Used Epple E-Ap 1.020-10 for sale (86,060)

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Hfodpfszz Rpcjx Airjl - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2007, turning diameter 200 mm turning length 393 mm control Siemens 810D Hfjdpfszzfbyex Airjl weight of the machine ca. 3200 kg

Condition: refurbished (used), Year of construction: 1998, workpiece weight (max.): 15,000 kg, travel distance Z-axis: 1,000 mm, chuck outer diameter: 1,750 mm, spindle speed (max.): 400 rpm, turning diameter: 2,100 mm, turning height: 1,350 mm, rotational speed (max.): 3,000 rpm, feed force Z-axis: 50,000 N, year of last overhaul: 2026, The Millennium provides very high precision turning and versatile machining capability. Always precise, always powerful. Features of this machine:- – Involute chain drive for very high speeds, very low noise – a 36” diameter Timken cross roller bearing, the ultimate bearing – see last page – All steel 1750mm dia. 4 jaw chuck for high speeds. Maximum loading 15,000kgs. – A servo powered C axis control that provides backlash free C axis movement – high power and high accuracy – 200mm square forged steel ram - high accuracy heavy cutting when required and incorporating a 15KW ISO 50taper live spindle providing speeds 20 to 3000rpm for rotary contour milling, pcd drilling and angle milling and grinding with attachments (new heads can be provided to order). 1350mm maximum height under ram – Automatic pick up of turning tools, live tools and attachments from the 18 pocket tool magazine Hedpfxsy Uwxte Airefl – Raise and lower crossrail - high precision latching and clamping at 200mm pitches – flexibility without loss of accuracy Fanuc 18Ti. A very precise, powerful and versatile machine tool. Performs all functions shown in photo gallery 12 months guarantee

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: PV10150642, MACHINE SPECIFICATION Table size 1200 x 480mm X axis traverse 1050mm Y axis traverse 540mm Z axis traverse 560mm Hedpfx Aezguf Soirefl Spindle nose to table 80 – 640mm Spindle BT 40 Spindle speeds 20 – 10,000rpm Spindle motor 15kW Rapid feed rate X/Y/Z 32/32/24m/min Toolchanger capacity 24 Tools Approximate weight 6600Kg MACHINE EQUIPPED WITH: - Siemens 828D CNC control Swarf auger Coolant system Lighting Guarding

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours and in like-new condition. The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in like-new condition. This is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but has now been released for sale as part of a site relocation. • The order confirmation from ENGEL to NYPRO can be found in the documents. The original new price was approximately €330,000. Hsdpfxjwb Dl Ts Airjfl The selling price is €78,500 including crane. I can provide you with the technical data upon request, but it is also available in the documents below. Included in the price: Dismantling the crane onto two Euro pallets, as well as removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. If you are interested or have any questions, please do not hesitate to contact me. The machine is located near Karlsruhe and can be inspected there. Delivery is possible within a few days. You can find the order confirmation from ENGEL to NYPRO in the documents below!

Condition: used, Year of construction: 2017, machine/vehicle number: 1739289, input current: 10 A, protection type (IP code): IP20, welding current (max.): 2,000 A, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2,000 A at 2% duty cycle Protection class: IP20 Polarity: STD Design: Closed protective housing made of aluminum profiles Safety enclosure: With protective doors MACHINE DETAILS Control cabinet: Integrated Equipment cabinet: Mobile EQUIPMENT Signal light Welding torch Connection cable Mobile equipment cabinet Documentation Hedpfx Aiozzk Rmsrofl The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 49,641 h, stroke length: 200 mm, oil tank capacity: 100 l, travel distance X-axis: 300 mm, controller manufacturer: Bystronic, working width: 60 mm, bending force (max.): 40 t, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 955 mm, control type: CNC control, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, finger protection, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Model: Xpert 40/1030 Tonnage 400 kn Bending length 1030 mm Standard stroke [S] 200 mm Open height [D] 515mm Distance between side frames 1060mm Table Width 60mm Max. back gauge range X-axis 500mm X-axis travel 300 mm X-axis speed 1500 mm/s R-axis travel 100 mm R-axis speed 500 mm/s Z-axis travel 955 mm Z-axis speed 2000 mm/s Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Hedextf A Iopfx Airofl Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm 1.1 Xpert 40/1030 1.2 ByVision Bending control with 22 Inch Full HD display and touch technology 1.3 Dynamic drive system (DDS) with Energy Saver 1.4 Automatic tool protection 1.5 Ergo foot switch 1.6 Rear protection sliding door electrically controlled 1.7 User manual (on CD) 1.8 Ambient air temperature 7°C up to 35°C 1.9 Voltage: 400/480 V, 50/60 cycles, 3 Ph (other parameters available on request)

Year of construction: 2026, condition: new, functionality: fully functional, For sale: 4-10 cubic meter skip loader with a flap Product description: For sale is a 4-10 cubic meter skip loader with a flap, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: Hedpjzmhuyofx Airofl * Standard: Technical description 30720-1 * Base: 6 mm, steel S355 * Sides: 4 mm, steel S355 * All sheets and profiles are welded * Corner reinforcements * Double-sided 3-point tilting bearing (pin Ø45) x 2 – simple and safe emptying * Stacking rail: 5 mm * Securing rail * Frame edges: U 100 x 50 x 4 mm * Frame edges flap: U 100 x 50 x 4 / 100 x 50 x 6 mm * Information and warning stickers: white and red * Color: entire RAL color palette available * Coating: zinc phosphate primer inside and outside, painted with synthetic resin paint outside (80–100 μ) * Certificate: CE * Warranty: 2 years Advantages: * Robust construction for heavy materials * Easy handling thanks to the flap and sturdy hinges * Stackable and transportable with tipping truck systems * Weatherproof due to corrosion-resistant coating

Condition: used, Year of construction: 1992, x-travel 1000 mm y-travel 500 mm Hfsdpfx Ajzz S Rhjirsl z-travel 700 mm table surface area 1250 x 700 mm spindle tunring speed 20 - 3.200 U/min main drive motor 22 kW quill stroke 100 mm distance spindlenose - table min./max. 138/600 mm Feed ( x / y / z) 3.000 mm/min rapid traverse ( x / y / z ) 60/50/60 m/min total power requirement 27 kW In our opinion, the machine is in very good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile adjustable speed with air knives with pressure roler belt width 1000 mm dimensions (l x w x h) : ± 2.800 x 1.850 x 2.500 mm Hfodpfx Aisz Ahfdsrjl

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating pressure: 50 bar, high-pressure hose length: 1,500 mm, empty load weight: 100 kg, input voltage: 230 V, water tank capacity: 100 l, warranty duration: 12 months, We offer for sale a Pressure Washer combined with a vacuum cleaner AP 100/50M. The machine allows for the removal of residual water left on surfaces after pressure cleaning, which enables use even on floors without a drain. It is recommended for cleaning bathrooms and washrooms that need to be accessible immediately after cleaning. The AP 100/50 M is ideal for hotels and SPA centers, public facilities (stations, airports), industrial baths, restaurant kitchens, sports facilities, and many more. This is an essential machine for cleaning companies managing such premises. Hsdpfx Aijwz Nmpsrofl Condition of the machine – Very good Year of manufacture: 2014 All machines purchased from us come with a 12-month WARRANTY. Technical specification: Clean water tank: 100 l Dirty water tank: 70 l Maximum pressure: 50 bar Pump performance: 5 l/min Turbine power: 1800 W Pump power: 370 W Voltage: 230 V Weight: 100 kg

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection Hfjdpfx Aezy Dzieirol - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: excellent (used), functionality: fully functional, Magnet Plate 1,000 x 500mm, auto down feed. Hfsdpfx Aiez Ap Dbjrol

Condition: good (used), Year of construction: 2000, machine/vehicle number: M 100-34 E3-D, Offer 24371 Technical data: - Machine for the production of closed cold-formed corners - Material thicknesses 0.8 to 2.5 mm - max. achievable shelf height see table Hodpfx Asu Rarteirsfl - min. Workpiece length / min. workpiece width 120 mm - Production time per formed corner, independent of material 10 sec. - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm - Weight of station 2 approx. 500 kg

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 200x3100, functionality: fully functional, pressing force: 200 t, stroke length: 215 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, overall weight: 12,000 kg, controller manufacturer: Bystronic, working width: 3,100 mm, bending force (max.): 200 t, working range: 3,100 mm, control type: CNC control, number of support arms: 4, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, lower tooling, safety light barrier, upper tooling, Used High quality / very good condition Bystronic Xpert 3metre x 200ton cnc pressbrake for sale Bystronic Beyeler Xpert 200×3100 Make: Bystronic Model: Xpert 200 Year / new: 2008 Total axis: 8 – 6axis back gauge X1 X2 R1 R2 Z1 Z2 Hydraulic upper and lower tool clamping Hfedpfxsvua Ifj Airjl Tool stacking system Crowning Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 200ton Fully serviced with Bystronic Uk General Information: Model: XPERT2000x3100 Manufactured: 2008 Specification: Working length mm 3100 press force kN 2000 stroke mm 215 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150 Weigh 12,000kg

Year of construction: 2014, condition: not inspected (used), Ilapak Carrera 1000/40 Flowrapper Model Carrera 1000/40 Year 05- 2014 Serial Number 0640490091 Electric 400 V 50 Hz – 5000 watts Jaw width 250 mm Bar transfer conveyor through the jaws Infeed length 2.2 metres Overall length 3.95 meters Overall width 1.4 metres 1 x folding box 120 mm wide product 1 x folding box 140 mm wide product The Machine is in good working condition Hjdpfx Aiovkg A Isrefl It is offered at a huge discount to clear it from our stock Price reduced by 50 %

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping A control cabinet is not available and must be built by the buyer. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. Hfodpfx Aiezl E Stersl The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.

Year of construction: 2005, condition: used, Fabricant : Alfa Laval Model : Tetra pak C10-SM Year : 05 Type : Échangeur à plaque Application: pasteurizer Hjdox R A Edspfx Airefl Fluid group: 2 Volume: 533 L Pressure: 0/16.0 bar Temperature: 0 / 110°C Sections: 5 Plates: 64 units

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2004, next inspection (TÜV): 02/2027, loading space volume: 39 m³, Year of construction: 2004, Equipment: ABS, ALSO AVAILABLE AS A COMPLETE ROAD TRAIN!! AT EXTRA COST!! Stock no. 5771 36,000 L AP slurry tank body with HFR swap chassis / hydraulic arm with 3 knuckle joints / 10,000 L centrifugal pump / rear steering axle ---- * Manufacturer: Schwarzmüller chassis with AP tank * Type: Slurry tanker semi-trailer * First registration of chassis: 11/2004 * Year of tank construction: 2006 * Gross vehicle weight: 39,000 kg * Axles: 3 x BPW with 1st axle as lift axle / 3rd axle rear steering / drum brakes * Suspension: Air suspension with raise and lower function * Tyres: 385/65 R 22.5 approx. 50% tread * Colour: Chassis and tank body black-grey * EBS * AP slurry tank body, year: 2006 * 3-fold articulated hydraulic arm for loading/unloading with camera and 10,000 L centrifugal pump * Radio remote control * 6,000 L centrifugal pump at the rear for application * Reversing camera Hsdpfx Aoywq N Reirsfl * Fill level indicator front left * Service hatch front left * Docking funnel at rear * Individual mudguards * Full-length support legs * LED work lights * LED reversing lights German papers!! ALSO AVAILABLE AS COMPLETE ROAD TRAIN!! AT EXTRA COST!! Stock no. 5770 Scania R480 with dual-circuit hydraulics / adjustable fifth wheel coupling / 6x2 / full fairing / Topline ---- Manufacturer: Scania Model: R480 First registration: 09/2007 Mileage: approx. 1,208,916 km Transmission: Automatic Gross vehicle weight: 26,000 kg Unladen weight (registration): 8,630 kg Axles: 6x2 with 3rd axle as lift axle Wheelbase: approx. 3.10 m Suspension: Air suspension front and rear Tyres: 1st axle 385/65 R 22.5, 2nd axle 315/70 R 22.5, 3rd axle 385/55 R 22.5 Cab: Topline / 2 bunks Colour: Blue TÜV valid until: 02/2027 ABS Dual-circuit hydraulics Adjustable fifth wheel Roof spoiler Side spoilers Chassis fairing LED work lights in entry steps LED work lights on rear upper cab Beacons Sun visor Electric roof hatch Automatic climate control Auxiliary heater Refrigerator Electric windows and mirrors Heated mirrors Multifunction steering wheel Differential lock Cruise control CD radio German vehicle!! German papers!! Note on possible errors in this advertisement: Despite careful preparation, errors or inaccuracies may occasionally occur in the text or details. We do not accept liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or clarify any questions.

Condition: excellent (used), Year of construction: 2010, Arburg 470H 1000-400 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 09.2010 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 1 Hot runner control x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor with inverter drive - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/bottle with compressed nitrogen (additional load for fast operation) Central lubrication Integrated sorting flap Arburg Multilift Select robot 6kg transverse Year of manufacture: 09.2010 4-axis robot: 3 axes driven by servo motors (electric); C-axis - pneumatic Travel paths in axes: X-400, Y-600, Z-1800 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 5180 kg Hfedpfx Aijzy Iz Tsrol Length/Width/Height: 4.40x1.56x2.02 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 3,110 mm, travel distance Y-axis: 1,620 mm, number of axes: 5, number of slots in tool magazine: 11, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, This 5-axis SCM Morbidelli Author M100 CNC Wood Machining Centre was manufactured in 2018. It features a working area along the X-axis of 3110 mm and a maximum panel height of 180 mm. The machine is equipped with 21 vertical spindles and 10 horizontal spindles, providing versatile machining capabilities. If you are looking to get high-quality wood machining capabilities, consider the SCM Morbidelli Author M100 machine we have for sale. Contact us for further details. • Working area / axes: • Panel length (Y): 1900 mm (2210 mm) • Panel height (Z): 180 mm • Panel length for through machining: 1400 mm • Vector speed X‑Y: Pro‑Space 56 m/min; Pro‑Speed 78 m/min • Worktable: 6–12 beams (TV Flex), 12 vacuum pods (145 × 145 × H75 mm); 2 stops per beam; movable beam length 1600 mm. • Drilling unit (general spec): • 21 vertical spindles, 8,000 rpm • 10 horizontal spindles, 8,000 rpm • Integrated saw Ø125 mm (X), 10,000 rpm • Motor power 2.2 kW • Electrospindle: 10 kW (S6), max 24,000 rpm. • Installation requirements: installed power 23–28.5 kVA; compressed air 450 NL/min; dust extraction 4500 m³/h, 25 m/s, outlet Ø250 mm. • Structure and motion: • Heavy, stress‑relieved, electro‑welded steel frame; all machining in single setup on CNC metalworking machines. • High‑speed four‑row linear guides; three‑circuit recirculating ball systems; X‑axis helical rack‑and‑pinion. • Brushless motors, inverters; machining units mounted on mobile gantry for rigidity. • Transparent polycarbonate safety enclosure. • CNC control and software: • PC‑Office: Windows 7, 17" color LCD, QWERTY keyboard, mobile control panel, Xilog Maestro. • Xilog Maestro features: parametric/graphical/ISO programming; DXF/ASCII import (2D); 3D linear/circular interpolation; spatial linear interpolation; helical interpolation; guided editor; automatic drilling optimization and tool libraries; panel origin offset; simulation; barcode management (software); self‑diagnostics; step‑by‑step manual intervention; graphical unit configuration; machining speed selection; SCM CNC Jerk function. • Safety: CE; PRO‑SPACE system with safety bumpers (automatic stop on potential collision). • Table equipment included/mentioned: rear aluminum reference stops H75 per beam; second central reference stops per beam; front reference stops H75 per beam. • Vacuum system: integrated vacuum pump 90/108 m³/h, 50 Hz. • F23 L drilling unit (listed configuration): • Independent Z‑axis • 13 independent vertical spindles (8 X / 5 Y) • 6 independent horizontal spindles (quick‑release), incl. 4 in Y • 32 mm pitch • Speed 4,500–8,000 rpm (inverter) • Rear‑panel groove/saw unit Ø125 mm, 5,500–10,000 rpm (inverter) • Motor 2.2 kW • Increased Z‑pressure • RO AX advantages: high productivity, precision, finish quality, processing speed; up to 90% reduction in maintenance (approx. 1,000‑hour interval). Additional equipment • TRB14 side‑mounted tool magazine (optional), right side: • Capacity up to 11 tools; max Ø350 mm • Center distance 130 mm • Max tool weight 8 kg; total 48 kg Hodpfxez A Ahqj Airefl • 4 workpiece lifting supports H75, two lifting levels (above clamps and working level), 20 kg per support • Additional hardware key with USB port

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,000 h, Bystronic DNE1012FCCB – 500 Watt: a compact and reliable fiber laser cutting machine from Shenzhen DNE Laser (Bystronic Group). The machine is in very good technical condition, has few operating hours, and is ideal for the precise processing of smaller sheet metal formats. The system is available immediately and can be inspected and tested at any time after prior arrangement. Technical data: • Power: 500 W fiber laser • Table dimensions: 800 mm * 1,100 mm • Working area: 600 mm * 1,000 mm • including extraction system • approx. 4,000 operating hours • Year of manufacture: 2017 Hfsdpfx Aijz Akqcerel • Connection value: AC 380V / 50Hz

Condition: used, axle configuration: 3 axles, first registration: 12/2003, color: other, Year of construction: 2003, Empty weight: 6.500 kg Axle 1: left 10 mm right 16 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right10 mm Hsdpfxsx Elfie Airjfl We have the possibility to stack trailers! 

Year of construction: 1989, condition: good (used), For sale is a fully functional welding positioner from APS. Model 1000 E Year of manufacture: 1989 Machine number: H1-008 Speed range: 0.3-1 rpm Hfsdpfxjcl Ttvs Airsl 64mm hollow shaft Tilts left and right approximately 135° Space requirement: approximately 1700x1700mm Weight: 750kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, Well-maintained, used E Brake by Safan Hjdozbhk Espfx Airjfl Type E Brake 100 3100 Capacity 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Manual crowning Hydraulic Wila NS top clamp