Used Vela-Veb 2014 Vela-Veb Mh2330 for sale (1,723)

Condition: good (used), VEB Fritz Heckert FU 250x1000 milling machine Manufacturer: VEB Fritz Heckert Type: FU 250x1000 X-axis: 900 mm Y-axis: 300 mm Z-axis: 380 mm Speed: 28-2800/min Speed: 10-630 mm/min Dimensions: 1240 x 340 mm Nedpfx Aotryc Njm Tscw Speed: 6 kW, 35 A Load: 1.7 t Dimensions: 1580 x 1420 x 1470 mm

Condition: used, functionality: fully functional, Maximum working diameter: 2100 mm Nsdpfx Asylprfjm Tecw Table size: 1800 mm Minimum diameter: 200 mm Maximum number of teeth: 45 Max. module: 20 Weight: 40 tons

Year of construction: 1977, condition: good (used), 2 units of emergency power generators, East Germany (GDR) Engine manufacturer: VEB SKL Magdeburg, GDR Type: 8NVD26 A2 Year of manufacture: 1977 Continuous power: 294 kW Maximum power: 323 kW Displacement: 52.96 liters Compression ratio: 14 Speed: 750 rpm Njdpfx Aoigyt Hom Tscw Specific fuel consumption: 224 g/kWh Fuel consumption in 8 hours: 640 liters Boost pressure ratio: 1.38 Charge air temperature after turbocharger: 60°C Generator: Manufacturer: VEM Dessau Type: SSED 509-8a Voltage: 400 volts Electrical power: 330 kVA Power factor (cos. φ): 0.8 Dimensions: Length 4270 mm, Width 1516 mm, Height 2030 mm Total weight approximately 8500 kg per unit !! Further information available only by telephone !!!

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Njdpoy D Rk Isfx Am Tecw Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Manufacturer: WMW (Germany) Ncodpfjytirnsx Am Tow Model: GFL-400 Centre Height: 205 mm Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: used, Year of construction: 1985, Offer 25995 Technical Data: - Pressing force 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm - Max. installation depth with straightening bar 1050 mm - Max. installation depth without straightening bar 1400 mm - Stroke speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. B 3600 x H 1400 x T 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material Ncjdpewp Egusfx Am Tjw - Straightening bar 1300 x 400 mm with over - Threaded spindle, laterally adjustable supports

Condition: good (used), machine/vehicle number: 14012, Offer 14012 Technical data: - Length approx. 3000 mm - Width approx. 1500 mm - Material thickness of the top plate approx. 55 mm - Total height of the ribbed plate approx. 185 mm Nodpew Rnf Isfx Am Tjcw - Subframe - Total height with subframe 730 mm - Weight approx. 3500 kg

Condition: excellent (used), Magnet dimensions: 60 x 20 cm, working area: 22 x 65 cm Nsdpfx Asy Ittgsm Tscw

Condition: good (used), Year of construction: 1985, machine/vehicle number: 5028830, Offer 26070 Technical Data: - Max. load capacity in horizontal position: 7500 kg - Faceplate dimensions: 1500 x 1500 mm - Motorized tilting of the faceplate: 0 – 120° - Rotational movement electrically adjustable, stepless: 0.0028 – 1.04 rpm - Right and left rotation - Welding current transmission: approx. 500 A Ncjdpoyrfxbjfx Am Tew - Drive: 400 V x 25 kW - Table height in horizontal position: approx. 1600 mm - Handheld remote control - Required space approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg

Year of construction: 1961, condition: used, functionality: fully functional, machine/vehicle number: 15/15/61, VEB Ellma Double-ended tenoning machine - 1100, manufactured in 1961. Machine designation and size: KS Manufacturing number and year of construction: 15/15/61 Total weight: 5.55 t Wiring diagram: G1-106/1 Sp Wiring diagram code: Lp Voltage type: ~ Frequency: 50 Hz Operating voltage: 380 V Nedozavpgepfx Am Tecw Control voltage: 220 V Connected power: 15 kW Machine rated current: 28 A Auxiliary machine rated current: 2 A Time-delay fuse: 25 A The used double-ended tenoning machine is in working order; it was mainly used for precisely cutting door components to length. The electrical components have recently been replaced, including a new electrical panel, as well as the feed motor and speed control mechanism. The machine has 2 vertical saws and 8 milling cutters, including 2 horizontal saws.

Condition: ready for operation (used), Year of construction: 1990, Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible. Ncodew U T Ucopfx Am Tow

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7486, functionality: fully functional, spindle mount: MK 2, total width: 480 mm, total length: 620 mm, total height: 1,295 mm, overall weight: 165 kg, spindle speed (max.): 2,800 rpm, spindle speed (min.): 450 rpm, stroke length: 100 mm, Solid bench drilling machine for individual or series production in good condition (used). Ncjdpfx Aowgfkusm Tew

Condition: good (used), For sale is an external cylindrical grinding machine of the brand VEB Werkzeugmaschinenbau and of the type SU 200/1x800 The machine is fully functional and ready for immediate use Technical data Grinding diameter: 200 mm Sanding length: 800 mm orbital diameter: approx. 160 mm Headstock speed: 200-1000 1/min Nodpfxerdf Hgj Am Tscw Headstock: MK2 Grinding wheel diameter: approx 330 mm Table size: 900 x 200 mm Dimension: 3050x1300x1430 Weight: 4.6 tons On request, loading and transport (Europe-wide) can be organized for an extra charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. Nedpfx Ameu U Hvwo Tjcw The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.

Condition: good (used), Year of construction: 1971, functionality: fully functional, machine/vehicle number: 12.02-37-31, grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, grinding diameter: 125 mm, grinding length: 200 mm, type of input current: three-phase, overall weight: 5,000 kg, workpiece diameter (max.): 125 mm, nominal power: 28 kW (38.07 HP), The machine was used exclusively for grinding piston rods with a diameter of 10 mm. Ncodsw E D Euspfx Am Tew

Condition: used, Automatic vertical packaging machine for sachets and pouches with bulk products such as spices, powders, sugar, and more. Nedjyipmqopfx Am Tscw The machine produces four-side sealed sachets. Technical parameters: 1. Output: 35 - 72 pcs/min (2,100 - 4,300 pcs/h depending on size) 2. Sachet dimensions: - width: 105 - 135 mm - length: 150 - 180 mm 3. Portion size: 90 - 240 cm3 – accurate disc dosing. 4. Motor: 600 W 5. Heating elements – power: 3120 W 6. Overall dimensions: - length: 1010 mm - width: 1350 mm - height: 2200 mm - weight: 850 kg - year of manufacture: 1988 The machine is used and in working condition. The date printer requires repair or can be replaced with another date marking unit.

Condition: used, VEB Polygraph 882/2-18 gathering machine 18 gathering stations Features suction feeding Ncjdpfx Ajx Ab Ncsm Tjw 3-phase power, requiring 2-10 kW of power consumption at 440 V

Condition: used, Year of construction: 2014, Hardinge GS200 CNC Lathe 2010 Hardinge GS200 CNC slant bed lathe equipped with Fanuc Series Oi-TD control. ----- Control Fanuc Series Oi-TD CNC Control ----- Capacity Chuck Size: 3 Jaw Bar Capacity: 52mm Maximum Swing: 457mm Maximum Cutting Diameter: 284mm Maximum Cutting Length: 406mm Distance Between Centres: Not specified ----- Main Spindle Maximum Spindle Speed: 5,000 RPM ----- Turret Number of Stations: 12 ----- Axis Travels X Axis Travel: 218mm Ncodpsylchtofx Am Tow Z Axis Travel: 406mm ----- Accessories Hydrafeed Multifeed 65 Barfeed Swarf Conveyor Control: Fanuc Spec: Spindle bore 52 mm | Max Swing 457 mm | Travel X 218 Z 406 mm Accessories: Tailstock, parts catcher & 8" Power Chuck, Swarf conveyor, Collet chuck

Condition: used, Year of construction: 2014, Colour: Grey Empty weight: 4.000 kg Price: On request - Machine available from: 2026-01-26 - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 89867 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Drilling unit present: Yes - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - Table length [mm]: 3600 - Table width [mm]: 1800 - Working range X [mm]: 3765 - Working range Y [mm]: 1875 Ncjdoxr Evlopfx Am Tow - Z-axis working range [mm]: 324 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2014, total length: 9,100 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: air, tire size: 385/65R22.5, color: grey, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - Aluminum rims - Air suspension - Disc brakes - Tool box = Notes = KEMPF SKM 35/3 Tipper Insulated 2014 BPW axles Lift axle Alcoas Tool box German semi-trailer Chassis number: WKY3S0035EM029050 EXPORT SERVICES ————— • Austrian transit registration/license plate with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with semi-trailer The prices for export services are exclusive of the offer price. Please contact us for more information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. = Further Information = Nodpfjx U D Hdsx Am Tjcw Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Max. axle load: 9000 kg; Tire tread left: 60%; Tire tread right: 60% Rear axle 2: Aluminum rims; Max. axle load: 9000 kg; Tire tread left: 40%; Tire tread right: 40% Rear axle 3: Aluminum rims; Max. axle load: 9000 kg; Tire tread left: 40%; Tire tread right: 40% Weights Unladen weight: 5,260 kg Payload: 29,740 kg GVWR: 35,000 kg Functional Tipper: Rear Condition Technical condition: very good Optical condition: very good Further information Please contact Olivier Geerts or Edwin Geerts for more information.

Condition: used, Year of construction: 2014, operating hours: 11,517 h, Colour: Grey Empty weight: 6.000 kg - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Enclosed fence, Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 Ncjdpfx Amox E Uk Uj Tow - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - CNC documentation available: USB stick - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2014, operating hours: 1,350 h, machine/vehicle number: 14 083-1, Seydelmann K126 HU all stainless steel bowl cutter with rare option of fitted tote bin loader. Bought new in 2015 and only used for cutting herbs. Only used for 1,350 hours since new. Nsdsvcqh Ejpfx Am Tecw

Condition: used, Year of construction: 2014, Overhead crane VHT Type: K4GN1D Series: VK electric chain hoist Year of manufacture left hoist: 2014 Lifting capacity: 1500kg Lifting height: 4000mm Power: 1.5/0.36kW Voltage: 400VAmpere: 3.5/1.9A Frequency: 50Hz Nodpfx Ajzi Ui Aem Tjcw Price per piece Total weight of the machine: 75kg - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Lifting capacity [kg]: 1500 - Lifting height [mm]: 4000 - Dismantled: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, Folding machine MBO Navigator K8 S-KTL/6 Year: 2014 Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder: FP 120 - Pump Folding unit Ncedpsy Rlv Ssfx Am Tew MBO K8 S-KTL/6 - Parallel fold unit with 6 buckle plates: 78 cm - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hood over the entire folding section Delivery Palamides Alpha 500 Plus

Condition: good (used), mileage: 531,642 km, power: 345 kW (469.07 HP), first registration: 05/2022, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,180 mm, total width: 2,550 mm, total height: 3,970 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Heated Mirrors - Digital Tachograph - Driver's Cab (Control Unit) - Fixed - Globetrotter - Halogen Lamp - Manual - Radio/Cassette - Lane Keeping Assist - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8260 kg, Gross vehicle weight: 20500 kg, Total tank capacity: 1055 liters, 2nd Diesel Tank, Height of the fifth wheel coupling: 110 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Suspension type: Air suspension, Type of cab: Globetrotter, Cruise control, Driver's Cab (Control Unit), Digital Tachograph, Air conditioning, Stand-alone air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, GPS navigation, Color: Blue, Heated mirrors, Lighting type: Halogen lamp, Lane Keeping Assist, Air conditioning, Seat heating, Bluetooth, Engine power: 345 kW (463 Hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, I-PARK-COOL = Further Information = Transmission Transmission: VOL, 12 gears, Automatic Axle Configuration Tire size: 315/70R22,5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 11 mm; Tire tread depth right: 11 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 5 mm; Tire tread depth right inside: 4 mm; Tire tread depth right outside: 3 mm; Suspension: Air suspension Weights Unladen weight: 8,260 kg Payload: 12,240 kg GVW: 20,500 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: 1,082 € per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages Ncsdpezik A Sefx Am Tsw • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.