Used Bartscher Fördertechnik 1500 Kg for sale (66,544)

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Ncsdpfx Ajvtpq Hodtsr Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: new, *IMMEDIATELY AVAILABLE* Act now! We're clearing out our new location! There are unique exhibition pieces available at absolute rock-bottom prices! Steel sheet sandwich construction, 30mm walls, side door, sloped front, 2 lashing rails, 4 lashing eyes Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 1,500 kg • Unladen weight: approx. 555 kg • Payload: approx. 945 kg • Internal dimensions: 305 x 152 x 193 cm (L x W x H) • Total external dimensions: 454 x 203 x 257 cm (L x W x H) • Loading edge height: approx. 59 cm • Brakes: Yes Nedpfxsyivb Uo Adtscr • Jockey wheel: Yes • 100 km/h approval: optional (surcharge) • Incl. vehicle documents Body Construction: • Floor: wooden, Finnish multiplex board • Walls: 30mm steel sheet sandwich • Roof material: 25mm GRP sandwich • Chassis: ALKO rubber torsion axle • Number of lashing eyes: 4 pcs (750 kg/daN) • Rear door: No • Rear ramp: Yes • Rear ramp material: aluminum • Rear ramp/door function: rotary bar lock • Interior light: optional (surcharge) • Prop stands: optional (surcharge) • Overrun device & brake: Yes • Frame/chassis: V-drawbar, hot-dip galvanized • Lighting connector: 13-pin • Approval: COC papers Standard Equipment: • Robust V-drawbar, hot-dip galvanized • Tandem axle • Overrun coupling by ALKO • Floor panel in Finnish multiplex • Side walls in solid 30 mm steel sheet sandwich • Roof in 25 mm GRP sandwich • Aluminum loading ramp, reinforced version • Stainless steel rotary bar lock and galvanized hinges • Rear frame and finishing profiles in special aluminum profiles • 4 lashing points in the floor, 750 kg tensile force per lashing point • Lashing rails preinstalled on both sides of the trailer • Automatic jockey wheel • Reversing automatic brake • Plastic fenders • 13-pin plug • Reversing light • Large, safety-certified lighting • Integrated rear fog light • Body: splash-proof • Documentation: COC papers Extras included in the price: • Side door lockable from inside and outside • Roof sloped at front for fuel savings • Aluminum loading ramp at rear Optional accessories (retrofit possible – please inquire): • Anti-theft device • Rear support legs • 100 km/h approval with shock absorbers • Additional side door • Motorcycle wheel chocks • Motorcycle stand rails • Motorcycle tie-down straps • Additional lashing straps • Additional lashing eyes • Additional perforated rails for tension belts & cargo bars • Bar rail with rubber coating for tension belts & cargo bars • Cargo bars in steel or aluminum • Interior lights • Reversing lights • Many more options New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - Vehicle registration documents can be sent in advance or transit plates (Germany) can be provided - Export plates including customs declaration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! For over 30 years we have been a specialist dealer and workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, technical changes, and prior sale -

Condition: good (used), functionality: fully functional, For sale is a copy milling machine from Makre Franz Kuhlmann KG, GM 1/2 series. The machine is fully functional and ready for immediate use. Nsdpfswal Dhex Adtscr Technical specifications: X-axis (longitudinal travel): 330 mm Y-axis (transverse travel): 200 mm Z-axis (vertical travel): 280 mm Template table: 500 x 400 mm Spindle speeds: 4,200 – 20,000 rpm Spindle mount: Collet bores up to 8 mm possible Motor power: 0.5 kW Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) Weight: 430 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to help you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Condition: used, Machine: screw conveyor, screw conveyor, hollow screw conveyor Length: 8.10 m Ncsdpforn T Urex Adter Ø screw: 500 mm Manufacturer: IEM Fördertechnik Type: Solid body screw conveyor, supported on both sides, without motor

Condition: new, Year of construction: 2026, Pressure blast cabinet for internal pipe blasting with turntable and manual blasting operation - Filter system Njdpfx Aoyn Inwsdtocr - Turntable with prism for pipe support placement - Driven internal pipe lance - Program storage: travel path, feed rate, blow-off function - External blasting nozzle with oscillation (option)

Condition: new, Year of construction: 2026, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. Ncsdpfxedrtanj Adtor The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. Njdeynz Idjpfx Adtjcr - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period.

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar Nsdeyga Utjpfx Adtjcr • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Nedpovcqy Usfx Adtecr Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: excellent (used), For sale: Electric chain hoist from the renowned manufacturer Yale, model CPVF 10-8 NE. The device is in very good technical condition and is equipped with a Magnetek radio remote control system (transmitter + receiver). Technical data: • Model: CPVF 10-8 NE Ncsdpfx Adjyrh I Estjr • Lifting capacity: 1000 kg • Year of manufacture: 2019 • Power supply: 400V / 3-phase • Lifting speed: 2 / 8 m/min • Control: radio remote control • Condition: very good, normal signs of use

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Comprising: - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Njdpfx Adsynr E Totjcr Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, Year of construction: 2026, Pressure blasting pot, 140L, mobile for construction site or stationary use. Fittings securely mounted under the handle. Very well suited for tough construction site applications. Includes: Njdpfx Adoynr E Hotscr - 140L pressure vessel - Pre-filter - Weather protection cover - Water separator - Pressure regulator - Adjustment for conveying air (tank air volume and blast hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety features: - Dead man’s switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with drum and lid as attachment for multi-hour blasting without refilling - etc. Made in Germany

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Ncsdpjynr Emofx Adtjr Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: good (used), Year of construction: 2014, Manufacturer: DEMAG Load capacity: 860 kg + 630 kg (equipped with two cranes) Ncedpfx Aoyu R Dzsdter Exact technical dimensions are shown in the pictures. The crane runway can be extended using the structures and supports shown in the pictures; however, additional track elements are required for the extension, which are not available!!

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 690 mm, total length: 3,800 mm, power: 0.37 kW (0.50 HP), Roller Conveyor / Conveyor Technology / Rollers Manufacturer: AMI Fördertechnik Year of manufacture: 2013 Condition: Used Drive type: Flat belt Total length: approx. 3,800 mm Total width incl. motor: approx. 850 mm Total width without motor: approx. 690 mm Conveying width: approx. 600 mm Roller/axle spacing: approx. 65 mm Roller diameter: approx. 50 mm Frame made of steel Frame height: approx. 120 mm Frame width: approx. 40 mm Includes 2 SEW motors (0.37 KW each) Stock quantity: 2 units Price per meter Ncjdpjyhdmpsfx Adtjr Internal article number: 2026020501 Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Custom solutions for your intralogistics Whether it’s roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and outstanding network of specialists. We have already successfully implemented projects for companies in various sectors, including logistics, the pharmaceutical industry, trade, and electronics. Together, we will develop solutions to optimize your processes and material flow cost-effectively and sustainably. We can also provide fully automated sorting technology and supplementary components such as picking racks or containers.

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Nodpfxoyz Af Es Adtjcr Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: like new (used), functionality: not functional, load capacity: 6,500 kg, Load capacity 6500 kg Please note: Arm diameter adjustable from 1880 mm to 4550 mm (swivel-out) Space-saving and continuously adjustable, the extension arms can be locked in place Speed continuously adjustable from 0.001 to 5 rpm Motor power 3 kW Torque 15000 Nm Height 800 mm Nedpex Thucefx Adtscr Maximum current transmission 2000 A Weight 4700 kg with hand and double-foot remote control CE certificate, declaration of conformity, documentation, circuit diagram with original 2016 quotation invoice Current new price approx. €28,000

Condition: used, Year of construction: 2016, functionality: fully functional, roll diameter: 50 mm, roll width: 410 mm, total length: 144,000 mm, axle spacing: 125 mm, frame height: 120 mm, Roller Conveyor / Conveyor Line / Driven Rollers Year of manufacture: 2016 Manufacturer: AMI Fördertechnik Model/Type: Flat belt Condition: Used Total length: Approx. 144 meters Overall width incl. motor: Approx. 490 mm Conveying width: Approx. 410 mm Roller diameter: Approx. 50 mm Axle spacing: Approx. 125 mm Colour: Light grey Frame height: Approx. 120 mm Frame width: Approx. 35 mm Drive type: SEW motor – flat belt drive Stock quantity: Approx. 144 meters Price per meter The conveyor system was operational until disassembly. Nodoxyatzepfx Adtscr Internal item number: 2025112004 Due to the excellent workmanship of the conveyor system, your material glides smoothly to its destination even under heavy load. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods – we are your dependable partner! We are happy to provide you with a customised offer or advise you on design and installation queries. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our extensive network of specialists. We have successfully delivered projects for companies in numerous industries, such as logistics, pharmaceuticals, manufacturing, and electronics. Together, we will develop ways to optimise your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting technology or supplementary components such as picking racks or containers. Features: Condition: Fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst)

Condition: good (used), Year of construction: 2016, functionality: fully functional, conveyor belt length: 2,530 mm, conveyor belt width: 690 mm, Belt Conveyor / Conveyor Belt / Belt Band Color: Light grey Manufacturer: AMI Fördertechnik Condition: Used Model: Belt Belt Type: Longitudinal Grooves Year of Manufacture: 2016 Total Length: approx. 2,530 mm Nedpfxsyglvij Adtocr Total Width incl. Motor: approx. 770 mm Total Width without Motor: approx. 690 mm Belt Width: approx. 600 mm Frame made of metal Frame Height: approx. 80 mm Includes SEW Motor (0.37 kW) Stock: 8 units Price per unit Features: Condition: Fully operational, with signs of use Ideal for fast material conveying Professionally dismantled and packaged Internal article number: 2026020201 Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until disassembly. Thanks to the excellent design of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a custom quote or support you with design or installation inquiries. Simply let us know your requirements and on-site conditions. Benefit from our many years of experience and extensive network of industry professionals. We have successfully delivered projects for companies across diverse sectors such as logistics, the pharmaceutical industry, skilled trades, and electronics. Together, we will develop cost-effective and sustainable solutions to optimize your processes and material flow. We can also offer fully automated sorting technology or supplementary components, such as picking racks or bins.

Condition: used, Year of construction: 1984, load capacity: 3,200 kg, Currently, 3 units in stock. Ncsdpfsw Ugu Aex Adtsr Single-girder semi-gantry crane Manufacturer: Christmann & Pfeifer KG Hoist: Demag Design size: PLV 168 NF Load capacity: 3,200 kg Travel unit: Demag Type: 13/6PF 12/4 Usable hook travel: 4,800 mm Rail gauge (center-to-center): 8,110 mm Weight: approx. 2 t/unit Price quoted per unit, free loaded. The cranes have already been dismantled and are packaged ready for transport. The machine can be inspected on site. All information is provided without guarantee. Interim sale reserved.

Condition: new, empty load weight: 450 kg, maximum load weight: 1,050 kg, overall weight: 1,500 kg, loading space length: 3,050 mm, loading space width: 1,600 mm, tire size: 195/50R13C, Extremely stable single-axle flatbed high loader from trailer manufacturer HAPERT model AZURE H-1 1500kg 305x160 with 13" tires. Thanks to its fold-down drop sides, a flatbed can be used very universally. Pallets can be loaded very easily from the side or from the rear. All flaps and corner stanchions can be removed, so the high loader quickly becomes a pure platform. All Hapert overloaders have a wide range of standard equipment such as sturdy aluminium side panels, eccentric locks, lashing eyes, net hooks on hinged lower sections, automatic support wheel, extremely stable welded and hot-dip galvanized steel frame and reinforced and bolted V-drawbar. Technical data can be found below. We also offer optional trailer accessories for Hapert car trailers such as 40cm drop sides, lattice extension, drop side extension, total weight up to 1800kg, ramps, rear support set, 100km/h approval, tool box, lashing straps and trailer lock. Ncodpfxsq Nfxhs Adter

Condition: new, * IMMEDIATE AVAILABILITY * Including hydraulically lowerable loading platform / manual hydraulics / braked Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: AVAILABLE IMMEDIATELY! • Permissible total weight: 1,500 kg • Unladen weight: approx. 445 kg • Payload: approx. 1,055 kg • Internal dimensions: 302 x 172 x 10 cm (L x W x H) • Overall external dimensions: 464 x 238 x 70 cm (L x W x H) • Loading edge height: approx. 48 cm • Tyres: 165R13C steel rims • Brakes: Yes • Jockey wheel: Yes, 45 mm with clamp bracket • 100 km/h approval: at extra cost • Including vehicle documentation Standard Equipment: • Multiplex wooden floor – extremely robust • Fixed 10 mm side panels • Corner posts at all corners for e.g. tarpaulin frame • Very stable welded steel chassis • Entire frame hot-dip galvanized by immersion bath • Multiple sturdy cross members for high point load capacity • Loading platform hydraulically lowerable • Mechanical safety lock for pivot axle during travel • With rear drive-on wedge • Additional continuous longitudinal struts welded in • Front storage box • 8 lashing rings within the loading area • Rear number plate holder, can be swung away for loading • AL-KO overrun brake system and parking brake • Coupling head AL-KO • Very stable reinforced V-drawbar • Automatic reversing function • 13-pin plug • Reversing lights • Large dimensioned safety lighting • Integrated rear fog light Ncjdpsydravjfx Adter • Lighting recessed in the rear frame • Centrally positioned jockey wheel with clamp bracket • Registration documents: COC papers Optional Accessories – Feel free to inquire: • 100 km/h speed approval with shock absorbers • Anti-theft device • Spare wheel • High tarpaulin • Additional lashing eyes • Reversing lights • Lashing straps • and much more Brand new vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - All prices include VAT. - Vehicle title can be sent in advance or temporary registration (Germany) can be provided. - Export registration including customs declaration available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been certified dealers and repair workshop for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to error, alteration and prior sale -

Condition: used, Year of construction: 2000, machine/vehicle number: P18096N, functionality: fully functional, pressing force: 20 t, stroke length: 160 mm, total height: 2,150 mm, overall weight: 180 kg, Good day, We hereby offer you, without obligation, a used workshop press from Rodcraft, model WP 20F. Manufacturer: Rodcraft Pneumatic Tools GmbH & Co. KG Model: WP 20 F Year of manufacture: 2000 Machine No.: P18096N Hydraulic stroke: 160 mm Pressing force: 20 t Machine dimensions: 2150 x 960 x 660 mm Transport dimensions: 2150 x 980 x 750 mm Machine weight: 180 kg Ncedpfx Aeygm N Dodtor Note: The above technical data has been taken from the manufacturer’s brochures or other sources, for which we cannot guarantee the accuracy or completeness. Scope of delivery: 1 unit used workshop press Rodcraft, type WP 20F Application area and condition: The machine was occasionally used in an industrial metalworking shop for pressing out bearings, etc. The machine is fully functional and in good condition. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: new, * AVAILABLE IMMEDIATELY * Including side door, window, sloped front, 2 lashing rails, 6 lashing rings Technical Specifications: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: None • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height (floor): 59 cm • Permitted total weight: 1,500 kg • Unladen weight: 720 kg • Payload: 780 kg • Chassis: Low loader (wheels positioned beside the body) • Tyres: 185R14C • Suspension: ALKO rubber spring axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofit possible DESCRIPTION • Reinforced stable bolted V-drawbar • Very robust aluminium frame • Frame is highly torsion-resistant due to its solid construction • Floor plate made of Finnish multiplex • Numerous cross members for high point load capacity • Superstructure made of very strong insulated steel sheet sandwich, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of 25mm GRP sandwich • Aerodynamic sloped front wall • Double-wing rear door with stainless steel rod lock, lockable • 2x maneuvering handles at the front • Doors with special sealing profiles, made of hard/soft plastic • Side door standard right front, with three-bolt security lock, lockable from inside and outside • Rear frame made of hot-dip galvanized steel, solid welded • 6 lashing brackets recessed in the floor (750DaN/kg) • Slotted lashing rails mounted on both sides, height=90cm • 100 mm all-round interior impact protection • Maintenance-free ALKO rubber spring axles • Automatic reverse • ALKO overrun brake system and parking brake • Plastic mudguards • 13-pin plug • Reversing lights • Large dimensioned safety lighting • Integrated rear fog light • Lighting recessed into the rear frame • Central automatic jockey wheel Optional Accessories - please inquire: • Anti-theft device • Rear supports • 100 km/h approval with shock absorbers • Side door • Motorcycle wheel chocks • Motorcycle stand rails • Motorcycle tie-down straps • Ratchet straps • Additional lashing rings • Additional slotted rails for webbing & load bars • Rod rails with rubber coating for webbing & load bars • Load bars made of steel or aluminium • Interior lighting • Reversing lights • and much more New vehicle with warranty and TÜV. - Financing or leasing possible - Nationwide delivery available - Vehicle documents can be sent in advance or temporary registration (Germany) can be provided - Export plates including customs declaration available Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately! Ncsdpfx Adoycxuqetsr We have been specialized dealers & repair workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands - Subject to errors, omissions, and prior sale -

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm Ncjdpjyt Nm Ssfx Adtor H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit