Heavy Duty Lathe
HERKULES 2400X10000mm

Name: HERKULES 2400X10000mm
Brand: HERKULES
Availability: InStock

Condition

Used

Location

Ennepetal

Machine data

Machine type:: Heavy Duty Lathe

Manufacturer:: HERKULES

Model:: 2400X10000mm

Condition:: used

Price & Location

Seller location:: Scharpenbergerstr. 96-98, 58256 Ennepetal, Germany

Call

Details about the offer

Listing ID:: A20024875

Reference number:: 2065-AR1520

Update:: 30.06.2026

Description

turning diameter over bed 2400 mm
turning diameter over slide rest 2200 mm
turning length 10000 mm
power capacity 185 kW
faceplate diameter 1650 mm
turning speeds 1,5 -150 U/min
max. workpiece weight 70000 kg
clamping diameter 1400 mm
Technical data

Working range

Maximum turning diameter over support: 2200 mm
Maximum swing diameter over bed: 2400 mm
Maximum turning length: 10,000 mm

Clamping diameter in the headstock faceplate: 300 - 1,600 mm
with special jaws up to 2,050 mm

Clamping diameter in the tailstock faceplate: 300 - 1,400 mm

Maximum workpiece weight: 70000 kg

Main drive, faceplate

Faceplate diameter: 2000 mm

Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm

Maximum torque at rated speed: 220,000 Nm

Drive power of main motor: 185 kW

Flange centre point angle: 70°

Supports

Travel of the plunge slide: 500 mm

Travel of the face slide: 1400 mm

Quick adjustment, longitudinal: 2000 mm/min
Quick adjustment, face: 800 mm/min

Infinitely variable feed, longitudinal: 0.6 - 300 mm/min
Infinitely variable feed, face: 0.3 - 120 mm/min

Max. cutting force at support: 20,000 kg

Tailstock

Faceplate diameter (removable): 1650 mm

Faceplate clamping diameter: 1400 mm

Flange centre point angle: 70°

Quick adjustment: 1250 mm/min

Special equipment

Copying device for first support
Copying length 8500 mm
Max. copying depth in one pass 500 mm

Boring device: Boring bar 460 x 390 mm
Dodpfsxddvnjx Aggokt
Drilling diameter 600 - 1000 mm
Maximum drilling depth in one pass 2700 mm

At Ks of 200 kp/mm² - s max. = 1.5 mm/rev
a = max. chip cross-section 30 mm² at a projection of 1000 mm
Reduced chip cross-section with increasing drilling depth

A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length
(in one pass) of 2000 mm, adjustment accuracy ± 5 minutes.

A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length
(in one pass) of 1000 mm, adjustment accuracy ± 5 minutes.

125 kg auxiliary crane on spindle box.

Seller

Registered since: 2007

889 listings online

Call

Send inquiry

Telephone & Fax

+49 2333 ... show

Fax:

These listings may also fit your interest.

Listing

Vertical Machine Centre Fanuc Robodrill Fanuc ROBODRILL α-T14iAL

Lemmer

657 km

Vertical Machine Centre Fanuc Robodrill
FanucROBODRILL α-T14iAL

Call

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Table size: 850 × 390 mm Dedpfx Aoyw Inqjggjkt Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. ATC: 14 pockets Including: 3x machinevices 36 Toolholders Oilfilter Filtermist S800 Machine manuals Country of origin: Japan Motor power: 3.7 kW Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg

See details

Listing

CNC Lathe POREBA - TCF 160 Poreba TCF 160

Babberich

740 km

CNC Lathe POREBA - TCF 160
PorebaTCF 160

Call

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 100,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Dodpfjymk E Aex Aggskt Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Width 2950 mm Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Deephole Boring Machine FRORIEP CNC Tieflochbohrmaschine

Ennepetal

847 km

Deephole Boring Machine
FRORIEPCNC Tieflochbohrmaschine

Call

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Djdpfx Agexgu R Iogjkt Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

See details

Listing

Freudenberg

905 km

4 hi cold rolling mill 170 mm
Bühler

Call

Listing

Iserlohn

858 km

CNC cycle lathe
MONFORTSKNC 6

€15,500

ONO plus VAT

Call

Condition: good (used), Year of construction: 1995, CNC turning machine Manufacturer: MONFORTS KNC 6, Year: 1995 Djdpfx Agjhktd Nogokt Control system: Monforts MTC K. Center distance: 2000 mm Max. turning diameter over bed: 630 mm Max. turning diameter over cross slide: 380 mm Spindle speeds: 2 - 1800 rpm Spindle motor: 21/15 kW Spindle bore: 71 mm 3-jaw chuck FORKARDT 400 mm Tool holder Multifix size C with 3 tool pockets. Space requirement: Length 4000 mm, Width 2200 mm, Height 1900 mm Weight: approx. 5000 kg Complete machine documentation available. Machine can be demonstrated in operation.

See details

Listing

Floor type milling machine FPT Industrie VERUS

Montichiari

1,469 km

Floor type milling machine
FPT IndustrieVERUS

Call

Condition: used, Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 5,000 rpm, SPINDLE TAPER ISO 50 X LONG. TRAVEL MM.6000 Z SADDLE TRAVEL MM.1250 Y VERTICAL TRAVEL MM.2000 SPINDLE SPEED RPM.5000 FEEDS MM/MIN.8000 Dodpfxowz H Rfe Aggokt SPINDLE MOTOR POWER KW. 37 CNC HEIDENHAIN iTNC 530 REMOTE HAND WEEL FLOOR PLATES 7000x2000- 15 TON/MQ. TABLE 1080 X 7220 X H 820 MM ATC.40 CHIP CONVEYOR ROTATING HEAD IN CONTINUOUS TUPC 0,001°x0,001° COOLANT THROUGH THE SPINDLE 20bar FUNCTION RTCP FPT AUTOCAL EXTERNAL COOLANT TANK HEIGH & LOW PRESSURE WITH PAPER FILTER N.2 AUTOMATIC HORIZONTAL DIVIDERS WITH 2 SUPPORT TABLES N.1 PIECE PROBE

See details

Listing

Linear axis KUKA KRC4 Linearachse 1500/3T(2)

Freiberg am Neckar

1,119 km

Linear axis
KUKAKRC4 Linearachse 1500/3T(2)

€5,000

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143983 Serial number: 143983 The KUKA KRC4 linear axis is a high-precision and robust motion unit that is ideal for industrial applications. It ensures precise control of motion sequences and plays a central role in automation processes and robotic systems within production. Djdpfxevzxg Te Aggjkt Its stable construction ensures consistently reliable performance, even in the most demanding applications.

See details

Listing

Europa

1,195 km

Fine Blanking Press
FEINTOOLHFA 320

Call

Condition: excellent (used), Year of construction: 1987, pressure 320 t Djdpfx Agsvwgl Njgskt plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

See details

Listing