counterclockwise - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Max. saw blade Ø 350 mm - Spindle cooling: liquid cooling - Extraction hood, stepless adjustment Profit H350 16.30: CNC machining center in gantry design (without tooling) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electrowelded box sections. The internal steel ribbing provides high rigidity. Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (details available in the layout). Bljdpfxey Ih Rgo Al Ieg - Double-sided driven gantry X-Axis guidance system: The drive for the X-axis gantry is via a rack and pinion with angled, crowned teeth – guaranteeing maximum precision. The reduction gearbox ensures top machining quality and repeatability. Bearing via encapsulated recirculating ball carriages running on hardened and ground linear guides. Y-Axis guidance system: Bearing via encapsulated recirculating ball carriages running on hardened and ground linear guides. The Y-axis is positioned via a ground recirculating ball screw. Z-Axis guidance system: Bearing via encapsulated recirculating ball carriages running on hardened and ground linear guides. The Z-axis is positioned via a ground recirculating ball screw. Automatic central lubrication: Grease is automatically delivered to the guide carriages of X, Y, and Z axes as well as the ball screws of Y and Z axes. The lubrication cycle is executed automatically after a preset interval. 12-position linear tool changer on the left side of the machine frame including a pickup station for aggregates: The 12-position linear tool changer ensures minimal setup times and offers ample space for milling tools. One aggregate change station (see layout for configuration options). Max. tool diameter 250 mm. Max. tool length 240 mm. Drilling head DH 18 6H 1S: Vertically: 12 spindles (7 spindles in X-direction and 5 spindles in Y-direction). Horizontally: 6 spindles (4 spindles in X-direction and 2 spindles in Y-direction). Stroke = 70 mm, max. drill length = 70 mm, shank diameter = 10 mm. All spindles are individually driven and selected. 1 grooving saw in X-direction, max. saw blade diameter 120 mm.

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: Blsdpfx Aeyga T Njl Iog • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Bjdpfjxmlinox Al Ielg

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS Bsdpfx Asx Hllxsl Ielg - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900 mm Infeed height: 300 mm Shaft width: 1030 mm Shaft diameter: 700 mm Knife length: 1030 mm Number of knives: 3 pcs Screen dimensions: 70x70 mm Below: 2 toothed feed shafts Lower shaft motor: 7.5 kW Bjdpfx Alsx S Nawo Ijlg Above: 2 toothed feed shafts Upper shaft motor: 7.5 kW Belt conveyor feeder Redler chain conveyor 5600 mm + 10600 mm, 2.2 kW Feeder belt width: 800 mm Main motor: 90 kW Reverse function Overall machine dimensions (L/W/H): 3300x3100x1700 mm Base for chipper dimensions: 3300x2080x1940 mm Feeder / Redler dimensions (L/W/H): 5600x900x1000 mm + 10600x1050x1600 mm Base for feeder belt dimensions: 5100x1300x2520 mm Total weight approx.: 16,000 kg ADVANTAGES – German-made – Redler-type chain conveyor equipped with scrapers – Reverse function – DTR technical documentation – Used chipper, in very good condition Net price: 258,900 PLN Net price: 61,640 EUR (according to exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg Bledol Dw Nxepfx Al Isg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.