Used Wobbler Feeder for sale (2,432)

Condition: used, Pneumatic Vibratory Feeder, Explosion-Proof Vibrating Trough, Pneumatic Vibratory Conveyor, Used Machine Manufacturer: NetterVibration Type: Netter NTK Overall dimensions: Width: 950 mm Depth: 430 mm Height: 1340 mm Trough dimensions: Discharge opening size: 155 × 125 mm Width: 670 mm Depth: 420 mm Height: 250 mmPneumatic Vibratory Feeder, Explosion-Proof Vibrating Trough, Pneumatic Vibratory Conveyor, Used Machine Manufacturer: NetterVibration Type: Netter NTK Overall dimensions: Gedpfx Alezat Elj Sokc Width: 950 mm Depth: 430 mm Height: 1340 mm Trough dimensions: Discharge opening size: 155 × 125 mm Width: 670 mm Depth: 420 mm Height: 250 mm

Condition: ready for operation (used), Vibratory feeder, bowl feeder, vibratory parts feeder, Used machine Manufacturer: MHK Type: KWF 30 Overall dimensions: Gedpfx Asyyckrjl Sskc Width: 300 mm Depth: 300 mm Height: 220 mm Electrical data: 230V, 50Hz, 6A Bowl size: 190–260 mm

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: AB00022616, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 901 kg, SCM Class TI 145ep shaper in CE version, manufactured in 2022. Equipped with the READY 3 UP system, featuring a shaper fence with mechanical programming, a FAST sectional table with manual adjustment, and a support for the feeder with manual vertical and horizontal movements. Interchangeable shaper arbor with MK 5 coupling, tool holder cone MK 5 with adapter and clamp (right), and a T-SET rapid tool clamping system. LL version with 2 cast iron table extensions for profiling. Gkodpfx Aoz Nggrsl Sjc

Condition: excellent (used), Year of construction: 2012, Description Specification Manufacturer TATUNG-OKUMA Model GENOS L300E-M Manufacturing Date 30 January 2012 Serial Number PEA258 CNC Control OKUMA OSP P200LA-R MCS3 Machine Type CNC Turning Centre with Driven Tools CE Declaration of Conformity Available Tool Turret 12 Stations Tailstock Included Parts Catcher Listed in machine documentation Bar Feeder Interface Listed in machine documentation 2. Machining Capacity Description Specification Maximum Turning Diameter Ø300 mm Gjdpfjz Nyvtjx Al Sekc Maximum Turning Length 1,060 mm Maximum Swing Over Bed Ø520 mm X-Axis Travel 235 mm Z-Axis Travel 1,144 mm Main Spindle Speed 30–3,000 rpm Spindle Nose A2-8 Main Spindle Motor Power 11 / 7.5 kW (30 min / continuous) 3. Turret and Driven Tools Description Specification Tool Turret 12 Stations Turret Type M-V12 Driven Tool Capability Yes Driven Tool Speed 45–4,500 rpm Driven Tool Motor Power 7 / 3.3 kW C-Axis 360° C-Axis Indexing Resolution 0.001° 4. Equipment and Features - OKUMA OSP P200LA-R CNC control system - 12-station tool turret - Driven tooling capability for milling and drilling operations - C-axis positioning - Tailstock - Parts catcher (indicated in documentation)

Condition: good (used), Year of construction: 2005, 1 x used gatherer Manufacturer: Müller Martini Model: Prima S Year of manufacture: 2005 Gjdoz Rv S Tjpfx Al Sjkc Condition: good, in production, can be inspected Configuration: 6 x stations with undercarriage 4 x standard feeders 1 x folding feeder 1 x card gluing feeder 1 x stitching unit with 2 stitching heads HK75 1 x three-knife trimmer (without trimming cut) 1 x Semko thickness measurement 1 x automatic bundle delivery system Palamides delta 703

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO manufactures and installs stationary type stone crushing and screening plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 750 Tons/hour capacity of Crushing and Screening Plant: Gjdpfxoz Ryn Ss Al Sekc - Feeding Bunker (50 m3) -1300x5000mm Double Stage Wobbler Feeder - PDK-150 Primary Impact Crusher - 2000x6000x2 Vibrating Screen - DMK-03 Secondary Impact Crusher - 75 m3 Stock Hoppers - 20 m3 Hopper for Vertical Shaft Impact Crusher - VSI-1000 Vertical Shaft Impact Crusher with open rotor - 2000x6000x3 Horizontal Vibrating Screen - Stock and Feedback Conveyor Belts - Control Cabin, Electrick Panel and Cables FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75            ONLY 3,800 hours 1 x SEMKO side caliper with reject 6 x section feeders 1551 1 x cover folder feeder 1528 1 x three knife trimmer 1565 Gksdpfx Aov Ap Iwel Soc 1 x stream delivery 1564

Condition: ready for operation (used), Pallet feeder PF Gkedpfxjyx Nltj Al Sec Touch screen Navigation with auto set plates rollers 4 plates 2 knives Side pocket heidelberg presser stacker delivery

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Plain text display Press force monitoring Wire straightening device Bosch stripping devices Mounting and brush motor with integrated tool W32/1-32 Soundproof cabinet Barrel for processing CU wire with stamped parts Control cabinet Technical data: Gkodeg T S Taepfx Al Sjc Drive power: 7.5 kW Speed (min. - max.): 40 - 250 rpm Press force / stamping unit: 200 kN Feed length: 250 mm Strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 2003, condition: excellent (used), Press-fitting device for ceramic pins in rotor shafts Operating principle: The ceramic pins are fed from a test station via a pneumatic hose using an oscillating feeder. At the test station, the position of any existing one-sided bore is checked using an optical sensor. Incorrectly positioned parts are conveyed to a collection container via a pneumatic slide. Correctly positioned pins are fed to the singulator of the press-fitting tool via another pneumatic hose. The actual press-fitting process is also carried out pneumatically using a roller bearing-guided plunger. Initially, a manually adjustable pressure p1 is used to control the process and ensure that the pin is not pressed too easily into the shaft. Then, a second, also manually adjustable pressure p2 is used to press the pin firmly into the rotor shaft. A disc spring package pre-tensioned with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted into, removed from, and clamped in the tool by an operator. This process is secured by a light curtain. Design Self-supporting station, integrated into a complete system, for press-fitting ceramic pins and balls. Rotor shafts Diameter: 5 - 20 mm Length: 50 - 200 mm Ceramic pin Diameter: 3 mm Length: 5 +/- 0.2 mm Operating cycle Output: 15 cycles per minute Safety Protective door with safety switch Light curtain, Category 4 Emergency stop Airborne noise emission Continuous sound pressure level at the workplace: 70 dB (A) Gedpfxjib H U Ds Al Sjkc Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse: 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year of manufacture: 2003 Electrically adjustable work table height Documentation and circuit diagrams are available. You can find other press-fitting devices – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), IN STOCK Gkedpsir E Risfx Al Ssc 2 x 1555 feeders

Condition: new, Year of construction: 2026, Feed unit with a consistent feed rate and no power loss Metal gearbox with hardened gears Metal cover for the feed rollers Right-hand and left-hand operation Powerful motor Durable PU feed rollers Tripod with extended outrigger arm as standard Individually adjustable for horizontal and vertical use With counter Gkjdpfocnxmzjx Al Ssc Model VSA 48 L Article no. 5115500 Technical data Max. outreach 1050 mm Number of feed rollers 4 Roller diameter 120 mm Roller width 60 mm Roller travel 25 mm Speed stages 8 Speeds 2/4/5.5/6.7/11/13/16.5/33 m/min Motor power 0.75 kW Connection 400 V / 50 Hz Weight 65 kg

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Godpfx Aou Nkxhsl Sokc Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min *

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. Gkjdpek Egrtsfx Al Soc *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm We are happy to offer you an optional 3D manipulator (mobile) for this device on

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm Gedpfjg Ailcox Al Sskc MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: new, Year of construction: 2027, functionality: fully functional, turning diameter: 51 mm, This machine is a new lathe. STANDARD EQUIPMENT Main spindle 15 KW, 4,000 RPM with Mitsubishi M830 control Gkjdpfxjug Up Ns Al Ssc with 4 cross slides on the main spindle with an 8-position servo turret VDI30x55 all stations can be used for rotary tools central milling drive 3.3 KW, 3000 RPM including stable multi-tool function (without tool holder) with full C-axis on the left spindle and on the sub-spindle with 48-position spindle locking as support for milling including sub-spindle with workpiece collection tray and finished part conveyor for falling cut-off parts or scrap pieces with swiveling finished part conveyor for finished part discharge after back-end machining 4 tool holders for the back end with programmable high-pressure coolant for cleaning clamping devices before the next workpiece is loaded with HD coolant pumps, 70 bar with separate coolant tank (300 liters) with handwheel coolant and hydraulic pumps bar feeder interface interface for Lico chip conveyor 1 set of slide base holders automatic lubrication system cutting force monitoring on all stations control cabinet with air conditioning unit 3-way signal lamp in addition, the machine is equipped with a turret for back-end machining. This turret is designed for solid tools only. BASIC MACHINE EQUIPMENT Interface for Lico/FMB bar feeder Programming support for Lico machines Color Door RAL 7015 Slate Gray Chip tray/frame RAL 7024 Graphite Gray Housing RAL 7035 Light Gray

Condition: excellent (used), Overview The MultiGraf 435SM is a robust, fully-automatic modular folding system — professionally refurbished and ready for immediate production. Designed for high-accuracy folding across a wide range of applications, this machine features four automatic folding plates and a precision suction feeder, delivering reliable results whether you’re producing high-volume leaflet work, cross-folded mail inserts, or specialist pharmaceutical folds. Thanks to its modular engineering, the 435SM can be expanded with cross-fold units, high-capacity feeders, miniature fold plates and vertical stackers — allowing the system to evolve as workflow demands increase. Fast setup via the Touchline digital control panel ensures efficient job changes, while the combination steel and rubber roller system provides clean, consistent folds even at high speeds of up to 25,000 sheets per hour. Ideal for commercial print rooms, mailing departments and finishing operations requiring flexible, high-quality, and upgradeable folding capability without the investment of a brand-new machine. Key Features Four fully automatic folding plates — wide range of fold configurations including complex pharmaceutical folds Precision suction feed system — consistent, mark-free handling across varying paper stocks High productivity — speeds up to 25,000 sheets/hour, ideal for short to medium run folding Touchline touchscreen control — quick setup, easy adjustment, and built-in batch counting 500-sheet feed table — stable, continuous feeding for longer production runs Combination steel and rubber rollers — accurate, uniform fold quality Modular upgrade path — compatible with cross-fold units, high-capacity feeders, miniature plates and more Paper size range A6 to A3+ — versatile handling for both small-format and large-format folding Optional scoring and perforating unit — for enhanced finishing capabilities Maximum paper size: Gkjdpjx Sya Iofx Al Sjc Standard: 375 × 500 mm With optional extension table: 375 × 650 mm Specifications Manufacturer Multigraf Model 435SM Min sheet size 90mm x 120mm Max sheet size 375mm x 500mm or 660mm with extension Paper weights 40gsm - 250gsm Feeder system Suction - bottom feed Speed Variable - up to 25,000 per hour Control panel Icon based touchscreen Electrical requirements 230v 50/60Hz Machine weight 174kg Machine dimensions (L)1535mm x (D)500mm x (H)1225mm

Condition: new, Year of construction: 2025, operating hours: 8 h, functionality: fully functional, conveyor belt width: 900 mm, conveyor belt length: 18,320 mm, discharge height: 8,320 mm, motor manufacturer: Caterpillar, Belt length / width: 18,320 / 900 mm Cat C1.7 engine: output 36 kW at 2,800 rpm Conveying capacity: approx. 400 t/h Discharge height: 8,320 mm at 22.5° incline Belt: hydraulically retractable and extendable Height adjustment: hydraulic Remote control: wired remote Gkodpfxsw Hccnj Al Sjc Crawler undercarriage length: 1,800 mm with 400 mm track plate

Condition: used, Year of construction: 2004, Offset 4 color Roland 904/8 Year: 2004 Number of impressions (mio): 178 Standard equipped Machine control - RCI - ColorPilot Feeder - Suction belts in feeder - Steel plate in feeder Printing units - Number of printing unit(s): 4 - Straight machine - PPL Semi Automatic Plate Change - Roland Deltamatic dampening - Automatic inking roller washing device - Automatic blanket washing device Godpfxevxqtme Al Sjkc - Dampening system: Technotrans Delivery - AirGlide - Powder spray - Schneider powder extraction Accessories - Compressed air compressor, excluded Max. output (s/h): 10.000 Max. sheet size (mm): 1300 x 1850 mm

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Gedpfx Aljwh Tq So Sokc Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: new, functionality: fully functional, A new log step feeder will be made to order based on your technical requirements. Gkjdpfxoyfmn Re Al Sjc

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm Gksdsu Nfttepfx Al Sjc passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: like new (used), Feeder for four-sided planer VANHOLD, 0.55 kW Gkodpfx Aleyq Hxms Sec

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SCC, warranty duration: 12 months, volume flow: 45 m³/h, screw conveyor length: 6,000 mm, type of input current: three-phase, screw diameter: 323 mm, input voltage: 400 V, rotational speed (max.): 240 rpm, rotational speed (min.): 140 rpm, Custom-manufactured to order. Send us your diameter, length, and installation angle — receive a full technical quote within 24 hours. INOTEK SCREW manufactures heavy-duty SCC-type cement screw conveyors for bulk material handling in cement plants, dry mortar facilities, fly ash transfer, lime and gypsum processing lines. Based in Ankara, Turkey, we have supplied equipment to over 40 countries with full export documentation and ISO 9001:2015 certified production. KEY SPECIFICATIONS: - Diameter: Ø114 / Ø168 / Ø219 / Ø273 / Ø323mm – any size made to order - Drive speed: 140 / 200 / 240 RPM - Motor power: 1.5 kW to 22 kW (IE2 efficiency class) — Siemens motors standard - Material: Carbon steel S235/S355 standard | AISI 304/316 stainless steel on request - Screw flights: cold-rolled, 3–10mm thickness - Orientation: horizontal, inclined (up to 45°), or vertical - Custom inlet/outlet: conical, square, or rectangular - Surface treatment: primer + epoxy topcoat standard | hot-dip galvanizing on request CAPACITY BY DIAMETER (approximate, horizontal, cement powder): - Ø114 mm → 4–8 m³/h - Ø168 mm → 10–18 m³/h - Ø219 mm → 20–30 m³/h - Ø273 mm → 30–40 m³/h - Ø323 mm → 40–55 m³/h Gkodpfxjyq H Iuo Al Sjc All values depend on RPM, inclination angle, and material bulk density. Custom diameters and capacities available on request. APPLICATIONS: Cement | Fly ash | Limestone powder | Dry mortar | Gypsum | Clay | Silo filling & emptying | Batching plants | Asphalt facilities WHY INOTEK: ✔ CE marked — compliant with EU Machinery Directive 2006/42/EC ✔ ISO 9001:2015 certified factory ✔ 12 months warranty — replacement parts shipped internationally ✔ Exported to 40+ countries – full documentation (packing list, EUR.1, certificate of origin, test reports) ✔ Trusted by: Coca-Cola | Unilever | Anadolu Efes | Limak Holding | OYAK | Cengiz İnşaat ✔ 20–35% more competitive than equivalent European pricing ✔ Production lead time: 3–5 weeks from drawing approval PRICING REFERENCE: Entry-level unit Ø114mm — from €1,500 EXW Ankara. All diameters, lengths, and configurations quoted within 24 hours. REQUEST A FREE QUOTE WITHIN 24 HOURS: Send us your required diameter, length, material type, and installation angle – we return a full technical offer and delivery schedule. Distributor and OEM partnerships welcome. Contact us to discuss exclusive regional agreements.

Condition: excellent (used), Discharge height: 3100 mm Feed height: 1870 mm Belt width: 590 mm Gksdpfoy D Dtcex Al Soc Cleat spacing: 250 mm Cleat height: 35 mm Total height: 3950 mm The machine is ready for operation Please check my other listings.