Used machining centers (vertical) X-axis travel 400-599mm for sale (234)

Condition: used, Hurco VMX 60 U 5 axes Vertical Machining Centre, new 2014. Lhedpfx Ahs Aay Ucs Son

Condition: excellent (used), Year of construction: 2018, 2018 Fanuc Robodrill D21MIB5 Twin Robot Machining Cell with (2) Fanuc Series 31I-Model B5 CNC Controls Lhodpfx Ahez E Sbre Sjn Cell Comprising: Twin Fanuc Robodrill Type A04B-0104-B181 Vertical Milling & Drilling Machining Centres (S/Nos. P186ZG729 & P186ZG731). Table Size Approx 650mm x 400mm. Travel: 'X' Approx 500mm, 'Y' Approx 400mm, 'Z' Approx 330mm. Max Table Load 300kg. Number of Tool Pockets 21. Max Tool Length 250mm, Max Tool Weight 3kg. BT30 Spindle Taper. Max Spindle Speeds 10,000 RPM. Nikken TAT-170N (2018) Pneumatically Operated Rotary Support Table with 4th Axis Fanuc DDRiB-104-B181STD. ABB Flexloader SC3000XL Extended Conveyor Loading System (S/No. M180057-1) with Fanuc ABB 6 Axis Robot IRB 4600 & Fanuc ABB 6 Axis Feeder Robot IRB 1200 with Schunk Grab. Feed In/Feed Out Belt Conveyors. ABB Flexloader Vision. FSE E7326 Filtration, 950 Litre Capacity Coolant & Swarf Management System. Andreas Maier AMF 6906/61919 Hydraulic Equipment. This Cell Includes: Euro 250 Bowl Feeder on Stand with CVIC Digital Control. Desoutter ECS16-M20 Current Controlled Screwdriver. Robot Pendant ABB DSQC 679. Signal Tower Lights. Transformers. Weight of each Machining Centre Approx 2,400kg. Floor Space Required for Full Cell Approx 8,000mm x 6,500mm. 3 Phase Power Supply, 415 Volt. Fixtures Not Included. Swarf Bins Not Included. Viewing Recommended.

Condition: not inspected (used), Year of construction: 1995, travel distance X-axis: 650 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Mitsubishi, controller model: Meldas 50 M, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle nose: SK 40, Vertical Machining Center Manufacturer: LEADWELL Model: VMC 25 Year of manufacture: 1995 Control: Mitsubishi Meldas 50 M Technical specifications: - X-axis travel: 650 mm - Y-axis travel: 410 mm - Z-axis travel: 410 mm Ledpfx Ahszz S R Us Sjhn - Max. spindle speed: 6,000 rpm - Tool holder: SK 40 - Machine weight: approx. 4,200 kg - Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, controller manufacturer: Mazatrol, controller model: SmoothX, workpiece height (max.): 320 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 3,650 mm, total width: 2,984 mm, overall weight: 6,800 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, coolant supply: 70 bar, spindle motor power: 15 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained CNC 5-axis vertical machining centre. It is a Mazak CV5-500 from fitted with the Mazatrol Smooth X control system. The machine is in a like new condition with 1114 spindlehours. Technical specifications: Table dimensions: Ø 500 mm Lsdsz Ndxkspfx Ah Sshn Number of pallets: 1 Max. workpiece dimensions: 500 x 320 mm Max. workpiece weight: 200 kg X-axis travel: 730 mm Y-axis travel: 450 mm Z-axis travel: 470 mm C-axis (work table rotation): 360° B-axis travel: ±110 (220) ° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 15/11 kW Number of positions in tool magazine: 48 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of construction: 2006, functionality: fully functional, MATSUURA MAM72-35V 5 AXIS 32 PALLET MACHINING CENTER G-TECH 16i CONTROL 2006 MACHINE Supplied with 20 BT 40 tools and 5 pallets Ledpfxjx U D Two Ah Sohn 15 k Spindle . £65k plus vat.

Condition: good (used), Year of construction: 2014, Traverses X Y Z; 550 x 440 x 580mm, B axis -125/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum diameter 350mm, maximum workpiece height 300mm, maximum workpiece weight 60Kgs number of pallets 2, spindle taper BT40, Lhedpfezzzgxjx Ah Ssn 60 Station ATC, spindle speed 15,000rpm, Fanuc G-Tech 31iB control, through spindle coolant

Condition: excellent (used), HAAS Mini Mill 2 Vertical Machining Centre Year 2010 Serial number 1081104 X axis travel 508 mm Y axis travel 406 mm Lhodpfx Ahjz N Alwo Son Z axis travel 356 mm Table size 1,016 × 356 mm Maximum table load 227 kg Spindle nose to table 102–457 mm Maximum spindle speed 6,000 rpm Maximum spindle power 5.6 kW / 7.5 hp Spindle taper 40 taper — CT40 or BT40 to confirm Automatic tool changer 10 station

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,179 h, travel distance X-axis: 550 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 500 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis Exeron HSC 300/3 was manufactured in 2017. It features impressive travels of 550 x 340 x 355 mm and a clamping table size of 470 x 400 mm with a maximum load of 500 kg. The machine is equipped with a high-frequency spindle capable of speeds up to 42,000 rpm and a tool magazine with 40 positions. If you are looking to get high-quality machining capabilities, consider the Exeron HSC 300/3 vertical machining centre we have for sale. Contact us for further details. Lsdpfx Ahj Ad Hbke Sehn • Clamping table: 470 x 400 mm • Spindle speed: up to 42,000 rpm (StepTec high-frequency spindle) • Taper / tool interface: HSK 40-E • Usage: exclusively for machining graphite electrodes • Spindle time: 1,180 h Additional equipment • Workpiece probe: Heidenhain TS 460 + calibration mandrel • Tool measurement: integrated laser system MICRO COMPACT NT • Extraction system: Keller L-CUT-1-PM3-BE58 (graphite dust extraction) • Chip conveyor: No (machine equipped with graphite dust extraction instead)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Haas TM1 4 K SPINDLE TRAVELS X 762 MM Y 305 MM Z 406MM This machine has the option to run on 240v single phase 2003 machine in good condition Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM1 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. Ljdpfxeyfn Ile Ah Sshn The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required. The machine is 2.7m high with the head up and 2.2 with it down.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, Equipment: chip conveyor, documentation/manual, Machine Name - Okuma Machine Model - MX45VAE Y.O.M 2000 Descriptions - OSP 700M Spindle Speeds 7000 rpm BT40 taper Table Size 1000 mm x 460mm X – Axis Travel 560mm Ljdpfx Ahezair Us Sshn Y – Axis Travel 460mm Z – Axis Travel 450mm 20 station ATC Renishaw tool setter Renishaw work probe Coolant system and conveyor 2 x identical machines available

Condition: not inspected (used), Year of construction: 1994, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 426 mm, overall weight: 6,500 kg, number of slots in tool magazine: 20, FZ18W magnum rotary indexing table, Fanuc OM control Lhedpozbal Isfx Ah Sjn BT40 spindle, maximum spindle speed 8,000 RPM 20-tool changer 2 tables Nikken dividing head

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Lhedozd Dfispfx Ah Son Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1018, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller model: Fanuc oi-MB, spindle speed (max.): 8,000 rpm, operating hours of spindle: 12,550 h, number of spindles: 1, For sale: used AFM R-550 Harnaś milling machine. Vertical machining center. Year of manufacture: 2004. Serial number: 1018. X/Y/Z travel: 550 x 410 x 510 mm. Table size: 1120 x 360 mm. Spindle speed: up to 8,000 rpm. Lhjdpfxs Aa N H Ie Ah Sen BT40 taper. Fanuc control system. Spindle overhauled in October 2024. First owner. Please contact me for further details.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, CNC Vertical Machining Center HERMLE C 22 U With Siemens 840 D sl Operate control system Year of manufacture: 2016 Travel distances: X 450, Y 600, Z 330 Speed range: 20 – 18,000 rpm, stepless (HSK 63) With the following accessories: NC rotary table, 320 mm clamping surface Vertical tool changer with 55 magazine slots (HSK 63) Linear axes, dynamic version Internal coolant supply (IKZ 80 bar) Chip conveyor on the left Coolant system Compressed air nozzle at the spindle center Lhjdpe Ad Uh Ssfx Ah Son Bed flushing Automatic cabin door, automatic cabin roof Polycarbonate safety screens Rotating clear window (Rotoclear) Compressed air for measuring probes Electrical thermal compensation, Siemens 3D measuring probe, Heidenhain BLUM tool breakage detection/measurement Oil mist extraction 4 adjustable machine feet Operating manuals

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR300 5AX. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, Renishaw probing, 30 Station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 410 mm, Y Axis 610 mm, Z Axis 500 mm A Axis +30° to -120°, C Axis Continuous 360° TABLE: Diameter 300 mm Max Swing Diameter 300 mm, Max Weight on Table (evenly distributed) 100 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 FEEDRATES: Rapid and Jog (Max.) 36 m/min Cutting Feed Rate (Max.) 20 m/min Rotary Axis Speed 25 rpm BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Ljdpfx Ajzzax Tsh Sohn Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Through Spindle Coolant Coolant Flow Rate at Cutter 160 L/min Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X410 Y610 Z610 mm A360| 12000RPM | BT40 Accessories: 5 axis Table, Renishaw Probing, Side Mount Tool Changer, Swarf conveyor

Condition: used, Year of construction: 2002, Chiron FZ 15 W High Speed Twin Pallet Vertical Machining Centre. Serial No. 147-18 (2002) with Fanuc Series 18i-M Control, Dual Peiseler AWUP 160 NC Rotary Units, Air Bench Mist Filtration Unit, Swarf Conveyor. Country of Origin: Germany Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Ledpfx Aez Ar Ezjh Sohn

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, CNC Vertical Machining Center HERMLE C 22 U With Siemens 840 D sl Operate path control Year of manufacture: 2014 Travel ranges: X 450 Y 600 Z 330 Speed range: 20 – 18,000 rpm, infinitely variable (HSK 63) With the following accessories: NC rotary table, 320 mm clamping surface Vertical tool changer with 55 magazine slots (HSK 63) Linear axes, dynamic version Internal coolant supply (IKZ 80 bar) Chip conveyor, left-hand side Lodpfx As Ad Uppoh Sehn Coolant system Machine bed flushing Automatic cabinet door, automatic cabinet roof Polycarbonate safety screens Rotating clear window (Rotoclear) Compressed air for limit switches Electrical thermal compensation, Siemens 3D measuring probe, Heidenhain BLUM tool breakage detection/measurement system Oil mist extraction 4 adjustable machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 112112, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, controller manufacturer: Brother, controller model: Brother CNC-400, total height: 2,180 mm, total length: 1,560 mm, total width: 1,980 mm, table width: 300 mm, table length: 600 mm, table load: 150 kg, rotational speed (min.): 6 rpm, rotational speed (max.): 6,000 rpm, overall weight: 2,000 kg, spindle speed (min.): 6 rpm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 450 mm, spindle motor power: 4,100 W, number of spindles: 1, number of slots in tool magazine: 10, input voltage: 380 V, type of input current: AC, Equipment: documentation/manual, For sale is a Brother TC-225 machining center, manufactured in 1988. The machine comes from an ongoing production line and was last used recently. It is being sold due to a change in the company’s operations. Lsdpoz R Npajfx Ah Sohn

Condition: used, Year of construction: 2001, FANUC ROBO DRILL T14 iC COMPACT MACHINING CENTER Lhjdpeydvp Ujfx Ah Sen 14 Tool tool changer 5 off BT30 tools

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018 Röders RXP 400 CNC, Applications Ledpfx Ahez Tqwcj Sshn Ideal for high-precision machining applications, including: Micro-machining Electrode manufacturing Small mould manufacturing Precision components High-speed milling applications Documentation The Röders calibration protocol is available to document the calibration work carried out by the manufacturer's engineer.

Condition: repair required (used), Year of construction: 2008, operating hours: 25,000 h, functionality: not functional, machine/vehicle number: 191-65, workpiece length (max.): 400 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 350 mm, overall weight: 8,700 kg, spindle speed (max.): 20,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 2008 CHIRON FZ 15KS High Speed Plus 5-axis vertical machining center with Heidenhain CNC control. Machine weight approximately 8,700 kg. Chip conveyor included. The spindle is defective and has been removed. The spindle and available related components are stored in wooden crate and are included in sale. The spindle requires repair,rebuilding. The machine is sold as-is and where-is. Inspection is available in Ankara,TURKEY. Ljdpfoz Hmb Ajx Ah Sjhn Asking price: EUR 30.500, negotiable. EXW Ankara.

Condition: new, Year of construction: 2023, operating hours: 24 h, functionality: fully functional, KOMATECH KT360D – Dual Table Lhsdpfj Aardcox Ah Sen HIGH SPEED DUAL TABLE TAPPING CENTER – NEW IN OUR SHOWROOM (YEAR 2023) (0 HOURS SPINDLE RUNNING ) CNC control: FANUC 0i-MF PLUS Manual guide i Electronic handwheel for 3 axis X-axis travel: 520 mm Y-axis travel: 360 mm Z-axis travel: 360 mm Rapid feeds X, Y, Z: 50/50/60 m/min Axis acceleration: 2,4 G Table size /each side: 650x350 mm (2X) Distance table /spindle nose: 200-500 mm Admissible load on table: 200 Kg x2 Pneumatic jig interface on table Spindle speed: 15.000 rpm / direct drive Motor power (S1/S6): 5,5/18 Kw Torque motor (S1/S6): 17,5 Nm/57,3 Nm Spindle oil cooler by independent circuit Spindle cone: BT30 Turret magazine capacity: 21 tools Change tool time: 1,08 sec Max. tool length: 200 mm Cooling pump for external tool cooling Coolant Through Spindle 20 bar Washing down system in working area Chips conveyor scrapper type Metallic full top cover Transformer CE devices and certificate Net weight: 4.300 Kg

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. Lhodsy St Sdjpfx Ah Sjn The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2004, operating hours: 11,041 h, functionality: fully functional, machine/vehicle number: 132-37, nominal power (apparent): 28 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840 D, overall weight: 9,600 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer this used Chiron FZ 15K W vertical machining center, manufactured in 2004. It is equipped with a rotary table, and each of the two tables features a high-quality NC swivel table with a clamping bridge/zero-point clamping system from the manufacturer Spreizer. It was primarily used to manufacture smaller stainless steel parts. -Zero-point clamping system -Clamping/releasing pneumatically/hydraulically via push-button -Reneshaw TS 27 R for length measurement and breakage monitoring Sinumerik 840 D control system -Chip conveyor -The machine was operated exclusively with coolant and cutting oil. -The machine is equipped with a fire extinguishing system from Kraft und Bauer, which was regularly serviced by Kraft und Bauer. -The machine has age-related and usage-related wear and tear. It was primarily operated in a single-shift operation. It was regularly serviced and maintained by Chiron. We assess the optical condition as very good. The machine is immediately ready for full operation. Hour counter: 11041 hours Year of manufacture: 2004 Weight: 9600 kg Power supply: 3/N/PE Ledpfx Ahsz Dbtze Sshn Frequency: 50/60 Hz Operating voltage: 400 V Control voltage: 24 V Power: 28 kVA Rated current: 45 A Fuse: 50 A slow-blow/quick-blow If you have any questions or need more information, please send us a message or call us.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Brother TC-32BN QT – Key Technical Specifications Manufacturer: Brother, Japan Model: TC-32BN QT Year of Manufacture: 2013 Control System: Brother CNC-B00 X-axis travel: 550 mm Y-axis travel: 400 mm Z-axis travel: 415 mm Maximum spindle speed: 16,000 rpm Tool clamping taper: BT30 Tool magazine: 26 positions Lhsdpfx Aho Abv Nls Son Spindle motor power: 7.3 kW Through-spindle coolant: 70 bar NC rotary table: Kitagawa CKR160RY Chip conveyor: two-belt type, with filtration and a 540 l tank Machine weight: 4,600 kg