Used Bevel Gear Lapping Machine for sale (70,017)

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min Crsdpoymf Daefx Akqef table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: ready for operation (used), Lapping machine, Hahn & Kolb - LHD 0 - Machine from a state institution / original condition - Lapping disk diameter 400 mm - Max. workpiece height 120 mm - Max. distance between the cast lapping disks 80 mm - Speed range 40-80-160 rpm - Speed - drive motor 700/1400/2800 rpm - Total power 1.8 - 2.7 kW - Turning device - manually operated - Various lapping mandrels - Documentation Cedpjzbz Ttefx Akqerf Dimensions: L x W x H 1.4 x 1.3 x 1.9 meters / Weight 1700 kg Errors and omissions excepted.

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm Cjdpfxew Rf S Se Akqorf max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation

Condition: reconditioned (used), Year of construction: 2006, operating hours: 35,435 h, functionality: fully functional, total length: 5,940 mm, total width: 1,800 mm, total height: 2,400 mm, year of last overhaul: 2023, Completely overhauled by the main dealer with genuine parts in 2023. Was hardly used, and looked after throughout. The machine has been hardly used and it is fully operational and ready to go. Transport is not included, but can be arranged for a fee. Subject to location. Crsdpsvw At Asfx Akqof

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm Cjdpfxovkpu Hs Akqjrf max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: used, Year of construction: 1991, functionality: fully functional, Mikron A35, complete with accessories, in perfect working order. Crsdozcvxyspfx Akqsf

Condition: used, Year of construction: 2004, workpiece diameter 125 mm module 4 control SIEMENS SINUMERIK travel -x axis 105 mm travel -y axis 40 mm travel -z axis 500 mm workpiece diameter 17 - 39,5 mm workpiece height 6 - 15 mm Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Crsdpfx Akox Szm Aoqsf #Tags: ZH125 | ZH-125

Condition: used, Year of construction: 2008, control Siemens 840D Crsdswzypnepfx Akqjf

Condition: good (used), max. wheel diameter 145 mm gear width 110 mm max. module 2 min. module 0,3 Crjdpfxsy Ivdho Akqef turning speeds 112 - 1000 U/min min. number of teeth 6 clamping length max. 150 mm total power requirement 3,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 0,8 x 1,4 m

Condition: good (used), Code: 0471 Brand: BAUSOLA Model: SB/1 - CE Standard Automatic bevelling machine for shutter slats - CE Standard Technical data: Automatic mechanical milling machine to bevel edges with automatic copying device that guarantees perfect 30 ° chamfering or rounding on the perimeter of flat profiles Palette length from mm 130 to 800 Palette width from mm 15 to 100 Palette thickness from mm 6 to 30 Crjdex I A Rnopfx Akqef Production/hour approx. 1500 pieces Overall dimensions: mm 1500 x 570 x 1370 h Weight kg 135

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Max diam 750mm, Z axial travel 900mm, X Radial travel 380mm, table 630mm, CNC Siemens 802D in Z and X. Weight ca 14.000kg Csdpfx Aezbt Iiskqjrf

Condition: good (used), max. wheel diameter 630 mm gear width 375 mm max. module 10 clamping table 550 mm table hole 125 mm milling spindle speeds infinitely variable 62 - 390 U/min taper MORSE 5 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 Credpfx Akjua It Uoqof milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 21 kVa weight of the machine ca. 8,2 t Equipment of the machine: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport - Year of construction approx. 1976

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m Codpfxsul El To Akqorf incl. suction

Condition: good (used), Year of construction: 2001, table diameter 200 mm workpiece height 100 mm number of wheels 1 Control Robot CNC total power requirement 6 kW Credstt Tb Dspfx Akqsf weight of the machine ca. 1,8 t dimensions of the machine ca. 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - Fire protection device CONTROL axes; 4 axes + 2 programmable robots - simultaneously linear interpolation of the 4 axes + cylindrical interpolation of 2 robot axes

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm Cedpfx Aketycg Soqsrf table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Condition: good (used), Year of construction: 1975, functionality: fully functional, Largest module: 10 Maximum gear diameter: 800 mm Weight: 7.2 tons. Crodjzcpc Sepfx Akqsf

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data Credpfsxq Hgcox Akqof – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Power of the main drive motor: 10 HP Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) Codpfx Ajv T Nqajkqorf - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance Crsdpju A I Elefx Akqsf - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Gewicht - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: good (used), max. wheel diameter 600 mm max. module 6 range L-W-H 2540 x 1500 x 1920 mm table diameter 160 mm weight of the machine ca. 3,6 t High-performance gear hobbing machine Tooth helix angle 15° Tooth width 270 mm Wheel diameter 620 mm Cedpfsy E Twgsx Akqorf Tooth helix angle 30° Tooth width 250 mm Wheel diameter 610 mm Tooth helix angle 45° Tooth width 200 mm Wheel diameter 500 mm Tooth angle 60° Tooth width 100 mm Wheel diameter 450 mm Maximum cutter diameter 105 mm Maximum cutter width 115 mm Clamping table diameter 420 mm Bore of clamping table 75 mm Depth of bore below table surface — mm Diameter of workpiece clamping wheel 450 mm of clamping mandrel 30 mm of milling mandrels 22–27–32 mm

Condition: used, Year of construction: 2012, Technical details: Crsdpfx Akoy Amlloqsf max. wheel diameter: 260 mm gear width: 320 mm max. module: 5 weight of the machine ca.: 21 t dimensions of the machine ca.: 8,71 x 5,97 x 3,49 m no. of teeth: 1...999 max. helix angle: +45/-45 ° pitch min.: 0,1 mm pitch max.: 1000 mm X-axis: 345 mm y-axis: 250 mm Z-axis: 320 mm b-axis: 360 ° c-axis: 360 °

Condition: new, functionality: fully functional, machine/vehicle number: 01.3206969317.0003.00, power: 2.2 kW (2.99 HP), rotational speed (max.): 1,400 rpm, input frequency: 50 Hz, type of input current: AC, overall weight: 89 kg, torque: 1,700 Nm, protection type (IP code): IP54, Voltage: 230/400 V (three-phase current) Brake voltage: 400 V AC Insulation class: B Crodou Datqepfx Akqsf This bevel geared motor is a powerful drive solution that is ideal for demanding industrial applications. With its robust design and high efficiency, this motor offers reliable performance at variable speeds. The integrated bevel gearbox ensures a compact design and enables optimum power transmission. It is particularly suitable for conveyor technology, mechanical engineering and other industrial applications where precision and durability are required.

Condition: used, Year of construction: 2006, Technical details: max. wheel diameter: 300 mm max. module: 7 weight of the machine ca.: 15 t table turning speeds: 100 U/min table diameter: 180 mm hob turning speeds: 750 U/min max. hob diameter: 300 cutter length max.: 230 mm Codpoyz Sd Rofx Akqerf Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion *

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min Crjdpfsvzhf Ssx Akqjf axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 180 mm Cedpfxoyzxbio Akqjrf max. module: 7 hob turning speeds: 200-2000 U/min min. number of teeth: 4 excluding conveyor belt *