Used Epicyclic Reducer for sale (3,180)

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm Isdpfx Absxddvnepeif turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: used, Year of construction: 2007, - Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm - CE safety devices - 8 ATS plate holders - L = 1525 mm - 24 sliding rails - Automatic positioning of 8 plate holders and sliding rails (EPS X-Y) - Conveyor belt for removing chips and scrap - Pneumatic locking system, divided into 2 working areas in X - 8 rear reference stops with a stroke of 115 mm - 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm) - 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm) - 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - Sensor for detecting lowered stops. - Pneumatic system for lifting rod holders. - 6 lifting rod holders for easy loading - H = 74 mm modules. - Vacuum system for a 250 m3/h pump - 250 m3/h rotary vane vacuum pump for standard vacuum system Composition C3-A1 - Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit. Iisdpfxjzux Nwe Abpsf - Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position. Composition C3-P2 - Additional Z-slide for rear work units, controlled by an independent Z-axis - 16 vertical and 4 horizontal drilling spindles in the Y direction - Chain-type tool changer with 22 positions at 180 mm center distance - Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer - RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle - Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head. - Automatic lubrication system - Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions. Note: - Additional overhauled 5-axis main spindle - 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Iodjx Iggyjpfx Abpoif Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Condition: used, Year of construction: 2011, turning length 1500 mm control SINUMERIK 828D centre height 270 mm greates pass round over bed 540 mm swing diameter over slide rest 310 mm bed width 350 mm Iiedpfx Abjxyaf Repjf max. workpiece weight 1500 kg spindle bore 85 mm turning speeds 27 - 2250 U/min main drive DC 11 kW MACHINE EQUIPMENT: - AME chip conveyor - Lynette - Heavy grey cast iron bed for optimum damping and reduced tool wear - Inductively hardened and parallel synchronised bed guides - Counter guides completely Turcite-coated and hand-scraped - Hardened and ground ball screws - Thermosymmetrical headstock - Main drive 11 kW - Infinitely variable speed range 27-2250 rpm with 3-stage gearbox

Condition: used, This listing is for 1 of 3 Parker SciLog SciPres Pressure Monitor. The unit is in full working condition and is ready for immediate release The Parker SciLog SciPres Pressure Monitor is a pre-calibrated, single-use pressure sensor specifically engineered for biopharmaceutical applications. It seamlessly integrates advanced pressure sensing with disposability, offering a hassle-free setup that enhances operational efficiency in critical environments. Key Features: Iedpfx Aboxxycyspeif - Pre-calibrated Sensors: Each sensor comes pre-calibrated for immediate use, simplifying setup and reducing error risks. - Unique ID for Traceability: Each unit is pre-programmed with a unique identification number, enabling thorough traceability and data documentation through the SciLog® SciDoc software. - Integrated Calibration Data: Calibration and identity information are stored on the sensor's chip for easy access and validation. - Simultaneous Inputs: The monitor can display inputs from up to three SciPres pressure sensors at once, providing comprehensive monitoring. - Pressure Calculations: It calculates and displays both trans-membrane pressure (TMP) and differential pressure (dP) for enhanced process visibility. - Stability: Gamma-stable, NaOH stable, and autoclave stable, ensuring compatibility with various sterilization processes and chemical environments. Applications: - Filtration Processes: Ideal for monitoring pressure changes in filtration systems for efficient operation. - Chromatography: Supports precise pressure control, crucial for effective separation processes. - Reverse Osmosis: Ensures accurate pressure measurements for optimally functioning systems. - Fermentation: Monitors pressure conditions critical for bioprocessing and yield optimization. Additional Specifications: - Digital Display: Easy-to-read digital interface for real-time monitoring of pressure data. - Plug-and-Play Convenience: Designed for out-of-the-box use, allowing quick integration into existing systems without extensive setup.

Year of construction: 2018, condition: used, This listing is for a Grant Controlled Rate Freezer - CRF-1 The unit is in full working condition and is ready for immediate release Product Overview: The CRF-1 Liquid Nitrogen-Free Controlled Rate Freezer is designed for precision-controlled freezing and cryopreservation of biological samples, such as embryos, stem cells, mammalian cells, spermatozoa, antibodies, tissue sections, and rodent organs. Unlike conventional liquid nitrogen-based freezers, the CRF-1 is liquid nitrogen and cryogen-free, eliminating contamination risks and making it suitable for use in cleanrooms and barrier facilities. It offers superior performance in terms of cell viability post-freezing and poses no fire hazard, unlike alcohol-based systems. The CRF-1 allows for highly accurate, reproducible, and controlled freezing rates, crucial for the cryopreservation of biological samples, ensuring optimal recovery upon thawing. Key Features: Cryogen-Free Design: The CRF-1 is free from liquid nitrogen and alcohol, offering a safer, cleaner alternative to traditional freezing methods. No contamination risk, making it ideal for use in sterile environments. Precise Cooling Control: The cooling rate is accurately controlled, especially for the critical nucleation/seeding phase, which ensures consistent and optimal recovery of cells. Wide Temperature Range: Capable of cooling down to -100°C with straws, offering a broad application range for biological cryopreservation. Simple Operation: The CRF-1 operates with or without a PC, and it can log data via PC software. Cooling profiles are displayed directly and can be customized. High Versatility: Compatible with cryovials, straws, bags, microplates, and Matrix-96-well block plates, allowing for research across multiple areas like stem cell research, transgenic embryos, mammalian cells, and more. Low Operational Costs: The CRF-1 runs at approximately 1% of the cost of liquid nitrogen-based freezing systems. Safety Features: Includes an optional Un-interruptible Power Supply (UPS) for complete cycle continuation in case of power failure. Compact & Quiet: Fits neatly on a bench-top and operates quietly, making it suitable for laboratory settings. Main Applications: Transgenic embryos research Stem cell research Clinical and research samples like lymphocytes and tissue cell lines Mammalian cell preservation (e.g., cardiomyocytes, adipose, liver, muscle) Cord blood-derived stem cells Adherent cells and stem cells in microplates Cell suspensions in numbered/barcoded arrays Robotic integration for high-throughput applications Veterinarian IVF applications Technical Specifications: Dimensions (w x d x h): 264 x 367 x 445 mm Weight: 9.8 kg Max Plate Temperature: 30°C Min Plate Temperature: -80°C (standard) or -100°C (dependent on model) Temperature Accuracy: ±0.5°C Temperature Stability: ±0.1°C Temperature Uniformity: ±1.0°C Iiedpfxsxv Dz Is Abpjf Max Cooling Rate: 10°C/min Max Temperature Stabilization Time: 5 minutes Key Benefits: Accurate and Reproducible Cooling Rates: Ensures controlled freezing rates and precise sample temperature management. Customizable Cooling Profiles: Choose from linear and non-linear profiles, or create your own tailored profile. No Cryogen or Liquid Nitrogen: Ideal for reducing contamination risk and the cost of liquid nitrogen. Low Running Costs: Estimated to cost only 1% of traditional liquid nitrogen-controlled freezing methods. End-of-Cycle Cooling Stability: Maintains a steady -100°...

Condition: used, This listing is for a Agilent Cary 100 UV-Vis spectrophotometer. The unit is in full working condition and is ready for immediate release. The Unit is supplied with a Agilent PCB 1500 Water Peltier System. The Agilent Cary 100 UV-Vis Spectrophotometer is a highly versatile and cost-effective instrument designed for a broad range of laboratory applications, making it an excellent choice for routine research in various fields such as chemistry, biochemistry, and materials science. Ijdpfxoxxz Sco Abpeif Key Features: Double Beam Design: This design enhances accuracy and precision by allowing simultaneous measurement of the sample and reference, mitigating the impact of fluctuations in the light source. Wavelength Range: The instrument operates over a wide wavelength range of 190 to 900 nm, making it suitable for diverse applications, including those that require measurements in the UV and visible spectrum. Variable Spectral Bandwidth: The spectral bandwidth can be adjusted as low as 0.2 nm with variable slits, enabling users to optimize data resolution for specific experiments and applications. High Scanning Speed: With a scanning speed of up to 3000 nm/min, the Cary 100 provides quick data acquisition, enhancing efficiency during experimentation. Superior Photometric Stability: The optical design ensures robust photometric stability, resulting in consistent measurements over time, which is crucial for reproducibility in scientific research. Signal-to-Noise Optimizations: The special signal-to-noise reading mode allows for customizable control over measurement precision, enabling reduced scanning times in high-energy regions and improved averaging in lower throughput conditions. Flexible Operating Modes: Users have the flexibility to operate the spectrophotometer in single, double, or dual single beam modes, adapting the functionality to different experimental needs. Modular Software Control: The Cary WinUV software, which is Windows-based and modular in design, allows users to customize their experience with capabilities like advanced data processing, automatic peak labelling, and enhanced reporting and file transfer options. Accessories and Sample Holders: The instrument can be fitted with a wide range of accessories to extend its capabilities, and it comes shipped with liquid sample holders for immediate use. Benefits: Robust and User-Friendly: The quartz-coated optics not only ensure durability and easy cleaning but also protect against corrosive environments, thereby extending the lifespan of the instrument. Cost-Effective: Designed for routine laboratory work, the Cary 100 provides reliable performance without incurring high costs, making it an economical choice for laboratories. Tailored Experience: The software's modularity allows users to customize their operations and processing tools to fit specific requirements, enhancing productivity and workflow. Versatile Applications: With applications spanning materials testing, petrochemicals, and biotech/pharma studies, this spectrophotometer is a valuable addition to any research setting. The PCB 1500 Water Peltier System is an efficient and precise circulating water bath designed for temperature-sensitive applications in laboratories. Utilizing Peltier technology, this system is ideal for maintaining controlled temperatures for various experiments, particularly in conjunction with thermostatted cell holders. Key Features: Precision Temperature Control: Offers a temperature control pr...

Condition: used, total length: 4,750 mm, total width: 2,640 mm, total height: 2,030 mm, Colour: White Empty weight: 3.500 kg The Bauerrichter ESR-1 is a polisher designed for creating high-gloss surfaces on various materials. Below is a summary of its technical specifications: Technical Specifications: CharacteristicSpecificationElectric connection380 V, 20 kDimensions (L x W x H)5,600 mm x 2,400 mm x 2,100 mmWeightAbout 3,000 kgWork table dimensions1,350 mm x 3,200 mmMaximum workpiece height< 100 mmDiameter polishing rollerØ 400 mmFeed rateFrequency controlled Characteristics: Polishing unit:Moves over a fixed work table and is equipped with an inclined, oscillating polishing roller. The height and oscillation speed are infinitely adjustable. Polishing roller: Equipped with special 400 mm diameter polishing rings that ensure longer life and lower operating costs. Quick-change system: Allows easy and quick replacement of polishing rings, reducing set-up time. Workpiece attachment: Standard equipped with a quick clamping system; optional vacuum clamping system is available for faster and more comfortable operation. Construction: Robust welded precision work table with phenolic resin bonded film plates, resistant to heat, moisture and chemicals. Drive: High quality SEW electric motors with energy efficiency class EFF1 (IE2), known for their robustness and durability. Iedpfx Abewnhxdjpsif This machine offers an efficient solution for polishing various materials and is designed with durability and ease of use in mind. - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 150610 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 1 - - Brush length [mm]: 1500 - - Brush diameter [mm]: 180 - - Motor power [kW]: 11 - └ Unit 2: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 7 - - Brush length [mm]: 75 - - Brush diameter [mm]: 180 - Max. working width [mm]: 1440 - Max. passage height [mm]: 250 - Infeed table length [mm]: 5150 - Outfeed table length [mm]: 5150 - Voltage [V]: 400 - Transport dimensions: 4750mm x 2640mm x 2030mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Slicer, Wedging, Coring & Stick Cutting Machine PND SS8 The PND SS8 is a professional fruit and vegetable cutting machine designed for the efficient processing of fresh produce. This versatile fruit processing machine is suitable for cutting, segmenting, and coring a wide range of products, including apples, pears, mangoes, kiwis, citrus fruits, pineapples, tomatoes, potatoes, cucumbers, and peppers. Thanks to its interchangeable knives, the machine produces precise slices, wedges, sticks, and segments with consistent quality. The PND SS8 offers a capacity of up to approximately 50 fruits per minute, making it ideal for fresh-cut companies, fresh produce processors, and the food industry. The robust stainless steel construction meets the highest hygiene standards and is easy to clean. Product-contact parts can be quickly removed, significantly reducing cleaning and maintenance time. The compact machine can be easily integrated into an existing production line. Its precise cutting technology minimizes product waste while maintaining optimal quality of the finished product. The PND SS8 is suitable for both small and large production volumes and provides a reliable solution for efficient fruit and vegetable processing. If you are looking for an industrial fruit cutting machine, apple cutting machine, mango coring machine, vegetable cutting machine, fresh produce processing machine, or fresh-cut machine, the PND SS8 is a durable investment combining speed, precision, and high processing capacity. Production capacity: 3,000 pieces/h Iedpezur Srjfx Abpjif Functions: Cutting, coring (pitting) Cutting shapes: Slices, wedges, sticks Installed cutting knife: Mango coring knife Voltage: 400 V (3 + N, 50 Hz) Power: 1 kW Weight: 580 kg Year of manufacture: 2014 Dimensions (W x D x H): 4300 x 2030 x 2550 mm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, spindle speed (max.): 12,000 rpm, tool weight: 1,000,000 g, number of axes: 5, This 5-axis Alzmetall GS 1000/5-FDT was manufactured in 2018. It features a spindle speed of 12,000 RPM and a tool capacity of 125-126 positions, utilizing HSK 63 A and T holders for versatile operations. The machine includes a robust table load capacity of 1,000 kg and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 1000/5-FDT vertical machining centre we have for sale. Contact us for further details. Iisdpfjzvb E Dex Abpsf - Tool Positions / Capacity: 125 - 126 tool positions- Tool Holder / Taper: HSK 63 A and T (T-holder with turning function & spindle orientation for full turn-mill operations)- Cooling System: 70 bar Internal High-Pressure Coolant, External Coolant, Internal & External Air Cooling- Coolant Tank Volume: 1000 L tank equipped with paper belt filter and police safety filter before the spindle- Axis Configuration: 5-Axis (Torque motors in A and C axes for simultaneous milling/turning)- Operating Hours: Approx. 6,000 hours- Automation & Interface: Media supply (hydraulics & air), automatic door, prepared for automation, interface installed (robot missing)- Spindle Protection: Double spindle protection- Auxiliary Equipment: Chip conveyor, extraction unit (LTA Air Cleaning), external cooling/chiller unit- Electrical Input: Reduced from 60 to 30- Defects / Known Issues: Cracks in the front view windows due to previous tool breakage; tool chain ribbon has 1 fiber from a flat ribbed belt wrapped around it, causing stiffness and occasional emergency stops (E-stops)

Condition: ready for operation (used), Abel EM-025Z0110-SG Electromagnetic diaphragm pump, serial number: 3001080-01 + Lenze GST06-2M VAL 090C12 spur gear reducer + MHEMAXX090-12C1C three-phase motor, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Ijdpji D Eygefx Abpoif

Condition: ready for operation (used), Abel EM-025Z0110-SG Electromagnetic diaphragm pump, serial number: 3001302-01 + Lenze GST06-2M VAL 090CM4 spur gear reducer + M55AP090M045E00CT three-phase motor, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Iisdpfx Aboi D Eykjpof

Condition: ready for operation (used), Year of construction: 2021, Circular Wood Saw manufactured in 2021. This CAN CUT MC 930 features a cutting width of 1,100 mm and a maximum cutting height of 50 mm. It operates with a feed speed of 5-20 m/min and can accommodate up to 15 saw blades with a maximum diameter of 250 mm. If you are looking to get high-quality cutting capabilities, consider the CAN CUT MC 930 machine we have for sale. Contact us for further details. • Cutting width: 1,100 mm • Maximum cutting height: 50 mm • Minimum panel length: 650 mm Ijdezu S A Ropfx Abpoif • Feed speed: 5–20 m/min • Feed motor: 0.75 kW, 1,410 rpm • Maximum power consumption: 22 kW, 380 V • Power: 30 HP • Maximum saw blade diameter: 250 mm • Saw shaft diameter: 70 mm • Saw blade speed: 3,500 rpm • Maximum number of saw blades: 15 • Working height: 900 mm • Noise level: 80 dB Additional equipment • Automatic transport rollers: 3 pcs. • Rubber rollers between the saw blades to reduce vibration of MDF panels and wood during cutting Technical Specification Cutting Range 1100 mm Feed Speed 20 m/min

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Iisdpfx Abexcnxdspsf Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Year of construction: 2018, condition: used, functionality: fully functional, The 2018 Kronen GS10-2 is a versatile and efficient slicing machine suitable for a variety of food processing applications. Designed by the reputable manufacturer Kronen, this equipment is engineered to deliver consistent performance in both small and large-scale operations. With its precise blade adjustments, it accommodates different slicing thicknesses, making it ideal for preparing fruits, vegetables, and other foods with ease. This used model maintains its robust build and reliability, ensuring long-lasting service while maintaining high safety standards. The machine's intuitive design simplifies operation and cleaning, contributing to reduced downtime and increased productivity. With user-friendly controls and efficient processing capability, the Kronen GS10-2 is a valuable addition to any food processing line seeking quality and efficiency. Iiodpfxszqnlas Abpjf

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,044 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, laser power: 6,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 fiber L76 FMC was manufactured in 2022. It features a working format of 3,000 x 1,500 mm and a powerful 6000W solid-state disk laser. The machine includes an automatic longitudinal pallet changer and advanced cutting capabilities, such as adaptive lens systems and automatic nozzle changers. If you are looking to get high-quality fiber laser cutting capabilities, consider the TRUMPF TruLaser 5030 fiber L76 FMC machine we have for sale. Contact us for further details. • Working format/area: 3,000 x 1,500 mm; X 0–3,000 mm / Y 0–1,500 mm / Z 0–115 mm • Machine design: Closed machine frame; gantry drive with direct linear drives; automatic longitudinal pallet changer; integrated control cabinets and storage cabinet; working-area lighting; machine status light; water/air machine and laser chiller; CE compliant; ambient temp 5–35 °C • Dynamics/accuracy: Max simultaneous axis speed 280 m/min; Ps 0.03 mm; Pa 0.05 mm; min programmable increment 0.001 mm • CNC control: Siemens SINUMERIK 840D sl with 21.5" color MultiTouch; MultiTouch HMI; USB and RJ45; integrated technology data; programmable cutting gas/pressure; production planning; multi-sheet processing; automatic shutdown; Remote Support interface; Condition Guide; Cutting Guide; Central Link; Online Update Manager • Laser source: TRUMPF TruDisk 6001 (6 kW) solid-state disk laser; fiber-optic beam delivery; one LLK output; closed beam guidance; high back-reflection resistance; stable output over service life • Cutting head: Universal cutting unit; single cutting-head strategy; adaptive lens system; protective glass with online condition monitoring; auto nozzle centering; collision protection; capacitive height control; automatic focal position; pilot laser • Standard cutting functions: AdjustLine; BrightLine fiber; ControlLine; FastLine; FlyLine; FocusLine; NitroLine; PierceLine; Performance package; Highspeed cutting package; Copper and Brass cutting packages; Micro-weld • Additional cutting package: Highspeed Eco (fusion cutting, medium-thickness stainless steel) with up to 70% cutting-gas reduction and up to 100% sheet throughput increase • Automatic nozzle changer: 21 positions; automatic change/cleaning/re-setting tied to material/process; reduces setup/handling • Drop&Cut: Integrated camera; assigns live image of residual sheet to part geometry; live cutting preview; no separate programming needed for basic use • Process monitoring camera: Front-area monitoring (~2.5 m); remote observation; preliminary result assessment; video stream output to external monitor • Pallet/material handling (machine-integrated): Automatic longitudinal pallet changer; loading/unloading parallel to machining; pallet access from three sides Additional equipment • LiftMaster Compact 1530 (AL34) automatic loading/unloading system • Type 1530; max sheet 3,000 x 1,500 mm; min sheet 1,000 x 1,000 mm Ijdszuzwdepfx Abpoif • Max sheet thickness 25 mm; max sheet weight 900 kg; max unloading weight 900 kg • With rake lifter: max thickness 25 mm; with rake lifter + belt system: max thickness 15 mm • Minimum part size with rake lifter: 150 x 150 mm • LiftMaster equipment/options • Storage connection; extended pallet travel out of machine • Sheet separation device; double-sheet detection; synchronous loading • Thin-sheet separation (0.8–2.0 mm); loading station for 90 mm stack height • Structural-steel loading grippers, 67 mm pitch, replaceable tines

Condition: new, functionality: fully functional, power: 205 kW (278.72 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH COMPACT-120 fully automatic concrete plant is a compact concrete production facility designed to offer high production capacity even in limited land conditions. Thanks to its reduced dimensions, it requires minimal space, yet delivers equivalent performance to stationary plants with a production capacity of 120 m³/h. This feature makes it an ideal solution, especially for urban projects, narrow construction sites, or projects requiring frequent relocation. The COMPACT-120 concrete plant can be manufactured with linear or square aggregate bunker options according to user needs. This allows for flexible use in both fixed and mobile plant concepts. Manufactured in compliance with CE standards, the plant offers significant cost advantages to businesses with its quick assembly, easy transportability, and low infrastructure requirements. Steel-legged cement silos eliminate the need for concrete foundations, while the aggregate feeding ramp can be conveniently prepared using a metal wall system. The 3 m³ capacity twin-shaft mixer used in the production line provides homogeneous mixing quality, while the plant's entire automation system is equipped with high-end components from SIEMENS and SCHNEIDER. The PLC-controlled system, with its advanced software interface, provides operators with ease of use and maximum control. COMPACT-120 Compact Concrete Plant Technical Specifications Iodpfxexp U Ils Abpsif Production Capacity: 120 m³/h Weight: 55 tons Total Motor Power: 205 kW Electric Generator Requirement: 300 kVA Mixer Type: Twin-Shaft Mixer Working Area: 600 m² Aggregate Storage Bunker: 4 x 30 m³ Aggregate Weighing Bunker: 4.5 m³ Aggregate Weighing Belt: 1,000 x 11,100 mm Aggregate Transfer Bucket Volume: 6 m³ Mixer Wet Concrete Volume: 3 m³ Cement Weighing Bunker: 1,800 kg Water Weighing Bin: 1,000 liters Additive Weighing Bin: 100 liters Air Compressor: 500 liters, 5.5 kW Cement Silo: Capacity options between 100 and 500 tons Control Type: Fully Automatic Why Should You Choose the COMPACT-120 Concrete Plant? CONSTMACH COMPACT-120 combines high production capacity with a compact design to offer investors maximum efficiency. With its low operating costs, easy installation, and portability, it is the perfect solution for both short-term and long-term projects. This plant, with all components from world-class brands, is designed for long-lasting and uninterrupted production. Offered with the CONSTMACH guarantee, the COMPACT-120 combines quality, durability, and engineering excellence in a single structure. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, maximum load weight: 34,200 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 06/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment list available upon request. Frame Regular ladder frame in lightweight steel construction with continuous crossmembers. Maximum distributed load of 30 tons evenly distributed over approximately 1.5 m around the center of gravity of the payload. Coupling plate approximately 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337. Coil trough with a length of approximately 9,000 mm (design according to VDI Guideline 2700) for accommodating coils with a diameter of at least 900 mm and up to 2,100 mm. Chassis Axle lift mechanism on axle 1. Control of the axle lift is fully automatic and load-dependent. Starting aid Activated by pressing the brake pedal 3 times; 30% overload up to a speed of 25 km/h. Operation on the chassis via a switch. Can also be operated from the cab (switch in the cab required - PIN 12). Three-axle unit SAF INTRADISC With disc brakes Ø approximately 430 mm, track width 120. Air suspension with approximately 180 mm of travel. Vehicle tires 6x 385/65 R 22.5, 160J 6 steel rims 22.5 x 11.75, offset approximately 120 mm (ET 120). Isdjzu Uvyjpfx Abpeif Chassis components Fifth wheel supports, mechanical, with compensating foot, 24-ton lifting capacity, single-sided operation on the right side when driving. Splash protection system (spray mist suppression) in accordance with Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with mud flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with mud flaps behind the axles. Lateral protection device according to ECE-R73. Storage for 8 square tube inserts, dimensions approximately 340 x 220 x 2,150 mm, installed behind the axle unit. 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installed at the rear, 1x on the left and 1x on the right. Brake / Air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function). Air suspension system including 1 lifting and lowering valve, mounted on the left side when driving behind the axle unit. Vehicle height is adjusted automatically. Floor Mounted version on both sides. Steel pallet load securing bars with VarioFix hole pattern (screwed on), on the left and right side when driving, for a width of approximately 2,468 mm (loading height reduced by approximately 20 mm under the outer frame). Flat floor approximately 30 mm thick, multi-layer glued plywood, recessed in the area of the coil trough. Coil trough side walls covered with plywood sheets approximately 18 mm thick. Floor caulked around the entire perimeter. Coil trough cover made entirely of wood, with a flat floor approximately 27 mm thick. Pocket for square tube inserts approximately 80 x 80 mm, arrangement according to drawing A2, 2 pairs on the longitudinal beam in the 1st and 2nd position, 8 pairs in the outer frame. 8 pairs of pockets in the coil trough for accommodating square tube inserts approximately 80 x 80 mm, arrangement: 1st pair at the beginning of the trough at the front, 2nd - 7th pair according to standard drawing, 8th pair at the end of the trough. Superstructure Quick clamping device at the front for the side tarpaulin with tensioning shafts and rocker arms. Quick clamping device at the rear for the side tarpaulin with tensioning shafts and ratchet. Meets superstructure strength according to EN 12642 XL (VDI 2700), tes

Condition: excellent (used), Specification - Work head Ijdpfx Aszh Nfcsbpsif Maximum work piece weight between centres 100kg Speed range30/450 rpm Centre - standard/reduced to 5MT / 3MT Swivel angle, clockwise / counterclockwise 15° /90° Wheelhead (X axis) Maximum diameter ground: using a 350mm dia wheel - 300mm Using a 300mm dia wheel - 350mm Total infeed 245mm Maximum programmable dia infeed rate 100mm/min Minimum programmable increment (dia) 0.001mm Swivel range clockwise / counterclockwise 190° / 45° External grinding wheels Wheel size (left) 350 x 50 x 127mm Wheel size (right) 300 x 25 x 127mmm Spindle speeds 1775, 2068, 240rpm Motor 4kW Internal grinding wheels Wheel size 19 - 38mm Wheel spindle speeds 16500,24000,10500rpm Motor 2.2kW Table (Z Axis) Maximum grinding length between centres: 1300X - 700 - 700mm 1300X - 1000 - 1000mm Maximum traverse speed 5000mm/min Minimum programmable increment 0.001mm

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm Iiodeh Nrh Ujpfx Abpsf D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: like new (used), Year of construction: 2021, machine/vehicle number: B440, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 300 rpm, rotational speed (min.): 60 rpm, Equipment: CE marking, rotational speed infinitely variable, OMAC B440 3600 VX Hygienic Rotary Lobe Pump Unit – Fully ATEX Rated – 2021 Complete hygienic rotary lobe positive displacement pump unit by O.M.A.C. S.r.l. (Italy), professionally decommissioned from an INEOS manufacturing facility. Fully matched ATEX drivetrain — pump, gearbox and motor all Category 2G (Zone 1) rated, suitable for installation in hazardous area environments. Suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Ready to install. Pump: Manufacturer: O.M.A.C. S.r.l., Italy Model: B440 3600 VX Year: 2021 Wetted parts: AISI 316L stainless steel Connections: 4" (DN100) hygienic tri-clamp ATEX: II 2G Ex h T4 Gb Gearbox: Motovario HR 101M helical reducer Ratio: i = 4.88 Torque: 530 Nm ATEX dual-rated Motor: Cemp E3AB70 132M-4 — 7.5 kW 400V Δ / 690V Y, 1462 rpm ATEX: Ex db IIB T4 Gb IP55, IE3 efficiency Inverter-rated (S9 variable speed duty, PTC 120°C thermal protection) Pump shaft speed approx. 300 rpm at 50Hz (approx. 60–300 rpm range on inverter) Complete unit mounted on a stainless steel baseplate with forklift access. Iedjzmgdaepfx Abpjif 3 identical units available — matched factory batch with consecutive serial numbers across pump, gearbox and motor. Price is per unit. Condition: New other. Excellent, clean condition throughout — see photos. Inspection welcome prior to purchase. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, This listing is for a IKA RCT B S002 Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The IKA RCT Basic Magnetic Stirrer is a highly versatile and reliable laboratory device, combining precision stirring with integrated heating capabilities. Designed for various lab applications, it ensures consistent performance, safety, and ease of use. Key Features: Isdpfx Absxxz Ukspjif Wide Speed and Temperature Range: Powered by a strong motor, it supports a high range of stirring speeds and operates with adjustable heating plate temperatures between 50°C and 310°C. Digital Display for Accuracy: Allows exact setting of temperature and speed, even when the unit is turned off, with a safety temperature limit displayed digitally. Hot Surface Warning: The Hot Top indicator alerts users when the heating plate remains hot, reducing the risk of burns. Automatic Safety Features: Switches off automatically if the connected external temperature sensor is not properly immersed, with timeout duration adjustable. Bushing for Contact Thermometer: Compatible with contact thermometers like ETS-D5, ensuring precise external temperature control for sensitive applications. Aluminum Heating Plate: Optimized for superior heat transfer and fast heating of samples. Enhanced Durability and Design: The enclosed assembly (IP 42) protects the unit against splashes and contaminants, extending its service life. Improved Magnetic Adhesion: Ensures stable stirring, even at higher speeds. Error Code Display: Provides digital error codes for straightforward troubleshooting.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Iodpfxszn Rdmj Abpjif Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: used, This listing is for the Transmed Sahara 111 Maxitherm Blood Warmer. The unit is in full working condition and ready for immediate use. High-performance dry-heating system designed for safe warming of blood products, plasma, and infusion solutions while reducing contamination risks in sterile clinical and laboratory environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Iisdpfxjy R U R So Abpjf • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for 1 of 4 Watson Marlow 323 Peristaltic Laboratory Pumps Each unit is in full working condition and is ready for immediate use Iedpfx Aeygmdhebpeif The Watson-Marlow 323 is a peristaltic laboratory and process pump designed for precise, controlled fluid movement, dosing and metering of liquids in scientific, pharmaceutical, biotechnological and industrial environments. It works by mechanically squeezing a flexible tube in a circular “rolling” action — this moves the liquid without it ever contacting internal pump parts, which reduces contamination and wear