Used Tauring Profile Bending Machines for sale (68,124)

Condition: used, Year of construction: 1976, Profile bending machine IRLE - B 160 HH Nwedpfeytn E Tox Anfjf Technical data on photo

Condition: used, Roller sets for section bending machine, 3-roll ring bending machine HERKULES WETZLAR The rollers fit a section bending machine HERKULES WETZLAR type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 rollers set No. 1, roller diameter = 110 mm, roller width = 180 mm 2 rollers set No. 2, roller diameter = 160 mm, roller width = 40 mm Nodpeglaq Iefx Anfewf 3 rollers set No. 3, roller diameter = 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm without keyway The machine had 2 driven rollers Total weight of all rollers: 57 kg Good condition

Condition: good (used), Technical data: 2 rollers hydraulically adjustable Nwodpjt Ukqaefx Anfof 3 rollers driven Bending moment: 110 cm/3 Shaft diameter: 180 mm Roller diameter: 460 mm Main motor power: 15 kW Digital display Dimensions (length x width x height): approx. 2000 x 1700 x 1600 mm Weight: approx. 6.5 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: used, Profile ring bending machine with manual crank drive, year of construction approx. 1950 Lower rollers Ø 56 mm with grippy knurling Lower roller width: 115 mm Upper roller Ø 100 mm Upper roller width: 110 mm - Symmetrical roller arrangement with 2 driven lower rollers - Upper roller adjustment 55 mm via threaded spindle - Manual crank drive with 6:1 gear ratio Required space (L x W x H): 440 x 660 x 1000 mm Nwedpfx Anjxbtx Hefjf Weight: approx. 200 kg

Condition: used, 3-Roller Ring Bending Machine CONZ Type UM 7-4 Motor no.: 1331455 Year built: ca. 1970 Roll diameter, drive roller: 60 mm Roll diameter, adjustment roller: 68 mm Roll width, drive roller: 145 mm Roll width, adjustment roller: 105 mm Roll speed: 26 rpm Nsdpfx Anjxbtxysfewf Motor power: 0.75 kW Power supply: 380 Volt, 50 Hz - Forward and reverse rotation - Top roller without swing bearing - Parallel adjustment of the lower rollers via threaded spindle - Vertical adjustment of the top roller via threaded spindle from below Required space (L x W x H): 950 x 520 x 1200 mm Weight: 200 kg

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, foot remote control, CRONOSSTECH PKH 160 Profile Bending Machine The CRONOSSTECH PKH 160 model offers maximum efficiency in heavy-duty profile bending applications thanks to its robust construction and powerful hydraulic system. All three rolls are driven, enabling stable and precise bending without slippage. Key Advantages Nwjdoy Hgwiepfx Anfof - Three rolls driven by hydraulic motors - High-strength, durable construction - Horizontal and vertical operating capability - Digital displays for precise bending - Heavy-duty industrial application Areas of Use - Steel construction fabrication - Tube and profile bending applications - Machinery and equipment manufacturing - Shipyard and marine industry - Automotive and auxiliary industries Standard Features - Welded steel frame construction - Three rolls driven by hydraulic motors and planetary gearboxes (individual planetary gear for each roll) - Hardened and ground shafts made from special high-strength materials - Hardened standard rolls - Mobile and independent control panel - Horizontal and vertical working positions - Dual-speed operating system - Digital displays (2 units) - Three-way hydraulic side supports Optional Features - Special rolls, bending and reducing tools - NC control system Technical Specifications – PKH 160 - Roll diameter: Ø160 mm - Roll bearing diameter: Ø500 mm - Working speed: 3 – 6 m/min - Motor power: 22 kW - Machine length: 2500 mm - Machine width: 2350 mm - Machine height: 2600 mm - Weight: 10,700 kg Production Note: This machine is manufactured by CRONOSSTECH in Turkey. It is designed in line with high-quality standards and is suitable for industrial use.

Condition: good (used), Year of construction: 1994, CNC Spiral bending machine, capacity 50cm3, min-max diam of coil 500-3.500mm. Nwedoiu Acpepfx Anfef

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display Nwsdpfxopxmauj Anfjf - Brake motor for the production of precision sheets - Roll sets

Condition: new, Year of construction: 2023, shaft diameter: 80 mm, Profile bending machine AHB 80 - electro-hydraulic ring/profile bending machine - hydraulic bottom roller adjustment - Hydraulic side roller adjustment - Lower shafts individually adjustable - Three driven rollers - divided roller segments - digital display - touch screen - Hardened shafts and standard rollers - Hydraulically adjustable side straighteners - Can be used horizontally and vertically Nwodpfx Ansqxcy Hsfof - Mobile control panel - CE mark / declaration of conformity Shaft diameter 80 mm hardened Fully hydraulic Motor 400 Volt 50 Hz 3 ph. Weight approx. 1,700 kg Dimensions 1340 x 1390 x 1640 mm

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF Nwodpfjgh T Iaox Anfsf - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw - adjusting way: 35 mm - weight: 110 kg - dimensions: 530x420x500 mm

Condition: new, Year of construction: 2024, shaft diameter: 80 mm, Profile bending machine AHB 100 - with universal rollers - Three roller drive - Digital display left and right bending axis - Hydraulic lateral rectifier - Hydraulic drive of the bending rollers - Vertical and horizontal operation - built according to CE standards Nwodpfx Aovaw Elsnfef - Bending capacity flat bars max. 12 x 20 mm - Flat bent 200 x 40 mm - U profile inside and outside 180 mm - Angle profile web outside 100x100 mm - Angle profile web inside 90x90 mm - Solid material round 75 mm - INP 140 - Shaft diameter 100 mm - Roller diameter 315 mm - Bending speed 5 m/min. - Motor power 11 KW - Weight 2600 kg - module max Wcm3 -400 Volt 50 Hz. 3 ph. -1950x1600x2100 mm

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg Nwedpfx Anjgh T Hrofof - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2024, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 Nwedpfxofkz Rbj Anfef NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei Nwoded S Uf Sepfx Anfsf model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: new, Year of construction: 2024, Ring Rolling Machine Zopf - Model ZB 60/3 MD - year of construction 2024 - motorized - with digital readout - three working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg Nwodpfx Ansgh T Hkefof - motor 0,75 kw 400 Volt 50 Hz 3 phase - including basement horizontal and vertical

Condition: new, Year of construction: 2024, Ring Rolling Machine Zopf - Model ZB 60 M standard basement - year of construction 2023 - motorized - two working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm Nwedjgh T H Djpfx Anfef - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco NC - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - NC control with touch screen - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min Nwedeg Ntmhepfx Anfef - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph. Njdpfx Anjd A Nb Hjfswf

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Nodpfexc N Rhjx Anfowf Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 118 mm, overall weight: 220 kg, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, NEW!!! LFSS PK 30 Profile bending machine, pipe bender 30mm /ct2275/ Manufacturer: LFSS Type: PK30 Year of manufacture: 2025 Horizontal and vertical operation Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Nwodpoxh D Nvofx Anfef Power: 400 V / 0.75 kW 50Hz Electric foot switch with emergency stop Standard bending set Weight: approx. 200 kg CE certification Instructions in German or English Dimensions: W 700 x H 1450 x D:750 mm

Condition: good (used), Year of construction: 1964, Profile bending machine. Produced by Girggio - ITALY - 1964. Type. PA-14. 8kW main engine. Nedpfxslbilrj Anfowf Roller screw drive motor 5.5 kW. Dimensions L x W x H 2200 x 1300 x 1400 Weight approx. 3000kg.

Condition: good (used), functionality: fully functional, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 130 mm, roller diameter: 380 mm, rotational speed (min.): 5 rpm, overall weight: 4,500 kg, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL 130- MODEL PARMIGIANI ITALY Nwsdsxackcjpfx Anfef ELECTRO MECHANICAL MACHINE SHAFTS OUTPUT DIA..130 MM 3 ROLLERS PYRAMID UPPER ROLL DRIVEN ROTATION WITH GEARUNIT ONELECTRIC MOTOR Kw 11 SIDE ROLLERS BENDING POWERED ON ELECTRIC MOTOR Kw 3 UPPER ROLL DIA 380 mm SIDE ROLLERS DIA 350 mm CONTROL PANEL UPGRADED LATEST TECHNOLOGY ELECTRIC INVERTERS FULL POWER CONTROL WITH INFINITE VARIABLE SPEED COMMANDS ELECTRIC ON PORTABLE PUSH BUTTONS DIGITAL POSITION READOUT OF THE BENDING ROLLERS WEIGHT OF THE MACHINE 4,5 TON SAFETY AND EMERGENCY SYSTEM INSTALLED MACHINE WORK WITH VERTICAL SHAFTS

Condition: good (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: CA90H2 PIPE BENDING ROLL, shaft diameter: 90 mm, roller diameter: 260 mm, rotational speed (min.): 8 rpm, rotational speed (max.): 8 rpm, overall weight: 1,000 kg, total length: 1,260 mm, total width: 1,000 mm, total height: 1,260 mm, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, operating speed: 8 mm/s, roll diameter: 260 mm, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL SHAFTS OUTPUT 90 MM - PIPE BENDING ROLL MARGI CA90H2 YEAR 2007 SHATS OUTPUT SIZE 90 MM SET OF UNIVERSAL ROLLERS SIZE 260 MM LATERAL CORRECTOR ROLLERS LEFT/RIGHT SIDE SCREW ADJUST Njdpfswkrr Tox Anfjwf 4 SET OF ROLLERS FOR TUBE BENDING MM 61 - 78 – 90 – 116- CONSOLE ELECTRIC MOVABLE ON WHEELS ALL THE CONTROLS CENTRALIZED DIGITAL POSITION READOUT OF BENDING ROLLS UPPER ROLL DRIVEN MOTORIZED ELECTRIC POWERED WITH GEAR UNIT SIDE ROLLERS HYDRAULIC ADJUSTMENT POWERED INDEPENDENT WITH PISTON MACHINE REVERSIBLE CAN WORK WITH SHAFTS VERTICAL/HORIZONTAL. SAFETY AND EMERGENCY STOP EQUIPMENT INSTALLED WITH THE MACHINE MANUALS AND SCHEMATICS IN ORIGINAL ALONG WITH THE MACHINE WEIGHT 1000 KG DIMENSION 1260 X 1000 X H 1260 MM

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max pipe bending range up to 30 mm. The bending machine allows working both vertically and horizontally. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal Driver's manual in Polish CE declaration Technical data Round tube [mm] 30 x 1 Rectangular profile [mm] 30 x 30 x 1 Round bar [mm] 16 Solid rectangular piece [mm] 30 x 10 Shaft diameter [mm] 30 Rotation [rpm] 9 Motor power [kW] 0.75 kW Nwedpfx Aju Snlksnfef Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 1200 x 750 x 1210 Weight [kg] 252

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Machine in excellent condition!! Standard specification: Njdpfx Anjr Ddurjfewf welded steel construction 3 drive rollers horizontal and vertical working position shafts made of improved special steels digital reading portable control panel work instructions Optional equipment: Technical data: shaft diameter: Ø100 mm roller diameter: Ø315 mm working speed: 7 m/min engine power: 7.5 kW machine length: 2000 mm machine width: 1450 mm machine height: 1700 mm machine weight: 3650 kg