Used Panametrics Hygrometer Moisture Analyzer for sale (398)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 Rjdpfx Amjzhub Ao Tocd A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, functionality: unexamined, machine/vehicle number: SX-50, Used Cameca SX-50 Electron Microprobe Cameca SX-50 electron microprobe is used (Electron Probe MicroAlalyses). it has a 6” inch stage, 3 WDX Spectrometers with several Cristals LiF, PET, TAP, ODPb, PC1, PC2, PC3. Rcsdjwnb D Topfx Am Tod Electron probe microanalysis (EPMA) are generally considered micro-analytical techniques which are able to image or analyze materials we can not generally observe with the resolution offered by visible techniques System is complete with all Books, service Manuals, Software and computer. Also many parts. 1 x Leybold Trivac D16B Vacuum Pump 1 x Alcatel 2012 A Vacuum Pump 2 x integrated Turbo Pumps

Year of construction: 2015, condition: used, functionality: unexamined, machine/vehicle number: 116.067.00, 2 Walzen Ramisch Guarneri calender, type RGK 280.2000, configured as an inline calender with expansion stages for double-sided Simili mercerization of Jacquard cotton fabrics: 2-steel roller system with unwinding and rewinding units, Maier rotary head (cooled version), moisturizing system after unwinding, centrally controlled and braked unwinding, metal detector, seam monitor, stationary introduction system (3 rollers) motorized for tension regulation, 2 cooling rollers, rewinding combination (large bobbin winder with center winder), crane runway above the unit, 2x Yale overhead cranes (manually movable via chain). The condition can be seen from the attached appraisal report. Rjdpfx Aoyiurrom Tjcd

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ. 1) Bale shredder MHB: Special price from €24,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency inverter (FU) - this regulates the speed of the scraper bed. The bales are placed on the scraper bed and the feed of the shredder is activated. The shredder's tines tear the straw from the bale and fling it into the hopper. Ideally, the combination of a bale shredder and a straw shredder offers the best solution. Technical data, bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill, kW number of the straw mill). Without a straw mill, the bale shredder can process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (L x W x H) Shredder motor: 5.5 kW, 380 Volts Scraper bed feed: 0.75 kW, 380 Volts Dimensions: 3750x1730x2460 mm (L x W x H) Weight: 400 kg Rsdpfob Nulhsx Am Tjcd 2) Straw shredder MHZ 600 - 11/15 kW; immediately available Special price from €6,995 net Additional cost for the even larger straw shredder (18.5 kW): €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm hole size With star-delta switch, overload protection and 8 m power cord, ready for connection Discharge spout: 160 mm Throwing distance approx. 12 m Dimensions approx. 1600 x 1020 x 1360 mm (L x W x H) Weight approx. 240 kg --- Options at extra cost: Feed auger: + €970 net Cyclone separator (mounting by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: from €1,620 net Special shredder extension, 3 m *other sizes can be calculated + €9,750 net Briquetting press MPP 180 S; little used demonstration unit 70 mm briquette - up to a maximum of 100 kg/h from €39,700 net * larger machines on request --- Description: The muetek bale shredder has been developed for shredding round and rectangular bales of hay and straw. The shredder attached to the bale shredder shreds straw from all types of cereals, hay, corn and miscanthus. The muetek machines of the MHZ / MHB series are characterized by a robust construction and solid design. The muetek bale shredders of the MHB series are equipped with a chain conveyor, on which the straw bale is placed with a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredder rotor, and the feed speed is adjustable. The shredder rotor is equipped with several teeth, which tear open the straw bale. The straw separated from the bale is ejected. --- In principle, the machines work for dry source materials: - Straw - Hay --- Shredding hemp only works with a special shredder Additional cost approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the source material: Moisture content max. 12%

Condition: used, Used focus parameter monitor for monitoring and analyzing laser processes in industrial production facilities. The system is used for process monitoring and quality control of laser optics and laser machining processes. Rsdpfozdni Ejx Am Tecd Manufacturer: PRIMES Device type: Focus Parameter Monitor Model: FPM Condition: used Year of manufacture: 2018 Serial number: 16358 Communication interface: PROFINET 2 x Ethernet port COM interface DCP interface Service access available Status display: Link Tx/Rx MAC address: 00:03:F4:0B:04:B0 IP address: 192.168.116.119 Robust industrial housing made of aluminum Integrated carrying handle For laser process monitoring and focus analysis Location: Kusel Quantity: 2 units available

Condition: as good as new (ex-display), Demonstration unit with 7 operating hours immediately available (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Year of manufacture: 2023 Infeed opening 800x1000 mm Motor: 22 kW; 400 V - 50 Hz - 3 phase Blades: multiple-rotation hydraulically actuated slide Screen size selectable (10 - 40 mm) Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star/delta start - fast hydraulics - auto. OFF when rotor is idling - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Shredder raised by 30 cm (preparation for conveyor belt) Additional shredder options: - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - The moisture content (as received) must be below 30%, - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. Rcjdev Sqrpopfx Am Tjd

Condition: good (used), Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm Rodswbd Twopfx Am Tscd -Weight: 7.9 kg

Condition: like new (used), Year of construction: 2014, briquette diameter: 150 mm, overall weight: 3,000 kg, power: 30 kW (40.79 HP), Capacity: 450-500 kg/h Max. pressure force: 1700kg/cm2 Batch moisture content: 15% Rodpjqd Uy Aofx Am Tecd Length: 1800 mm Width: 1800 mm Height: 1900 mm Transport height: 2200 mm Weight: 3000 kg Total power: 33 kW

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted Rcodowc Ri Iopfx Am Tsd 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Rcjdeupyw Eepfx Am Tjd Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. Rsdpfxswc Nrne Am Tjcd The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Rodpfjwc Rk Eox Am Tocd Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Rsdpfjwc Afhsx Am Tscd Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Redpfod Hkqhsx Am Tecd Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, Year of construction: 2023, Capacity: 15 - 70 kg/h Briquette diameter: 60 mm Automatic start-up: Yes Oil preheating system: Yes Material moisture content: max. 15% Hopper size: octagonal, diameter 750 mm Hopper height: Dimensions: 1500 mm x 900 mm x 1065 mm (L x W x H) Rcsdpfxek Utq De Am Ted Motor power: 5.5 kW Control cabinet: electronically controlled via PLC Weight: 450 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Rcedszg Dx Uepfx Am Tod Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: new, Year of construction: 2025, empty load weight: 2,100 kg, total length: 6,000 mm, total height: 2,400 mm, 🚢 20ft Storage Container – As New (Year of Manufacture 2025 / 2026) – Available Immediately! High-quality shipping container in almost new condition – perfect as storage space, workshop, site container, or for professional transport. ⭐ Your Benefits at a Glance 🆕 Year of manufacture 2025 / 2026 – as new 💪 Extremely robust steel construction (2 mm wall thickness) 🌧️ Wind and waterproof 🔐 Securely lockable with 4-bar door locking system Rcodporgpvljfx Am Tsd 🚚 With CSC plate – suitable for worldwide transport 🌬️ Integrated ventilation to prevent moisture 🪵 High-grade wooden flooring 🛠️ Forklift pockets in the floor 📏 Dimensions & Technical Data 📐 External dimensions: 6,058 × 2,438 × 2,591 mm 📦 Internal dimensions: 5,898 × 2,350 × 2,390 mm 🚪 Door opening: 2,343 mm 🧱 Volume: approx. 33 m³ ⚖️ Tare weight: approx. 2.25 t 🏋️ Payload: up to 30 t These containers stand out for their durability, security, and versatility – ideal for commercial, construction, crafts, or demanding private use. 📬 Enquire now – we will provide you with a tailored offer! 👀 Further container sizes & variants available. 🚛 Nationwide delivery available (at additional cost).

Condition: new, Year of construction: 2025, 🚢 20ft Storage Container – Like New (Year of Manufacture 2025 / 2026) – Available Immediately! High-quality shipping container in near-new condition – perfect as a storage space, workshop, construction site container, or for professional transport. ⭐ Your advantages at a glance: 🆕 Year of manufacture 2025 / 2026 – like new 💪 Very stable steel construction (2 mm wall thickness) 🌧️ Wind and waterproof 🔐 Securely lockable with a 4-point door locking mechanism 🚚 With CSC plate – transportable worldwide 🌬️ With ventilation against moisture 🪵 High-quality wooden floor 🛠️ Forklift pockets in the floor 📏 Dimensions & technical data: Redpfxeg S Aius Am Tjcd 📐 External dimensions: 6,058 × 2,438 × 2,591 mm 📦 Internal dimensions: 5,898 × 2,350 × 2,390 mm 🚪 Door opening: 2,343 mm 🧱 Volume: approx. 33 m³ ⚖️ Tare weight: approx. 2.25 t 🏋️ Payload: up to 30 t These containers impress with their durability, safety, and versatility – ideal for commercial use, construction sites, trades, or demanding private use. 📬 Request a quote now – we will create a customized offer for you! 👀 Other container sizes & variants available.

Condition: repair required (used), Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm Redpey I Srzjfx Am Tscd - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: used, functionality: fully functional, The Selco NEOMIG 242 is a classic, extremely robust MIG/MAG welding machine from the Italian premium manufacturer Selco (which was acquired by voestalpine Böhler Welding several years ago). Unlike modern, fully digital inverter machines, this is a stepped, electromechanical transformer system. This means that it is considerably heavier and larger than a modern compact inverter, but it is considered practically indestructible in metalworking shops and workshops, with an enormous service life and a very stable arc. Technical data at a glance Feature Value / Specification Welding process MIG/MAG (gas-shielded welding) Connection voltage 400 V (3-phase / three-phase) Welding current range 30 – 240 A Duty cycle 30% at 240 A60% at 170 A100% at 131 A Voltage levels Multi-stage, manually adjustable Rcjdpfxozd S Rye Am Tod Wire feed Integrated, mechanical roller feed Max. power consumption approx. 8.3 kW Cooling Typically gas-cooled (standard hose package) Important features & practical advantages Classic transformer technology: Since no sensitive electronics are installed in the power unit, the NEOMIG 242 tolerates dust, metal grinding dirt and moisture much better than modern inverters. It also operates absolutely reliably under harsh conditions in the workshop or on-site. Excellent welding properties: Selco was known in the industry for its perfectly matched copper transformers and chokes. The system provides a very spatter-free, smooth and even arc in steel, stainless steel and also in thinner aluminum applications. Intuitive operation without unnecessary features: No complicated digital menus. You select the appropriate welding level, adjust the wire speed on the potentiometer and can start immediately. Using toggle switches, modes such as 2-cycle / 4-cycle (for long seams) as well as spot and interval welding can also be activated. Used market assessment: Since this series is no longer produced new, it is a real insider tip on the used market for workshops and ambitious DIY enthusiasts. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Year of construction: 1992, condition: good (used), Offline coating system with 2 coating and drying stations. Profiling, moisture measurement via electrical IR or impact (Voith). Characteristics: * Capacity: max ~ 184,000 tons/year * Width: 4800 mm * Speed: up to 1,400 m/min * Diameter of jumbo roll: max. 2600 mm Rsdpszdn H Djfx Am Tjcd * Coating weight: 6–14 g/m² (per side) * QCS system: Lippke | Honeywell * DCS system: Siemens | Teleperm

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers) Rsdpfxozdr Ile Am Tscd

Condition: new, -Dimensions (A x B x C): 1610 x 1272 x 1392 mm -Max. dough piece weight: 700 g Rjdpfx Amsxv R Rcs Tecd -Number of compartments: 31 -Part No.: 7309535 -Ball capacity per compartment: 8 -Total ball capacity: 248 -Power: 0.37 kW -Voltage: 400 V -Frequency: 50 Hz - 1.06 A -Weight: 380 kg The RP manual intermediate prover is a resting chamber for dough, loaded and unloaded manually, which allows the dough to relax for the necessary time after dividing and before final shaping. During resting time in the RP manual chamber, the dough balls ferment gently and gain some volume, which enables them to become more supple and easier to shape. This chamber is specially designed for artisan bakers who want to optimally preserve their dough’s quality. Standard baskets can hold pieces up to 650 g. Optional germicidal treatment available for enhanced hygiene. DURABILITY: -Painted steel frame provides great rigidity to the chamber. An oversized chain is used for the 'large wheel' of the proving nests to extend the service life of the chamber. -Smooth gear operation ensures extremely quiet machine performance. VERSATILITY: -Equipped with electrical sockets for a moulder and divider, allowing for integrated workflows. -Manual left/right control button available, with a highly ergonomic hands-free control option. HYGIENE: -Proving nests made from polyester to prevent moisture buildup. Iedcvyqoxv R Rcsi Aobd -Optional integration of a germicidal lamp. The listing was translated automatically. Translation errors are possible.

Condition: used, - Serial number: 10114243 - 2 levels, 5/10 trays, 400x600 mm - Year: 04-2007 - Model: Haube.SC - Programmable digital control panel - LED lighting - 8-speed ventilation - Steam injection - Steam function - Voltage: 230V - Refurbished equipment: The equipment is reconditioned upon order; lead times for servicing and delivery are agreed upon at that time (please inquire for the post-refurbishment price) - Professional convection oven Wiesheu is widely used for baking all types of bakery products: bread rolls, croissants, cookies, etc. The Wiesheu Euromat is a classic convection oven featuring intelligent controls. The steam system ensures baked goods with a golden, crisp and highly appetizing crust. Furthermore, this oven can serve as an attractive centerpiece for any pastry shop, bakery, or retail counter thanks to its appealing design, while the visibility of the baking process helps increase sales of all products. - Optimal air distribution ensures uniform baking results in the hot air oven. HUMIDIFICATION: Rapid steam generation with the right amount of moisture for each type of pastry. Rjdpfx Ameyabi So Tocd

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Rcjdpfxsyb Nc Ns Am Tsd Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.