Used Deep Cultivator for sale (1,224)

Condition: used, Year of construction: 2024, Air brake Slope disk Following harrow Lighting with track eradicator / telescopic drawbar CAT III / IV Hydraulic track eradicator HM hydraulic / front level board Coulter set Carbide goose foot coulter Hydr. system FW with roller / DSTS roller / Lhodjtpgtljpfx Aa Isg

Condition: used, Year of construction: 2024, Equipment: compressed air brake, Köckerling Allrounder flatline telescopic drawbar KAT III track eradicator / hydraulic coulter set HM goose foot coulter Hydr. system FW with roller DSTS roller / compressed air brake Following harrow DSTS roller Lighting with track eradicator / Ledpfx Aastp Hl Rj Iehg

Condition: used, Year of construction: 2017, 4-balking / Ledpfxotquhie Aa Ishg

Condition: used, Year of construction: 2024, Telescopic drawbar Cat III/IV Coulter set Wide coulter Levelboard with spreading tine / air brake Following harrow DSTS roller Lighting / Lhjdott Rm Hspfx Aa Isg

Condition: used, Year of construction: 2024, Track eradicator HD narrow coulter Rear lighting for road travel / Reinforcing plates KG 6002-2 Tine set "Handle Super" PTO shaft Bondioli & / Pavesi Manual working depth adjustment Toothed packer roller PW 3000-600 / Support arms for KG 02-2 pick-up Lhsdjrxurmjpfx Aa Ieg

Condition: used, Year of construction: 2024, Tined harrow DSTS roller Lighting Traction booster d=40mm mechanical / stone safety device Telescopic drawbar Cat III Drawbar bracket f. traction booster / coulter set tip+guide 25mm Roller level board DSTS 40km DSTS roller Running gear / 40km/h Compressed air brake Lsdpfx Aajrxutce Iohg

Condition: used, Year of construction: 2024, Equipment: compressed air brake, Telescopic drawbar KAT III track eradicator hydraulic coulter set HM goose foot coulter / hydr. system FW with roller DSTS roller air brake following harrow DSTS roller / lighting with track eradicator / Ledpfx Aaorxutge Ijhg

Condition: used, Year of construction: 2024, Hydraulic depth adjustment Front support wheels . 2.0 Herkulesz. Plus + / double spring coulter set HM goose foot single leveler STS roller Ø 530mm / double following harrow STS lighting / Lhjdporxutnjfx Aa Ijg

Condition: used, Year of construction: 2023, Chassis 40km/h Tined Weeder DSTS-Roller Lighting Expert opinion for operator / 40km/ AB:2158642 15.06.2023 hydraulic stone protection telescopic drawbar Cat / III/IV coulter set HMSpitze+Leitbl 25 coulter set Flügelsch flat 30m / roller level board DSTS Lhedpst Dnuhsfx Aa Isg

Condition: used,

Condition: used, Year of construction: 2024, Telescopic drawbar Cat III/IV Coulter set HM point + guide plates Levelboard with / drag tines Air brake Following harrow DSTS roller Lighting / Lhjdpfx Aot Hrzdsa Iog

Condition: used, Year of construction: 2024, Coulter set Reversible coulter Single levelling board STS roller Following harrow STS roller / lighting / Lodpfx Astpa Euea Iehg

Condition: used, Year of construction: 2024, Manual depth adjustment Telescopic drawbar Cat III/IV Coulter set HM point + / guide plate Air brake 40km/h Tined harrow DSTS roller Lighting / Ljdpfx Aastpgtpj Iohg

Condition: used, Year of construction: 2023, Equipment: compressed air brake, Double harrow Lighting with track eradicator Telescopic drawbar CAT III / hydraulic track eradicator Cutter roller Coulter set HM goose foot coulter DSTS roller / hydr. system FW with roller Air brake / Lhodpfx Ajthhczea Ieg

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, table length: 1,050 mm, table width: 1,050 mm, center height: 1,040 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Drilling depth: 1,200 mm Lhodpfx Aexm S Idea Ijg Spindle speed (min): 50 rpm Spindle speed (max): 3,000 rpm Feed rate (Row 1): 18 – 160 mm/min Feed rate (Row 2): 35 – 320 mm/min Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm MACHINE DETAILS Dimensions (L x W x H): 6,500 x 3,500 x 2,900 mm Electrical data Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW EQUIPMENT 3-axis Heidenhain digital readout Coolant system

Year of construction: 2007, condition: excellent (used), functionality: fully functional, IMSA DEEP HOLE DRILLING MACHINE MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS: 1250 mm CROSS AXIS (MILLING QUILL): 380 mm CROSS TRAVEL OF HEAD: 500 mm VERTICAL TRAVEL: 1000 mm ROTARY TABLE SIZE: 1000x800 mm TOTAL MACHINE WEIGHT: 20,000 kg Lodpfxoyft Haj Aa Ishg

Condition: good (used), We offer contract deep-hole drilling work. From a diameter of 0.5 to 400 mm and up to a drilling depth of 12,000 mm, everything is possible! Lhodsrt T U Eepfx Aa Isg Please contact us and we will be happy to prepare a quotation for you. Please let us know the quantity, the material, the drilling diameter and the drilling depth.

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Lhodpfxsx E Ingo Aa Iog Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: refurbished (used), Year of construction: 2017, operating hours: 428 h, functionality: fully functional, machine/vehicle number: 428, drilling depth: 400 mm, spindle speed (max.): 23,700 rpm, drill diameter: 6 mm, number of spindles: 1, workpiece length (max.): 450 mm, No reserve price - guaranteed sale to the highest bidder! Machine has only 428 operating hours! TECHNICAL DETAILS Control: SFT TBS 200 Drilling method: Single-lip drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with plunge spindle: 120 mm Drilling depth with sealed housing only: 400 mm Sealed housing with one-piece steady rest: 350 mm Max. workpiece length: 450 mm Max. rapid traverse: 4,000 mm/min Spindle drive Power at 2,810 rpm: 2 kW Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Pre-slide drive Type: Ball screw spindle 25 × 5 mm with servo motor Drill bushing holder and chip ejector Drill bushing holder: permanently mounted on the machine bed Components: BOTEK drill bushing holder and sealing housing Ledpfewu Eb Ajx Aa Iohg Chip ejection: downwards into the chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Coolant system Tank volume: approx. 500 l Filtration: integrated paper belt filter Coolant pump: single-piece with frequency converter Flow rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulically adjustable tailstock - Manual tailstock adjustment for different tool positions Workpiece lengths - Drill bushing holders and sealing housings from BOTEK - Chip ejection directly into a collection container - Integrated coolant system with paper belt filter - Includes deep-hole drill bit and technical documentation Transportation possible by standard truck

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 600 mm, table width: 1,000 mm, table length: 1,200 mm, retraction force: 40 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Flanging) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and flanging operations. The 8-side guided H-frame structure guarantees maximum rigidity throughout the pressing cycle, maintaining stable parallelism and perpendicularity tolerances over the entire stroke. The CHSP 100/40 model features a 100-ton main ram and a 40-ton cushion ram (blankholder), specifically designed for precision deep drawing and flanging operations. The frame construction is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 sliding guides - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection Ljdpfsx N T Uyjx Aa Ijhg - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 - Type: Steel construction, H-frame body with 8 sliding guides - Frame Material: St52 – ERDEMİR grade - Slide Bearing: Bronze Zr14 - Capacity (Ram): 100 Tons - Capacity (Cushion/Blankholder): 40 Tons - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 600 mm - Stroke (Cushion): 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration stress-relieving - Welding: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (certified welding coordination engineers supervise per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 11 kW – IE3 - Main Pump: 22 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Flanging Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø230 mm – Ck45 - Cushion Cylinder Bore: Ø140 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 3400 mm - Approximate Width: 2950 mm - Approximate Depth: 2000 mm - Distance from Floor to Lower Table: 1250 mm - Pre-fill Valve: NG 100 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 400 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 150 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-Type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. The H-frame structure with 8 guideways provides maximum rigidity during the pressing cycle, and maintains parallelism and perpendicularity tolerances consistently over long strokes. The CHSP 400/150 model, with a 400-ton main ram and 150-ton blank holder ram (pot), is designed for deep drawing and forming applications that require high tonnage. The frame is stress-relieved by vibration to ensure long-term durability and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guideways - Stress-relieved frame via vibration - Bronze Zr14 guide slippers - WPQR and WPS approved welding by TÜRK-AK accredited certification (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing conform to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and blank holder (pot) stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filtration contamination warning - Monitoring of hydraulic unit oil temperature and system status on display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 400/150 Type: Steel construction, H-frame body with 8 guideways Frame Material: St52 – ERDEMIR Guideway Liners: Bronze Zr14 Capacity (Ram): 400 Tons Capacity (Pot): 150 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1000 mm Stroke (Pot): 350 mm Min. Open Height: 100 mm Max. Open Height: 1100 mm Stress Relieving: Vibration method Welding Application: WPQR & WPS approved by TÜRK-AK accreditation Lhodex N Uhhepfx Aa Ieg EN ISO 15614-1:2017 (Welding applications are supervised by certified "welding coordination engineers" per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Rapid Descent Speed (Movable Table): 150 mm/s Forming Speed (Movable Table): 12 mm/s Return Speed (Movable Table): 170 mm/s Forward Speed (Pot Table): 30 mm/s Main Cylinder Internal Diameter: Ø450 mm – Ck45 Pot Cylinder Internal Diameter: Ø280 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5600 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touch Screen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 24 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,500 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,400 mm, retraction force: 500 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered for maximum frame rigidity, precise parallelism, and long-lasting operation in high-tonnage deep drawing applications requiring large bolster dimensions. Thanks to the 8-guide H-frame body, the ram and table movements remain controlled and stable throughout the pressing process. The CHSP 1500/500 model, with 1500-ton main ram and 500-ton blank holder capacity, is developed for large-dimension dies, deep drawing, and precise forming operations. The vibration stress-relieved welded steel frame delivers high durability and reliability under heavy-duty industrial conditions. ⚙️ Standard Equipment • Welded steel construction, 8-guide H-frame design • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronic contamination warning for the filter • Monitoring of hydraulic oil temperature and system status via display • Off-line filtering and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-guide H-frame design Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 1500 / 500 tons Moving / Fixed Table: 1500 × 2400 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Blank Holder Cylinder: Ø360 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Ledsx N Ukiopfx Aa Iehg

Condition: new, Year of construction: 2025, pressing force: 60 t, stroke length: 400 mm, table width: 700 mm, table length: 700 mm, clearance between the columns: 700 mm, retraction force: 20 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 60/20 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 60/20 ton four-column hydraulic deep drawing press is a rigid and compact solution designed for precise metal forming, deep drawing, and metal spinning applications. Thanks to its four-column construction, the press maintains stable parallelism and perpendicularity tolerances throughout the pressing process. The frame is constructed from St52 grade steel and subjected to stress relieving via vibration. Ram and blank holder systems can be controlled independently; stroke and pressure settings are finely adjusted via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motors, and an automatic lubrication system, it delivers long-lasting, safe, and efficient operation. The PLC-controlled system minimizes operator errors. This model is an ideal solution for small to medium scale metal spinning, deep drawing, die testing, and auxiliary pressing tasks. Key Advantages - Rigid four-column press body - Independent stroke and tonnage control for ram and blank holder - System parameters can be set via touchscreen panel - High precision and repeatability - Low maintenance requirements and long service life Applications - Metal spinning operations - Deep drawing processes Lsdpfxsx N Ulge Aa Ishg - Die testing and prototype production - Metalworking and auxiliary production lines ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. induction-hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 60 Ton CAPACITY (BLANK HOLDER): 20 Ton DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 400 mm STROKE (BLANK HOLDER): 100 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 500 mm WELDING STRESS RELIEF: Vibratory stress relieving WELDING APPLICATION: WPQR and WPS certified by TÜRK-AK per EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DOWN SPEED: 150 mm/s MOVING TABLE DRAWING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s BLANK HOLDER TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 175 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 100 mm – Ck45 AUXILIARY FAST ADVANCE CYLINDERS: 2 units APPROX. PRESS HEIGHT: 3100 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm MAIN FILLING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION METHOD: Automatic (adjustable from panel) RAM / BLANK HOLDER STROKE & TONNAGE CONTROL: Adjustable from panel SYSTEM & PRESS STATUS MONITORING: On-screen display DIE MEMORY: Adjustable via panel LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 80 t, stroke length: 500 mm, table width: 700 mm, table length: 700 mm, clearance between the columns: 700 mm, retraction force: 30 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 80/30 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 80/30 ton four-column hydraulic deep drawing press is an industrial press solution designed for high-precision metal forming, deep drawing, and die testing applications. It features a rigid four-column body structure for superior accuracy and repeatability. The St52-grade steel frame is subjected to stress relief via vibration, ensuring excellent parallelism and perpendicularity tolerances are maintained during pressing operations. The ram and die cushion systems operate independently; stroke and pressure adjustments can be precisely controlled via the operator panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-based control, this press ensures long-lasting, safe, and energy-efficient performance. Maintenance requirements are minimized thanks to the automatic lubrication system and filter contamination alerts. This model is ideal for small- and medium-scale serial production, die trials, and precision forming processes. Key Advantages - Rigid four-column press body design - Independent stroke and tonnage settings for ram and die cushion - Full control via touchscreen panel - High repeatability and precision - Low maintenance cost, long service life Areas of Application - Metal forming operations - Deep drawing processes - Die trial and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS Lhedpfx Aajx N Ults Iog TYPE: Four-column BODY MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 Tons CAPACITY (DIE CUSHION): 30 Tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 500 mm STROKE (DIE CUSHION): 150 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 600 mm WELDING STRESS RELIEF: By vibration WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED: 150 mm/sec MOVABLE TABLE DRAWING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec DIE CUSHION FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 200 mm – Ck45 DIE CUSHION CYLINDER BORE: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3300 mm APPROXIMATE PRESS WIDTH: 1050 mm APPROXIMATE PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION SYSTEM: Automatic (Adjustable from HMI) RAM / DIE CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable from HMI SYSTEM & PRESS STATUS DISPLAY: Viewable on HMI DIE MEMORY: Adjustable from HMI LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 Tons

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 800 mm, table width: 1,000 mm, table length: 1,000 mm, clearance between the columns: 1,000 mm, retraction force: 80 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 250 / 80 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 250 / 80 ton four-column hydraulic drawing press is a high-rigidity hydraulic solution designed for precision metal forming, deep drawing, and press applications. The frame is constructed of St52 grade steel and undergoes stress relief through vibration, ensuring high parallelism and perpendicularity tolerances during long-term operation. The ram and cushion systems operate independently; stroke and pressure settings can be precisely adjusted via the touch panel. With hydraulic components from REXROTH or PARKER, an IE3 efficiency-class motor, and PLC-controlled system, it offers high performance and reliable operation. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With its 250 / 80 ton forming capacity, this model is an ideal industrial press solution for medium- and heavy-duty metal forming, deep drawing, and die applications. Key Advantages Lhsdpfx Aox N Um Roa Ijg - Four-column, high-rigidity press frame - Independent stroke and tonnage settings for the ram and cushion - Full control via touch panel - High precision and repeatability - Long service life with low maintenance costs Areas of Use - Metal forming applications - Deep drawing operations - Die testing and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. induction hardened chrome-plated shafts SLIDE GUIDING: Bronze Zr14 CAPACITY (RAM): 250 Ton CAPACITY (CUSHION): 80 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. OPENING HEIGHT: 100 mm MAX. OPENING HEIGHT: 900 mm STRESS RELIEVING: Vibration stress relief WELDING APPLICATION: WPQR & WPS accredited by TÜRK-AK – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 class MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT: 150 mm/sec FORMING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec CUSHION TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 360 mm – Ck45 CUSHION CYLINDER BORE: Ø 200 mm – Ck45 AUXILIARY BOOST CYLINDERS: 2 units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 16 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.