Used Orwak 5030 for sale (127)

Year of construction: 2025, condition: new, functionality: fully functional, - 350 mm max. cutting height - 75-250 mm min/max Cutting width - 100 - 350 mm min/max logs - 18-80 mm side board - 1,8 - 6m Cutting length - 550 mm saw blade diameter Lodpfshkh Npox Adtjrk - 4/6 saw cuts simultaneously - 5-30 m/min variable feed speed - 2x30 KW and 2x22 KW saw motors - 3 KW SEW feed gear motor - automatic 6-fold width adjustment - infeed table with 3 fold turning device - 2 centering roller pairs pneumatic pressure - driven infeed roller with 0,75 KW and pneumatic pressure - 2 driven outfeed roller pairs with 0,55 KW each - 4 pneumatic pressure roller pairs in the outfeed

Condition: new, machine/vehicle number: 068983c41e44eb5660fa9100c, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 435/50 r19,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins X-tra Long, with 15030 mm internal length Outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm Extension ladder at the rear Door retainer at the side 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle Impact protection at the rear Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system AAC Basic, automatic relief axle acting on last axle, as maneuvering aid, up to 20 km/h, can be switched off manually Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 435/50 R19.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Side amber LED lighting coupled with the blinker Flashing side lights Side lights 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions 3 pairs of sliding stanchions can be moved along the entire length, with 4-fold pockets and with long pocket at the bottom. 3 pairs of stanchion positions Insertion slats 5 rows of wooden slats Rear wall / rear corner stanchions Rear corner stanchions steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Stainless steel tension locks Roof Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof rail when loading and unloading Lsdei Riwuspfx Adtork EcoLift - lifting roof can be raised by approx. 380 mm, on both sides, with gas pressure damper support, 3 driving positions at the front: Front interior height approx. 2900 mm / 2950 mm / 3000 mm, adjusted to approx. 3000 mm Optimum rain strip at the rear, at the top of the end bows,

Condition: as good as new (ex-display), Year of construction: 2013, machine/vehicle number: F130507, functionality: fully functional, input voltage: 400 V, spindle mount: MK 3, drilling depth: 135 mm, height adjustment type: mechanical, total width: 510 mm, total length: 870 mm, total height: 2,050 mm, throat depth: 320 mm, table width: 450 mm, table length: 500 mm, drilling capacity: 30 mm, column diameter: 120 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 65 rpm, Dear Sir or Madam, Ljdjv T Atnspfx Adtsrk We are offering a demonstration pillar drill "HXMC model Z5030A" with paint damage. We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted.

Condition: excellent (used), GABBIANI SA350 300/130 tracked multi-saw Made in Italy - insert for short elements - used multi-saw, very good condition TECHNICAL DATA track width 300mm roller width 300mm maximum cutting height 130mm maximum disc diameter 350mm disc hole diameter 70mm Lredpfx Aevtzlisdtok from above: 2 rows of pawls + smooth pressure, sliding roller + pressure + shaft with saws + 2 smooth pressure and sliding rollers +

Condition: ready for operation (used), functionality: fully functional, 8 pieces servo amplifiers - MXA81A-004-503-00 - 2.2kW Ledpst Suatsfx Adterk Price: negotiable

Condition: ready for operation (used), functionality: fully functional, 1 piece servo amplifier - MXA81A-008-503-00 - 4.5 kW Price: negotiable Lrodpfxet Subks Adtok

Condition: ready for operation (used), functionality: fully functional, 2 pieces servo amplifier - MXP81A-010-503-00 - 10kW Price: negotiable Lsdpfxet Suyys Adtjrk

Condition: refurbished (used), This servo controller (servo module) from the Indramat brand is for sale. Model: KDS 1.1-150-300-W1-220 Number:234608 Lodpfx Asrr Tbcedterk K42/92 The controller has been overhauled and tested. Fully functional! Please contact us if you have any further questions or are interested. Installation can also be organized on request.

Condition: used, This servo controller / module from the Indramat brand is for sale. Model: KDS 1.3-150-300-W1 Ljdpfx Asrr Tgljdtork Number: 253924 K06/96 Good, used condition. Fully functional! Please contact us if you have any further questions or are interested. Installation can also be organized on request.

Year of construction: 2006, condition: excellent (used), machine/vehicle number: 5030SC-158, Technical data Manufacturer: Cimcore Type: Infinite 5030 SC Ljdoim H R Djpfx Adtork Year of manufacture: 2006 Certificate date: 05.05.2014 Serial number: 5030SC-158 Opric sensor: perceptron ScanWorks V4 Further data on request. The machine can be modernized with new accessories according to customer requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer! Note: Our offer is intended exclusively for professional customers! (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved!)

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), fuel type: electric, color: other, overall weight: 14,750 kg, Year of construction: 2026, Jaw Crushers generally crushes 150 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1160 • Type: Primary Jaw Crusher • Inlet Dimensions: 1000 X 600 mm • Jaw Opening: 40-140 mm • Max Feeding: 600 mm • Capacity: 150 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 90 Kw • Bearings: Heavy duty SKF-FAG • Weight: 14750 kg • Dimension: 2730 x 1326 x 1082 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Lrodpfx Aoy Dpldsdtsk

Condition: used, functionality: limited functionality, Ferwood Code: RU0008196 - Manufacturer Code: MDR60A0750-503-00 - Condition: Used - Functionality: Limited functionality - Compatible Machine: CNC - LOADING UNLOADING IMA - BARGSTEDT - MEINERT - If interested we offer an overhaul service, contact us. Lodjv Hgcyepfx Adterk

Condition: excellent (used), power: 15 kW (20.39 HP), overall weight: 200 kg, Year of construction: 1995, Hidrostal Submersible Pump 15kw sewage pump manufacturer HIDROSTAL Type: Year of manufacture: 1995 Delivery capacity: 250-300m3/h Lsdpfx Aoruax Uodtork lifting height: 21m Power: 15kw 400v 50Hz 32.5A revolution: 1410 rpm protection: IP 54 Sizes: height: 1050 mm width: 700mm weight: 200 kg

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), gearing type: automatic, fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, CONSTMACH JC-3 mobile jaw crushing and screening plant is a powerful and efficient solution designed for crushing and screening extremely hard rocks such as granite, basalt, and gabbro, which have high abrasiveness and high silica (SiO₂) content. The JC-3 is manufactured using durable materials, first-class engineering, and high-quality workmanship to ensure long-lasting performance. Its compact, dual-chassis design allows for easy transport and quick setup in field conditions. The plant's first chassis is equipped with a vibrating feed hopper, CJC-110 jaw crusher, bypass belt, feed belt, hydraulically supported mobile chassis, and dust suppression system. The second chassis houses a METSO HP 300 or equivalent cone crusher, a 3 or 4-deck vibrating screen, a return belt, foldable stockpile belts, and an advanced automation system. The PLC-based control system, featuring SIEMENS – SCHNEIDER branded electronic components, enables fully automatic operation. Optional diesel generator integration is also possible. The JC-3 has a production capacity of 250–300 tons/hour and can process material with a maximum feed size of 1,100 x 850 mm. Three or four different product fractions can be obtained simultaneously. If more fine material or cubic products are required, the plant can be converted to a JCV-3 configuration with a V-80 mobile sand making plant containing a VSI crusher. JC-3 Mobile Crushing and Screening Plant Technical Specifications Production Capacity: 250–300 tph Maximum Feed Size: 1,100 x 850 mm Main Configuration: Jaw Crusher + Cone Crusher + Vibrating Screen Total Motor Power: 450 kW Electric Generator Requirement: 800 kVA Plant Weight: 100 tons (total of two chassis) Plant Dimensions: 1st chassis 13×3.4×4.5 m / 2nd chassis 20×4.4×4.5 m Chassis Type: Wheeled double chassis equipped with hydraulic opening legs Why Choose the JC-3 Mobile Jaw Crushing and Screening Plant? Ledpfx Aoxpvwusdtsrk CONSTMACH JC-3 provides maximum efficiency at your construction site with its high production capacity, short setup time, and superior crushing performance. The user-friendly automation system offers full control with minimal operator intervention, while the durable chassis structure allows for years of uninterrupted operation. With CONSTMACH's engineering power, spare parts support, and after-sales service, the JC-3 more than pays for your investment. If you are looking for power, reliability, and mobility in a single unit, the JC-3 is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, fuel type: hybrid, Year of construction: 2026, CONSTMACH JS-3 mobile jaw and impact crushing plant is a compact, high-efficiency solution designed for crushing low to medium hardness rocks such as limestone, river rock, dolomite, and basalt. Its dual-chassis design combines crushing, screening, and stockpiling operations into a single system. The first chassis features a vibrating feed bunker, CJC-110 jaw crusher, bypass belt, feed belt, and hydraulically supported wheeled chassis; while the second chassis houses the CSI-1215 secondary impact crusher, 3-deck vibrating screen, return belt, and foldable stock conveyors. This structure enables high-capacity production and superior cubic-shaped aggregate. The JS-3 is equipped with a high-tech PLC automation system and SIEMENS–SCHNEIDER brand electronic components. Thanks to its user-friendly design, it can be set up quickly and easily commissioned. It can be operated without the need for external equipment such as cranes or loaders thanks to the hydraulic opening feed bunker and conveyor system. It can also operate independently of the power grid with an optional diesel generator system. JS-3 - Mobile Jaw and Impact Crusher Technical Specifications Production Capacity: 250–300 tph Lodpfx Asxpw Uuodtork Maximum Feed Size: 1,100 x 850 mm Feed Height: 6.3 m Main Configuration: Jaw Crusher + Secondary Impact Crusher + Vibrating Screen Total Motor Power: 490 kW Electric Generator Requirement: 850 kVA Plant Weight: 105 tons (total) Plant Dimensions: 1. Chassis: 13x3.4x4.5 m / 2. Chassis: 20x3.85x4.5 m Chassis Type: Hydraulic-mounted, wheeled dual chassis Why Choose the JS-3 Mobile Crushing Plant? CONSTMACH JS-3 stands out among portable crushing and screening solutions with its durability, high production capacity, and easy operation. Manufactured with high-quality materials and superior engineering, this plant offers minimum maintenance requirements and maximum efficiency. With its quick setup, low operating costs, and excellent aggregate quality, the JS-3 is the ideal choice for businesses seeking a long-lasting and reliable investment in the mobile crushing sector. With the CONSTMACH guarantee, you get high performance and uninterrupted production in every project. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), gearing type: automatic, fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, CONSTMACH JC-3 mobile jaw crushing and screening plant is a powerful and efficient solution designed for crushing and screening extremely hard rocks such as granite, basalt, and gabbro, which have high abrasiveness and high silica (SiO₂) content. The JC-3 is manufactured using durable materials, first-class engineering, and high-quality workmanship to ensure long-lasting performance. Its compact, dual-chassis design allows for easy transport and quick setup in field conditions. The plant's first chassis is equipped with a vibrating feed hopper, CJC-110 jaw crusher, bypass belt, feed belt, hydraulically supported mobile chassis, and dust suppression system. The second chassis houses a METSO HP 300 or equivalent cone crusher, a 3 or 4-deck vibrating screen, a return belt, foldable stockpile belts, and an advanced automation system. The PLC-based control system, featuring SIEMENS – SCHNEIDER branded electronic components, enables fully automatic operation. Optional diesel generator integration is also possible. The JC-3 has a production capacity of 250–300 tons/hour and can process material with a maximum feed size of 1,100 x 850 mm. Three or four different product fractions can be obtained simultaneously. If more fine material or cubic products are required, the plant can be converted to a JCV-3 configuration with a V-80 mobile sand making plant containing a VSI crusher. JC-3 Mobile Crushing and Screening Plant Technical Specifications Production Capacity: 250–300 tph Maximum Feed Size: 1,100 x 850 mm Main Configuration: Jaw Crusher + Cone Crusher + Vibrating Screen Total Motor Power: 450 kW Electric Generator Requirement: 800 kVA Plant Weight: 100 tons (total of two chassis) Plant Dimensions: 1st chassis 13×3.4×4.5 m / 2nd chassis 20×4.4×4.5 m Chassis Type: Wheeled double chassis equipped with hydraulic opening legs Why Choose the JC-3 Mobile Jaw Crushing and Screening Plant? CONSTMACH JC-3 provides maximum efficiency at your construction site with its high production capacity, short setup time, and superior crushing performance. The user-friendly automation system offers full control with minimal operator intervention, while the durable chassis structure allows for years of uninterrupted operation. With CONSTMACH's engineering power, spare parts support, and after-sales service, the JC-3 more than pays for your investment. If you are looking for power, reliability, and mobility in a single unit, the JC-3 is the right choice for you. Ledpfx Adsxp Scyetsrk What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 905 kW (1,230.46 HP), color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH JCV-3 is a three-chassis mobile crushing plant designed for high efficiency, specifically engineered for both crushing hard rocks and producing high-quality fine material. This system, combining the JC-3 mobile crushing plant with the V-90 mobile sand-making plant, processes durable materials such as granite and basalt with superior performance. The JCV-3 is manufactured with sophisticated engineering, using long-lasting components and high-quality steel parts. Ljdpfx Adsxpv Hpotjrk The plant consists of three main modules: The first chassis includes a vibrating feed hopper, a bypass belt, and a powerful CJC-110 jaw crusher. The second chassis houses the METSO HP300 or equivalent cone crusher, a two-deck vibrating screen, and folding-type stockpile belts. The third chassis is equipped with a VSI 800 CR vertical shaft impact crusher, a three-deck vibrating screen, return belts, and a PLC-controlled automation system. The JCV-3 has a production capacity of 250–300 tons/hour and processes materials up to a maximum size of 1,050 x 800 mm. It is possible to obtain five different product fractions simultaneously. The plant can be used in the field with minimal labor thanks to its quick assembly and commissioning feature. In addition, its portability and flexibility have been increased with options for an electric generator and a hydraulically openable system. JCV-3 Mobile Crushing and Screening Plant Technical Specifications Production Capacity: 250–300 tph Maximum Feed Size: 1,050 x 800 mm Main Configuration: Primary Jaw + Secondary Cone + VSI Total Motor Power: 905 kW Electric Generator Requirement: 1500 kVA Plant Weight: 120 tons (total of three chassis) Plant Dimensions: 1. Chassis 13x3.4x4.5 m / 2. Chassis 20x4.4x4.5 m / 3. Chassis 19x4.4x4.5 m Chassis Type: Three-wheeled chassis equipped with hydraulic opening legs Why Choose the JCV-3 Mobile Jaw Crusher? CONSTMACH JCV-3 is the most efficient solution for modern quarrying and mining operations with its superior crushing performance, high capacity, and portable design. The Siemens–Schneider automation system offers reliable operation and easy control. Its structure, which can quickly adapt to field conditions, ensures continuity in production. As CONSTMACH, we offer high quality, technical support, and a long-life guarantee with our facilities, each manufactured to European standards. By choosing the JCV-3, you can achieve maximum efficiency and minimum cost advantages in production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer Ledpsl Dvt Iefx Adtsrk -Heavy-duty transport wagon: Industrial trailer with 2-axle turntable steering -Platform: 3500/1450/H645 mm, dimensions see photo technical drawing -Load capacity: 4 t -Tires: Solid rubber -Number: 2x transport trolleys available -Price: per piece -Transport dimensions: 5030/1690/H1460 mmm -Weight: 1100 kg/unit

Condition: used, maximum load weight: 30,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2017, next inspection (TÜV): 01/2027, Equipment: ABS, * Schmitz 3-axle aluminum tipper approx. 26 m³ * SKL 24 SL 7.2 * Lifting axle * Disc brakes * Air suspension * Ride height control * Platform * Okuslide * Sliding tarpaulin * Schmitz axles * MOT 01/27-SP 07/26 * Unladen weight 5030 kg Lrsdpfey Arpcox Adtsk

Condition: excellent (used), Year of construction: 2016, ARBURG A 470 H 1000-170 HIDRIVE (32.000 h) (S&P 3796) Ljdpey D Rqzsfx Adtsrk Manufacture year: 2016 Operating hours: 32,000 Stunden Screw: 30 mm Injection pressure: 2000 bar Stroke volume: 85 cm³ Clamping Force: 100 t Tie bar distance: 470 x 470 mm Mould installation height min.: 250 mm Plate distance max.: 850 mm Dimensions: 4100 x 1700 x 2400 mm Eeight: 5030 kg Connected load: 21 kW Accu, Robot Interface EM67, EM73, Airvalve Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Lodpfxjw Sy T Hs Adterk Storage location: Nattheim

Condition: good (used), Please read the technical specifications carefully. If the machine is a potential investment for you, we kindly ask that you provide full identification with a correct telephone number and email address before we can issue an offer. LOG-O-MATIC (Mainaschaff/Germany) Surface Grinding Machine FS 5030 AH Year of manufacture: 4/1991 Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal, cross, and vertical feed Accessories/Features: - Electromagnetic chuck approx. 500 x 300 mm - Manual wheel dresser on the carrier - Paper band filter - Coolant system - Machine lamp - Machine feet Additional accessories: - Side-, angle-, and radius dressing device Lsdpfx Asxz R Niodtork - Balancing scale - Demagnetizing plate The machine is in very good condition and comes from a training facility. Available from March 2026.

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW Ledpfx Adoxhg Ibotork - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: like new (used), functionality: fully functional, power: 7 kW (9.52 HP), saw blade diameter: 305 mm, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Ljdpfx Aswrn Efsdtjrk Machine available from stock. Delivery, commissioning, and training available upon request.

Year of construction: 2007, condition: used, functionality: fully functional, Hello, we are selling our epoxi mixer and applicator Wagner colora. The machine is in working condition but it needs some cleaning and small repairs. We use it for the mixing of the A component Tenax RESINA 5030 and B component Indurente BB30H and use it for the stone slabs reinforcement. The machine is mounted on the mobile steel plate with wheels. For the working it needs 2x 240V power supply for the heating belt for both components and compressed air for working. In the offer is also a lot of spare parts like an extra application gun, a lot of mixers for the resin, one way valves, set of gaskets for the both dosing cylinder. I can send an video of working. Lredeym Uubjpfx Adtsk Best regards,