Automatic spray booth
ROMER Automat Automatic spray booth

Name: ROMER Automat Automatic spray booth
Brand: ROMER Automat
Availability: InStock

Year of construction

2020

Condition

New

Location

Skarżysko-Kamienna Poland

Automatic spray booth ROMER Automat Automatic spray booth

Show map

Machine data

Machine type:: Automatic spray booth

Manufacturer:: ROMER Automat

Model:: Automatic spray booth

Year of construction:: 2020

Condition:: new

Price & Location

Location:: ul. Rejowska 99, 26-110 Skarżysko-Kamienna, Polska

Call

Details about the offer

Listing ID:: A4881102

Update:: 17.05.2024

Description

Use of one photocell
Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags.
A plate with identification holes is placed over the suspension.
Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating.
Vertical detection of the detail of the workpiece.
The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece.
Application of light gates with multiple sensors horizontally and vertically.
This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators.
Benefits of using gates and photocells
The benefits of using photocells or light gates are primarily energy and powder savings.
Eliminate painting of a zone in which there is no detail.
With the use of light gates, precise control of the guns.
Our lines can be optionally equipped with photocells, or light gates
Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags.
A plate with identification holes is placed over the suspension.
Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically
This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings
Eliminate painting of a zone in which there is no detail
Dedpfx Agjfy T Arj Recf
With the use of light gates, precise control of the guns
The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Seller

Registered since: 2020

93 listings online

Call

Send inquiry

Telephone & Fax

+48 41 23... show

These listings may also fit your interest.

Listing

Voerde (Niederrhein)

791 km

Chamber filter press

Call

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Dedpfjqakbrjx Ag Recf Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

See details

Listing

Conveyor system LORENZ + ARKU BRM 50/620.9 + AH 3000/ST-M

Neunkirchen am Brand

1,175 km

Conveyor system
LORENZ + ARKUBRM 50/620.9 + AH 3000/ST-M

Call

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 Dcedpfx Aohigmbjg Rof passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

See details

Listing

Punching and nibbling machine Trumpf TruPunch 3000 Large Format

Birmingham

339 km

Punching and nibbling machine
TrumpfTruPunch 3000 Large Format

Call

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, punching force: 18 t, working range: 30,001,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, Very well maintained and fully serviced used Large format Trumpf 3000 cnc punch press for sale Manufacturer TRUMPF Type TruPunch 3000 (S11) Year 11/2012 Working area 3000 x 1500 mm - without reposition Dcedpfoxrnggex Ag Ref Working range on cross-side (X-axes) 3000 mm Working range along (Y-axes) 1600 mm Large throat 1600 Complete with multi tool capability Type S11 Video available upon request

See details

Listing

Articulated Jib Platforms Manitou 180 ATJ 4RD ST5 S1 RC

Friedrichsdorf

991 km

Articulated Jib Platforms
Manitou180 ATJ 4RD ST5 S1 RC

Call

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 135 h, load capacity: 230 kg, empty load weight: 7,600 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated boom lift Transmission: Hydrostatic Condition: As new Technical condition: Very good Front tyres type: Solid rubber Front tyres size: 18 Front tyres condition: 80 - 100% Rear tyres type: Solid rubber Rear tyres size: 18 Rear tyres condition: 80 - 100% Dcedoupauqjpfx Ag Ref Description: The 180 ATJ articulated boom lift offers a lifting capacity of 230 kg with a working height of 18.19 m. It meets all requirements for outdoor work on uneven, sloped, and obstructed surfaces. Its off-road capability makes it the ideal working partner on construction sites with rough terrain. Thanks to the new progressive hydraulic speed control, both noise levels and fuel consumption are reduced. Like other engine-powered work platforms, its 4-wheel drive and 3 steering modes make maneuvering and positioning the machine easy on congested or tight sites. The design of the control panel ensures a clear operating environment for quick handling and immediate productivity. 230 V generator and sockets in the platform basket, SMS Safe Man System

See details

Listing

Punching machine Heidelberg Dymatrix 145 CSB

Schwalmtal

793 km

Punching machine
HeidelbergDymatrix 145 CSB

Call

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation Dodpst E Nthjfx Ag Recf ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

See details

Listing

Centerless Belt grinding tube finishing Löser RP-S 371

Dietzenbach

1,016 km

Centerless Belt grinding tube finishing
LöserRP-S 371

Call

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. Dedpfxepugwis Ag Recf The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

See details

Listing

Aurach

1,160 km

Tool cutter
DECKELFP 1

Call

Condition: good (used), Please read the technical specifications in full. If you are considering the machine as an investment, we kindly request your complete identification, including a valid telephone number and email address, in order to provide you with an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of the milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Spindle speed vertical/horizontal: 40 – 2,000 rpm Number of gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z-axis: 1200 mm/min Feed Y-axis: manual Fixed angular table: 600 x 210 mm Swivelling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data are not binding! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed backwards. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z axis - The machine underwent partial overhaul by a specialist company several years ago. Equipment: - 3-axis HEIDENHAIN digital readout - Micro-cooling spray unit - Fixed angular table - Chip tray - Machine lamp - Machine feet Further accessories available upon request! Djdpfx Agoxyc Tke Rscf Condition: good to very good, from training workshop Available from March 2026

See details

Listing

DOWEL CROSS-CUT AND CHAMFERING MACHINE Löser AA220

San Giovanni Al Natisone

1,577 km

DOWEL CROSS-CUT AND CHAMFERING MACHINE
LöserAA220

Call

Listing

Leipzig

1,137 km

Graphite seals
unbekanntverschiedene

Call

Listing

Flat Bed Punching and Embossing Machine Heidelberg Promatrix 106 CS/CSB

Germany

1,034 km

Flat Bed Punching and Embossing Machine
HeidelbergPromatrix 106 CS/CSB

Call

Year of construction: 2021, condition: ready for operation (used), Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible. Dcjdpfjw Tc R Rjx Ag Rjf

See details

Advertise here