Gear Hobbing Machine - Horizontal

PFAUTER P 160 H

Condition: used, Year of construction: 1992, max. wheel diameter 175 mm gear width 710 mm max. module 4,5 min. module 0,5 weight 4,5 t total power requirement 10,5 kW Equipment/accessories: Isdpfovzhfrox Ah Ujtr - Milling arbors - Clamping devices - Documentation

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet Itjdsxcgtgopfx Ah Uer - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Year of construction: 1970, condition: ready for operation (used), Wheel diameter: 160mm, max. wheel width: 355mm, module range: 0.5-4.5, max. cutter diameter: 115mm, max. cutter length: 105mm, cutter head swivel range: 120°, speed: 400rpm, distance between centers: 410mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible. Ijdpoxph Skefx Ah Uotr

Condition: used, Year of construction: 1992, max. wheel diameter 160 mm gear width 710 mm Ijdpfx Ajvz Edreh Ustr max. module 4,5 min. module 0,5 milling spindle speeds (infinitely variable) 70 - 400 U/min centre distance 800 mm total power requirement 11 kW weight of the machine ca. 4,7 t dimensions of the machine ca. 3,6 x 3,0 x 2,0 m 2-cut-cycle, shifting, very nice condition. Change gears, arbors.

Condition: excellent (used), Year of construction: 2013, turning height: 2,150 mm, turning diameter: 2,000 mm, Swing diameter 2,000 mm, turning height 2,150 mm, X-axis 1,150 mm, rotary table diameter 1,800 mm, chip conveyor, 25-position tool changer, fleece filter cleaning system, Isdpfsw Edvyox Ah Uotr

Condition: used, Year of construction: 1969, max. wheel diameter 160 mm gear width 355 mm max. module 4,5 min. module 0,5 centre distance 450 mm total power requirement 11 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2x17,1,6 m Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Milling head - swivels 120 ° Milling cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Changing wheels - milling arbors - Clamping device Iodpsvz Ec Ijfx Ah Ujtr Dra8M7 - documentation

Condition: like new (used), Year of construction: 2020, operating hours: 400 h, travel distance X-axis: 550 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 12,000 rpm, Machine Details Stock-No. 1105-04006 Type of machine: Vertical Machining Center Manufacturer: DMG MORI Model: M 1 Year of manufacture: 2020 Control type: CNC Stored at: HAGUENAU, FRANCE Country of origin: Germany Availability: IMMEDIATE Shipping terms: EX WORKS Technical specifications: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm table size: 790 x 560 mm Spindle taper: ISO SK 40 Spindle speed range: 10,000 rpm Feed rates (longitudinal/cross/vertical): 1 - 30,000 mm/min Rapid traverse (longitudinal/cross/vertical): 30 m/min Number of tools in magazine: 20 Max. workpiece diameter at full tool load: 80 mm Workpiece diameter with 2 vacant positions: 140 mm Max. workpiece length: 300 mm Max. tool weight: 7 kg Max. table load: 600 kg Spindle drive: 9 / 11 kW CNC control: SIEMENS 828D Total connected load: 30 kVA Additional Information: CNC SIEMENS 828 D Only 1,800 spindle hours Very good condition Isdpjtpcnnjfx Ah Uetr Electronic handwheel Chip conveyor Tool setter

Condition: used, Year of construction: 2023, In the market for a Top of the Range Miyano? Then have a look at this one! 18 months old and just over 1000 hours on the clock…it is as new! Still on site where it can be seen under power. The following is from Miyano’s Spec sheet: The Miyano ABX-64SYY – is a Top of the range, twin spindle, twin turrets with Y-axis on each turret. The ability to machine simultaneously at the left and right spindles using the upper and lower turrets, both featuring a Y-axis function, means that complete front and back machining of products with complex shapes can be accomplished simply and in a short time. High rigidity and high torque with 40 Nm driven tools. The use of rigid 40 Nm driven tool drives capable of heavy cutting ensures stable milling. Two turrets with a total of 24 tool positions, all driven, handle complex machining just like a machining centre. This machine also features the optional parts conveyor, Hainbuch collet chucks on both spindles, high pressure coolant, probing and a steady rest that’s mounted on the lower turret. Machining Capacity and Chuck System Maximum Machining Diameter of Bar Work SP1/SP2 ø64/51mm Collet Chuck SP1/SP2 Stationary Power Chuck SP1/SP2 6″/6″ hydraulic drive Standard Turning Length 125mm Spindle Spindle Nose SP1/SP2 A2-8/A2-6 Spindle motor(30min./Cont.) SP1 15/11kW SP2 7.5/5.5kW Spindle Speed Range SP1 50 – 5,000min-1 40 – 4,000min-1 SP2 50 – 5,000min-1 Turrets(Upper L/R Turrets & Lower Turret) Type of Turret 2 x 12 Station Turret Shank Height of Square Turning Tool □20mm Diameter of Drill Shank ø40mm ø20mm ø25mm Slide Stroke X1, X2 axis 190mm Z1/Z2 axis 550mm/721mm Y1, Y2 axis ±40mm Zs axis 756mm Rapid Traverse Rate X1, X2 axis 16m/min Z1/Z2 axis 30/20m/min Y1, Y2 axis 12m/min Zs axis 30m/min Driven Tools Maximum Number of Revolving Tools 24 Rotation speed of Driven Tools 60 – 6,000min-1 Driven Tool Motor AC Servo 4.5kW Machine Dimensions Machine Height 2,222mm Floor Space 3,290×2,204mm Machine Weight 10,900kg Name of the machine: Miyano ABX-64SYY Itedpfxjw I D Duo Ah Uor

Condition: used, Year of construction: 2017, turning diameter: 658 mm, controller manufacturer: MAZATROL, controller model: SMOOTH X, number of spindles: 2, CONTROLS .. CNC controls MAZATROL SMOOTH X BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 1 WORKING RANGE TURNING .. turning diameter (max): 658 mm .. bar diameter (max): 80 mm .. worpiece length max.: 1519 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 30 kW .. c-axis: yes Itedexu Ufzspfx Ah Uer COUNTER SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 26 kW .. c-axis: yes X/Z SLIDE .. Z-axis travel: 1585 mm .. X-axis travel: 615 mm .. Y-axis travel: 250 mm .. rotating range B-axis up to: 210 ° .. rapid traverse Z: 50000 mm/min .. rapid traverse X: 50000 mm/min .. rapid traverse Y: 40000 mm/min X/Z SLIDE .. rotating range B-axis up to: 0.0001 ° .. - rotation speeds (max): 12000 /min .. - drive power: 24 kW TOOL MAGAZINE .. number of positions: 72 .. tool diameter max.: 90 mm .. - with free neighbour positions: 125 mm .. tool length max.: 400 mm .. tool weight max.: 12 kg DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4910 mm .. space requirements -front/back-: 2800 mm .. total height: 2720 mm .. total weight approx.: 16900 kg ATTACHMENTS (TURNING) .. hydraulic system: yes .. European CE standards: yes

Condition: good (used), Year of construction: 1990, 1 used surface grinding machine make Rosa type ER 10 year of construction 1990 Technical data Itsdpfxeuuik Se Ah Uor Travel 1000 x 600 mm Magnetic plate 1000 x 600 mm maximum sanding height 400 mm longitudinal speed 2-30 m/min Transverse speed infinitely variable 0-3 m/min Sanding spindle speed 1450 rpm Grinding wheel diameter 400 x 60 x 127 mm Grinding wheel motor power 7.4 KW Dimensions 3900 x 20 50 x 2400 mm Weight 6 tons