Profile bending machine

Faccin RCMI 360

Condition: ready for operation (used), Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible. Podpfoxr Nvcsx Am Tjpw

Condition: like new (used), Rotary autoclave SURDRY 1 B Ppjdpfx Amoxp Rqve Tjw

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: Ppedsvr Hgvopfx Am Tew -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Ppjdpolhwr Refx Am Tsw Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Motorized tank/boiler turning device with rail-mounted chassis Technical data: - Total load capacity, driven + follower unit: 40,000 kg Podpshcnhmsfx Am Tepw - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Condition: used, power: 138 kW (187.63 HP), fuel type: diesel, Year of construction: 2022, operating hours: 2,278 h, Empty weight: 26.900 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Pjdpfx Amsyix S Aj Tspw

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Ppedpfxjw Rm Sae Am Tew Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: used, functionality: fully functional, power: 231 kW (314.07 HP), Year of construction: 2004, machine/vehicle number: KMTODO61E02076058, fully functional Ppodpfx Amoylyp Ue Tsw

Condition: used, Year of construction: 2010, operating hours: 11,780 h, Equipment: ABS, all wheel drive, Volvo EXCAVATOR EW140C air conditioning 16,850 kg Ppsdpoyltr Aofx Am Tsw 91 kW Top condition

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Pjdpfx Ameulc Ixe Tjpw Plasma cutter Hypertherm Powermax 800 Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.