Used Zpl 255 Tandem Trailer, 10 Tons, Drive-Through, 7.20 M for sale (95,839)

Year of construction: 2019, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, operational hours counter: 2169h, with Deduster MHG 1703-2,2 and various accessories. Lasdpfelubvbox Amnoa

Condition: ready for operation (used), Parker / Compumotor SX83-135 Microstep Drive SN:93090100026, used, normal signs of use, 100% functional, scope of delivery as per photos Lsdpfx Amjtvct Usnjaa

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor covering approx. 30 mm thick Loading area: Lodpfxsw Tpqws Amnoaa - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section - Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN) - 5 pairs of flip-out lashing rings (LC 5,000 daN) - 3 pairs of flip-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) One-piece Steel Ramps: - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice - TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: - Steel structure made of high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations - Lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted with blasting wheel machine after welding - Second shot-blasting using corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection - Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL - Rims in silver - Rear section metallized and in RAL 9010 (continuation see ori

Condition: new, maximum load weight: 40,790 kg, overall weight: 59,000 kg, axle configuration: 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and soon-available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Low bed: - Low bed with external beams, extendable design, SUPER LOW version, approx. 7,550 mm long - Low bed with fixed hardwood flooring, approx. 40 mm thick, and mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current bed length - 7 pairs of lashing rings, foldable outward (approx. LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolt-on RUD rings Rear running gear: - Rear running gear with closed outer frame, checker plate floor and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable outward (approx. LC 10,000 daN) - 1 pair of flat lashing rings in the trough (approx. LC 10,000 daN) - 2 pairs of flat lashing rings in the trough (approx. LC 16,000 daN) - 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE, all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and lock pins to secure in raised position - Final coating of axles with 2 coats of 2-component paint, single color in grey 34-0260 - Technical axle load: 12,000 kg each - Hydraulic axle compensation - Axle tools Tyres: - Tyres 245/70 R 17.5 3PMSF – brand of our choice. Load index (146/146F) Braking system: - Braking system according to EU regulations with EBS-E (2S2M) without interconnected lines to the tractor unit Electrical system: - Electrical system according to EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15 pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with a wheel blasting machine after welding - Second abrasive blasting with corundum for optimal adhesion of the coating system - Final coating with 2 layers of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL - Rear section metallized and painted in RAL 9010 (pure white) - Rims in silver-grey - No metallic paintwork possible - Paint structure tested in salt spray test according to ISO 9227-NSS Ledpfsw Tprbsx Amnoaa - Sealing of cavities with special wax Accessories included: - Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the outer beams - Without container locks - 3.5-inch king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel carrier in front of the front wall - At the galvanized front connection bar, yellow-red air couplings - Remote steering from front and rear via cable remote control with push buttons, with single-track monitoring of axles (without installation in the tractor unit) - Electro-hydraulic unit - On the gooseneck, plug-in aluminium side and rear walls, approx. 2,000 x 400 mm (L x H)

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high Laedjw Tpq Djpfx Amnsa - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full specification available on request. Loading area: * Extendable loading platform with pneumatically operated locking mechanism * Loading area with approx. 30 mm thick wooden planks * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tension straps (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres: 385/65 R 22.5, manufacturer at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the truck is via the standardized EBS interface as per ISO 11992. For proper display, the truck must be capable of receiving and showing this data. Axle: * BPW axles and suspension * All axles hydromechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (offset 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system in accordance with EU regulations, EBS-E (2S2M) without connection lines to the tractor unit Steel construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with indicators * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal coating adhesion * Final painting with two coats of 2-component topcoat, single color, RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, with axle tracking monitoring (without installation in the tractor unit) * Electro-hydraulic unit * 4 wheel chocks with holders on the front wall * 2" kingpin * Yellow-red air couplings at the galvanized front connection bar * At gooseneck and rear, left and right, brackets for warning panels, including sockets * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the external frame of the loading platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking position is provided in the extension for a 45' container * 4 pairs of transverse stake pocket strips in the loading area for approx. 100 x 50 mm plug-in stakes * Storage for max. 9 pairs of plug-in stakes bolted inside to the front wall * Boarding ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted front left under the loading platform Laedpfjw Tpr Iex Amnoa * An additional INOX toolbox, approx. 1,200 x 46...

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks Lsdpexf Siljfx Amnoaa - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Lodpfxjw Tprzj Amnsaa Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: new, maximum load weight: 37,680 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the equipment features. Complete specification available on request. Gooseneck * With approximately 30 mm thick hardwood flooring. Gooseneck with straight rear section * 3 pairs of lashing rings (LC 5,000 daN) Loading Area * Extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, treadplate covering above the axles Landing Gear * JOST mechanical landing gear with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Tyres Lasdpfx Asv Etx Eemnea * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality two-component (2K) top coat, single colour RAL 3002 carmine red * Rims in silver Accessories Included * 2" king pin * Galvanised steel front wall, approx. 400 mm high * Yellow-red air couplings on galvanised front connection strip * 4 chocks with holder on the front wall * Spare wheel holder in front of the front wall * Electro-hydraulic unit * Steering from the front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit) * European reflective signs (red-yellow) at the rear of the trailer * Yellow reflective tape according to EU regulations on sides, extensions, and rear of the trailer * Bracket for warning signs including socket, left and right on the gooseneck and rear plate * Bracket for rotating beacon at the rear of the trailer * Galvanised foldable support legs under the loading area's chamfer * Load gauge for determining axle loads including load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the loading area, 1x 40' container over the gooseneck, or 2x 20' containers * Support block with 1 pair of WADER container pockets, fifth wheel load approx. 20,000 kg * 7 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the loading area * Galvanised, extendable width extensions, approx. 230 mm per side * Sliding hook-in rails for aluminium loading ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the loading area (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic reversing warning signal * HRM Metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer Ledpfx Amju Sd U Ujnoaa * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area Laodpfx Aexttc Aemnja * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: used, empty load weight: 860 kg, maximum load weight: 1,840 kg, overall weight: 2,700 kg, first registration: 11/2015, loading space length: 4,000 mm, loading space width: 2,150 mm, loading space height: 2,000 mm, wheelbase: 3,005 mm, gearing type: other, driver cabin: other, * German trailer * From first owner * Condition as shown in photos * Enclosed car transport trailer * Trailer approved for speeds up to 100 km/h * The trailer is made by the premium manufacturer BLYSS * Model: Pionier 2,700 kg * Ideal for transporting vehicles such as cars, motorcycles, or construction machinery * Light-transmitting tarpaulin roof * Aluminium loading ramps * Sliding loading ramps * Adjustable loading ramps * 4 wheel chocks * Loading dimensions: Length = 4,000 mm, Width = 2,150 mm, Height = 2,050 mm * Overrun brake * AL-KO axles * 13" wheels * Lashing rails on left and right * Wheelbase: 3,005 mm x 850 mm * Permissible gross weight: 2,700 kg * Curb weight: 860 kg * Payload: 1,840 kg Should you require a new TÜV inspection, we will be happy to provide an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV inspection, new SP, or new UVV. You can find more commercial vehicles on our homepage at We speak the following languages: German, English, Polish, Turkish Note: Lasdjt Su Rljpfx Amnja We offer and strongly recommend an on-site inspection and assessment of the item, to ensure there are no misunderstandings regarding its condition and suitability. Inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect information in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: ready for operation (used), functionality: fully functional, empty load weight: 2,050 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 01/2009, loading space length: 7,250 mm, suspension: air, tire size: 235/75/17.5, tire condition: 90 %, wheelbase: 990 mm, color: grey, trailer brake: trailer braked, Year of construction: 2009, Equipment: ABS, Obermaier trailer for BDF swap bodies, 40 mm towing eye, height-adjustable drawbar, 90% tires, spare wheel, front and rear supports, German trailer from first owner. Sale only to commercial buyers and under exclusion of any warranty. Ledsx Hanzjpfx Amnoaa Loading possible.

Condition: used, maximum load weight: 11,000 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 04/2013, loading space length: 5,000 mm, Ref. No.: B - 08 On behalf of customer Obermeier * ECO Tip 100 * Three-way tipper * 2-axle * Wide tyres * Adjustable drawbar * Permissible total weight 11,000 kg * Good condition Trade-in possible Financing from 3.99% Ljdpfxexvf U Aj Amnsaa Subject to errors and prior sale! The information in this ad is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability for typing or data transmission errors. Listed features are to be checked separately. All details in the listings are non-binding! Delivery throughout Germany upon request Opening hours: Monday to Thursday from 9:00 to 17:00, Friday from 9:00 to 14:00, and by appointment!

Condition: new, empty load weight: 7,894 kg, axle configuration: 3 axles, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, truck registration, | Walking floor | Knapen K200/KT01 | Radio remote control | 10 mm floor | Rolling tarp, floor protection sheet, standing platform | SAF axles with disc brakes | Aluminium rims | 1st axle lift | Toolbox | Spare wheel holder | Unladen weight: 7,894 kg | Subject to errors, input mistakes, and prior sale. Laedpfxsx Higts Amnja

Condition: used, mileage: 363,000 km, power: 375 kW (509.86 HP), first registration: 03/2012, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro5, loading space length: 4,100 mm, loading space width: 2,490 mm, loading space height: 1,400 mm, Equipment: crane, soot filter, Crane: Ljdpowlyuxefx Amnsaa ----- Retarder- Air conditioning- Semi-trailer with removable flatbed- Effer 255-5 with radio- Top condition- Suspension: Leaf-air

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: SEAS5050121038350, input voltage: 400 V, total length: 4,000 mm, total width: 4,000 mm, total height: 1,400 mm, compressed air connection: 6.9 bar, type of input current: three-phase, overall weight: 1,565 kg, Automatic screen printing machine M&R Sportsman “E” in very good working condition, manufactured in the USA and known worldwide for its reliability and consistent print quality. The machine is designed for professional textile production and is ideal for medium to high-volume orders. It operates on 400V, 3-phase, 50/60 Hz and requires 100 PSI compressed air. Maximum image size is 50 x 50 cm with a maximum frame size of 66 x 91 cm. The total machine diameter is approximately 3.6 meters. The construction is robust and built for long-term industrial use, offering smooth operation, precise registration, and easy maintenance. Compatible with flash cure units and conveyor dryers. The machine has been maintained and is ready for immediate production. It is currently dismantled and prepared for shipping. Inspection is possible by prior arrangement. Lsdpfx Amoyvkzwonoaa

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain -Chain length: 10 m -Pitch: 200 mm -Intermediate dimension: 48 mm Lodped Tih Refx Amnjaa -Dimensions 1200/1000/100 mm -Weight: 176.5 kg

Condition: used, mileage: 221,291 km, Year of construction: 2009, operating hours: 15,356 h, Drivetrain Drive: Wheel Weights Empty weight: 22.000 kg Functional Lifting capacity: 30.000 kg Identification Serial number: 86584 Other information Lasdpjwwqbysfx Amnsa Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 8.3x2.4x3.45 Additional information Please contact PFEIFER GROUP for more information

Condition: used, axle configuration: 3 axles, first registration: 11/2016, total length: 14,040 mm, total width: 2,600 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,760 mm, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - Refrigeration/deep-freeze unit - Air suspension - Disc brakes = Further information = Axle configuration Tire size: 385/65 R 22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Laedpoyz A Exsfx Amnoa Rear axle 1: left tire tread: 40%; right tire tread: 40% Rear axle 2: left tire tread: 30%; right tire tread: 30% Rear axle 3: left tire tread: 50%; right tire tread: 50% Weights Unladen weight: 8,850 kg Payload: 33,150 kg Gross vehicle weight: 42,000 kg Functionality Loading platform height: 115 cm Refrigeration unit engine: Diesel and electric (8,798 operating hours diesel; 494 electric) Condition Damages: none Identification Registration number: OP-20-LV

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,600 kg, permissible axle load (axle 2): 11,600 kg, permissible axle load (axle 3): 11,600 kg, first registration: 03/2007, loading space length: 13,230 mm, loading space width: 2,520 mm, loading space height: 2,600 mm, total length: 13,230 mm, total width: 2,520 mm, total height: 2,600 mm, suspension: air, tire size: 275/70-R22.5, wheelbase: 7,970 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional Options and Equipment = - BPW axles - EBS - Air suspension - Spare wheel - Drum brakes - Central lubrication system Lasdpfxsxuu Aas Amnea = Remarks = Attractive 2007 NOOTEBOOM OVB-73-04, 4-axle ballast trailer. Axles 2, 3, and 4 are hydraulically steered (incl. wired remote control), BPW axles with drum brakes, 2 x 10 stake pockets + 13 stakes, 2 x 5 lashing rings, central lubrication, 3" kingpin, air suspension. Unladen weight: 11,620 kg, gross vehicle weight: 71,400 kg. Twin tires with 275/70 -R22.5 tyres (L: 10/13, 13/13, 14/14, 7/7 mm; R: 10/7, 14/14, 13/12, 11/12 mm), Belgian registration with valid technical inspection until 25.03.2026. = Additional Information = Axle configuration Tyre size: 275/70-R22.5 Axle make: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 11,600 kg; Tyre tread depth left inside: 65%; left outside: 80%; right inside: 65%; right outside: 45% Rear axle 2: Dual tires; Max. axle load: 11,600 kg; Steered; Tyre tread depth left inside: 80%; left outside: 80%; right inside: 90%; right outside: 90% Rear axle 3: Dual tires; Max. axle load: 11,600 kg; Steered; Tyre tread depth left inside: 90%; left outside: 90%; right inside: 75%; right outside: 80% Rear axle 4: Dual tires; Max. axle load: 11,600 kg; Steered; Tyre tread depth left inside: 45%; left outside: 45%; right inside: 70%; right outside: 75% Weights Unladen weight: 11,620 kg Payload: 59,780 kg Gross vehicle weight: 71,400 kg Condition Technical condition: very good Visual condition: average Further information Please contact Arne Honingh for more details.

Year of construction: 2019, condition: good (used), Weiss Model: WK 10/40-80 Test chamber volume approx. 10 m³ 10 m³ = 10,000 liters Modular climate test chamber Weiss WK 10/40-80 Version: water-cooled refrigeration unit Refrigerant type: R449A Special equipment for battery testing: The climate test chamber is equipped with extended safety features for battery and accumulator testing (e.g. lithium-ion): • Pressure relief flap for controlled pressure release in the event of a malfunction • Gas warning device for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery testing and supports use in development and testing environments (subject to a customer-provided safety concept / BMS). Description: For sale is a professional climate test chamber from Weiss Technik, model WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate testing and is ideally suited for industry, research, development, and quality assurance. The system allows for temperature and humidity testing across a wide range and is designed for continuous operation in industrial and development laboratories. Particularly suitable for: - Functional and service life testing - Material and component testing - Pre-aging and climate simulation - Conditioning of samples - Testing of batteries and accumulators (e.g. lithium-ion) under defined climate conditions (subject to customer safety concept / BMS) Operation is via a modern S!MPAC® control system with web panel, programs can be stored and automated. The system was in operation until recently and is fully functional. General information: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE marking: available Made in Germany Control system: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Laedoyyu Rqspfx Amnoa Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10 % to 95 % RH Humidity accuracy: ± 5 % Dimensions: External dimensions (W×D×H): approx. 3,300 × 5,000 × 2,500 mm Internal dimensions (W×D×H): approx. 3,000 × 2,200 × 1,500 mm Test chamber volume approx. 10 m³ Media & Systems: Spray system: water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical data: Mains connection: 3/N/PE, 400 V AC ±10 %, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Climate test chamber Weiss Technik WK 10/40-80 Control / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see image) (Change and errors in technical details and specifications excepted!) For further questions, please feel free to contact us by phone.

Condition: used, empty load weight: 4,430 kg, maximum load weight: 13,570 kg, overall weight: 18,000 kg, axle configuration: > 3 axles, first registration: 09/2016, loading space length: 5,000 mm, loading space width: 2,440 mm, loading space height: 900 mm, loading space volume: 10 m³, total length: 5,000 mm, suspension: air, wheelbase: 1,310 mm, color: red, Year of construction: 2016, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40577 Schwarzmüller, 3-way tipper * Year of manufacture: 2016 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Tandem trailer * Air connection coupling head (red + yellow) * 15-pin connection plug * Lifting and lowering device * Swing tailgate * Suspension: Air * Gross weight: 18,000 kg * Unladen weight: 4,430 kg * Payload: 13,570 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Wheelbase: 1,310 mm * Internal dimensions: L=5,000 mm, W=2,440 mm, H=900 mm * Internal volume: 11 m³ * Pallet spaces: 12 * Additional photos can be sent on request Liability disclaimer: Specifications subject to change, prior sale, and errors excepted. Lasdpfx Amoyicldsnsa More photos and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing options * Handling of all (export) documentation * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Feel free to contact our qualified staff—we are happy to advise you.

Condition: used, empty load weight: 4,150 kg, maximum load weight: 13,850 kg, overall weight: 18,000 kg, axle configuration: > 3 axles, first registration: 08/2018, next inspection (TÜV): 09/2026, loading space length: 5,000 mm, loading space width: 2,440 mm, loading space height: 900 mm, loading space volume: 10 m³, total length: 5,000 mm, suspension: air, wheelbase: 1,310 mm, color: red, Year of construction: 2018, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40575 Schwarzmueller, 3-way tipper trailer * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Air suspension * Tandem axle trailer * Air supply coupling heads (red + yellow) * 15-pin connector plug * Lifting and lowering device * Swing tailgate * Next inspections (MOT / Emissions): 09/2026 * Suspension type: air * Gross vehicle weight: 18,000 kg * Unladen weight: 4,150 kg * Payload: 13,850 kg * Permissible gross weight: 18,000 kg * Axle manufacturer: BPW Lajdpfx Aeyicv Nsmnea * Wheelbase: 1,310 mm * Internal dimensions: L=5,000 mm, W=2,440 mm, H=900 mm * Internal volume*: 11 m³ * Pallet spaces: 12 * Further photos available on request Disclaimer: Subject to prior sale, changes, and errors. More photos and videos can be found on our website. Our comprehensive services include, for example: * Purchase/Sale/Rental of commercial vehicles * Fast, straightforward financing options * Handling of all (export) documentation * Arrangement of export license plates / customs plates * Vehicle refurbishment: new tarpaulins, lettering, paintwork, etc. * Professional loading and load securing * TÜV inspections, registration service * Transportation of commercial vehicles Consult our trained specialists – we are happy to advise you.

Condition: used, We are offering a used drive-through floor scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Weighing surface dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Weight: 235 kg Condition: used PRICES Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACT PERSONS AT OUR COMPANY: Tanja Henkelmann Rainer Nürenberg Oliver Kopp PAYMENT TERMS Payment conditions are to be agreed in case of order. The price is per unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, steel mezzanine floors, textile warehouses, as well as machinery for commerce, industry, and trades. Lodpsy Ep Thofx Amneaa We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.