Used machining centers (vertical) X-axis travel up to 399mm for sale (32)

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, controller manufacturer: SELCA, controller model: 3045, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Eikon VMC 1000 was manufactured in 2000. It features a 10,000 RPM spindle, a 20-tool changer, and X/Y/Z travels of 1000mm, 500mm, and 400mm respectively. Equipped with a Selca 3045 control system, consider the opportunity to buy this Eikon VMC 1000 vertical machining centre. Contact us for more information. Kwedoycicxjpfx Ahzot • ATC capacity: 20 tool positions

Condition: good (used), Year of construction: 2020, 5-Axis CNC Machining Center - Universal - Manufacturer: MAZAK Machine Model: Variaxis J-500 Control Unit: Mazatrol SmoothG Year of Manufacture: 2020 Number of Controlled Axes: 5 TECHNICAL DATA Travel - X-Axis (mm): 350 - Y-Axis (mm): 550 - Z-Axis (mm): 510 - Swivel Range A-Axis (degrees): -120 / +30 - C-Axis (rotary axis, rotary and tilt table): (degrees): 360 Feed Rate X/Y/Z (mm/min): 8,000 Rapid Traverse - X-Axis (mm/min): 30,000 - A-/C-Axis: 10,800 degrees/min. Spindle - Max. Spindle Speed (rpm): 12,000 - Drive Power (ED) 100 / 40 (kW): 7.5 / 11.0 Tool Magazine - Tool Holder: BT40/CAT40 - Pull Stud: Yamazaki ANSI Type - Number of Tool Positions: 30 - Tool Diameter (mm): 90 - Tool Length (mm): 300 Machine Table: Swivel rotary table Pallet System - Pallet Changer: 2-position - Clamping Table Dimensions (mm): 500 x 400 Swivel Rotary Table - Rotary Table Diameter (mm): 500 x 400 - Max. Workpiece Weight (kg): 200 FEATURES + Through-spindle coolant 70 bar + Hinged belt chip conveyor + Oil mist extractor Kedpfx Ahsyabu Iozewt + Tool length measurement and breakage control + Additional interior lighting + Signal tower (3-color) Subject to change and errors in technical details and specifications.

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, Used HSC machine RXP400DS/ RXD5 -overhauled- The machine is completely overhauled, tested and measured in our company. The machine again meets the new machine tolerance! Working area: Kwjdolzhhcjpfx Ahzet - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min in all linear axes. - Network connection: - Tool measuring laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction -RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - Tool changer 12-way row, optional tool changer conversion to chain - High-precision option - Remote maintenance via Teamviewer - Transport dimensions of machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: Approx. 3,000 kg A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, used HSC machine RXP800DS - overhauled - Workspace: - X axis: 200 mm - Y-axis: 294 mm - Z axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feeds 0 - 40,000 mm / min in all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1 chuck - Emusion cooling with Oil-mist-suction - RMS Main Job manager Kwsdpfxjlzhhks Ahzet - Spindle max. 60,000 rpm HSK 25 - Tool changer: 24 chain changer, able to operate while machining - High precision option - Remote maintenance via Teamviewer - Transport dimensions machine: W 2,425 x L 1,925 x H 2,700 mm - Weight: approx.3,000 kg The machine is completely checked, measured and overhauled in-house. Please arrange a viewing appointment with us.

Condition: excellent (used), Year of construction: 2000, Control unit: Heidenhain TNC 426 Clamping area: 345x295 mm X=240 mm Y=240 mm Z=240 mm Speed range: 300-48,000 rpm Kodpfxox Tqgzj Ahzowt

Condition: excellent (used), Year of construction: 2017, Heidenhain TNC 620 control Travel X/Y/Z: 350 x 250 x 300 mm Spindle speed: 12,000 rpm Kedjx Rpahopfx Ahzewt Rotary and swivel table Tool magazine for 50 tools, ISO 30 Chip conveyor LANG Automation

Condition: ready for operation (used), Year of construction: 2007, Main Drive Spindle speed range 22000 Tool taper BT30 Kedpox D Nk Defx Ahzowt Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 200 mm This Brother TC 31AN was manufactured in 2007. It features a robust Fanuc machining center control, a high-speed spindle up to 22,000 rpm, and a BT30 spindle taper. The work table measures 500 x 270 mm, complemented by a 26-slot tool magazine. Specialized with a rotary changer table for efficient fixture loading. Contact us for further details regarding this machine. Application Types Milling

Condition: good (used), Year of construction: 2010, Machining Centre Sugino Xion-II-5AX-CE Manufacturer: Sugino Machine Limited Japan Model: Xion II 5AX CE Year of manufacture: 2010 Number of axes: 5 Travel distance X axis: 300 mm Travel distance Y axis: 300 mm Travel distance Z axis: 200 mm A axis swiveling range: -90° to +90° C axis rotation: 360° Maximum tool diameter: 40 mm Maximum tool weight: 15 kg Spindle speed: 40,000 rpm Tool holder: HSK-E32 Positioning accuracy X, Y, and Z axes: 0.002 mm Repeatability X, Y, and Z axes: ±0.001 mm Machine weight: 2,800 kg No guarantee is given for the correctness, completeness, or currentness of the information provided. Kjdjx Hqwgjpfx Ahzswt

Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Year of manufacture: 2013 Axes: 5 Travel X axis: 300 mm Travel Y axis: 300 + 100 mm Travel Z axis: 330 mm Swivel range A axis: -90° – +90° Rotary axis C: 360° Table load capacity: 200 kg Maximum tool diameter: 40 mm Maximum tool weight: 3 kg Maximum total tool mass: 33 kg Number of tools: 21 Spindle speed: 24,000 rpm Kedpfx Ajx Hqwashzjwt No liability is assumed for the accuracy, completeness or timeliness of the information provided.

Condition: good (used), Year of construction: 2012, Hasegawa PM150 Machining Center Manufacturer: Hasegawa Model: PM 150 Year of manufacture: 2012 Kodpfxsx Hqv Nj Ahzowt Number of axes: 4 Travel X axis: 150 mm Travel Y axis: 225 mm Travel Z axis: 200 mm Swivel axis: YES Rapid traverse X, Y, Z: 30 m/min Table load capacity: 80 kg Table working surface: 300 × 260 mm T-slot table: 12H7 × 5 Spindle taper: HSK E32 Spindle speed: 100 to 30000 rpm Tool magazine: 10 tools Max. tool size: Ø50 mm Memory capacity: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: used, Year of construction: 2016, travel -x axis 350 mm travel -y axis 550 mm travel -z axis 510 mm travel -A axis -120 / +30 ° c-axis 360 ° control MAZATROL Matrix Nexus 2 number of spindle speeds 12.000 U/min numbers of positions in the tool changer 30 tool taper SK 40 weight of the machine ca. 7,0 t 5-axis machining center | MAZAK - VARIAXIS j-500 equipped with internal coolant supply (15 bar) , a swivel axis, and a rotary table (ø 500). The machine has only approx. 4.000 H spindle hours. The machine is in a very well-maintained condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Kwjdpew Ahywofx Ahzst #Tags: VARIAXIS j500 | VARIAXIS j 500 | VARIAXISj500

Condition: excellent (used), Year of construction: 2017, operating hours: 2,609 h, functionality: fully functional, machine/vehicle number: JPN112245, travel distance X-axis: 200 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 305 mm, spindle speed (max.): 10,000 rpm, For sale: Brother machining center, model M140x2. Year of manufacture: 2017, purchased new in 2018. This is a 5-axis milling-turning center, where the workpiece rotates at 2000 rpm and can be turned. The machine is virtually as new, as we never produced the products it was purchased for. Kjdpfx Aheyahkiszswt We only made prototypes and samples. All equipment is included, purchased specifically for this machine, valued at almost €15,000.

Condition: new, Year of construction: 2026, travel distance X-axis: 280 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 280 mm, feed length Y-axis: 280 mm, feed length Z-axis: 400 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, nominal power (apparent): 6 kVA, torque: 57 Nm, controller manufacturer: Siemens, controller model: S828 D, workpiece length (max.): 150 mm, workpiece width (max.): 80 mm, workpiece height (max.): 180 mm, workpiece diameter (max.): 80 mm, workpiece weight (max.): 3 kg, Equipment: rotational speed infinitely variable, DANE CHARACTERISTIC table Working surface of the table 750 x 270 mm Number of T-slots in the table 3 Width of the T-slots in the table 14 mm Distance between the T-slots in the table 100 mm Maximum load of the table 100 kg Maximum travel Longitudinal axis "X" 280 mm Transverse axis "Y" 280 mm Vertical axis "Z" 400 mm Rapid traverse Longitudinal "X" 30 m/min Transverse "Y" 30 m/min Vertical "Z" 20 m/min Spindle Tool holder BT40 or SK40* Tool clamping force 8 kN Servo axis motors In longitudinal axis "X" 3.5/6 Nm In transverse axis "Y" 3.5/6 Nm In vertical axis "Z" 3.5/6 Nm Positioning accuracy of the linear axes +/- 0.005 mm Main drive motor Power S1/S6 (Siemens) 4.3/6.4 kW Maximum torque on spindle S1/S6 38/57 Nm Maximum spindle speed 8000 rpm Tool magazine Number of tools/option* 8/16* Maximum tool diameter 80 mm Maximum tool length 150 mm Maximum tool weight 3 kg Overall dimensions Length ~1360 mm Kwedpfeu Sklajx Ahzst Width ~2200 mm Height /maximum travel of the Z-axis/ ~2550 mm Coolant tank volume 130 l Weight ~1500 kg Standard accessories: SIEMENS CNC control system ✓ Interpolation in 3 axes ✓ Ball screw spindles, lubricated with solid lubricant ✓ Water-cooled tool cooling system ✓ 8-station tool magazine, swivel arm BT40 or SK40 ✓ Electric handwheel ✓ Telescopic guide covers ✓ Cabin to protect the work area ✓ Lighting system with lamp ✓ Graphic programming support - predefined processing cycles ✓ LCD display 8" (S808) - 10.4" (S828) ✓ Thread cutting without compensation holder (fixed) ✓ Air nozzles at the end of the spindle ✓ Spindle cooling system ✓ TRIM MicroSol 515 cooling lubricant concentrate ✓ Safety system to prevent opening: front doors of the machining area / doors of the control cabinet ✓ Air pressure sensor for detecting low pressure ✓ Electrical installation for mains supply 3x400V, 50Hz ✓ USB port on the front panel of the machine ✓ Standard paint color similar to RAL 5000 / machine base; RAL 7035 ✓ Machine status display ✓ Operating and programming instructions ✓ Special equipment and special design..: - Second 8-station tool magazine Swivel arm ISO40/BT40 - Spindle cooling 6-9 bar - RENISHAW TS 27R tool measuring unit - RENISHAW OMP40 workpiece measuring unit with cycles - Separate spindle cooling unit for machining colored materials and plastics - Handwheel on the bar (pilot) - Tool trolley - Precision clamping device - Automatically opening doors - Additional Ethernet output on the control cabinet for transferring programs between the computer and the machine - Siemens - SinuTrain software

Condition: like new (used), Year of construction: 2017, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: D200z, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, As-new D200Z with Large Tool Changer & Erowa Compact 80 For sale is a very well-maintained D200Z with very low operating hours, a large 40-position tool changer, and an Erowa Compact 80 with ITS 100 interface preparation. Equipped with AFT oil mist extraction. The machine is currently powered up and can be inspected at any time. Immediate commissioning possible. ✅ Technical Details & Features Machine: D200Z – High-precision machining center Condition: As-new, meticulously maintained Operating hours: Very low Tool changer: Large 40-position changer for efficient machining Additional equipment: Erowa Compact 80 with ITS 100 preparation ✅ Optional Extensive Accessories Available Premium tool holders from BIG KAISER and WNT Vices for ITS 100 Erowa from SCHUNK Shrink-fit tool holders from KEMMLER Vero Visi CAD/CAM system with 5-axis module incl. postprocessor ✅ Your Advantages Ready for immediate use – machine is powered up Kodpfx Ahjxbdfkjzowt Very well-maintained, minimal use → virtually as-new Flexible expansion due to extensive accessories Ideal for precision parts, tool and mold making 📌 Price on request – inspection by appointment only.

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Kwsdpjxx U Ecefx Ahzet

Condition: good (used), Alzmetall BAZ 15 CNC – Vertical Machining Center • 3 axes • Heidenhain control For sale is an Alzmetall BAZ 15 CNC, a compact and robust vertical machining center equipped with a Heidenhain control system. The machine is still operational and can be inspected under power. It is in well-maintained, technically flawless condition. Technical Data Manufacturer: Alzmetall Model: BAZ 15 CNC Application: Milling Machine type: Vertical machining center Control system: Heidenhain Weight: 3,200 kg Table load: 500 kg Axes: 3 X travel: 600 mm Y travel: 400 mm Z travel: 600 mm Spindle speed: 9,000 rpm Tool magazine: 24 positions If interested, simply write or call. Ksdpfx Aexxxu Uehzewt

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 680 kg Movement X-Axis Movement 304 mm Z-Axis Movement 305 mm Y-Axis Movement 254 mm Main Drive Number of axis 5 Spindle Speed 30000 RPM Spindle motor power 3.7 kW Table Kwedex D Ip Sspfx Ahzot Table load 68 kg This 5-axis HAAS OM-2A was manufactured in 2013 and features a 3+2 configuration, with a spindle speed of 30,000 RPM and a motor power of 3.7 kW. It includes a 20-tool automatic tool changer and can handle a maximum table load of 68 kg. If you are looking to get high-quality milling capabilities, consider the HAAS OM-2A machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, operating hours: 937 h, General Data Measurements width 1530 mm Measurements depth 775 mm Measurements height 2253 mm Machine weight 1800 kg Control Unit Brand Siemens Model Sinumeric 840D Main Drive Spindle speed range 40000 rpm Number of axis 5 Movement X-Axis Movement 120 mm X-Axis Rapid Traverse 10 m/min X-Axis Accuracy P10 μm Y-Axis Movement 120 mm Y-Axis Rapid Traverse 10 m/min Y-Axis Accuracy P10 μm Z-Axis Movement 200 mm Z-Axis Rapid Traverse 10 m/min Z-Axis Accuracy P10 μm Table Table load 10 kg Tools Max tool diameter 49 mm Max tool length 130 mm Type of tool holder HSK-32 Media Kwodpfxsx D Naxo Ahzot Power consumption 25 kVA Additional Equipment Workpiece Measurement: DMG PP-400 Infrared probe Tool Measurement: RS NC-4 Coolant Conditioning Equipment: KM 10 This 5-axis DMG ULTRASONIC 10 was manufactured in 2011. It features a Siemens Sinumeric 840D control, a spindle with 40,000 rpm max speed, and a tool magazine with 60 slots. The machine offers a compact footprint and includes options like a DMG PP-400 Infrared probe and RS NC-4 tool measurement. If you are looking to get high-quality milling capabilities consider the DMG ULTRASONIC 10 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Kjdpslz Rvljfx Ahzjwt Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2012, Hasegawa PM 150 CNC machining center TECHNICAL DATA Spindle Spindle nose: HSK-E32 Speed: 100 - 30`000 rpm Spindle motor: 3.0 / 4.5 kW Tool changer Capacity: 10 Tool - tool change time: 1.8 sec Travel distances X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° OFFER SCOPE U.A: (non-exhaustive list): Hasegawa PM 150 CNC machining center 10-position tool changer Lehmann EA-507 rotary axis transformer Fire extinguishing system Complete operating documentation Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information provided Kodpfx Asu E El Iohzswt

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,019 h, functionality: fully functional, machine/vehicle number: 278346, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel and Axes X-Axis: 350 mm Y-Axis: 550 mm Kodpfx Ahjw Nv Tkozowt Z-Axis: 510 mm A-Axis: -120° / +30° C-Axis: 360° Rapid Traverse Speed XYZ: 30 m/min Clearance under Spindle: 50 mm ∼ 560 mm Spindle Spindle Motor Power: 11 kW Spindle Speed: 12,000 rpm Table Table Size: 500 x 400 mm Max. Workpiece Weight: 200 kg Tool Data Maximum Tool Diameter: 90 mm Maximum Tool Diameter with Adjacent Pockets Empty: 130 mm Maximum Tool Length: 300 mm Tool Positions: 18 stations Tool Change Time (chip to chip): 6.2 s MACHINE DETAILS Control: Mazatrol Smooth Dimensions Machine Dimensions (L x W x H): 3,226 x 1,900 x 2,840 mm Weight: 6,900 kg Operating Hours Machining Hours: 11,019 h Power-On Hours: 29,233 h EQUIPMENT Oil Mist Separator Through-Spindle Cooling Renishaw Probe

Condition: good (used), Year of construction: 2007, Primacon PFM 24 NGD / 4 axes, Kjdpfx Aov Tb Eishzewt Year of manufacture 2007, Heidenhain iTNC 530 control, X/Y/Z travel 240/240/240 mm, Fischer Precise spindle up to 50,000 rpm, HSK F 32/25 E chuck, 4-axis Hirschmann, Length probe, 32-station tool magazine

Condition: good (used), Year of construction: 2012, Primacon PFM 24 NGD / 5 axes, Year of manufacture 2012, Heidenhain iTNC 530 control, X/Y/Z travel 240/240/240 mm, 40-station tool magazine, HSK F 32/25 E spindle mount, Fischer Precise spindle up to 50,000 rpm, 4+5 axes Howimat dividing head, Kwjdpfxev Tb Htj Ahzst Length measuring probe, Renishaw 3D probe, Z axis overhauled in 2023

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 010-001, travel distance X-axis: 400 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 300 mm, Machine purchased retrofitted in 2018 at GF Kedewg R N Aepfx Ahzjwt

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale! Kwedpfxowth Sbj Ahzst